This patch simplifies `get_primary_vcpu` and `vcpu_from_vid`.
The target_vcpu could be get from the index directly.
Tracked-On: #1842
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Correct wrong use of vector where lvt_index should be used.
Tracked-On: #1842
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
pci_vdevs is vpci stuff so it would be better to make it managed by vpci rather than by vm.h,
both sharing mode and partition mode can use pci_vdevs[] to maintain its own
per vm vdev list.
Tracked-On: #2534
Signed-off-by: dongshen <dongsheng.x.zhang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- Do not refer vm_configs[] directly in vm module;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move sanitize_vm_config() from vm.c to vm_config.c;
- move get_vm_config() from vm.h to vm_config.h;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When CAT is supported, UOS can setup acrn_vm_config.clos, to use CAT
feature. Eg.,
struct acrn_vm_config vm_configs[CONFIG_MAX_VM_NUM] = {
{
.guest_flags |= CLOS_REQUIRED,
.clos = 1,
},
};
sanitize_vm_config() will check if CAT is supported and
vm_configs.clos is valid.
Tracked-On: #2462
Signed-off-by: Tao Yuhong <yuhong.tao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
1) The previous implementaion will recalculate the whole EOI-exit bitmap for
each RTE once the destination, trigger mode, delivery mode or vector of a RTE
has changed and update the EOI-exit bitmap for each vcpu of the VM.
In this patch, only set the corresponding bit of EOI-exit bitmap for
a vcpu when a level triggered interrupt has accepted in IRR or clear the
corresponding bit of EOI-exit bitmap for a vcpu when a dege triggered interrupt
has accepted in IRR which means only update a bit of EOI-exit bitmap in a vcpu
when updating TMR.
2) Rename set eoi_exit related API to set eoi_exit_bitmap.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
remove vpci_vdev_array in vm_config struct as it is not used any more;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
There are still some misra-c violations when CONFIG_PARTITION_MODE is defined.
arch/x86/configs:
- remove the unused macro: PRE_LAUNCH_VM_NUM
- pt_dev.c: VMx_CONFIG_PCI_PTDEV_NUM has been defined in partition_config.h,
should not hard code them again in pt_dev.c.
- ve820.c: use "UL" suffix instead of "U" for 64 bits variables.
vmid is uint16_t in ACRN, so vuart_vmid should be uint16_t as well.
Fix another few other miscellaneous misra-c violations.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_post_intr to apicv_post_intr and move it to internal function
since it's only used in vlaic.c.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Since it's only used in vlaic.c
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Move vm_active_cpus from vlapic.c to vm.h since it's vm related
not vlapic related.
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
merge E820_MAX_ENTRIES and NUM_E820_ENTRIES
to E820_MAX_ENTRIES.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
remove hypervisor.h from per_cpu.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
move gva2hva() & hva2gpa() to guest_memory.c,
we will remove hypervisor.h in the future.
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Removed the remaining reference of acrn vm from
inside of vtd.c.
Removed usage of snoopy_mem, and added code to achieve
the same using iommu_snoop.
Initialize iommu_snoop to true in create deault iommu.
Tracked-On: #2496
Signed-off-by: Arindam Roy <arindam.roy@intel.com>
For vcpu.c and vcpu.h,only include some necessary
header files, doesn't include hypervisor.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- now hypervisor.h is the universal set of header file,
this patch doesn't include hypervisor.h, only include
some necessary header files for vm.c and vm.h
-- move 'struct vcpuid_entry' from vm.h to vcpuid.h
-- remove dead code 'enum vm_privilege_level'
-- move 'enum vpic_wire_mode' from vm.h to vpic.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- move functions related vmexit from `guest.h` to `vmexit.h`
- move functions related msr from `guest.h` to `msr.h`
- move functions related vm_sw_loader from `guest.h` to `vm.h`
- move function `vmx_vmrun` from `guest.h` to `vcpu.h`
- move MACROs related to vcpu from `guest.h` to `vcpu.h`
- move MACRO `E820_MAX_ENTRIES` from `guest.h` to `e820.h`
- move MACROs related to irq from `guest.h` to `irq.h`
- rename `guest.h` to `guest_memory.h`
Tracked-On: #2503
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Use acrn_vm_pci_ptdev_config struct for PCI PT devices configuration
in acrn_vm_config, the only needed configure item is PT devices's
vBDF and pBDF info. When init PT devices, the BDF info will be stored
in pci_vdevs[] of acrn_vm.
