Reserved bits in a 8-bit PAT field has been checked in pat_mem_type_invalid.
Remove this redundant check "(PAT_FIELD_RSV_BITS & field) != 0UL" in
write_pat_msr.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Input 'vcpu_id' and the state of target vCPU should be validated
properly:
- 'vcpu_id' shall be less than 'vm->hw.created_vcpus' instead
of 'MAX_VCPUS_PER_VM'.
- The state of target vCPU should be "VCPU_PAUSED", and reject
all other states.
Tracked-On: #4245
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When user use make menuconfig to configure memory related kconfig items,
we need add range check to avoid compile error or other potential issues:
CONFIG_LOW_RAM_SIZE:(0 ~ 0x10000)
the value should be less than 64KB;
CONFIG_HV_RAM_SIZE: (0x1000000 ~ 0x10000000)
the hypervisor RAM size should be supposed between
16MB to 256MB;
CONFIG_PLATFORM_RAM_SIZE: (0x100000000 ~ 0x4000000000)
the platform RAM size should be larger than 4GB
and less than 256GB;
CONFIG_SOS_RAM_SIZE: (0x100000000 ~ 0x4000000000)
the SOS RAM size should be larger than 4GB
and less than 256GB;
CONFIG_UOS_RAM_SIZE: (0 ~ 0x2000000000)
the UOS RAM size should be less than 128GB;
Tracked-On: #4229
Signed-off-by: Victor Sun <victor.sun@intel.com>
Set default CONFIG_KATA_VM_NUM to 1 in SDC scenario so that user could
have a try on Kata container without rebuilding hypervisor.
Please be aware that vcpu affinity of VM1 in CPU partition mode
would be impacted by this patch.
Tracked-On: #4232
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixes potential hypervisor crash when
calling hcall_write_protect_page() with a crafted
GPA in 'struct wp_data' instance, e.g. an invalid
GPA that is not in the scope of the target VM's
EPT address space.
To check the validity for this GPA before updating
the 'write protect' page.
Tracked-On: #4240
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
This patch adds a helper function send_single_nmi. The fisrt caller
will soon come with the following patch.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
This patch installs a NMI handler in acrn IDT to handle
NMIs out of dispatch_exception.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
There are lines of repeated codes in excp/external_interrupt_save_frame
and excp_rsvd. So, this patch defines two .macro, save_frame and restore_frame,
to reduce the repeated codes.
No functional change.
Tracked-On: #3886
Acked-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
The port 0x64 is the status register of i8042 keyboard controller. When
i8042 is defined as ACPI PnP device in BIOS, enforce returning 0xff in
read handler would cause infinite loop when booting SOS VM, so expose
the physical port read in this case;
Tracked-On: #4228
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
In current architecutre, the maximum vCPUs number per VM could not
exceed the pCPUs number. Given the MAX_PCPU_NUM macro is provided
in board configurations, so remove the MAX_VCPUS_PER_VM from Kconfig
and add a macro of MAX_VCPUS_PER_VM to reference MAX_PCPU_NUM directly.
Tracked-On: #4230
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
rename the macro since MAX_PCPU_NUM could be parsed from board file and
it is not a configurable item anymore.
Tracked-On: #4230
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove 'guest_init_pml4' and 'tmp_pg_array' in vm_arch
since they are not used.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
The initialization of "dmar_unit->gcmd" shall be done via reading from
Global Status Register rather than Global Command Register.
Rationale:
According to Chapter 10.4.4 Global Command Register in VT-d spec, Global Command
Register is a write-only register to control remapping hardware.
Global Status Register is the corresponding read-only register to report remapping
hardware status.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
For now, we set NOOP scheduler as default. User can choose IORR scheduler as needed.
Tracked-On: #4178
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Implement .sleep/.wake/.pick_next of sched_iorr.
In .pick_next, we count current object's timeslice and pick the next
avaiable one. The policy is
1) get the first item in runqueue firstly
2) if object picked has no time_cycles, replenish it pick this one
3) At least take one idle sched object if we have no runnable object
after step 1) and 2)
In .wake, we start the tick if we have more than one active
thread_object in runqueue. In .sleep, stop the tick timer if necessary.
