This update is to reflect the changes for acrnbridge to start
with systemd-networkd instead of running a script.
Signed-off-by: Tan Shen Joon <shen.joon.tan@intel.com>
The pm S state data is from host ACPI info and needed for S3/S5
implementation.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
On some occations HV operates relying on host acpi info, we can use a
c file to store this data. The data could be hardcoded or use offline
tool that run on target first and then generate the file automatically.
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There is a mismatch in the 'telemetrics-clients' reference which
causes a warning (and a dead link).
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This patch adds the documents for acrn-crashlog:
README.rst: General introduction for acrn-crashlog.
acrnprobe/README.rst: Introduction for acrnprobe in detail.
usercrash/README.rst: Introduction for usercrash in detail.
Signed-off-by: xiaojin2 <xiaojing.liu@intel.com>
Signed-off-by: Liu Xinwu <xinwu.liu@intel.com>
Signed-off-by: CHEN Gang <gang.c.chen@intel.com>
Acked-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
pincpu and vmexit_pause both aligned to lower p, it is a bug, vmexit_pause should align with P(upper).
Missing enable_bvmcons usage so add -b in help prints.
remove redundant tab blank to keep same indentation.
Signed-off-by: Chris Ye <chris.ye@intel.com>
Currently irq and vector numbers are used inconsistently.
* Sometimes vector or irq ids is used in bit operations, indicating
that they should be unsigned (which is required by MISRA C).
* At the same time we use -1 to indicate an unknown irq (in
common_register_handler()) or unavailable irq (in
alloc_irq()). Also (irq < 0) or (vector < 0) are used for error
checking. These indicate that irq or vector ids should be signed.
This patch converts irq and vector numbers to unsigned 32-bit integers, and
replace the previous -1 with IRQ_INVALID or VECTOR_INVALID. The branch
conditions are updated accordingly.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Trying out the graphviz capability rather than using static images that
we can't easily modify. Also updated the site logo that was too wide.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
There is a mistake on description for mngr_send_msg() in acrn_mngr.h
We mistake the ack_len to req_len
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
update to systemd config files so that the bridge will be up
when systemd-networkd is started.
Signed-off-by: Tan Shen Joon <shen.joon.tan@intel.com>
Reviewed-by: Jack Ren <jack.ren@intel.com>
- Also update all the references that need the absolute HPA with the
actual load addresses
- Save the trampoline code address to trampline_start16_paddr
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
- For UEFI boot, allocate memory for trampoline code in ACRN EFI,
and pass the pointer to HV through efi_ctx
- Correct LOW_RAM_SIZE and LOW_RAM_START in Kconfig and bsp_cfg.h
- use trampline_start16_paddr instead of the hardcoded
CONFIG_LOW_RAM_START for initial guest GDT and page tables
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
in real mode part, add extra pointers for page tables and long jump buffer
so it's possible for HV code to patch the relocation offset
in long mode part, use absolute addressing when referring HV symbols,
and use relative addressing for symbols within trampoline code
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
emalloc_for_low_mem() is used if CONFIG_EFI_STUB is defined.
e820_alloc_low_memory() is used for other cases
In either case, the allocated memory will be marked with E820_TYPE_RESERVED
Signed-off-by: Zheng, Gen <gen.zheng@intel.com>
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
MTRR feature was added after commit bce7ed1715 ("HV: config:
add Kconfig and defconfigs"), so the generated config.h doesn't
include CONFIG_MTRR_ENABLED
Signed-off-by: Zide Chen <zide.chen@intel.com>
- vm_gva2gpa is same as gva2gpa, so replace it with gva2gpa directly.
