The make command is same as old configs layout:
under acrn-hypervisor folder:
make hypervisor BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]
under hypervisor folder:
make BOARD=xxx SCENARIO=xxx [TARGET_DIR]=xxx [RELEASE=x]
if BOARD/SCENARIO parameter is not specified, the default will be:
BOARD=nuc7i7dnb SCENARIO=industry
Tracked-On: #5077
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
On WHL platform, we need to pass through TPM to Secure pre-launched VM. In order
to do this, we need to add TPM2 ACPI Table and add TPM DSDT ACPI table to include
the _CRS.
Now we only support the TPM 2.0 device (TPM 1.2 device is not support). Besides,
the TPM must use Start Method 7 (Uses the Command Response Buffer Interface)
to notify the TPM 2.0 device that a command is available for processing.
Tracked-On: #5053
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Previously the VM kernel bootargs for pre-launched VMs and direct boot mode
of SOS VM are built-in hypervisor binary so end users have no way to change
it. Now we provide another option that the multiboot module string could be
used as bootargs also. This would bring convenience to end users when they
use GRUB as bootloader because the bootargs could be configurable in GRUB
menu.
The usage is if there is any string follows configured kernel_mod_tag in
module string, the string will be used as new kernel bootargs instead of
built-in kernel bootargs. If there is no string follows kernel_mod_tag,
then the built-in bootargs will be the default kernel bootargs.
Please note kernel_mod_tag must be the first word in module string in any
case, it is used to specify the module for which VM.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
The multiboot2 cmdline would be used as hypervisor cmdline, add parse logic
for the case that hypervisor boot from multiboot2 protocol.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously sanitize_multiboot_info() was called after init_debug_pre() because
the debug message can only print after uart is initialized. On the other hand,
multiboot cmdline need to be parsed before init_debug_pre() because the cmdline
could override uart settings and make sure debug message printed successfully.
This cause multiboot info was parsed in two stages.
The patch revise the multiboot parse logic that split sanitize_multiboot_info()
api and use init_acrn_multiboot_info() api for the early stage. The most of
multiboot info will be initialized during this stage and no debug message need
to be printed. After uart is initialized, the sanitize_multiboot_info() would
do sanitize multiboot info and print needed debug messages.
Tracked-On: #4885
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add FADT table support to support guest S5 setting.
According to ACPI 6.3 Spec, OSPM must ignored the DSDT and FACS fields if them're zero.
However, Linux kernel seems not to abide by the protocol, it will check DSDT still.
So add an empty DSDT to meet it.
Tracked-On: #4623
Signed-off-by: Li Fei1 <fei1.li@intel.com>
hv: acpi: changed the enum "acpi_dmar_type" to macros to pass the
MISRA-C check
Tracked-On: #4535
Signed-off-by: Qian Wang <qian1.wang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MADT is used to specify the GSI base for each IO-APIC and the number of
interrupt pins per IO-APIC is programmed into Max. Redir. Entry register of
that IO-APIC.
On platforms with multiple IO-APICs, there can be holes in the GSI space.
For example, on a platform with 2 IO-APICs, the following configuration has
a hole (from 24 to 31) in the GSI space.
IO-APIC 1: GSI base - 0, number of pins - 24
IO-APIC 2: GSI base - 32, number of pins - 8
This patch also adjusts the size for variables used to represent the total
number of IO-APICs on the system from uint16_t to uint8_t as the ACPI MADT
uses only 8-bits to indicate the unique IO-APIC IDs.
Tracked-On: #4151
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
This is to enable relocation for code32.
- RIP relative addressing is available in x86-64 only so we manually add
relocation delta to the target symbols to fixup code32.
- both code32 and code64 need to load GDT hence both need to fixup GDT
pointer. This patch declares separate GDT pointer cpu_primary64_gdt_ptr
for code64 to avoid double fixup.
- manually fixup cpu_primary64_gdt_ptr in code64, but not rely on relocate()
to do that. Otherwise it's very confusing that symbols from same file could
be fixed up externally by relocate() or self-relocated.
- to make it clear, define a new symbol ld_entry_end representing the end of
the boot code that needs manually fixup, and use this symbol in relocate()
to filter out all symbols belong to the entry sections.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
GRUB multiboot2 doesn't support relocation for ELF, which means it can't
load acrn.32.out to other address other than the one specified in ELF
header. Thus we need to use the raw binary file acrn.bin, and add
address/entry address/relocatable tags to instruct multiboot2 loader
how to load the raw binary.
Tracked-On: #4441
Reviewed-by: Fengwei Yin <fengwei.yin@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Initialize efi info of acrn mbi when boot from multiboot2 protocol, with
this patch hypervisor could get host efi info and pass it to Linux zeropage,
then make guest Linux possible to boot with efi environment;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize module info and ACPI rsdp info of acrn mbi when boot from
multiboot2 protocol, with this patch SOS VM could be loaded sucessfully
with correct ACPI RSDP;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize mmap info of acrn mbi when boot from multiboot2 protocol,
with this patch acrn hv could boot from multiboot2;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add multiboot2 header info in HV image so that bootloader could
recognize it.
