We are trying to add both industry and sdc images to CL build. To
maintain the build interface unchanged (no change from CL side), we
extend the build command to generate the different target images.
To identity different images, we use rule:
$(HV_FILE).$(BOARD).$(FIRMWARE).$(SCENARIO)
as target image file name.
Tracked-On: #3593
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Now that ACPI is enabled for pre-launched VMs, we can remove all mptable code.
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Statically define the per vm RSDP/XSDT/MADT ACPI template tables in vacpi.c,
RSDP/XSDT tables are copied to guest physical memory after checksum is
calculated. For MADT table, first fix up process id/lapic id in its lapic
subtable, then the MADT table's checksum is calculated before it is copies to
guest physical memory.
Add 8-bit checksum function in util.h
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Hardcode "RELEASE=0" will cause the value of "CONFIG_RELEASE"
to be 'n' in kconfig.mk, it will be overwritten "CONFIG_RELEASE"
with Kconfig setting.
Tracked-On: #3565
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add emulated PCI device configure for SOS to prepare for add support for customizing
special pci operations for each emulated PCI device.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
now the dependency is like this in Makefile:
acrn.bin << xxxx.a << xxxx.obj
if excute 'make' in hypervsior fold for the first time,
it can generate acrn.bin, if excute 'make' for second
time, it can not do the final link because there are
the same timestamp for acrn.bin and xxxx.a generated by
previous build, add PHONY to fix this issue.
Tracked-On: #3542
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Align SOS pci device configure with pre-launched VM and filter pre-launched VM's
PCI PT device from SOS pci device configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add to include acrn.32.out during cl rpm
generation as acrn.(board).32.out
This is required for Hybrid mode bringup in multios
Tracked-On:#3487
Signed-off-by: Nikhil Rane <nikhil.rane@intel.com>
This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build
Tracked-On: #3482
Signed-off-by: Terry Zou <terry.zou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per community requirement;up to three post-launched VM might be
needed for some automotive SDC system, so add SDC2 scenario to
satisfy this requirement.
Tracked-On: #3429
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
In release environment, binary files must be stripped in
order to remove debugging code sections and symbol information
that aid attackers in the process of disassembly and reverse
engineering.
Use '-s' linking option to remove symbol table and relocation
information from release binaries.
Tracked-On: #3427
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Since 9c81f4c32c ("hv:build library to lib_mod.a"), the parallel build
system was broken. You cannot use "make -j #" to build ACRN.
To fix this we need to declare explicit rules for the files to be built.
Also remove "$(LIB_FLAGS): lib " and " MOD_DEPS " since they are
redundancy after this change.
This closes#3351
Tracked-On: projectacrn#3351
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
there is a build error if we only build debug/release library
because missing the build/modules folder
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
modified: Makefile
modified: debug/Makefile
modified: release/Makefile
support compiling system initialization code
to sys_init_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
support compiling virtual platform hypercall to vp_hcall_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling virtual platform trusty to vp_trusty_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling virtual platform device model layer
to vp_dm_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling virtual platform base layer to
vp_base_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling hw management code to hw_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling boot code to boot_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
HV has been divided into the following layers
according to Jason's modularization documentation
high: 70 -- system initialization
60 -- virtual platform hypercall
50 -- virtual platform trusty
40 -- virtual platform device model
30 -- virtual platform base
20 -- hardware management
10 -- platform boot
low: 00 -- library
this patch is only for library layer,
support compiling library layer to lib_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
Hybrid scenario will run 3 VMs: one pre-launched VM, one pre-launched SOS VM
and one post-launched Standard VM.
Tracked-On: #3214
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Get the platform EPC resource and partiton the EPC resource for VMs
according to VM configurations.
Don't support sgx capability in SOS VM.
init_sgx is called during platform bsp initialization.
If init_sgx() fails, consider it as configuration error, panic the system.
init_sgx() fails if one of the following happens when at least one VM requests
EPC resource if no enough EPC resource for all VMs.
No further check if sgx is not supported by platform or not opted-in in BIOS,
just disable SGX support for VMs.