- remove dead usage of vm_gva2gpa in emulate_movs.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
using copy_from_gva to refine function acrn_update_ucode
v2:
- inject #PF if copy_from_gva meet -EFAULT
- remove VCPU_RETAIN_RIP when inject #PF
- refine MACRO GET_DATA_SIZE
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
using copy_from_gva for shell function shell_vcpu_dumpreg &
shell_vcpu_dumpmem
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
using copy_from_gva to do dump_guest_stack & show_guest_call_trace
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
there is no need to use wrap function vm_restart_instruction, we
can use VCPU_RETAIN_RIP directly
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
use copy_from_gva in vie_init, if copy_from_gva meet -EFAULT, inject #PF.
And for decode_instruction, if return -EFAULT, the caller should keep return
path with successful status.
v2:
- remove vm_restart_instruction when inject #PF
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
there are data transfer between guest virtual space(GVA) & hv(HVA), for
example, guest rip fetching during instruction decoding.
GVA is address continuous, but its GPA could be only 4K page address
continuous, this patch adds copy_from_gva & copy_to_gva functions by
doing page walking of GVA to avoid address breaking during accessing GVA.
v2:
- modify API interface based on new gva2gpa function, err_code added
- combine similar code with inline function _copy_gpa
- change API name from vcopy_from/to_vm to copy_from/to_gva
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
V2->V3 modified the description
V1->V2 add __unused to handler_private_data
while misra c analyse callback function, it will dereference the pointer
plus an implicit getting address when extra parentheses with inner
star(example:(*foo)()). the first dereference should be removed.
Signed-off-by: Huihuang Shi <huihuang.shi@intel.com>
reviewed-by: Li,Fei1 <fei1.li@intel.com>
reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
if error code not valid, do not vmwrite VMX_ENTRY_EXCEPTION_EC. In cancel_event_injection, the
inject_info.error_core is not assigned when error code not valid.
Signed-off-by: Chris Ye <chris.ye@intel.com>
This patch drops "#include <bsp_cfg.h>" and include the generated config.h in
CFLAGS for the configuration data.
Also make sure that all configuration data have the 'CONFIG_' prefix.
v4 -> v5:
* No changes.
v3 -> v4:
* Add '-include config.h' to hypervisor/bsp/uefi/efi/Makefile.
* Update comments mentioning bsp_cfg.h.
v2 -> v3:
* Include config.h on the command line instead of in any header or source to
avoid including config.h multiple times.
* Add config.h as an additional dependency for source compilation.
v1 -> v2:
* No changes.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
This patch implements the following targets as an includable .mk to the make
system of the hypervisor.
make defconfig PLATFORM=xx:
force (re)generating the default configuration for xx
make oldconfig PLATFORM=xx:
generate a configuration for platform xx based on .config if available
make minimalconfig
save a minimized .config to defconfig
The default target (make all) will generate a default configuration if no
.config is available.
The values defined in .config are available in the toplevel Makefile after
kconfig/kconfig.mk is included.
v4 -> v5:
* Add minimalconfig for generating default configs.
v3 -> v4:
* No changes.
v2 -> v3:
* "make defconfig" now correctly overwrite an existing .config.
* Add short descriptions on where each target is supposed to be used.
v1 -> v2:
* Add proper dependency checks in the Makefile of hypervisor.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
This patch introduces the following functions for Makefiles:
check_dep_exec <exe>
Check existence of the executable <exe>
check_dep_pylib <lib>
Check existence of the python library <lib>
Calling and evaluting the functions will create a check_xxx target and add the
target to the variable BUILD_DEPS. Thus it is sufficient to add the following
to a Makefile for checking a number of build dependencies.
include deps.mk
$(eval $(call check_dep_exec,python))
$(eval $(call check_dep_pylib,Sphinx))
all: $(BUILD_DEPS) ...
v4 -> v5:
* No changes.
v3 -> v4:
* No changes.
v2 -> v3:
* No changes.
v1 -> v2:
* New in v2.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
This patch converts the configuration entries (previously defined in
bsp/*/include/bsp/bsp_cfg.h) to a Kconfig script.
