removed some unnecessary variables and functions.
v1-->v2:
Replace div-by-zero with an inline ASM code
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
1)Fix to take into account the size of proc entries in MPtable.
2)Change APIC ids to virtual APIC IDs
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
V1:
In order to better comply with MISRA C,
add const qualifiers whereeven required.
In the patch, these are being added to pointers
which are normally used in "get" functions.
V2: Corrected the issues in the patch
pointed by Junjie in his review comments.
Moved the const qualifiers to the correct
places. Removed some changes which are not
needed.
V3: Updated patch comment.
This modifies a subset of all the functions
which might need constant qualifiers
for the their parameters.
This is not and exhaustive patch. This only
targets obvious places where we can use
the const qualifier. More changes will be
submitted in future patches, if required.
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
vlapic_vmx_vapic_set_tmr is nobody use now, remove it first to avoid
build warning.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
ACRN currently do not support SMM and SMI. Print one explicit warning
for it.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
From SDM Vol3 Table 10-1 Local APIC Register Address Map. The 0x3F0 is
reserved.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Currently, ACRN hasn't expose x2apic capability through cpuid.
And x2apic related code in vlapic.c has no real functionality. This
patch clear related code.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
In interrupt-window exiting handler, disable it directly even there has
pending interrupts. The later acrn_handle_pending_request will
re-evaluation and re-enable it if needed.
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch adds code to support read-only RTC support for guests
run by partition mode ACRN. It supports RW for CMOS address port 0x70
and RO for CMOS data port 0x71. Reads to CMOS RAM offsets are fetched
by reading CMOS h/w directly and writes to CMOS offsets are discarded.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
-- Change these APIs to void type, add pre-conditions,
and move parameter-check to upper-layer functions.
handle_vpic_irqline
vpic_set_irqstate
vpic_assert_irq
vpic_deassert_irq
vpic_pulse_irq
vpic_get_irq_trigger
handle_vioapic_irqline
vioapic_assert_irq
vioapic_deassert_irq
vioapic_pulse_irq
-- Remove dead code
vpic_set_irq_trigger
v1-->v2:
add cleanup vpic
change some APIs to void type, add pre-conditions,
and move the parameter-check to upper-layer functions.
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
after updated cpu context get/set method, the vcpu_dumreg cmd is not
correct anymore as the registers may read from VMCS but meantime hv
shell may not be running on target vcpu.
this patch take use of smp_call_function for vcpu dumpreg and make the
dump always come from correct vcpu.
v2:
- use str pointer to get vcpu_dumpreg context instead of print out directly
in notify handler.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
take use of VCPU_NOTIFY vector, add smp_call_function support.
added a per_cpu field smp_call_info, and make each smp_call_function
is not re-entered, and the caller CPU is returned when all the target
CPUs complete the call.
v4:
- remove global lock
- take use of wait_sync_change function to do the sequence sync
v3:
- remove per_cpu lock in smp_call_info
- use a global lock to ensure smp_call_function sequence
- use pcpu_sync_sleep to wait IPI complete
v2:
- after new smp function come, if old one exist, changed from overwirte
with the new one to ignore the new one.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
pcpu_sync_sleep monitor "uint64_t sync" change to "1UL << mask_bit",
which is not very clear to take use of it.
change it to wait_sync_change, means monitor "uint64_t sync" change to
"wake_sync", make the function clear to use.
And expose it for the usage of the following patches.
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Now the DM has adopted the new VHM request state transitions and
REQ_STATE_FAILED is obsolete since neither VHM nor kernel mediators will set the
state to FAILED.
This patch drops the definition to REQ_STATE_FAILED in the hypervisor, makes
''processed'' unsigned to make the compiler happy about typing and simplifies
error handling in the following ways.
* (dm_)emulate_(pio|mmio)_post no longer returns an error code, by introducing a
constraint that these functions must be called after an I/O request
completes (which is the case in the current design) and assuming
handlers/VHM/DM will always give a value for reads (typically all 1's if the
requested address is invalid).
* emulate_io() now returns a positive value IOREQ_PENDING to indicate that the
request is sent to VHM. This mitigates a potential race between
dm_emulate_pio() and pio_instr_vmexit_handler() which can cause
emulate_pio_post() being called twice for the same request.
