This is a workaround for the issue in efi-stub: If the EFI option is loaded to a memory range which is not all zero filled,
it's possible the garbage string appended to bootloader name string.
Which could make system can't boot.
Add an extra space to the EFI option to make sure space could be used to detect the end of bootloader name string.
Once the fixing patch is merged, we don't need this extra space.
But to make old ACRN work, we'd like to keep the space here.
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Delete Redhad virtio drive, only keep Oracle as reference.
Delete "inject driver into ISO" part, and update to the latest workable
method.
In a word, QA just need maintain one latest workable method in GSG for creating WaaG image.
Signed-off-by: ffshen <fangfang.shen@intel.com>
Fix links in documentation that have moved (e.g.,
clearlinux.org/documentation moved to docs.01.org/clearlinux/latest).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the "Using Ubuntu as the Service OS" tutorial to tweak the instructions
pertaining to the Grub bootloader configuration. Specifically, update to reflect
the content of '/etc/default/grub' in Ubuntu 18.04 and also make loading the
Service OS kernel the default.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update the Kata and ACRN tutorial based on the latest SW components. Many
previous steps are no longer required and have been removed.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Update the "Using SDC Mode on the NUC" tutorial to use ACRN v1.5. The Clear
Linux used in this update is 32080 which is also the first release that includes
a Service VM (linux-iot-lts2018-sos) kernel that supports MACVLAN and MACVTAP,
both of which are need to run Kata Containers on ACRN.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Fix the name of the Docker Container image that is used to build the kernel
for an RTVM (Preempt-RT kernel) when that image was built by the user
him/herself.
Tracked-On: #4322
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
* Add more details about Kata Containers and ACRN in the introduction
* Adjust and correct some of the instructions
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
- commit 69152647 ("hv: Use virtual APIC IDs for Pre-launched VMs")
enables virtual APIC IDs for pre-launched VMs thus xapic_phys is no
longer needed to force guest xAPIC to work in physical destination mode.
- HVC is not available in logical partition mode and "console=hvc0" should
be removed from guest Linux bootargs.
Tracked-On: #3854
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Victor Sun <victor.sun@intel.com>
1. Update acrn.efi name in acrn ootb scripts
2. Add licenses to acrn ootb scripts
3. Add format U disk step
4. Add execute permission to ootb script
5. Fix wrong img name
6. update clearlinux version to 31600
Signed-off-by: Lei, Lu <leix.lu@intel.com>
Cleaned up the presentation and formatting problems from the conversion
to ReST, along with English grammar and spelling edits.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Change APL getting started guide to KBL getting started guide;
Merge some of the contents into preempt-rt getting started guide;
Move the modified kbl getting started guide to the behind of the configuration tutorials;
Fix issues for acrn_quick_setup.sh script.
Signed-off-by: lirui34 <ruix.li@intel.com>
Remove redundant copy of ovmf.fd firmware as the lunach script now
instructs the DM to user the OVMF.fd firmware directly from the rootfs.
Tracked-On: #3972
Signed-off-by: Tonny Tzeng <tonny.tzeng@intel.com>
As reported in PR #3959, doc build errors were being masked by a script
error. This PR fixes a chunk of them.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
PR #3665 moved the doc build folder, so files referenced via directives
had an incorrect path (need to add an additional ../../ to the front of
relative paths that were referencing files outside of the doc folder).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
move virtio-i2c doc from tutorials to developer-guilders/hld and add
entry for virtio-i2c in hld-virtio-devices
Signed-off-by: Gao Junhao <junhao.gao@intel.com>
Move the "Building ACRN in Docker" guide to the "Try using ACRN" section to be
more prominently visible. Reference it from the main "Build ACRN from Source"
user guide.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
This tutorial is introducing how to build service vm, preempt_rt kernel and
industry scenario hypervisor; Update built kernel and launch the preempt_rt vm.
Signed-off-by: lirui34 <ruix.li@intel.com>
Editorial tweaks to the "Real-Time (RT) Performance Analysis on ACRN" document,
mostly to improve readibility, no technical content change.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
1. Fix the broken link to dwonload UP2 Board BIOS
2. In Clear Linux 31030 the acrn.apl-up2.sbl name is changed to
acrn.apl-up2.sbl.sdc.32.out, so we need to update the creaet-up2-imgages.sh
3. Command "swupd verify --install -m" has been superseded, use "swupd
os-install -V" instead.
Signed-off-by: Lei, Lu <leix.lu@intel.com>
So far the patches are only suite for Celadon Android 9.
Need to specify the Android 9 repo branch to apply patches and
build Celadon image.
Signed-off-by: lirui34 <ruix.li@intel.com>
Tweak the "vUART configuration" tutorial to fix a few typos and change some
formatting to improve its readability.
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
* Update the launch scripts provided as examples on how to launch a Zephyr,
VxWorks or Windows User VM to directly use the 'OVMF.fd' bios file installed
by default in '/usr/share/acrn/bios/'
* Remove the OVMF.fd that was kept under 'doc/tutorials' (no longer needed)
* Adapt the tutorials to reflect this change
Tracked-On: #3673
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
ACRN tag is ONLY specific to one Clear Linux version.
For the tutorials, we just need to make sure the validated version is functional.
Signed-off-by: lirui34 <ruix.li@intel.com>
An offline configure tool is designed to configure the BOARD and VM configurations.
Here is the tutorial to tell people how to use it.
Signed-off-by: lirui34 <ruix.li@intel.com>
modify partition desc table of up2 board to make it consistent with
launch uos script.
Signed-off-by: Lei Lu <leix.lu@intel.com>
Signed-off-by: Victor Sun <victor.sun@intel.com>
Changing from just describing the supported hardware to a new hardware
support matrix based on the usage scenarios.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
1. The origin clearlinux version 29070 in this doucment example is not
workable with acrn latest code, update the clearlinux version.
2. Replace the sos_console_login.png with vm_console_login.png
Signed-off-by: Lei Lu <leix.lu@intel.com>
pci_dev_config in VM configure stores all the PCI devices for a VM. Besides PT
devices, there're other type devices, like virtual host bridge. So rename ptdev
to pci_dev for these configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Update merged PR #3463 with format and wording improvements.
(Not linked yet into the document navigation)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Take the existing ACRN technical documentation and reorganize its
presentation to be persona and use-case based, in preparation for adding
new scenario/use-case based architecture introduction and getting
started documents.
Introduce a more graphical home page and theme color tweaks.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Change WaaG launch script to the default ``launch_win.sh``,
and also provide one OVMF.fd binary in order to launch WaaG.
Change SOS / UOS to Service VM / Guest VM.
Signed-off-by: lirui34 <ruix.li@intel.com>