With the platform specified, the default values will be exactly those in the
corresponding bsp_cfg.h.
v4 -> v5:
* No changes.
v3 -> v4:
* No changes.
v2 -> v3:
* No changes.
v1 -> v2:
* No changes.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
v4 -> v5:
* No changes.
v3 -> v4:
* No changes.
v2 -> v3:
* Update the guide before introducing the actual code.
v1 -> v2:
* Add guides on installing pip and kconfiglib.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
This patch introduces some scripts that takes a Kconfig script and generates
.config or config.h. These scripts are general and can be used by the
hypervisor, dm, tools, etc. as long as proper make targets are added.
Note: Kconfiglib by Ulf Magnusson is ISC licensed.
v4 -> v5:
* Add minimalconfig which creates a defconfig by minimizing a given .config.
v3 -> v4:
* silentoldconfig now properly generate a .config if an old one does not
exist.
v2 -> v3:
* Add license info and the permission notice of Kconfiglib.
* Mention the input Kconfig in the script descriptions.
v1 -> v2:
* Drop kconfiglib.py. The getting started guide will be updated accordingly
and dependency checks will be added to Makefile in the following patches.
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Zhao Yakui <yakui.zhao@intel.com>
This is one workaround patch to resolve read/write failed for /dev/cbc-lifecycle
and /dev/cbc-signals cdev nodes. It cause cbc_lifecycle service can't send
heartbeat to IOC firmware, also can't receive any signal data from IOC firmware.
This patch need to be revert once the IOC firmware or CBC driver fixed the root
cause.
The [-f] option means enable hardware flow control by set CRTSCTS attribute for
c_cflag of termios, without [-f] option will unset the attribute.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Vineetha G Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
Reviewed-by: Alex Du <alek.du@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are some inappropriate descrition related to mngr, like "vmm msg".
Replace all "vmm" with "mngr".
No functional change.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fix some potential crash issues, like wild
pointers access, buffer overflow and etc.
Change-Id: Iddd8e1820da426adc6b9b4d9da9e44017d9f365c
Signed-off-by: Xiaoguang Wu <xiaoguang.wu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, trampline code is used by both AP start and BSP s3 resume.
For s3 resume, ACPI (5.2.10 Firmware ACPI Control Structure (FACS).
table 5-37) defines the real mode address should be set to:
realmode address = CS(waking_vec >> 4): IP(wakeing_vec & 0x000F)
But not all bootloader (like ABL) follow ACPI definition about the
CS:IP setup before jump to trampline code for S3 resume.
To handle all these cases, a long jmp is issued at very beginning
of trampline code to fixup the CS:IP setup. After the fixup, the
CS is set to: (waking_vect >> 4), the IP is set to: (the_address_
of_next_instruction_of_long_jmp & 0xF). Which is aligned with ACPI
definition.
Another thing is that we can't calculate the fixup CS and IP value.
The reason is related with limitations of real mode (can't get
current ip address without stack). So we calculate the CS and IP
when preparing the trampline code.
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
Cleanup "cpu_secondary_xx" in the symbols/section/functions/variables
name in trampline code.
There is item left: the default C entry is Ap start c entry. Before
ACRN enter S3, the c entry will be updated to high level S3 C entry.
So s3 resume will go s3 resume path instead of AP startup path.
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Zheng Gen <gen.zheng@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
We will reuse this part of code for:
- AP bootup
- BSP wakeup from S3
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <Eddie.dong@intel.com>
- unmask MTRR from guest CPUID to enable MTRR
- MTRR virtualization can be disabled by commenting out CONFIG_MTRR_ENABLED
Signed-off-by: bliu11 <baohong.liu@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-rdmsr: emulate all MTRR registers besides variable range MTRRs
-wrmsr: emulate all MTRR registers besides variable range MTRRs and MTRRCAP
Signed-off-by: bliu11 <baohong.liu@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MTRRs have no effect on the memory type used for an access to GPA.
This patch updates the EPT MT field according to the memory type
selected by MTRRs, which combines with the PAT, PCD and PWT bits
from the guest paging structures to determine the effective memory type
Signed-off-by: bliu11 <baohong.liu@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