* Remove the ''processed'' member in io_request. Previously this mirrors the
state of the VHM request which terminates at either COMPLETE or FAILED. After
the FAILED state is removed, the terminal state will always be constantly
COMPLETE. Thus the mirrored ''processed'' member is no longer useful.
Note that emulate_instruction() will always succeed after a reshuffle, and this
patch takes that assumption in advance. This does not hurt as that returned
value is not currently handled.
This patch makes it explicit that I/O emulation is not expected to fail. One
issue remains, though, which occurs when a non-aligned cross-boundary access
happens. Currently the hypervisor, VHM and DM adopts different policy:
* Hypervisor: inject #GP if it detects that the access crossed boundary
* VHM: deliver to DM if the access does not complete falls in the range of a
client
* DM: a handler covering part of the to-be-accessed region is picked and
assertion failure can be triggered.
A high-level design covering all these components (in addition to instruction
emulation) is needed for this. Thus this patch does not yet cover the issue.
Tracked-On: #875
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
MISARC has requirements about Marco redefinition, usage of ++ or -- and
assignment operator in boolean expression. This patch is used to solve
these violations.
The modifications are summarized as following:
1.The HC_VM_SET_MEMORY_REGION, HC_VM_GPA2HPA, HC_VM_SET_MEMORY_REGIONS are
redefined twice in acrn_hv_des.h, so delete them to solve the macro
redefinition violations.
2.The macro BUS_LOCK are redefined in bits.h and atomic.h, then delete
the declaration in both two files, add a new declaration in cpu.h and
include the header file.
3.modify the code to solve the improper usage of -- operators in string.c.
4.modify the while loop to for loop to avoid assignment operator in
boolean expression in vlapic.c.
v1 -> v2:
*Modify the format of commit logs and signed-off name.
*Modify the code format from 'd = d-1;' to 'd--;' to be better.
Signed-off-by: Junjun Shan <junjun.shan@intel.com>
Thare some debug specific code which don't run on release version, such as vmexit_time,
vmexit_cnt, sbuf related codes, etc...
This patch encloses the codes with #ifdef HV_DEBUG.
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This commit cleans up the irq APIs which are a bit confusing.
- pri_register_handler(), normal_register_handler() and
common_register_handler() into request_irq(), and removed
the unnecessary struct irq_request_info;
- rename the unregister_common_handler() to free_irq();
After the revision, the common irq APIs becomes:
- int32_t request_irq(uint32_t irq,
irq_action_t action_fn,
void *action_data,
const char *name)
- void free_irq(uint32_t irq)
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since vector is x86 specific concept, we'd like to hide it from common irq APIs.
This commit
- adds static irq:vector mappings for special interrupt such as timer
and cpu notification;
- reserves the irq and vector at initialization;
- removed the vector argument in pri_register_handler(), get reserved vector
from irq_desc in common_register_handler().
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since we don't support shared irq, dev_handler_node which works as action node,
is not needed anymore.
This commit removes the dev_handler_node struct and does some relevant changes,
including:
- moves necessary fields to struct irq_desc: action, priv_data, name; and
removes unused handler_data;
- changes return type of pri_/normal_register_handler() from dev_handler_node*
to int32_t, which is irq num (>= 0) on success, and errno (> 0) on failure.
- changes unregister_irq_handler() to take argument unint32_t instead of
dev_handler_node*;
- changes are made to the places where these APIs are called.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Because multiple physical devices sharing a single physical pin would be
assigned to a same VM, so UOS could handle the irq sharing. So that we could
remove the physical irq sharing support in HV.
This commit removes the irq sharing support, changes including:
- removed the dev_list field in irq_desc, and clean up codes for the list
operation;
- replace IRQ_ASSIGNED_SHARED and IRQ_ASSIGNED_NOSHARE with IRQ_ASSIGNED;
- remove argument indicating irq is shared;
- revise irq request flow for pt devices to remove dependency on irq sharing:
register irq on adding remapping entery and unregister irq on removal an
entry, and do not register/unregister at remapping an entry.
Signed-off-by: Yan, Like <like.yan@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MISRA-C requires that shift operation cannot exceed the word length.
What this patch does:
- Add the pre condition for 'init_lapic' regarding to 'pcpu_id'
Currently, max 8 physical cpus are supported.
Re-design will be required if we would like to support more physical
cpus.
So, add the pre condition here to avoid the unintentional shift
operation mistakes.
