Customer might have specific folder where stores their own configurations
for their customized scenario/board, so add TARGET_DIR parameter to support
option that build hyprvisor with specified configurations.
So valid usages are: (target = all | hypervisor)
1. make <target>
2. make <target> KCONFIG_FILE=xxx [TARGET_DIR=xxx]
3. make <target> BOARD=xxx SCENARIO=xxx [TARGET_DIR=xxx]
4. make <target> BOARD_FILE=xxx SCENARIO_FILE=xxx [TARGET_DIR=xxx]
5. make <target> KCONFIG_FILE=xxx BOARD_FILE=xxx SCENARIO_FILE=xxx [TARGET_DIR=xxx]
If TARGET_DIR parameter is not specified in make command, hypervisor will be
built with board configurations under hypervisor/arch/x86/configs/ and scenario
configurations under hypervisor/scenarios/. Moreover, the configurations would
be overwritten if BOARD/SCENARIO files are specified in make command.
If TARGET_DIR parameter is specified in make command, hypervisor will be built
with configuration under that folder if no BOARD/SCENARIO files are specified.
When BOARD/SCENARIO files are available in make command, the TARGET_DIR is used
to store configurations that BOARD/SCENARIO file provided, i.e. Configurations
in TARGET_DIR folder will be overwritten.
Tracked-On: #4517
Signed-off-by: Victor Sun <victor.sun@intel.com>
When user use make parameters to specify BOARD and SCENARIO, there might
be some conflict because parameter of KCONFIG_FILE/BOARD_FILE/SCENARIO_FILE
also includes BOARD/SCENARIO info. To simplify, we only alow below valid
usages:
1. make <target>
2. make <target> KCONFIG_FILE=xxx
3. make <target> BOARD=xxx SCENARIO=xxx
4. make <target> BOARD_FILE=xxx SCENARIO_FILE=xxx
5. make <target> KCONFIG_FILE=xxx BOARD_FILE=xxx SCENARIO_FILE=xxx
Especially for case 1 that no any parameters are specified:
a. If hypervisor/build/.config file which generated by "make menuconfig"
exist, the .config file will be loaded as KCONFIG_FILE:
i.e. equal: make <target> KCONFIG_FILE=hypervisor/build/.config
b. If hypervisor/build/.config file does not exist,
the default BOARD/SCENARIO will be loaded:
i.e. equal: make <target> BOARD=$(BOARD) SCENARIO=$(SCENARIO)
Tracked-On: #4517
Signed-off-by: Victor Sun <victor.sun@intel.com>
As ACRN prepares to support servers with large amounts of memory
current logic to allocate space for 4K pages of EPT at compile time
will increase the size of .bss section of ACRN binary.
Bootloaders could run into a situation where they cannot
find enough contiguous space to load ACRN binary under 4GB,
which is typically heavily fragmented with E820 types Reserved,
ACPI data, 32-bit PCI hole etc.
This patch does the following
1) Works only for "direct" mode of vboot
2) reserves space for 4K pages of EPT, after boot by parsing
platform E820 table, for all types of VMs.
Size comparison:
w/o patch
Size of DRAM Size of .bss
48 GB 0xe1bbc98 (~226 MB)
128 GB 0x222abc98 (~548 MB)
w/ patch
Size of DRAM Size of .bss
48 GB 0x1991c98 (~26 MB)
128 GB 0x1a81c98 (~28 MB)
Tracked-On: #4563
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- need to specify the load_addr in the multiboot2 address tag. GRUB needs
it to correctly calculate the ACRN binary's load size if load_end_addr is
a non-zero value.
- multiboot2 can be enabled if hypervisor relocation is disabled.
- print the name of the boot loader. This might be helpful if the boot
loader, e.g. GRUB, inludes its version in the name string.
Tracked-On: #4441
Signed-off-by: Victor Sun <victor.sun@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
hypervisor/arch/x86/configs/$(BOARD)/ve820.c is used to store pre-launched
VM specific e820 entries according to memory configuration of customer.
It should be a scenario based configurations but we had to put it in per
board foler because of different board memory settings. This brings concerns
to customer on configuration orgnization.
Currently the file provides same e820 layout for all pre-launched VMs, but
they should have different e820 when their memory are configured differently.
