Options for debugging the hypervisor. Build an image for release (``y``) or debug (``n``). In a **release** image, assertions are not enforced and debugging features are disabled, including logs, serial console, and the hypervisor shell. Specify the host serial device used for hypervisor debugging. This option is only valid if :option:`hv.DEBUG_OPTIONS.RELEASE` is set to ``n``. This option impacts the content of ``vm.(legacy_vuart id="0").base`` when :option:`vm.load_order` is ``SERVICE_VM``, which specifies the PIO base for Service VM legacy vUART 0 (used for the console). The PIO base for the Service VM's legacy vUART 0 is determined using these rules: - If :option:`hv.DEBUG_OPTIONS.SERIAL_CONSOLE` is any available ttyS# in the native environment, the PIO base of the Service VM legacy vUART 0 would be the same as the PIO base corresponding to :option:`hv.DEBUG_OPTIONS.SERIAL_CONSOLE` in the native environment. - Otherwise, a PIO base would be assigned to the Service VM legacy vUART 0 from the available PIO list. This logic is implemented in the configuration tools. Default loglevel for log messages stored in memory. Value can be changed at runtime. Default loglevel for the hypervisor North Peak (NPK) log. Value can be changed at runtime. Default loglevel for log messages written to the serial console. Options for enabling hypervisor features. Specify if hypervisor relocation is enabled on booting. The CPU scheduler used by the hypervisor. Specify if the ACRN hypervisor image can be booted using the multiboot2 protocol. If set to ``n``, GRUB's multiboot2 is not available as a boot option. Force to disable #AC for Split-locked Access. If CPU has #AC for split-locked access, HV enables it and VMs can't disable. Set this to enforce turning off that #AC, for debugging purposes only. Force to disable #GP for Split-locked Access. If CPU has #GP for UC lock, HV enable it and VMs can't disable. Set this to enforce turn off that #GP, for community developer only. Enable to do fixup for TPM2 and SMBIOS for Security VM. If no Security VM, setting this option to ``n`` If ``y``, permanently disables all interrupts in HV root mode. Enable the Intel Resource Director Technology (RDT) allocation feature and Code and Data Prioritization (CDP). If the board hardware does not support RDT or CDP, setting this option to ``y`` is ignored. Enable Hyper-V. Specify if the IOMMU enforces snoop behavior of DMA operations. Enable ACPI runtime parsing. Enable L1 cache flush before VM entry. Default value ``n``. Force disabling software workaround for Machine Check Error on Page Size Change. Enable Inter-VM Shared memory feature. Pseudo SRAM configuration. Capacity of one stack (in bytes) used by a physical core. Each core uses one stack for normal operation and another three for specific exceptions. The 2MB-aligned starting physical address of the RAM region used by the hypervisor. Capacity limits for static assigned data structure or maximum supported resource. Maximum number of User VMs allowed. Highest PCI bus ID used during IOMMU initialization. Maximum number of IOAPICs. Integer from 1 to 10. Maximum number of PCI devices. Integer from 1 to 1024. Maximum number of interrupt lines per IOAPIC. Integer from 1 to 120. The pre-defined number of interrupt sources of all pass-through devices. Pre-defined maximum number of virtual MSI-X table entries per device. If this value is empty, then the default value will be calculated from information in the board XML file. Integer value from 1 to 2048. Maximum number of emulated MMIO regions. Integer value from 1 to 128. Segment, Bus, Device, and function of the GPU. UEFI OS loader name. Specify the vUART connection setting. Refer to :ref:`vuart_config` for detailed vUART settings. Specify the VM type. Specify the load_order. Specify the VM name shown in the hypervisor console ``vm_list`` command. string from 1 to 32 characters long. Specify LAPIC to passthrough. Specify Polling mode for IO Completion. Specify nested virtualization support for KVM. Specify virtual CAT support for VM. Specify secure world support for trustry OS. Specify MTRR capability to hide for VM. Specify TPM2 FIXUP for VM. List of pCPU that this VM's vCPUs are pinned to. Class of Service for Cache Allocation Technology. Refer SDM 17.19.2 for details, and use with caution. Specify SGX Enclave Page Cache section base and size in byte. It must be page aligned. Specify memory information for Service and User VMs. Specify the VM vCPU priority for scheduling. Specify the companion VM id of this VM. General information for host kernel, boot argument and memory. Specify the console vUART (aka PCI based vUART) with the vUART ID by its ``id`` attribute. MMIO resources to passthrough. PCI devices number of the VM. pt intx mapping. PCI devices list. Enable and disable PTM(Precision Timing Measurement) feature. The hypervisor configuration defines a working scenario and target board by configuring the hypervisor image features and capabilities such as setting up the log and the serial port. VM configuration includes **scenario-based** VM configuration information that is used to describe the characteristics and attributes for all VMs in a user scenario. It also includes **launch script-based** VM configuration information, where parameters are passed to the device model to launch post-launched User VMs.