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize and sanitize a acrn specific multiboot info struct with current
supported multiboot1 in very early boot stage, which would bring below
benifits:
- don't need to do hpa2hva convention every time when refering boot_regs;
- panic early if failed to sanitize multiboot info, so that don't need to
check multiboot info pointer/flags and panic in later boot process;
- keep most code unchanged when introduce multiboot2 support in future;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The patch re-arch boot component header files by:
- moving multiboot.h from include/arch/x86/ to boot/include/ and keep
this header for multiboot1 protocol data struct only;
- moving multiboot related MACROs in cpu_primary.S to multiboot.h;
- creating an independent boot.h to store acrn specific boot information
for other files' reference;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- It is meaningless to enable debug function in parse_hv_cmdline() because
the function run in very eary stage and uart has not been initialized at
that time, so remove this debug level definition;
- Rewrite parse_hv_cmdline() function to make it compliant with MISRA-C;
- Decouple uart16550 stuff from Init.c module and let console.c handle it;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
rename the macro since MAX_PCPU_NUM could be parsed from board file and
it is not a configurable item anymore.
Tracked-On: #4230
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The default PCI mmcfg base is stored in ACPI MCFG table, when
CONFIG_ACPI_PARSE_ENABLED is set, acpi_fixup() function will
parse and fix up the platform mmcfg base in ACRN boot stage;
when it is not set, platform mmcfg base will be initialized to
DEFAULT_PCI_MMCFG_BASE which generated by acrn-config tool;
Please note we will not support platform which has multiple PCI
segment groups.
Tracked-On: #4157
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Statically define the per vm RSDP/XSDT/MADT ACPI template tables in vacpi.c,
RSDP/XSDT tables are copied to guest physical memory after checksum is
calculated. For MADT table, first fix up process id/lapic id in its lapic
subtable, then the MADT table's checksum is calculated before it is copies to
guest physical memory.
Add 8-bit checksum function in util.h
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Minor cosmetic fixes in acpi.h:
Move and group similar defines together
Rename RSDP_CHECKSUM_LENGTH to ACPI_RSDP_CHECKSUM_LENGTH
Add post fix 'U' to define as unsinged int and change code accordingly
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
All tables and structs must be byte packed to match ACPI
specification, also use __packed in place of __attribute__((packed))
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Currently ACPI related defines/structs are scattered across multiple C
source files, move them into acpi.h so that they can be shared and used by
vacpi code (to be added in subsequent commits).
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Currently when get_rsdp is called, the EFI depriv_boot env is not initialized.
In such case it will fallback to the legacy mechanism of ACPI table.
If the ACPI table based on legacy mechanism is not found, it will fail to get
the ACPI table and then the system will hang.
On the old platform it still can parse the ACPI table from legacy mechanism.
In fact when EFI RSDP exists, the EFI RSDP is preferred instead of legacy ACPI
RSDP.
In order to avoid multiple calling of depriv_init_boot, the init_boot_operations
is renamed and called after X2apic is enabled(early_init_lapic).
Tracked-On: #3184
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
now only SOS need decide boot with de-privilege or direct boot mode, while
for other pre-launched VMs, they should use direct boot mode.
this patch merge boot/guest/direct_boot_info.c &
boot/guest/deprivilege_boot_info.c into boot/guest/vboot_info.c,
and change init_direct_vboot_info() function name to init_general_vm_boot_info().
in init_vm_boot_info(), depend on get_sos_boot_mode(), SOS may choose to init
vm boot info by setting the vm_sw_loader to deprivilege specific one; for SOS
using DIRECT_BOOT_MODE and all other VMS, they will use general_sw_loader as
vm_sw_loader and go through init_general_vm_boot_info() for virtual boot vm
info filling.
this patch also move spurious handler initilization for de-privilege mode from
boot/guest/deprivilege_boot.c to boot/guest/vboot_info.c, and just set it in
deprivilege sw_loader before irq enabling.
Changes to be committed:
modified: Makefile
modified: arch/x86/guest/vm.c
modified: boot/guest/deprivilege_boot.c
deleted: boot/guest/deprivilege_boot_info.c
modified: boot/guest/direct_boot.c
renamed: boot/guest/direct_boot_info.c -> boot/guest/vboot_info.c
modified: boot/guest/vboot_wrapper.c
modified: boot/include/guest/deprivilege_boot.h
modified: boot/include/guest/direct_boot.h
modified: boot/include/guest/vboot.h
new file: boot/include/guest/vboot_info.h
modified: common/vm_load.c
modified: include/arch/x86/guest/vm.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously we use Kconfig of DMAR_PARSE_ENABLED to choose pre-defined DMAR info
or parse it at runtime, at the same time we use MACRO of CONFIG_CONSTANT_ACPI
to decide whether parse PM related ACPI info at runtime. This looks redundant
so use a unified ACPI_PARSE_ENABLED Kconfig to replace them.
