mirror of
https://github.com/projectacrn/acrn-hypervisor.git
synced 2025-04-30 04:33:58 +00:00
dd0fe54141
Did a partial run of ACRN documents through Acrolinx to catch additional spelling and grammar fixes missed during regular reviews. Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
35 lines
1.8 KiB
ReStructuredText
35 lines
1.8 KiB
ReStructuredText
.. _hv-parameters:
|
|
|
|
ACRN Hypervisor Parameters
|
|
##########################
|
|
|
|
Generic hypervisor parameters
|
|
*****************************
|
|
|
|
The ACRN hypervisor supports the following parameter:
|
|
|
|
+-----------------+-----------------------------+----------------------------------------------------------------------------------------+
|
|
| Parameter | Value | Description |
|
|
+=================+=============================+========================================================================================+
|
|
| | disabled | This disables the serial port completely. |
|
|
| +-----------------------------+----------------------------------------------------------------------------------------+
|
|
| ``uart=`` | bdf@<BDF value> | This sets the PCI serial port based on its BDF. e.g. ``bdf@0:18.1`` |
|
|
| +-----------------------------+----------------------------------------------------------------------------------------+
|
|
| | port@<port address> | This sets the serial port address. |
|
|
+-----------------+-----------------------------+----------------------------------------------------------------------------------------+
|
|
|
|
The Generic hypervisor parameters are specified in the GRUB multiboot/multiboot2 command.
|
|
For example:
|
|
|
|
.. code-block:: none
|
|
:emphasize-lines: 5
|
|
|
|
menuentry 'Boot ACRN hypervisor from multiboot' {
|
|
insmod part_gpt
|
|
insmod ext2
|
|
echo 'Loading ACRN hypervisor ...'
|
|
multiboot --quirk-modules-after-kernel /boot/acrn.32.out uart=bdf@0:18.1
|
|
module /boot/bzImage Linux_bzImage
|
|
module /boot/bzImage2 Linux_bzImage2
|
|
}
|