config
Add support to parse and get 'virtio-input' item value from launch config
files, these values are editable by user.
Tracked-On: #4163
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some vm need mediator of 'virtio-input', so add 'virtio-input' item
into the launch config files that user could edit them from webUI.
Tracked-On: #4163
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Some API calls have the same function in library config,
the patch refines the API calls.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Skip to generate DRHDn_IGNORE to board.c, when there is no device scope
type on target platform DRHD definition.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
There may be more than one PCI segment in target board, and DRHD info
should be parsed correctly base on secondary PCI bus. currently
board_parser.py tool did not handle such case.
Add this patch for walking secondary PCI Bus.
Tracked-On: #4143
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Refine the DmarDevScope struct and some class names.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Support to config kata vm in webUI, this need to modify 'configurable' attribute
to '1' in vm item.
Tracked-On: 4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add UI to add or remove Kata VM for sdc scenario, the added Kata VM
is based on the generic config xml.
Tracked-On: 4145
Signed-off-by: Shuang Zheng <shuang.zheng@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
1. The vcpus of UOS are configured in vm configuration, they should be offlined from
sos before vm start.
2. retry offline cpu for all UOS type.
3. uos image name will be based on vm name instead of input parameter.
4. correct the unexpected token ';;' in launch config.
Tracked-On: #4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For SDC scenario, support kata vm would be triggered from webUI, and
will store the kata vm information to the scenario config file.
Then, vcpu affinity/number should be refined for vm1 and kata vm.
Note: with this patch, user should add/remove the kata vm in SDC
scenario webUI and its number should match MAX_KATA_VM_NUM in
hypervisor/arch/x86/Kconfig.
Tracked-On: #4145
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Currently MMIO BAR size not support size above 4G,
print warning to user to set the MMIO size in 4G region from BIOS.
Target-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Minor changes on git commit message of config patch:
For board config patch, specify with "config patch for board xxx";
For scenario config patch, specify with "config patch for scenario yyy".
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add a Kconfig parameter called UEFI_OS_LOADER_NAME to hold the Service VM EFI
bootloader to be run by the ACRN hypervisor. A new string manipulation function
to convert from (char *) to (CHAR16 *) has been added to facilitate the
implementation.
The default value is set to systemd-boot (bootloaderx64.efi)
Tracked-On: #2793
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
There may be no physical serial port in the target board, and it will
stop generating board file, the patch add support to handle such case.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
If S3/S5 are not support by BIOS in some platform, will set them to 0
as default.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Return correct key of vuart base to webUI for parsing.
Tracked-On: #4128
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The *.mk files under misc/acrn-config/library are all rules for hypervisor
makefiles only, so move these files to hypervisor/scripts/makefile/ folder.
The folder of acrn-config/library/ will be used to store python script lib only.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Terry Zou <terry.zou@intel.com>
Current board parse logic would be broken if acpi_idle/acpi-cpufreq
driver is not loaded by native kernel.
This patch would just leave a warning to user and continue to parse
other information in this case.
Tracked-On: #4082
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous code parse the Cx value by hardcoded position in sysfs desc
node, but this might be changed in different kernel.
This patch will parse the Cx value position by index key word like
MWAIT/IOPORT.
Tracked-On: #4074
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
If pttyS1 do not exist, we can alloc irq for vuart1, but if pttyS1
exist, we should reuse the irq of pttyS1 to keep compliance.
Tracked-On: #4073
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Move hypervisor related include path from CFLAGS to INCLUDE_PATH to make
structure more clean.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
We now have four methods to configure board and scenario when
build acrn (sorted with priority):
1. Change them with "make menuconfig" in hypervisor directory
2. Give baord_file/scenario_file as make command parameters
3. Give BOARD/SCENARIO as make command parameters
4. Use BOARD/SCENARIO default value defined in Makefile file
With this patch, we make sure we follow priority exactly.
Tracked-On: #4067
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
Currently make hypervisor will depend on a $(BOARD).config file to load
board defconfig which triggered by oldconfig process, this will block
make from XMLs for a new board because $(BOARD).config never exist.
This requires us to patch configuration for new board earlier than make
oldconfig.