Although we have acrn-config tool to generate ve802.c automatically, it
is not friendly to modify hardcoded ve820 layout manually, so the patch
changes the entries initialization method by calculating each entry item
in C code.
Tracked-On: #4458
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Introduce SRIOV capability field for pci_vdev and add SRIOV capability
interception entries.
Tracked-On: #4433
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
add vpci bridge operations in hypervisor, to avoid SOS mis-operations
to affect other VM's PCI devices.
assumption: before hypervisor bootup, the physical pci-bridge shall be
configured correctly by BIOS or other bootloader; for ACS (Access
Control Service) capability, it is configured by BIOS to support the
devices under it to be isolated and allocated to different VMs.
to simplify the emulations of vpci bridge, set limitations as following:
1. expose all configure space registers, but readonly
2. BIST not support; by default is 0
3. not support interrupt, including INTx and MSI.
TODO:
1. configure tool can select whether a PCI bridge is emulated or pass
through.
Open:
1. SOS how to reset PCI device under the PCI bridge?
Tracked-On: #3381
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Eddie Dong <eddie.dong@Intel.com>
As part of rdt cat refactoring, goal is to combine all rdt
specific features such as CAT under one module. So renaming
rdt resouce specific files such as cat.c/.h to generic rdt.c/.h
files.
Tracked-On: #3715
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize mmap info of acrn mbi when boot from multiboot2 protocol,
with this patch acrn hv could boot from multiboot2;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add multiboot2 header info in HV image so that bootloader could
recognize it.
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Initialize and sanitize a acrn specific multiboot info struct with current
supported multiboot1 in very early boot stage, which would bring below
benifits:
- don't need to do hpa2hva convention every time when refering boot_regs;
- panic early if failed to sanitize multiboot info, so that don't need to
check multiboot info pointer/flags and panic in later boot process;
- keep most code unchanged when introduce multiboot2 support in future;
Tracked-On: #4419
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We hit build issue if the ld version is 2.34:
error: PHDR segment not covered by LOAD segment
One issue was created to binutils bugzilla system:
https://sourceware.org/bugzilla/show_bug.cgi?id=25585
From the ld guys comment, this is not an issue of 2.34. It's an
issue fixing of the old ld. He suggested to add option
--no-dynamic-linker
to ld if we don't depend on dynamically linker to loader our binary.
Tracked-On: #4415
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
BVT (Borrowed virtual time) scheduler is used to schedule vCPUs on pCPU.
It has the concept of virtual time, vCPU with earliset virtual time is
dispatched first.
Main concepts:
tick timer:
a period tick is used to measure the physcial time in units of MCU
(minimum charing unit).
runqueue:
thread in the runqueue is ordered by virtual time.
weight:
each thread receives a share of the pCPU in proportion to its
weight.
context switch allowance:
the physcial time by which the current thread is allowed to advance
beyond the next runnable thread.
warp:
a thread with warp enabled will have a change to minus a value (Wi)
from virtual time to achieve higher priority.
virtual time:
AVT: actual virtual time, advance in proportional to weight.
EVT: effective virtual time.
EVT <- AVT - ( warp ? Wi : 0 )
SVT: scheduler virtual time, the minimum AVT in the runqueue.
Tracked-On: #4410
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The previous fcf-protection fix broke the old gcc (older than
gcc 8 which is common on Ubuntu 18.04 and older distributions).
We only add fcf-protection=none for gcc8 and newer.
Tracked-On: #4358
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
In some build env (Ubuntu 19.10 as example), gcc enabled the option
-fcf-protection by default. But this option is not compatible with
-mindirect-branch. Which could trigger following build error:
fail to build with gcc-9 [error: ‘-mindirect-branch’ and
‘-fcf-protection’ are not compatible]
-mindirect-branch is mandatory for retpoline mitigation and always
enabled for ACRN build. We disable -fcf-protection here for ACRN
build.
Tracked-On: #4358
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Wu Binbin <binbin.wu@intel.com>
This simple event implemention can only support exclusive waiting
at same time. It mainly used by thread who want to wait for special event
happens.
Thread A who want to wait for some events calls
wait_event(struct sched_event *);
Thread B who can give the event signal calls
signal_event(struct sched_event *);
Tracked-On: #4329
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For now, we set NOOP scheduler as default. User can choose IORR scheduler as needed.