Tracked-On: #3179
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now only SOS need decide boot with de-privilege or direct boot mode, while
for other pre-launched VMs, they should use direct boot mode.
this patch merge boot/guest/direct_boot_info.c &
boot/guest/deprivilege_boot_info.c into boot/guest/vboot_info.c,
and change init_direct_vboot_info() function name to init_general_vm_boot_info().
in init_vm_boot_info(), depend on get_sos_boot_mode(), SOS may choose to init
vm boot info by setting the vm_sw_loader to deprivilege specific one; for SOS
using DIRECT_BOOT_MODE and all other VMS, they will use general_sw_loader as
vm_sw_loader and go through init_general_vm_boot_info() for virtual boot vm
info filling.
this patch also move spurious handler initilization for de-privilege mode from
boot/guest/deprivilege_boot.c to boot/guest/vboot_info.c, and just set it in
deprivilege sw_loader before irq enabling.
Changes to be committed:
modified: Makefile
modified: arch/x86/guest/vm.c
modified: boot/guest/deprivilege_boot.c
deleted: boot/guest/deprivilege_boot_info.c
modified: boot/guest/direct_boot.c
renamed: boot/guest/direct_boot_info.c -> boot/guest/vboot_info.c
modified: boot/guest/vboot_wrapper.c
modified: boot/include/guest/deprivilege_boot.h
modified: boot/include/guest/direct_boot.h
modified: boot/include/guest/vboot.h
new file: boot/include/guest/vboot_info.h
modified: common/vm_load.c
modified: include/arch/x86/guest/vm.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
For pre-launched VMs and SOS, VM shutdown should not be executed in the
current VM context.
- implement NEED_SHUTDOWN_VM request so that the BSP of the target VM can shut
down the guest in idle thread.
- implement shutdown_vm_from_idle() to shut down target VM.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously we use Kconfig of DMAR_PARSE_ENABLED to choose pre-defined DMAR info
or parse it at runtime, at the same time we use MACRO of CONFIG_CONSTANT_ACPI
to decide whether parse PM related ACPI info at runtime. This looks redundant
so use a unified ACPI_PARSE_ENABLED Kconfig to replace them.
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Split acpi.c to acpi_base.c and acpi_ext.c. The former one will
go FuSa and the later one will not;
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The acpi parse code would not go FuSa cert, move acpi parser related code
to a separate folder is helpful on FuSa isolation.
This patch moves dmar parse code;
Tracked-On: #3107
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
now there are 2 static_checks.c,
./arch/x86/static_checks.c
./common/static_checks.c
they are used for static checks when build time,
this check should not belong to any HV layer from
modularization view, then add and move it to pre_build folder.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
modified: Makefile
deleted: common/static_checks.c
renamed: arch/x86/static_checks.c -> pre_build/static_checks.c
This patch removes the dynamic memory allocation in dmar_parse.c.
v1 -> v2:
- rename 'const_dmar.c' to 'dmar_info.c' and move it to
'boot' directory
- add CONFIG_DMAR_PARSE_ENABLED check for function declaration
Tracked-On: #861
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
currently, ACRN hypervisor can either boot from sbl/abl or uefi, that's
why we have different firmware method under bsp & boot dirs.
but the fact is that we actually have two different operations based on
different guest boot mode:
1. de-privilege-boot: ACRN hypervisor will boot VM0 in the same context as
native(before entering hypervisor) - it means hypervisor will co-work with
ACRN UEFI bootloader, restore the context env and de-privilege this env
to VM0 guest.
2. direct-boot: ACRN hypervisor will directly boot different pre-launched
VM(including SOS), it will setup guest env by pre-defined configuration,
and prepare guest kernel image, ramdisk which fetch from multiboot modules.
this patch is trying to:
- rename files related with firmware, change them to guest vboot related
- restruct all guest boot stuff in boot & bsp dirs into a new boot/guest dir
- use de-privilege & direct boot to distinguish two different boot operations
this patch is pure file movement, the rename of functions based on old assumption will
be in the following patch.
