Guest may write a MSI-X capability register with only RW bits setting on. This works
well on native since the hardware will make sure RO register bits could not over-write.
However, the software needs more efforts to achieve this. This patch does this by
defining a RW permission mapping base on bits. When a guest tries to write a MSI-X
Capability register, only modify the RW bits on vCFG space.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Guest may write a MSI capability register with only RW bits setting on. This works
well on native since the hardware will make sure RO register bits could not over-write.
However, the software needs more efforts to achieve this. This patch does this by
defining a RW permission mapping base on bits. When a guest tries to write a MSI
Capability register, only modify the RW bits on vCFG space.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
To remove the limit of 4MB ramdisk size simply adjust layout
dynamically according to ramdisk size rounded up to a 4K boundary.
This enables ramdisk based virtual machines which tend to have
large ramdisk memory requirements (128MB and above).
Tracked-On: #4840
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
As per the BWG a delay should be provided between the
INIT IPI and Startup IPI. Without the delay observe hangs
on certain platforms during MP Init sequence. So Setting
a delay of 10us between assert INIT IPI and Startup IPI.
Also, as per SDM section 10.7 the the de-assert INIT IPI is
only used for Pentium and P6 processors. This is not applicable
for Pentium4 and Xeon processors so removing this sequence.
Tracked-On: #4835
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
in shutdown_vm, it uses guest flags when handling the phyiscal
CPUs whose LAPIC is pass-through. So if it is cleared first,
the related vCPUs and pCPUs can not be switched to correct state.
so move the clear action after the flags used.
Tracked-On: #4848
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
1. context_entry couldn't be NULL in iommu_attach_device since bus
number is checked before the call.
2. root_entry couldn't be NULL in iommu_detach_device since bus number
is checked before the call.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a function dmar_unit_valid to check if the input dmar uint is valid
or not.
A valid dmar_unit should not be NULL, or ignore flag should not be set.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Snoop control will not be turned on by hypervisor, delete snoop control
related code.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize root_table_addr/ir_table_addr of dmar uint when register the dmar uint.
So no need to check if they are initialzed or not later.
Tracked-On: #4831
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Since zlib is not used, remove linking to it. This reduces build
dependencies.
Tracked-On: #4838
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@opensource.tttech-industrial.com>
1. though "pci_device_lock" & "logmsg_ctl.lock" are set to 0 when
system dose memory initialization, it is better to explicitly init
them before using.
2. unify the usage of spinlock_init
Tracked-On: #4827
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Currently the class type of igd_lpc bridge PCI device is not initialized.
In such case the guest driver doesn't detect the platform correctly when it
is in GVT-d mode. Then the linux i915 driver can't work.
Tracked-On: #4745
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Currently the DM will return the passthrough device to SOS when the DM
needs to be terminated. But the device is not reset. In such case it
will cause the garbage display issue when the GPU passthrough device
is returned.
Tracked-On: #4719
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Using ``.. rst-class:: rst-columns`` wasn't processed correctly because
of an error in the acrn-custom.css file. Fix that, update the
documentation guidelines, and make use of the multi-column display in
documents where the toctree created a long list. Now it will
appear in columns.
Also tweaked the toctree listing to use bold for the first-level items
(making a multi-column display look better, particularly when it has
subsections).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the OpenStack/libvirt tutorial with detailed instructions with
screen shots. Add patch file mention in the instructions to the docs
area so it's accessible.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch adds xml file, both board as well scenario files
that are need to run ACRN on top of QEMU as a nested hypervisor.
Currently support is only for SDC scenario.
Tracked-On: #3198
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
This patch sets defaults similar to generic platform configuration
when leaf features like PM_INFO, S3_INFO, S5_INFO, DRHD_INFO, CPU_BRAND,
CX_INFO, PX_INFO, MMCFG_BASE_INFO are not generated via either target
offline tool or user supplies empty field in case of emulation.
Tracked-On: #3198
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The mask valuei 0x3F was added to prevent out of range in array access.
However, it should not be hardcoded.
Since in ptirq_alloc_entry_id, the valid allocated id is no greater
than CONFIG_MAX_PT_IRQ_ENTRIES, it will not cause out of range array
access without mask.
So this patch removes the mask.