Tracked-On: #4178
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
sched_control is per-pcpu, each sched_control has a tick timer running
periodically. Every period called a tick. In tick handler, we do
1) compute left timeslice of current thread_object if it's not the idle
2) make a schedule request if current thread_object run out of timeslice
For runqueue maintaining, we will keep objects which has timeslice in
the front of runqueue and the ones get new replenished in tail.
Tracked-On: #4178
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
We set timeslice to 10ms as default, and set tick interval to 1ms.
When init sched_iorr scheduler, we init a periodic timer as the tick and
init the runqueue to maintain objects in the sched_control. Destroy
the timer in deinit.
Tracked-On: #4178
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
IO sensitive Round-robin scheduler aim to schedule threads with
round-robin policy. Meanwhile, we also enhance it with some fairness
configuration, such as thread will be scheduled out without properly
timeslice. IO request on thread will be handled in high priority.
This patch only add a skeleton for the sched_iorr scheduler.
Tracked-On: #4178
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Signed-off-by: Yu Wang <yu1.wang@intel.com>
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The calculation of the end boundry address is corrected by
adding the size extracted from _DYNAMIC to start address
in type of uint8_t while improving the code by calulating
the end boundry address after scanning, also reducing type
casts accordingly.
Tracked-On: projectacrn#4191
Signed-off-by: Gary <gordon.king@intel.com>
In APICv advanced mode, an targeted vCPU, running in non-root mode, may get outdated
TMR and EOI exit bitmap if another vCPU sends an interrupt to it if the trigger mode
of this interrupt has changed.
This patch try to kick vCPU off to let it get the latest TMR and EOI exit bitmap when
it enters non-root mode again if new coming interrupt trigger mode has changed. Then
fill the interrupt to PIR.
Tracked-On: #4200
Signed-off-by: Li Fei1 <fei1.li@intel.com>
This patch updates kconfig to support server platforms
for increased number of VCPUs per VM and PT IRQ number.
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Tracked-On: #4196
On some platforms, HPA regions for Virtual Machine can not be
contiguous because of E820 reserved type or PCI hole. In such
cases, pre-launched VMs need to be assigned non-contiguous memory
regions and this patch addresses it.
To keep things simple, current design has the following assumptions,
1. HPA2 always will be placed after HPA1
2. HPA1 and HPA2 don’t share a single ve820 entry.
(Create multiple entries if needed but not shared)
3. Only support 2 non-contiguous HPA regions (can extend
at a later point for multiple non-contiguous HPA)
Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Tracked-On: #4195
Acked-by: Anthony Xu <anthony.xu@intel.com>
To handle reboot requests from pre-launched VMs that don't have
GUEST_FLAG_HIGHEST_SEVERITY, we shutdown the target VM explicitly
other than ignoring them.
Tracked-On: #2700
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
ptirq_prepare_msix_remap was called no matter whether MSI/MSI-X was enabled or not
and it passed zero to input parameter virtual MSI/MSI-X data field to indicate
MSI/MSI-X was disabled. However, it barely did nothing on this case.
Now ptirq_prepare_msix_remap is called only when MSI/MSI-X is enabled. It doesn't
need to check whether MSI/MSI-X is enabled or not by checking virtual MSI/MSI-X
data field.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Do vMSI-X remap only when Mask Bit in Vector Control Register for MSI-X Table Entry
is unmask.
The previous implementation also has two issues:
1. It only check whether Message Control Register for MSI-X has been modified when
guest writes MSI-X CFG space at Message Control Register offset.
2. It doesn't really disable MSI-X when guest wants to disable MSI-X.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
1. disable physical MSI before writing the virtual MSI CFG space
2. do the remap_vmsi if the guest wants to enable MSI or update MSI address or data
3. disable INTx and enable MSI after step 2.
The previous Message Control check depends on the guest write MSI Message Control
Register at the offset of Message Control Register. However, the guest could access
this register at the offset of MSI Capability ID register. This patch remove this
constraint. Also, The previous implementation didn't really disable MSI when guest
wanted to disable MSI.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
It's meaningless to sleep a non-running vcpu. Add a state check before
sleep the thread object of the vcpu.