Tracked-On: #4178
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IO sensitive Round-robin scheduler aim to schedule threads with
round-robin policy. Meanwhile, we also enhance it with some fairness
configuration, such as thread will be scheduled out without properly
timeslice. IO request on thread will be handled in high priority.
This patch only add a skeleton for the sched_iorr scheduler.
Tracked-On: #4178
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The $(BOARD)_acpi_info.h is generated by acrn-config tool, remove this
header in make clean would cause failure when user finish configuring
in webUI and start to make acrn-hypervisor by the command
"make hypervisor BOARD=xxx SCENARIO=yyy" because we mandatory do make
clean before making hypervisor.
The patch replace the file removal with a warning string to hint user
to check the file validity.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
The *.mk files under misc/acrn-config/library are all rules for hypervisor
makefiles only, so move these files to hypervisor/scripts/makefile/ folder.
The folder of acrn-config/library/ will be used to store python script lib only.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Terry Zou <terry.zou@intel.com>
The board specific $(BOARD)_acpi_info.h is generated by acrn-config tool,
we should clean it up before build hypervisor, otherwise the file could be
referenced by next build process if no config XMLs is specified.
Tracked-On: #3779
Signed-off-by: Victor Sun <victor.sun@intel.com>
Currently make hypervisor will depend on a $(BOARD).config file to load
board defconfig which triggered by oldconfig process, this will block
make from XMLs for a new board because $(BOARD).config never exist.
This requires us to patch configuration for new board earlier than make
oldconfig.
Tracked-On: #4067
Signed-off-by: Victor Sun <victor.sun@intel.com>
The DMAR info is board specific so move the structure definition to board.c.
As a configruation file, the whole board.c could be generated by acrn-config
tool for each board.
Please note we only provide DMAR info MACROs for nuc7i7dnb board. For other
boards, ACPI_PARSE_ENABLED must be set to y in Kconfig to let hypervisor parse
DMAR info, or use acrn-config tool to generate DMAR info MACROs if user won't
enable ACPI parse code for FuSa consideration.
The patch also moves the function of get_dmar_info() to vtd.c, so dmar_info.c
could be removed.
Tracked-On: #3977
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch decouple some scheduling logic and abstract into a scheduler.
Then we have scheduler, schedule framework. From modulization
perspective, schedule framework provides some APIs for other layers to
use, also interact with scheduler through scheduler interaces.
Tracked-On: #3813
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch implements the minimum set of TLFS functionality. It
includes 6 vCPUID leaves and 3 vMSRs.
- 0x40000001 Hypervisor Vendor-Neutral Interface Identification
- 0x40000002 Hypervisor System Identity
- 0x40000003 Hypervisor Feature Identification
- 0x40000004 Implementation Recommendations
- 0x40000005 Hypervisor Implementation Limits
- 0x40000006 Implementation Hardware Features
- HV_X64_MSR_GUEST_OS_ID Reporting the guest OS identity
- HV_X64_MSR_HYPERCALL Establishing the hypercall interface
- HV_X64_MSR_VP_INDEX Retrieve the vCPU ID from hypervisor
Tracked-On: #3832
Signed-off-by: wenwumax <wenwux.ma@intel.com>
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
it uses builtin function(__builtin_popcountl)in bitmap_weight(),
it will use the 'popcnt' instruction,
this patch enable 'popcnt' instruction support in Makefile
Tracked-On: #3663
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Add " with acrn-config" tag in build info when user build hypervisor with
acrn-config xmls would be helpful to identify the hypervisor configuration
in current build is from acrn-config xml or from source code.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
Previously we generate config patch based on config xml in toplevel Makefile,
it brings two issues:
1. we could not generate xml configuration patch with hypervisor source only;
2. The github commit info of current code base which is defined in version.h
will be overwritten by the new generated config patch, then the lost commit
info would impact build identify and bug reproducing.
This patch fixed these two issues. Besides, the patch also modify the logic of
platform_acpi_info file existence judgement, which need to be depends on the
acrn-config patch.