With this patch, the previous vpci_vdev_array struct is not needed.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Remove redundancy code since they are not used now.
-- remove 'max_ram_blk_base' & 'max_ram_blk_size' in
struct e820_mem_params
-- remove 'gpa_lowtop' in struct vm_hw_info
-- remove MACRO 'UOS_DEFAULT_START_ADDR'
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The partition mode vm config in vm_description.c is abandoned,
so delete the file. Its related struct in vm.h is also removed;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The previous VM configs array for partition mode is inside struct of
vm_config_partition and named as vm_config_array[], now switch to
global vm_configs[];
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- add e820 info in struct acrn_vm;
- rename rebuild_sos_vm_e820() to create_sos_vm_e820();
- add create_prelaunched_vm_e820() for partition mode;
- rename create_e820_table() to create_zeropage_e820() and merge for
both sharing mode and partition mode;
- move create_xxx_vm_e820() to vm.c;
- move create_zeropage_e820() to vm_load.c;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Rename vlapic_deliver_intr to vlapic_receive_intr: ioapic/msi device
deliver an interrupt to lapic.
Rename vlapic_pending_intr to vlapic_find_deliverable_intr: find a
deliverable interrupt which pending in irr and its priority large than ppr.
Rename vlapic_intr_accepted to vlapic_get_deliverable_intr: get the deliverable
interrupt from irr and set it in isr (which also raise ppr update)
Tracked-On: #1842
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
- move `vcpumask2pcpumask` from `guest.c` to `vcpu.c`
- move `prepare_sos_vm_memmap` from `guest.c` to `vm.c`
- rename `guest.c` to `guest_memory.c`
Tracked-On: #2484
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
-- add ept.h, and move ept related api declaration
from mmu.h to ept.h
-- move lookup_address()declaration from mmu.h to pgtable.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
move the following files to dm folder
renamed: include/arch/x86/guest/vioapic.h -> include/dm/vioapic.h
renamed: include/arch/x86/guest/vpic.h -> include/dm/vpic.h
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
1. in UEFI bsp code, not need UEFI macro; it is controlled in makefile.
2. in vm/acpi/interrupt code, unify the API name for SBL & UEFI.
3. remove unnecessary header including and unused code.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
-- move vm_pic() from vm.h to vpic.c since it is
only used in vpic.c
-- move vm_ioapic() from vm.h to vioapic.c
change vioapic_reset(struct acrn_vioapic *vioapic) -->
vioapic_reset(struct acrn_vm *vm)
then vm_vioapic() is only used in vioapic.c
-- move vm_vuart() from vm.h to vuart.c,
now this api is used in vuart.c and shell.c
Tracked-On: #1842
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Reviewed-by: Jason Chen CJ <jason.cj.chen@intel.com>
Reviewed-by: Eddie Dong <eddie.dong@intel.com>
For VM with local apic pt for realtime scenatios, we support virtio device with PMD backend.
But we still need to inject MSI to notify the front-end, to avoid changing the front-end drivers.
Since the lapic is passed through, irq injection to vlapic won't work.
This commit fix it by sending IPI with vector need to inject.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This commit extend lapic pass-through for DM launched VM, generally for hard RT scenarios.
Similar to the partition mode, the vlapic is working under the xapic mode at first, only
when x2apic mode is enabled, lapic is passed through, because the physical LAPICs are
under x2apic mode.