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Keep acpi.h as the only acpi api interface;
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
clean up a few MISRA C violations that can be fixed by code change in vboot files
Tracked-On: #861
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
struct vboot_candidates is private, so move it into source file, and change it
to a more suitable name vboot_bootloader_map.
this patch also add sos_boot_mode to indicate if the sos boot is using de-privilege
or direct boot mode.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
The interface struct & API changes like below:
struct uefi_context->struct depri_boot_context
init_firmware_operations()->init_vboot_operations()
init_firmware()->init_vboot()
firmware_init_irq()->init_vboot_irq()
firmware_get_rsdp()->get_rsdp_ptr()
firmware_get_ap_trampoline()->get_ap_trampoline_buf()
firmware_init_vm_boot_info()->init_vm_boot_info()
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
currently, ACRN hypervisor can either boot from sbl/abl or uefi, that's
why we have different firmware method under bsp & boot dirs.
but the fact is that we actually have two different operations based on
different guest boot mode:
1. de-privilege-boot: ACRN hypervisor will boot VM0 in the same context as
native(before entering hypervisor) - it means hypervisor will co-work with
ACRN UEFI bootloader, restore the context env and de-privilege this env
to VM0 guest.
2. direct-boot: ACRN hypervisor will directly boot different pre-launched
VM(including SOS), it will setup guest env by pre-defined configuration,
and prepare guest kernel image, ramdisk which fetch from multiboot modules.
this patch is trying to:
- rename files related with firmware, change them to guest vboot related
- restruct all guest boot stuff in boot & bsp dirs into a new boot/guest dir
- use de-privilege & direct boot to distinguish two different boot operations
this patch is pure file movement, the rename of functions based on old assumption will
be in the following patch.
Changes to be committed:
modified: ../efi-stub/Makefile
modified: ../efi-stub/boot.c
modified: Makefile
modified: arch/x86/cpu.c
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: arch/x86/irq.c
modified: arch/x86/trampoline.c
modified: boot/acpi.c
renamed: bsp/cmdline.c -> boot/cmdline.c
renamed: bsp/firmware_uefi.c -> boot/guest/deprivilege_boot.c
renamed: boot/uefi/uefi_boot.c -> boot/guest/deprivilege_boot_info.c
renamed: bsp/firmware_sbl.c -> boot/guest/direct_boot.c
renamed: boot/sbl/multiboot.c -> boot/guest/direct_boot_info.c
renamed: bsp/firmware_wrapper.c -> boot/guest/vboot_wrapper.c
modified: boot/include/acpi.h
renamed: bsp/include/firmware_uefi.h -> boot/include/guest/deprivilege_boot.h
renamed: bsp/include/firmware_sbl.h -> boot/include/guest/direct_boot.h
renamed: bsp/include/firmware.h -> boot/include/guest/vboot.h
modified: include/arch/x86/multiboot.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The MACRO of CONFIG_CONSTANT_ACPI will be defined per scenario usage,
so move it from Kconfig to vm_configurations.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously ACPI PM1A register info was hardcoded to 0 in HV for generic boards,
but SOS still can know the real PM1A info so the system would hang if user
trigger S3 in SOS. Enabling PM1A register info fixup will let HV be able to
intercept the operation on PM1A and then make basic function of S3 work for
all boards;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IOAPIC info, specifically ID, is needed to map the IOAPIC to
corresponding DMAR. DMAR table in ACPI has a field that has IOAPIC
ID, that matches the info provided in MADT. Both (IOAPIC info from
MADT and from DMAR) is needed for remapping IOAPIC interrupts.
Tracked-On: #2426
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- add header file ld_sym.h in include/arch/x86/boot/
-- move 'ld_bss_start/end' from cpu.h to ld_sym.h,
avoid reverse dependency
-- move 'ld_text_end' from mmu.h to ld_sym.h
-- move 'ld_trampoline_load/start/end' to ld_sym.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Boot component prepares the very basic platform boot env. It finally call
into platform initilization entries:
- bsp_boot_init & cpu_secondary_init for start up
- or restore_s3_context for wakeup
this patch move functions for AP trampoline into trampoline.c from reloc.c
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
--Removed MAX_PCPU_NUM in cpu.h
--Changed the default value from 128 to 8 for
MAX_PCPU_NUM
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix violations for function whose parameter can be read-only.
Tracked-On: #861
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
All the platforms supported by ACRN supports x2APIC. So enabled
x2APIC for ACRN hv. Removed any code that is needed for xAPIC mode
of operation.
Tracked-On: #1455
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed by: Yonghua Huang <yonghua.huang@intel.com>
There are chances that names with leading underscore declared by
developers are conflict with the ones reserved for the compiler.
What this patch does:
- rename these functions/variables/macros starting with
underscore to avoid such unintentational mistakes.
- remove gpr.h without any contents
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISRAC requires that the array size should be declared explicitly.
This patch fixes the issues caused by the arrays that are defined in
link_ram.ld.in or assembly file.
v1 -> v2:
* Update the solution based on the info from the following link.
https://sourceware.org/binutils/docs/ld/Source-Code-Reference.html
Fix pattern is like below:
extern char start_of_ROM, end_of_ROM, start_of_FLASH;
memcpy (& start_of_FLASH, & start_of_ROM, & end_of_ROM - &
start_of_ROM);
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Fix the parameter type mismatch between API declaration and definition.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
