The patch simplifies the way to merge the msr vmexit loading list with HV,
which was already merged to master.
Tracked-On: #2422
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
tool
The msr load/restore during vmexit/vmenty is enabled in HV by
default. The profiling has assumption that it's only user for this
feature, which could overwrite of HV default setting.
This fix combines the msr load list for vmexit when profiling.
Tracked-On: #2422
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
to edge interrupt, like eth device, it can triger the interrupt again
when its IRQ in softirq entry queue or in timer list.
in current design, for sofrirq entry, it calls "list_del" before
"list_add_tail", to avoid the entry added twice.
so for interrupt delay timer, add to check if it is started
then just drop the next one; to avoid it enqueue twice.
Tracked-On: #2365
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Reviewed-by: Li, Fei1 <fei1.li@intel.com>
The array index of 'vm_list' may be out of bound.
Updated size of profiling_vm_info_list
Bug: ACRN-2544
Tracked-On: #2385
Signed-off-by: Manisha Chinthapally <manisha.chinthapally@intel.com>
In write_trampoline_stack_sym(), when do relocation for pcpu's stack,
it wrongly adds an offset. As a result, during booting, when non-BSP
CPU (APs) tries to run trampoline code once they are waken up by BSP
via SIPI, system hangs.
Tracked-On: #2035
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
when relocation is enabled, the calcuation of HV size in init_paging
routine is not right. As a result, it doesn't enable NX bit for many
pages which don't belong to hypervisor text section.
Tracked-On: #2035
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
In init_paging(), when modify page table, it does a round up to 2M on
the starting address of HV memory. If the address is not 2M aligned,
memory overwrite occurs, or memory attribute(cache, u/s) may be not
right. Besides, trusty memory (uos_sworld_memory) in .bss section is 2M
aligned during compiling, after enabling HV memroy 2M alignment, when
relocation is enabled, EFI stub or other loaders just needs to find a
2M-aligned starting addr for HV memory.
Tracked-On: #2035
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
efi_ctx is passed by EFI stub to hypervisor. The memory was allocated
right after HV binary and marked as Efireserved. But HV is doing a 2MB
alignment in init_paging() and might overwrite the efi_ctx struct or
change the page table attribute. Now, EFI STUB uses Efiloaderdata type
memory and the memory can be re-use by hypervisor/sos after boot time
done. HV should save itself a copy if the content is still needed after
init_paging().
Tracked-On: #2035
Signed-off-by: Chaohong guo <chaohong.guo@intel.com>
This is to align the types used in hypervisor core and profiling.
That cleans up unnecessary type conversions. It also fixes inconsistent
tab/space in data structures.
Tracked-On: #2257
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
Profiling tools are broken, which cause page faults during collection.
The issue happens by enabling SMAP recently. Therefore,
stac() and clac() are used to allow access to buffers allocated
by guest.
Tracked-On: #2157
Signed-off-by: Min Lim <min.yeol.lim@intel.com>
IO completion polling will access vcpu and vm structs. If doing it in
idle thread, there might be some race issues between vm destroying and
idle thread. They are running on different cores.
Got suggestion from Fengwei, decouple the polling action from idle
thread and just do it in vcpu thread, then we can guarantee idle thread
in really idle status.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Now, need_reschedule will test_and_clear the bit NEED_RESCHEDULE in
schedule context, then call schedule. It is not a exact match with the
name.
This patch move the flag clearing into scheudle, and need_reschedule
just check and return.
Tracked-On: #1821
Signed-off-by: Shuo A Liu <shuo.a.liu@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
With kernel 4.19, it's possible that same irq vector assigned
to different devices on different cpu.
So when we update the tmr, we should update the value for cpu
which is irq target.
Tracked-On: #2212
Signed-off-by: Alek Du <alek.du@intel.com>
this function is not from libc but has the same name,
atoi() in libc is unbounded and not safe.
replace this function with 'strtol_deci()' in this case.
Tracked-On: #2187
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
- bugfix:the actual 'size' of memory region that
to be updated is incorrect.
- replace CONFIG_UEFI_STUB with DMAR_PARSE_ENABLED
when update memory pages for ACPI_RECLAIM region,
as DMAR_PARSE_ENABLED may be enabled on non-EFI
platform.
V2 update:
wrap roundup to 2M and rounddown to 2M inline
functions.
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
According to SDM Vol. 2A 3-191 & Vol. 2A 3-213, leaf 02h has no subleaf.
This patch removes the un-needed code.
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
acrntrace/log kernel modules will use this hypercall to fetch
pcpu num of hardware platform. Then, initialize driver accordingly.
Tracked-On: #1775;#1776
Signed-off-by: Kaige Fu <kaige.fu@intel.com>
Reviewed-by: Yan, Like <like.yan@intel.com>
Fixed three MISRA-C violations:
11S: No brackets to loop body
7C: Procedure has more than one exit point.