Also, use bitmap_clear_lock instead of bitmap_clear_nolock becuase there
could be the chance that more than 1 core to access a same 64bit var.
Tracked-On: #4828
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Invalidate cache by scanning and flushing the whole guest memory is
inefficient which might cause long execution time for WBINVD emulation.
A long execution in hypervisor might cause a vCPU stuck phenomenon what
impact Windows Guest booting.
This patch introduce a workaround method that pausing all other vCPUs in
the same VM when do wbinvd emulation.
Tracked-On: #4703
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1. not need 'clean' when building ACRN-HV/DM each time
2. correct efi-stub wrong dependency
Tracked-On: #2412
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
1. improve makefile to avoid duplicated build libs when make
in acrn-hypervisor/hypervisor directory to build HV only.
2. for debug/release library just select one makefile to build
Tracked-On: #2412
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Previous tutorial "Enable GPU Passthrough on the Skylake NUC"
is out of date, so delete it here.
v2 -> v1:
add attached file
Signed-off-by: Junming Liu <junming.liu@intel.com>
Refine find_ptirq_entry by hashing instead of walk each of the PTIRQ entries one by one.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
This patch adds hash function to hash 64bit value.
Tracked-On: #4550
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Remove pre-launched VM console setting in scenario xml and leave it
configured in bootargs directly.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The bootarg of rootfs for pre-launched VM is for Linux only and it
should not limited to physical block device which is selectable from
native rootfs list, it might be a USB or RAM device that "X" is variable
in root=/dev/sdX or /dev/ramX. So remove the rootfs setting in XML and
leave it configured in kernel bootargs directly.
Given the SOS must be Linux and its rootfs must be a physical block
device, rootfs item tag is still reserved in xml for SOS VM section.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
remove configurable="0" for hybrid scenario pci_devs of Pre Launched VM.
Tracked-On: #4808
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
With current acrn-config code, there would be no pci_dev.c generated
if no PCI devices were selected. This would cause a bug for logical_partition
scenario because of an old pci_dev.c is already in the folder and involved
for compiling. The configure tool should override the pci_dev.c, in this case,
to avoid building error.
Tracked-On: #4813
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
As VUART is not supported PCI VUART, use native PCI ttySn's IRQ for
VUART1 would cause communication failed, allocate a free IRQ for it.
Tracked-On: #4798
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Use post_vm_id$(relative id) to identify each post-launched VM to
make sure simultaneous launching successfully.
Tracked-On: #4797
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add board xml and default scenario config xmls and launch config
xmls for ElkhartLake boards.
Tracked-On: #4798
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Acked-by: Terry Zou <terry.zou@intel.com>
Assign the right acrn-dm arguments for "Soft RT/Hard RT" VMs by
'uos_type' in webUI item tag.
Tracked-On: #4799
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Remove "idle=halt" from SOS boot args since the param could be handled
automatically by acrn-config according to CPU scheduler setting.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
RTVM (with lapic PT) boots hang when maxcpus is
assigned a value less than the CPU number configured
in hypervisor.
In this case, vlapic_state(per VM) is left in TRANSITION
state after BSP boot, which blocks interupts to be injected
to this UOS.
Tracked-On: #4803
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Li, Fei <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add logs for vm state transition to help
analyze some problems.
Tracked-On: #4098
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Tools: cleanup acrn_mngr pause/continue message
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. Remove them from README.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. should be removed. Remove them from acrn_mngr.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. should be removed.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
The 'pause/continue' acrnctl cmd is never used and their action are not
defined for ACRN VMs. Devicemodel minitor doesn't need to handle these 2
msg, should be removed.
Tracked-On: #4790
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
There's no need to look up MSI ptirq entry by virtual SID any more since the MSI
ptirq entry would be removed before the device is assigned to a VM.
Now the logic of MSI interrupt remap could simplify as:
1. Add the MSI interrupt remap first;
2. If step is already done, just do the remap part.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
Reviewed-by: Grandhi, Sainath <sainath.grandhi@intel.com>
In commit 0a7770cb, we remove vm pointer in vpci structrue. So there's no need
for such pre-condition since vpci is embedded in vm structure. The vm can't be
NULL Once the vpci is not NULL.
Tracked-On: #4550
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong<eddie.dong@Intel.com>