Tracked-On: #3602
Signed-off-by: Victor Sun <victor.sun@intel.com>
1. if SCENARIO=$(SCENARIO) is specified in make param, then override
the default CONFIG_$(SCENARIO) value in existed .config. This means
we don't need to modify the default SCENARIO config in Kconfig file
to build the hypervisor;
2. Some board name shortcuts like apl-nuc/kbl-nuc-i7 need to be converted
to official board name to make sure overrides working;
3. Previously make sbl-hypervisor did not load the defconfig so the
defconfig for boards are lost, this patch fix this issue;
4. remove SCENARIO param when make hypervisor, because SCENARIO could
be got from SCENARIO_NAME which parsed from .config;
Tracked-On: #3593
Signed-off-by: Victor Sun <victor.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
We are trying to add both industry and sdc images to CL build. To
maintain the build interface unchanged (no change from CL side), we
extend the build command to generate the different target images.
To identity different images, we use rule:
$(HV_FILE).$(BOARD).$(FIRMWARE).$(SCENARIO)
as target image file name.
Tracked-On: #3593
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Now that ACPI is enabled for pre-launched VMs, we can remove all mptable code.
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Statically define the per vm RSDP/XSDT/MADT ACPI template tables in vacpi.c,
RSDP/XSDT tables are copied to guest physical memory after checksum is
calculated. For MADT table, first fix up process id/lapic id in its lapic
subtable, then the MADT table's checksum is calculated before it is copies to
guest physical memory.
Add 8-bit checksum function in util.h
Tracked-On: #3601
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Hardcode "RELEASE=0" will cause the value of "CONFIG_RELEASE"
to be 'n' in kconfig.mk, it will be overwritten "CONFIG_RELEASE"
with Kconfig setting.
Tracked-On: #3565
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Junjie Mao <junjie.mao@intel.com>
Add emulated PCI device configure for SOS to prepare for add support for customizing
special pci operations for each emulated PCI device.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
now the dependency is like this in Makefile:
acrn.bin << xxxx.a << xxxx.obj
if excute 'make' in hypervsior fold for the first time,
it can generate acrn.bin, if excute 'make' for second
time, it can not do the final link because there are
the same timestamp for acrn.bin and xxxx.a generated by
previous build, add PHONY to fix this issue.
Tracked-On: #3542
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Align SOS pci device configure with pre-launched VM and filter pre-launched VM's
PCI PT device from SOS pci device configure.
Tracked-On: #3475
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Add to include acrn.32.out during cl rpm
generation as acrn.(board).32.out
This is required for Hybrid mode bringup in multios
Tracked-On:#3487
Signed-off-by: Nikhil Rane <nikhil.rane@intel.com>
This patch is to clean-up acrn-hypervisor root directory, targt only 5 folders under acrn-hypervisor:1.hypervisor,2.devicemodel,3.misc,4.doc,5.build
Tracked-On: #3482
Signed-off-by: Terry Zou <terry.zou@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Per community requirement;up to three post-launched VM might be
needed for some automotive SDC system, so add SDC2 scenario to
satisfy this requirement.
Tracked-On: #3429
Signed-off-by: fuzhongl <fuzhong.liu@intel.com>
Reviewed-by: Victor Sun <victor.sun@intel.com>
In release environment, binary files must be stripped in
order to remove debugging code sections and symbol information
that aid attackers in the process of disassembly and reverse
engineering.
Use '-s' linking option to remove symbol table and relocation
information from release binaries.
Tracked-On: #3427
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yonghua Huang <yonghua.huang@intel.com>
Since 9c81f4c32c ("hv:build library to lib_mod.a"), the parallel build
system was broken. You cannot use "make -j #" to build ACRN.
To fix this we need to declare explicit rules for the files to be built.
Also remove "$(LIB_FLAGS): lib " and " MOD_DEPS " since they are
redundancy after this change.
This closes#3351
Tracked-On: projectacrn#3351
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Reviewed-by: Binbin Wu <binbin.wu@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
there is a build error if we only build debug/release library
because missing the build/modules folder
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
modified: Makefile
modified: debug/Makefile
modified: release/Makefile
support compiling system initialization code
to sys_init_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
support compiling virtual platform hypercall to vp_hcall_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling virtual platform trusty to vp_trusty_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling virtual platform device model layer
to vp_dm_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling virtual platform base layer to
vp_base_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling hw management code to hw_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
support compiling boot code to boot_mod.a
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
modified: Makefile