Tracked-On: #4178
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Now, we support schedule inplace. And with cpu sharing, there might be
multi vcpu running on same pcpu. Reschedule request will happen when
switch the running vcpu. If the current vcpu is polling on the IO
completion, it need to be scheduled back to the polling point.
In the polling path, construct a loop for polling, and do schedule in the
loop if needed.
Tracked-On: #4178
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
With cpu-sharing enabled, there are more than 1 vcpu on 1 pcpu, so the
smp_call handler should switch the vmcs to the target vcpu's vmcs. Then
get the info.
dump_vcpu_reg and dump_guest_mem should run on certain vmcs, otherwise,
there will be #GP error.
Renaming:
vcpu_dumpreg -> dump_vcpu_reg
switch_vmcs -> load_vmcs
Tracked-On: #4178
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a header field in acrnlog message to indicate the current
running thread.
Tracked-On: #4178
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We care more about leaf and subleaf of cpuid than vcpu_id.
So, this patch changes the cpuid trace-entry to trace the leaf
and subleaf of this cpuid vmexit.
Tracked-On: #4175
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
PMU is hidden from any guest, UD is expected when guest
try to execute 'rdpmc' instruction.
this patch sets 'RDPMC exiting' in Processorbased
VM-execution control.
Tracked-On: #3453
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Deterministic is important for RTVM. The mitigation for MCE on
Page Size Change converts a large page to 4KB pages runtimely during
the vmexit triggered by the instruction fetch in the large page.
These vmexits increase nondeterminacy, which should be avoided for RTVM.
This patch builds 4KB page mapping in EPT for RTVM to avoid these vmexits.
Tracked-On: #4101
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a option MCE_ON_PSC_WORKAROUND_DISABLED to disable the software
workaround for the issue Machine Check Error on Page Size Change.
Tracked-On: #4101
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Only apply the software workaround on the models that might be
affected by MCE on page size change. For these models that are
known immune to the issue, the mitigation is turned off.
Atom processors are not afftected by the issue.
Also check the CPUID & MSR to check whether the model is immune to the issue:
CPU is not vulnerable when both CPUID.(EAX=07H,ECX=0H).EDX[29] and
IA32_ARCH_CAPABILITIES[IF_PSCHANGE_MC_NO] are 1.
Other cases not listed above, CPU may be vulnerable.
This patch also changes MACROs for MSR IA32_ARCH_CAPABILITIES bits to UL instead of U
since the MSR is 64bit.
Tracked-On: #4101
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
After changing init_vmcs to smp call approach and do it before
launch_vcpu, it could work with noop scheduler. On real sharing
scheudler, it has problem.
pcpu0 pcpu1 pcpu1
vmBvcpu0 vmAvcpu1 vmBvcpu1
vmentry
init_vmcs(vmBvcpu1) vmexit->do_init_vmcs
corrupt current vmcs
vmentry fail
launch_vcpu(vmBvcpu1)
This patch mark a event flag when request vmcs init for specific vcpu. When
it is running and checking pending events, will do init_vmcs firstly.
Tracked-On: #4178
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The default PCI mmcfg base is stored in ACPI MCFG table, when
CONFIG_ACPI_PARSE_ENABLED is set, acpi_fixup() function will
parse and fix up the platform mmcfg base in ACRN boot stage;
when it is not set, platform mmcfg base will be initialized to
DEFAULT_PCI_MMCFG_BASE which generated by acrn-config tool;
Please note we will not support platform which has multiple PCI
segment groups.
Tracked-On: #4157
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Starting with TSC_DEADLINE msr interception disabled, the virtual TSC_DEADLINE msr is always 0.
When the interception is enabled, need to sync the physical TSC_DEADLINE value to virtual TSC_DEADLINE.
When the interception is disabled, there are 2 cases:
- if the timer hasn't expired, sync virtual TSC_DEADLINE to physical TSC_DEADLINE, to make the guest read the same tsc_deadline
as it writes. This may change when the timer actually trigger.
- if the timer has expired, write 0 to the virtual TSC_DEADLINE.
Tracked-On: #4162
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When write to virtual TSC_DEADLINE, if virtual TSC_ADJUST is not zero:
- when guest intends to disarm the tsc_deadline timer, should not arm the timer falsely;
- when guest intends to arm the tsc_deadline timer, should not disarm the timer falsely.