- Replace the id type with uint8_t in 'vlapic_build_id'
- For VM0, it uses 'lapic_id' as its id, which is uint8_t.
- For non VM0, it uses 'vcpu_id' as its id, which is uint16_t.
Cast this id to uint8_t to make sure there is no loss of data after
left shifting 24U.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add two files to do compile time assert.
One is arch specific, and put in hypervisor/arch/x86/.
The other one is common, and put in hypervisor/common/.
If the statement is not true, there will be error during compile time.
The file will not increase the size of HV binary.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move the definitions of offset of fields in boot_ctx to the same header
file that the struct boot_ctx is in, to reduce the possibility that some
modification would make the offset inconsistant with the fields within
the structure.
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Sometimes the CPUID(0x15) still returns the zero tsc frequency. In such case
the base frequency of cpuid(0x16) is used as tsc frequency.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The CPUID with 0x16 leaf can report the CPU hz and it is faster. And this
mechanism is widely used in Linux kernel.(native_calibrate_cpu).
As this is not supported on APL, currently sos adds the cpu_khz callback
in pv_cpu_ops to read the cpu frequency. This is quite hack.
(In fact HV leverages the cpuid with 0x40000010 leaf).
If it is emulated, the sos and guest os can use the cpuid to obtain the
corresponding cpu_khz. Then the cpu_khz in pv_cpu_ops can be removed.
V2: Simple the logic of adding unsupported cpuid level entry after the
CPUID 0x16 is emulated. Initialize the vcpuid_entry explicitly with zero
for the unsupported cpuid.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In order to add the emulation of CPUID 0x16, it is expected that it is
handled when the CPUID 0x15 is supported. Otherwise we will have to emulate
other CPUID leaf, which makes it complex.
At the same time as Acrn HV has the requirements on the CPUs, it is restricted
that the CPUID should support the leaf >=0x15.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- clear run context when reset vcpu;
- destroy trusty without erase trusty memory when reset vm;
changelog:
v1 -> v2: fix misra violation on calling memset();
Signed-off-by: Sun Victor <victor.sun@intel.com>
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Chi Mingqiang <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- 'reboot.c' defines 'warm_reboot()' only, and this
function is deprecated.
- remove the eXecution attribute of 'mttr.h'
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The bracket is required when the level of precedence of
the operators is less than 13. Add the bracket to logical
conjunctions. The commit applys the rule to the files under
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The bracket is required when the level of precedence of
the operators is less than 13. Add the bracket to logical
conjunctions. The commit applys the rule to the files under
hypervisor/arch/x86/guest/*
Signed-off-by: Yang, Yu-chu <yu-chu.yang@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
to avoid send IPI to self, also improve the related code:
1. get_cpu_id is uint16_t now
2. MISRA-C requirement. like add {}
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Current EPT check runs after EPT enabling in init_exec_ctrl. This
patch fixes wrong order.
Signed-off-by: Edwin Zhai <edwin.zhai@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
ACRN in partition mode emulates UART for the VMs directly launced
from HV. This patch adds an option to enable/disable vUART for a
VM.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
For Partition mode ACRN, kernel load address and Boot args load address
are hardcoded. Boot args are currently passed from vm description for
each VM. Renamed init_vm0_boot_info to init_vm_boot_info.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Use func(void) rather than func() for the function declaration and
definition based on MISRAC requirement.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
MISRAC requires that a switch statement shall contain a default clause.
This patch add the default clause and some comments for the ones
violated the rule.
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There is no SOS and device model in strict partition mode. ACRN emulates IO for
virtual devices. Any access to IO not backed by HV should return all FFs on read
and writes should be discarded.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
ACRN boots multiple OS in partitioning mode. This patch adds code to assign
vm_id in the vm data structure to be same as the one assigned at compile time.
This makes the vm id deterministic for each VM booted from HV directly.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
ACRN in partition mode does not have vector and APIC ID remapping for
device interrupts. Only MSIs are supported. No IOAPIC and legacy interrupts
for the VMs in ACRN partition mode.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
This patch is an extension to the commit 6643adff8b.
It uses the mptable API to build mptable for each VM booted by ACRN in partition mode.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Adding code to map memory for UOS in partitioning mode ACRN.
HPA starting above 4GB is used for UOS memory. Supports only contiguous memory
from host for UOS. Current implementation supports only 2 GB for UOS memory.
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