Changes to be committed:
modified: ../efi-stub/Makefile
modified: ../efi-stub/boot.c
modified: Makefile
modified: arch/x86/cpu.c
modified: arch/x86/guest/vm.c
modified: arch/x86/init.c
modified: arch/x86/irq.c
modified: arch/x86/trampoline.c
modified: boot/acpi.c
renamed: bsp/cmdline.c -> boot/cmdline.c
renamed: bsp/firmware_uefi.c -> boot/guest/deprivilege_boot.c
renamed: boot/uefi/uefi_boot.c -> boot/guest/deprivilege_boot_info.c
renamed: bsp/firmware_sbl.c -> boot/guest/direct_boot.c
renamed: boot/sbl/multiboot.c -> boot/guest/direct_boot_info.c
renamed: bsp/firmware_wrapper.c -> boot/guest/vboot_wrapper.c
modified: boot/include/acpi.h
renamed: bsp/include/firmware_uefi.h -> boot/include/guest/deprivilege_boot.h
renamed: bsp/include/firmware_sbl.h -> boot/include/guest/direct_boot.h
renamed: bsp/include/firmware.h -> boot/include/guest/vboot.h
modified: include/arch/x86/multiboot.h
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This scenario is typical for industry usage with 3 VMs: 1 pre-launched SOS VM,
1 post-launched user VM for HMI and 1 post-launched RT VM for real-time control.
Tracked-On: #3039
Signed-off-by: Yan, Like <like.yan@intel.com>
As there is a requirement for conmunication between VMs on uart port,
but for Pre-launched VM, the only way is to create vuart for each VM and
connect them at hypervisor side. So, the vuart code should be moved from
/debug to /dm so that they can also be used in release version.
For the console related code, as no need to support in release version,
so leave them at debug directory.
Tracked-On: #2987
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN builds mptable for pre-launched VMs. It uses CONFIG_PARTITION_MODE
to compile mptable source code and related support. This patch removes
the macro and checks if the type of VM is pre-launched to build mptable.
Tracked-On: #2941
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
renamed: include/dm/pci.h -> include/hw/pci.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Previously we use unified vm_config.c for all scenarios and use MACROs
for each configuration items, then the initialization of vm_configs[]
becomes more complicated when definition of MACROs increase, so change
the coding style that all configurable items could be explicitly shown in
vm_configuration.c to make code more readable.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In this scenario, hypervisor will run two logical partition VMs.
Please note that the Kconfig of Hypervisor mode will be removed
gradually. In current Kconfig setting, the CONFIG_PARTITION_MODE
is still kept for now for back-compatibility.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Previously the vm_configs[] is defined separately for sharing mode and
partition mode, but the concept of hypervisor mode will be removed. Instead
we will introduce scenario Kconfig for hypervisor to load different vm
configurations.
SDC(Software Defined Cockpit) is a typical scenario that ACRN supported
so we introduce this scenario for previously sharing mode and move its
configurations to scenarios/sdc folder. The configuration could be used
for all boards reference.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Delete the 2 files and merge their code into vpci.c:
hypervisor/dm/vpci/partition_mode.c
hypervisor/dm/vpci/sharing_mode.c
And change the Makefile accordingly
Change PCI_PRIV_H_ to VPCI_PRIV_H_ in vpci_priv.h
Some misra c fix:
Add @pre for functions
Add const to function parameters
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Instead of using CONFIG_PARTITION_MODE at compile time to compile in and call
the partition mode/sharing mode specific functions, always compile in all sharing
mode and partition code, then calling the corresponding functions dynamically based
on vm type (PRE_LAUNCHED_VM and SOS_VM) at runtime.
Some misra c fix:
Add @pre for functions
Add const to function parameters
Add ASSERT in pci_cfgdata_io_read and pci_cfgdata_io_write
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- move this api from misc.c to timer.c to avoid
reverse dependency, and remove misc.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Preparing for hybrid mode:
- create vE820 for pre-launched VMs and do other init code when the
vm_config->type is PRE_LAUNCHED_VM.
- create ve820.c for each board because without wrapping by
CONFIG_PARTITION_MODE, ve820_entry[] needs to be visible even when
compiling target boards that haven't enabled pre-launched VMs.
- remove create_prelaunched_vm_e820() from vm.c and implement board
specific function for each $(CONFIG_BOARD)/ve820.c. The reasons being:
- don't need to define ve820_entry[32] for those boards that don't
support pre-launched VMs.
- more importantly, this makes it much easier to create different per-VM
vE820 when it's needed.
Tracked-On: #2291
Signed-off-by: Zide Chen <zide.chen@intel.com>
Previously vrtc is for partition mode only, now enable it for sharing mode;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN now has unified the way to handle SBL and UEFI.
so just remove corresponding macros in Kconfig.
BTW, default configuration in Kconfig is for UEFI boards.
Tracked-On: #2708
Signed-off-by: Tw <wei.tan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
