github/acrn-hypervisor
1
0
Fork 0
mirror of https://github.com/projectacrn/acrn-hypervisor.git synced 2025-05-01 05:03:55 +00:00
Code Issues Projects Releases Wiki Activity
release_0.1
acrn-hypervisor/hypervisor/include/arch/x86/cpu.h
Zide Chen 5cb9972919 hv: cleanup cpu.c and cpu.h 
- move all relocatoin code from cpu.c and cpu.h to reloc.c and reloc.h
- no any logic changes

Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Yin fengwei <fengwei.yin@intel.com>
2018-07-11 10:25:16 +08:00

460 lines
16 KiB
C
Raw Permalink Blame History

/*-
* Copyright (c) 1989, 1990 William F. Jolitz
* Copyright (c) 1990 The Regents of the University of California.
* Copyright (c) 2017 Intel Corporation
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)segments.h 7.1 (Berkeley) 5/9/91
* $FreeBSD$
*/
#ifndef CPU_H
#define CPU_H
/* Define page size */
#define CPU_PAGE_SHIFT 12
#define CPU_PAGE_SIZE 0x1000U
#define CPU_PAGE_MASK 0xFFFFFFFFFFFFF000UL
#define MMU_PTE_PAGE_SHIFT CPU_PAGE_SHIFT
#define MMU_PDE_PAGE_SHIFT 21
/* Define CPU stack alignment */
#define CPU_STACK_ALIGN 16UL
/* CR0 register definitions */
#define CR0_PG (1U<<31) /* paging enable */
#define CR0_CD (1U<<30) /* cache disable */
#define CR0_NW (1U<<29) /* not write through */
#define CR0_AM (1U<<18) /* alignment mask */
#define CR0_WP (1U<<16) /* write protect */
#define CR0_NE (1U<<5) /* numeric error */
#define CR0_ET (1U<<4) /* extension type */
#define CR0_TS (1U<<3) /* task switched */
#define CR0_EM (1U<<2) /* emulation */
#define CR0_MP (1U<<1) /* monitor coprocessor */
#define CR0_PE (1U<<0) /* protected mode enabled */
/* CR3 register definitions */
#define CR3_PWT (1U<<3) /* page-level write through */
#define CR3_PCD (1U<<4) /* page-level cache disable */
/* CR4 register definitions */
#define CR4_VME (1UL<<0) /* virtual 8086 mode extensions */
#define CR4_PVI (1UL<<1) /* protected mode virtual interrupts */
#define CR4_TSD (1UL<<2) /* time stamp disable */
#define CR4_DE (1UL<<3) /* debugging extensions */
#define CR4_PSE (1UL<<4) /* page size extensions */
#define CR4_PAE (1UL<<5) /* physical address extensions */
#define CR4_MCE (1UL<<6) /* machine check enable */
#define CR4_PGE (1UL<<7) /* page global enable */
#define CR4_PCE (1UL<<8)
/* performance monitoring counter enable */
#define CR4_OSFXSR (1UL<<9) /* OS support for FXSAVE/FXRSTOR */
#define CR4_OSXMMEXCPT (1UL<<10)
/* OS support for unmasked SIMD floating point exceptions */
#define CR4_VMXE (1UL<<13) /* VMX enable */
#define CR4_SMXE (1UL<<14) /* SMX enable */
#define CR4_PCIDE (1UL<<17) /* PCID enable */
#define CR4_OSXSAVE (1UL<<18)
#define CR4_SMEP (1UL<<20)
#define CR4_SMAP (1UL<<21)
/* XSAVE and Processor Extended States enable bit */
/*
* Entries in the Interrupt Descriptor Table (IDT)
*/
#define IDT_DE 0U /* #DE: Divide Error */
#define IDT_DB 1U /* #DB: Debug */
#define IDT_NMI 2U /* Nonmaskable External Interrupt */
#define IDT_BP 3U /* #BP: Breakpoint */
#define IDT_OF 4U /* #OF: Overflow */
#define IDT_BR 5U /* #BR: Bound Range Exceeded */
#define IDT_UD 6U /* #UD: Undefined/Invalid Opcode */
#define IDT_NM 7U /* #NM: No Math Coprocessor */
#define IDT_DF 8U /* #DF: Double Fault */
#define IDT_FPUGP 9U /* Coprocessor Segment Overrun */
#define IDT_TS 10U /* #TS: Invalid TSS */
#define IDT_NP 11U /* #NP: Segment Not Present */
#define IDT_SS 12U /* #SS: Stack Segment Fault */
#define IDT_GP 13U /* #GP: General Protection Fault */
#define IDT_PF 14U /* #PF: Page Fault */
#define IDT_MF 16U /* #MF: FPU Floating-Point Error */
#define IDT_AC 17U /* #AC: Alignment Check */
#define IDT_MC 18U /* #MC: Machine Check */
#define IDT_XF 19U /* #XF: SIMD Floating-Point Exception */
#define IDT_VE 20U /* #VE: Virtualization Exception */
/*Bits in EFER special registers */
#define EFER_LMA 0x00000400U /* Long mode active (R) */
/* CPU clock frequencies (FSB) */
#define CPU_FSB_83KHZ 83200
#define CPU_FSB_100KHZ 99840
#define CPU_FSB_133KHZ 133200
#define CPU_FSB_166KHZ 166400
/* Time conversions */
#define CPU_GHZ_TO_HZ 1000000000
#define CPU_GHZ_TO_KHZ 1000000
#define CPU_GHZ_TO_MHZ 1000
#define CPU_MHZ_TO_HZ 1000000
