Move dynamic sections and relocation sections data structures to
elf.h and enclose function relocate with CONFIG_RELOC. The input
parameter struct Elf64_Dyn *dynamic is not used by x86-64 now because
x86-64 can use pc-relative addressing to get the acutaly load address
of _DYNAMIC in the C code.
Tracked-On: #8825
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add BSP and AP initialization function.
and call uart16550_init to update uart_base_address
after init paging.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
riscv only need to map mmio and hv owned memory, donot
need to map guest memory. And need detection for svpbmt extension
to support page table defined memory attribute programming.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add functions get_board_hv_device_start/get_board_hv_device_size
to get mmio device start address and size. These are needed to be
generated by config tool or runtime parsing DTS, wrap the method
here.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
this patch calculate riscv static pages number for page pool.
riscv donot need to map guest memory. use link script address
label to map code size.
For risc-v:
1) if the platform doesn't support PCIe devices
The address space layout for risc-v is like
| |
| MMIO |
| |
| ... |
| |
| RAM |
| |
For all its address space, one 1GB page table is enough which cover 512G
For MMIO or RAM, if its start address and end address is 1G aligned, there's no 2M
or 4K page table is needed. if their address are not 1G aligned, two 2M page table
is enough for MMIO or RAM. The issue here is that if we neetid 4K page entries for
different page attributes. So we need to reserve enough 4K page tables for that requirement.
2) if the platform support PCI devices, for the low MMIO range, another two 2MB page
table may needed. for the high MMIO range, its depends on the max physical address bits of
the platform and the high MMIO range reserved by the BIOS.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Add hypervisor pagetable manipulate interface to riscv arch directory,
which is needed by the common interface, and add riscv ppt pgtable
structure implementation.
Tracked-On: #8831
Signed-off-by: Haicheng Li <haicheng.li@intel.com>
Co-developed-by: hangliu1 <hang1.liu@intel.com>
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add pgtable callbacks set_pgentry to implement arch specific
set generic page table entry for any paging level, and remove
x86 specific tweak_exe_right/recover_exe_right callbacks, move
the logic in set_pgentry callback.
remove common set_pgentry function to avoid confusing.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
move early_pgtable_map_uart and pgtable_create_trusty_root
to x86 code, and provide calling with x86 private header
pagemisc.h
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
this patch moves function xx_offset and xx_index to common code,
Add arch interface arch_quirk/arch_pgtle_page_vaddr and
arch_pgtle_large.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
move _page_table_level to common, and rename functions and
variables to comform with pgtln style
when we refer to pgtl0e, it means the lowest translation
table entry, while the "pte" refers generic page table entry.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add x86 mm_common.h to map common macro name to x86 name
and chang them in common/mmu.c, replace XX_PFN_MASK with
PFN_MASK, since they are the same.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
The sanitized page is used to mitigate l1tf for x86, but sanitized_page_hpa
is the hpa used to set in the page table entry when delete or modify
page happens, it is by default is 0, other arch donot need to init it.
move this part to common for other arch to reuse it.
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
move struct pgtable and page_pool to common code and
move alloc_page/free_page/init_page_pool to common
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Liu, Yifan1 <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
move some funcitons like hpa2hva to common file.
change some files to include file from asm/pgtable.h to common/pgtable.h
Tracked-On: #8831
Signed-off-by: hangliu1 <hang1.liu@intel.com>
Reviewed-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
For now, BOARD should use the qemu-riscv for risc-v.
For RISC-V:
make hypervisor BOARD=qemu-riscv SCENARIO=shared ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu-
For x86:
make hypervisor BOARD=qemu SCENARIO=shared [ARCH=x86]
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Only x86 has local APIC pass-thru. For release mode, the console_vmexit_callback
is empty, complier should optimize this unuseful check.
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Now doesn't want introduce the PCI module since PCI CFG access should be arch
special.
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
get_vm_from_vmid,is_paused_vm and is_poweroff_vm should be common APIs.
But now doesn't implement them as common for not introduce more VM related
data structure and APIs.
Tracked-On: #8805
Signed-off-by: Fei Li <fei1.li@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
send_single_ipi/send_dest_ipi_mask are calling sbi_send_ipi. According
to SBI spec:
- uint64_t hart_mask is a scalar bit-vector containing hartids
- uint64_t hart_mask_base is the starting hartid from which the
bit-vector must be computed
Logical pCPU ID and pCPU ID mask need to be converted to physical hart
ID mask and physical hart ID base.