Tracked-On: #4067
Signed-off-by: Victor Sun <victor.sun@intel.com>
without the msr.h file the build will be failed when CAT is enabled.
Tracked-On: #4066
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
For vuart1, if it's mapped to a real native serial port, we must
re-use the native serial port io base and irq number. If no native
serial port is mapped to vuart1, non-exist io base and irq should
be used.
Please note: UOS launch script may need be updated according to
which serial port index is used by vuart1.
Now, we are using ttyS1 of SOS for vuart1 in our release. User may
need to remap vuart to different ttySx by following above rule if
ttyS1 in user platform is used by other devices like Bluetooth/Wifi.
Tracked-On: #4016
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-On: Victor Sun <victor.sun@intel.com>
Enable xhci usb mediator for whl-ipc-i5/whl-ipc-7 and KBL NUC for LaaG
and WaaG.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Enhance the $(board).config for new board.
Serial config should be set in $(board).config for new board.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
mem_size should be set from xml, it should not be overrided dynamically.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
interrupt_storm should be enabled while passthrough device was set.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add support to generate launch script for whl-ipc-i5/whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. run_cotainer is linux type uos, remove related runC script from
unnercessary luanch script.
Tracked-On: #3930
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i7.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Add board/scenario/launch config files for whl-ipc-i5.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
keep_gsi is needed as a workaround for the device that support both
MSI and legacy interrupt, so keep the flag for Android only because
it is not sure for some wifi/audio device on other Linux guest.
Tracked-On: #3956
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Parse DRHD_INFO section from board config xml, and generate dmar
structure information to board.c
2. Copy macro of DRHD_INFO from board config xml to $(board)_acpi_platform.h
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Since msr_index relys on the MSR_IA32_L2_QOS_MASKn(n:max to 3)
macro which defined in hv source code, generate array that CLOS number
more than 4 means need define more than 4 macro.
This patch solve such issue by using MSR_IA32_L2/L3_MASK_BASE with the
msr index offset.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The DRHD_INFO section should be updated with the refinement patches for
parsing DMAR table.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Initialize DRHDn_DEVSCOPEn_TYPE/DRHDn_DEVSCOPEn_ID for each devscope;
2. Remove DRHDn_IOAPIC_ID macro;
2. Refine the value format from base 10 to 16.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Previous DRHD and device scope number are hard coded to 4, this patch removes
the limitation and parse the real drhd count/devscope count dynamically.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The DRHDx_IGNORE should be defined to true when DRHD device BDF equal to
the given CONFIG_GPU_SBDF.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Now ACRN support more and more platforms. However, the default configuration only
support board which memory is less than 16 GB. If a board memory is large than
16 GB, the developer needs to configure the memory configuration according to his
board. Otherwise, the boot will fail. This's because UEFI BIOS will use the high
memory as possible.
This patch try to allocate the memory as eraly as possible. So that the BIOS will
not access this region.
Tracked-On: #4007
Signed-off-by: Li Fei1 <fei1.li@intel.com>
As vm3 for industry scenario was removed from scenario config, so
modify the uos id to proper id.
Tracked-On: #3854
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
We should use launch_$(uos type) for launch function name instead of using
launch_$(board name).
Tracked-On: #3931
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
add mem_size parameter for acrn-dm while generating launch script.
Traked-On: #3932
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Add the character of quotation marks for launch vm script.
2. Audio codec should put together with audio devcie and pass to
vm , otherwise report an error message to webUI.
Tracked-On: #3937
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
The VM2 of INDUSTRY scenario need 2 vCPUs for performance, so there would
be no available pCPU for VM3, need to remove VM3 for this scenario.
Tracked-On: #3925
Signed-off-by: Victor Sun <victor.sun@intel.com>
The previous method to handle ttyS info has an assumption that PCI
serial devices are all mmio type, this caused incorrect BDF info in
board XML file.
This patch fix this issue by dropping serial device BDF info and
replace it with IO type.
Tracked-On: #3900
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
Filter out the wifi/ethernet device from webUI with below PCI device class coding rule:
ethernet: 0200/0280;
wifi: 0280/0d20/0d21/0d80;
Tracked-On: #3917
Signed-off-by: Wei Liu <weix.w.liu@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