When read from virtual TSC_DEADLINE, if virtual TSC_ADJUST is not zero:
- if physical TSC_DEADLINE is not zero, return the virtual TSC_DEADLINE value;
- if physical TSC_DEADLINE is zero which means it's not armed (automatically disarmed after
timer triggered), return 0 and reset the virtual TSC_DEADLINE.
Tracked-On: #4162
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
xsave area:
legacy region: 512 bytes
xsave header: 64 bytes
extended region: < 3k bytes
So, pre-allocate 4k area for xsave. Use certain instruction to save or
restore the area according to hardware xsave feature set.
Tracked-On: #4166
Signed-off-by: Conghui Chen <conghui.chen@intel.com>
Reviewed-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Name vmsi and vmsix function with verb-object style:
For external APIs, using MODULE_NAME_verb-object style;
For internal APIs, using verb-object style.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
ptirq_msix_remap doesn't do the real remap, that's the vmsi_remap and vmsix_remap_entry
does. ptirq_msix_remap only did the preparation.
Tracked-On: #3475
Signed-off-by: Li Fei1 <fei1.li@intel.com>
Add a Kconfig parameter called UEFI_OS_LOADER_NAME to hold the Service VM EFI
bootloader to be run by the ACRN hypervisor. A new string manipulation function
to convert from (char *) to (CHAR16 *) has been added to facilitate the
implementation.
The default value is set to systemd-boot (bootloaderx64.efi)
Tracked-On: #2793
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
Major changes:
1. Correct handling of device multi-function capability
We only check function zero for this feature. If it has it, we continue
looking at all remaining functions, ignoring those with invalid vendors.
The PCI spec says we are not to probe beyond function zero if it does
not exist or indicates it is not a multi-function device.
2a. Walk *ALL* buses in the PCI space, however,
Before walking the PCI hierarchy, post-processed ACPI DMAR info is parsed
and a map is created between all device-scopes across all DRHDs and the
corresponding IOMMU index.
This map is used at the time of walking the PCI hierarchy. If a BDF that
ACRN is currently working on, is found in the above-mentioned map, the
BDF device is mapped to the corresponding DRHD in the map.
If the BDF were a bridge type, realized with "Header Type" in config space,
the BDF device along with all its downstream devices are mapped to the
corresponding DRHD in the map.
To avoid walking previously visited buses, we maintain a bitmap that
stores which bus is walked when we handle Bridge type devices.
Once ACPI information is included into ACRN about the PCI-Express Root
Complexes / PCI Host Bridges, we can avoid the final loop which probes
all remainder buses, and instead jump to the next Host Bridge bus.
From prior patches, init_pdev returns the pdev structure it created to
the caller. This allows us to complete initialization by updating its
drhd_idx to the correct DRHD.
Tracked-On: #4134
Signed-off-by: Alexander Merritt <alex.merritt@intel.com>
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
On server platforms, DMAR DRHD device scope entries may contain PCI
bridges.
Bridges in the DRHD device scope indicate this IOMMU translates for all
devices on the hierarchy below that bridge.
ACRN is unaware of bridge types in the device scope, and adds these
directly to its internal representation of a DRHD. When looking up a BDF
within these DRHD entries, device_to_dmaru assumes all entries are
Endpoints, comparing BDF to BDF. Thus device to DMAR unit fails, because
it treats a bridge as an Endpoint type.
This change leverages prior patches by converting a BDF to the
associated device DRHD index, and uses that index to obtain the correct
DRHD state.
Handling a bridge in other ways may require maintaining a bus list for
each, or replacing each bridge in the dev scope with a set of all device
BDFs underneath it. Server platforms can have hundreds of PCI devices,
thus making the device scope artificially large is unwieldy.
Tracked-On: #4134
Signed-off-by: Alexander Merritt <alex.merritt@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
ACRN does not support multiple PCI segments in its current form.
But VT-d module uses segment info in its interfaces and
hardcodes it to 0.
This patch cleans up everything related to segment to avoid
ambiguity.
Tracked-On: #4134
Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