Tracked-On: #8811
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
MMIO read/write without memory order should be common ARCH, without
PIO support shouldn't use PIO APIs, so implement them as empty.
Tracked-On: #8807
Signed-off-by: Fei Li <fei1.li@intel.com>
Signed-off-by: Haoyu Tang <haoyu.tang@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
init sched and call run_idle_thred in init_pcpu_comm_post to switch to idle
thread after AP initialization finish.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
implement arch_cpu_dead and arch_cpu_do_idle for riscv, arch_cpu_dead and
arch_cpu_do_idle will be called by common module.
Tracked-On: #8812
Signed-off-by: Haicheng Li <haicheng.li@outlook.com>
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
cpu_dead calls arch_cpu_dead, cpu_do_idle calls arch_cpu_do_idle,
arch_cpu_dead and arch_cpu_do_idle are required to be implemented by
each architecture.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
stack_frame is not only for vcpu thread, host thread needs
it, so move stack_frame out of vcpu file.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
delivery mode and idle mode are x86 specific percpu, so move it from common to
x86 arch, also change the name of mode_to_idle to be idle_mode, change the name
of mode_to_kick_pcpu to be kick_pcpu_mode.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
add arch_send_reschedule_request, which is called by make_reschedule_request, for X86
arch_send_reschedule_request will call kick_pcpu, arch_send_reschedule_request is arch
public API, which is needed to be implemented by each architecture.
Tracked-On: #8812
Signed-off-by: Xue Bosheng <bosheng.xue@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch calls timer_init() to initialize timer for
pcpu on risc-v platform.
Tracked-On: #8816
Signed-off-by: Yi Y Sun <yi.y.sun@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Convert IRQ-related macros to static inline functions and introduce
wrappers for arch-specific implementations. This follows the style we
defined for multi-arch development.
This is a follow-up update for commit
a7239d126 ("[FIXME] hv: risc-v add denpended implementation in cpu.h").
CPU_IRQ_ENABLE_ON_CONFIG -> local_irq_enable
CPU_IRQ_DISABLE_ON_CONFIG -> local_irq_disable
CPU_INT_ALL_DISABLE -> local_irq_save
CPU_INT_ALL_RESTORE -> local_irq_restore
Tracked-On: #8813
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
This patch implements interrupt initialization and the basic
exception/interrupt handling flow on RISC-V.
init_interrupt() needs to be invoked during CPU initialization to
set up the trap vector and enable the interrupt.
RISC-V exception and interrupt handling includes:
- Saving and restoring CPU registers around traps
- Implementing handlers for:
- Supervisor software interrupt
- Supervisor timer interrupt
- Halting the CPU for all other interrupts and exceptions
------
TODOs:
1. add support for registering interrupt handlers via request_irq() and
further adoption of the common IRQ framework.
2. add support for external interrupt.
Tracked-On: #8813
Signed-off-by: Haicheng Li <haicheng.li@intel.com>
Co-developed-by: Shiqing Gao <shiqing.gao@intel.com>
Signed-off-by: Shiqing Gao <shiqing.gao@intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Enable acrnlog (memory logging) in release builds, default log level
is still controlled by DEBUG_OPTIONS/MEM_LOGLEVEL in scenario file.
Tracked-On: #8805
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Yifan Liu <yifan1.liu@intel.com>
Without -fpie or -fno-pie specified in the CFLAGS and ASFLAGS, different
versions of riscv64-linux-gnu-gcc have different behavior, for example,
Ubuntu 13.3.0-6ubuntu2~24.04 will compile as if -fpie, but 15.1.0 will
compile as if -fno-pie. To make the build consistent specify -fpie when
CONFIG_RELOC=y and -fno-pie otherwize explicitly.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This patch adds the basic logics to bring up all APs in the C
entry of BSP boot. The mapping between logcial CPU IDs and physical
hart IDs is setup based on the pre-generated data from config tool
by parsing the device tree. Logical CPU ID BSP_CPU_ID will always
map to the BSP hart ID. The per pCPU logic ID is saved in tp register.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Extension Zihintpause (Pause hint) is mandatory for RVA23. asm_pause
is implemented based on "pause" instruction.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
Use tp register to hold the current logical CPU ID. This follows the
same design as x86 which uses MSR_IA32_SYSENTER_CS for the same purpose.
riscv uses SBI HSM to start the APs.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
This is just for temporary build and should be reverted when
common debug module is integrated.
Tracked-On: #8791
Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com>
Acked-by: Wang, Yu1 <yu1.wang@intel.com>