Main changes includes:
- add is_lapic_pt() to check if a vm is created with lapic pt or not, to combine
codes of partition mode and DM launched vm with lapic passthrough, including:
- reuse the irq delievery function and rename it to dispatch_interrupt_lapic_pt();
- reuse switch_apicv_mode_x2apic();
- reuse ICR handling codes to avoid malicious IPI;
- intercept ICR/APICID/LDR msr access when lapic_pt;
- for vm with lapic passthrough, irq is always disabled under root mode.
Tracked-On: #2351
Signed-off-by: Yan, Like <like.yan@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The sos_vm config under arch/x86/configs/$(CONFIG_BOARD) folder should be
customer specific configuration, leave it back to customer.
When hypervisor start building, it will check whether BOARD specific sos_vm.h
exist in configs/$(CONFIG_BOARD) folder. If exist, then include this header;
if not, then include default sos_vm config header under configs/default folder.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Add a API to sanitize vm_configs[] array, in this API, we will do sanity
check for VM configurations and refill some fields in vm_configs[]. If
sanity check is failed, the HV would reject to boot.
About pcpu_bitmap of SOS_VM:
We should not hard code pcpu_bitmap for SOS_VM, this is not convenient for
unconfigured boards. The pcpu_bitmap follows a very simple rule:
All physical CPUs except ocuppied by Pre-launched VMs are all belong to
SOS_VM. In this way, the pcpu_bitmap of a SOS_VM is decided by pcpu_bitmap
status in PRE_LAUNCHED_VMs.
To get the correct pcpu_bitmap of SOS_VM, We need to setup another rule, that
the vm_configs[] array should follow the order of PRE_LAUNCHED_VM - SOS_VM
strictly.
With this patch enabled, the pcpu_bitmap field of sos vm config is not needed
to configure;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
below fields are defined but not used.
- sync, pause_cnt & dbg_req_state.
Tracked-On: #861
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
-- fix "Macro parameter not in brackets" for PLUG_CPU(n)
-- fix "Array has no bounds specified" for vm_configs[]
Tracked-On: #861
Signed-off-by: Mingqiang Chi <mingqiang.chi@intel.com>
Now we do not need pending_pre_work anymore, as we can make sure IO request
VCPU resume from where it paused.
Now only three fixed points will try to do schedule:
- vcpu_thread: before vm entry, will check reschedule flag and to it if needed
- default_idle: loop check reschedule flag to see if need switch out
- io request: if IO REQ need DM's handle, it will schedule out
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
this patch added full context switch support for scheduling, it make sure
each VCPU has its own stack, and added host_sp field in struct sched_object
to record host stack pointer for each switch out object.
Arch related function arch_switch_to is added for context switch.
To benefit debugging, a name[] field is also added into struct sched_object.
Tracked-On: #2394
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
Acked-by: Xu, Anthony <anthony.xu@intel.com>
separate the private macro/structure/functions, which are just used
in instr_emul.c;
and move instr_emul.h to public include path.
Tracked-On: #1842
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
The member of lapic_pt in acrn_vm_config will be replaced by
guest_flag of LAPIC_PASSTHROUGH;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of bootargs in acrn_vm_config will be replaced by
acrn_vm_os_config struct.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The member of mem_size and start_hpa in acrn_vm_config struct will
be replaced with the acrn_vm_mem_config struct;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
For each vm_array[] item, its config is located in corresponding
index of vm_configs[], so vm_config pointer is not needed any more.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
All the legacy cpu configration in vm_description.c are all cleaned up;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
We will use guest_flags of SECURE_WORLD_ENABLED to check wthether
sworld is supported.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch creates a new get_sos_vm() api to replace get_vm_from_vmid(0U)
because VM 0 might not be SOS VM now;
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When pcpu enter guest mode, it will call launch_vms() function to launch
VMs in global vm_configs array.
In launch_vms() function, current pcpu will go through vm_config array list
and check whether it is a bsp of configured VM, if yes then it will prepare
corresponding VM and start it. The index of vm_config array will be specified
to VM id.
The first least significant bit in pcpu_bitmap means the bsp of the VM.
Tracked-On: #2291
Signed-off-by: Victor Sun <victor.sun@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