8D: DD data flow anomalies found.
initialize read_map and write_map in the declaration statements.
Fixed one bug:
Use "msr <= 0x1FFFU" instead of "msr < 0x1FFFU" because 0x1FFF is a valid MSR
bitmap address.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Now one macro is added to define the alignment requirement.
>#define __aligned(x) __attribute__((aligned(x)))
Some code uses the __aligned(x) to define the alignment while the other
code uses the original alignment definition.
So they are unified.
Tracked-On: projectacrn/acrn-hypervisor#2131
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
This patch fixes the MISRA-C violations on implicit type conversion.
For ptirq vpin source type, there is no need to define a enum.
Remove enum ptirq_vpin_source.
Define two macro:
- PTDEV_VPIN_IOAPIC
- PTDEV_VPIN_PIC
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
When adding ptirq entries, either successes with all number of entries added or
fails with none entries addes.
So remove added ptirq entries if error occurs during the process.
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This patch fixs the MISRA-C violations in arch/x86/assign.c
on multiple exits.
Tracked-On: #861
Signed-off-by: Binbin Wu <binbin.wu@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
now PCI uart changed from MMIO configure to BDF configure,
it need change this interface too; this interface is used
to dynamically configure debug uart by HV command line.
Tracked-On: #2031
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
before PCI_BDF uses its hex value like "0xC2" for "0:18.2" to
configure, now use "0:18.2" directly to make it more readable
and easier to configure.
Tracked-On: #2031
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
Use enhanced rep fast-string operation to refine memcpy_s.
And assume that the destination and the source would not overlap.
Tracked-On: #861
Signed-off-by: Li, Fei1 <fei1.li@intel.com>
For security, this patch add one flag per vm and disable snoop control
for sos and enable snoop control for uos by default.
v2: add one flag in vm, not in iommu domain.
v3: add vm null check
Tracked-On: #2086
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
We have used the option --ffreestanding to assert hypervisor
is a freestanding environment, and hypervisor does not include
standard library.
"-Wformat/-Wformat-security"
Check calls to the standard library functions printf and scanf, etc.,
to make sure that the arguments supplied have types appropriate to
the format string specified, and that the conversions specified in
the format string make sense. these flags disabled by -ffreestanding
or -fno-builtin.
Tracked-On: #1122
Signed-off-by: Tianhua Sun <tianhuax.s.sun@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
- 'buffer'with size of 'buffer_cnt', will overflow in
next loop if 'index == buffer_cnt - 1'.
Tracked-On: #1252
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
The bit mask for an out instruction is only applied to hv inout
handlers.
Apply the bit mask to dm inout handlers as well.
Tracked-On: #2075
Signed-off-by: Peter Fang <peter.fang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
By switching AP wakeup from broadcast to one by one, we could
set correct stack for each AP and drop the temp stack used during
AP boot.
Tracked-On: #2034
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
there is no need to clear CR4.TSD as there is no user mode
in ACRN hypervisor.
Tracked-On: #1842
Signed-off-by: Jason Chen CJ <jason.cj.chen@intel.com>
now UP2 board use ttyS1 as debug uart in HV, and vuart ttyS0 in
SOS kernel (acrn.conf default configure), its default IRQ is 4,
but SOS kernel will also assign IRQ4 to its ttyS1, they're sharing
one IRQ, and it can cause SOS boot hung issue, for HV not support
sharing IRQ now.
some boards use ttyS0 as debug uart, it has not this issue; for that
board, SOS will assign IRQ5 to its ttyS1, no sharing IRQ.
change it to IRQ6 to avoid the issue.
Tracked-On: #2030
Signed-off-by: Minggui Cao <minggui.cao@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
36D Prototype and definition name mismatch
pci_scan_bus() and sharing_mode_find_vdev() wrong parameter in prototype.
14D Attempt to change parameter passed by value.
vmsix_table_rw() uses function parameter as local viarable.
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
106D No prototype for non-static function.
2 functions missing prototyle declarations in header file.
120S Use of bit operator on signed type.
123S Use of underlying enum representation value.
enum values are treated like unsigned integer in vmsr.c
Tracked-On: #861
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
With SMAP enabled, hypervisor can't access pages that
owned by guest(either SOS or UOS), and an override is
is provided: stac()/clac() to enable/disable access to
guest's memory pages.
Pre-conditon:
Mark hypervisor owned pages as supervisor mode (U/S = 0),
and set all othter memory pages as user mode (U/S = 1).
Tracked-On: #2056
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Anthony Xu <anthony.xu@intel.com>
MTRR emulation belongs to virtual CPU component.
- rename mtrr.c to vmtrr.c and move it to arch/x86/guest
- rename mtrr.h to vmtrr.h and move it to include/arch/x86/guest
Tracked-On: #1842
Signed-off-by: Zide Chen <zide.chen@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