#define CPU_MHZ_TO_KHZ 1000
/* Boot CPU ID */
#define BOOT_CPU_ID 0U
/* hypervisor stack bottom magic('intl') */
#define SP_BOTTOM_MAGIC 0x696e746cUL
/* type of speculation control
* 0 - no speculation control support
* 1 - raw IBRS + IPBP support
* 2 - with STIBP optimization support
*/
#define IBRS_NONE 0
#define IBRS_RAW 1
#define IBRS_OPT 2
#ifndef ASSEMBLER
/**********************************/
/* EXTERNAL VARIABLES */
/**********************************/
extern uint8_t _ld_bss_start[];
extern uint8_t _ld_bss_end[];
/* In trampoline range, hold the jump target which trampline will jump to */
extern uint64_t main_entry[1];
extern int ibrs_type;
extern spinlock_t trampoline_spinlock;
/*
* To support per_cpu access, we use a special struct "per_cpu_region" to hold
* the pattern of per CPU data. And we allocate memory for per CPU data
* according to multiple this struct size and pcpu number.
*
* +-------------------+------------------+---+------------------+
* | percpu for pcpu0 | percpu for pcpu1 |...| percpu for pcpuX |
* +-------------------+------------------+---+------------------+
* ^ ^
* | |
* <per_cpu_region size>
*
* To access per cpu data, we use:
* per_cpu_base_ptr + sizeof(struct per_cpu_region) * curr_pcpu_id
* + offset_of_member_per_cpu_region
* to locate the per cpu data.
*/
#define PER_CPU_DATA_OFFSET(sym_addr) \
((uint64_t)(sym_addr) - (uint64_t)(_ld_cpu_data_start))
#define PER_CPU_DATA_SIZE \
((uint64_t)_ld_cpu_data_end - (uint64_t)(_ld_cpu_data_start))
/* CPUID feature words */
#define FEAT_1_ECX 0U /* CPUID[1].ECX */
#define FEAT_1_EDX 1U /* CPUID[1].EDX */
#define FEAT_7_0_EBX 2U /* CPUID[EAX=7,ECX=0].EBX */
#define FEAT_7_0_ECX 3U /* CPUID[EAX=7,ECX=0].ECX */
#define FEAT_7_0_EDX 4U /* CPUID[EAX=7,ECX=0].EDX */
#define FEAT_8000_0001_ECX 5U /* CPUID[8000_0001].ECX */
#define FEAT_8000_0001_EDX 6U /* CPUID[8000_0001].EDX */
#define FEAT_8000_0008_EBX 7U /* CPUID[8000_0008].EAX */
#define FEATURE_WORDS 8U
/**
*The invalid cpu_id (INVALID_CPU_ID) is error
*code for error handling, this means that
*caller can't find a valid physical cpu
*or virtual cpu.
*/
#define INVALID_CPU_ID 0xffffU
/**
*The broadcast id (BROADCAST_CPU_ID)
*used to notify all valid phyiscal cpu
*or virtual cpu.
*/
#define BROADCAST_CPU_ID 0xfffeU
/* CPU states defined */
enum cpu_state {
CPU_STATE_RESET = 0,
CPU_STATE_INITIALIZING,
CPU_STATE_RUNNING,
CPU_STATE_HALTED,
CPU_STATE_DEAD,
};
struct cpu_state_info {
uint8_t px_cnt; /* count of all Px states */
const struct cpu_px_data *px_data;
uint8_t cx_cnt; /* count of all Cx entries */
const struct cpu_cx_data *cx_data;
};
struct cpuinfo_x86 {
uint8_t family, model;
uint8_t virt_bits;
uint8_t phys_bits;
uint32_t cpuid_level;
uint32_t extended_cpuid_level;
uint64_t physical_address_mask;
uint32_t cpuid_leaves[FEATURE_WORDS];
char model_name[64];
struct cpu_state_info state_info;
};
#ifdef STACK_PROTECTOR
struct stack_canary {
/* Gcc generates extra code, using [fs:40] to access canary */
uint8_t reserved[40];
uint64_t canary;
};
#endif
extern struct cpuinfo_x86 boot_cpu_data;
#define MAX_PSTATE 20U /* max num of supported Px count */
#define MAX_CSTATE 8U /* max num of supported Cx count */
/* We support MAX_CSTATE num of Cx, means have (MAX_CSTATE - 1) Cx entries,
* i.e. supported Cx entry index range from 1 to MAX_CX_ENTRY.
*/
#define MAX_CX_ENTRY (MAX_CSTATE - 1U)
/* Function prototypes */
void cpu_dead(uint16_t pcpu_id);
void trampoline_start16(void);
int32_t hv_main(uint16_t cpu_id);
bool is_vapic_supported(void);
bool is_vapic_intr_delivery_supported(void);
bool is_vapic_virt_reg_supported(void);
bool cpu_has_cap(uint32_t bit);
void load_cpu_state_data(void);
void start_cpus();
void stop_cpus();
/* Read control register */
#define CPU_CR_READ(cr, result_ptr) \
{ \
asm volatile ("mov %%" __CPP_STRING(cr) ", %0" \
: "=r"(*result_ptr)); \
}
/* Write control register */
#define CPU_CR_WRITE(cr, value) \
{ \
asm volatile ("mov %0, %%" __CPP_STRING(cr) \
: /* No output */ \
: "r"(value)); \
}
/* Read MSR */
#define CPU_MSR_READ(reg, msr_val_ptr) \
{ \
uint32_t msrl, msrh; \
asm volatile (" rdmsr ":"=a"(msrl), \
"=d"(msrh) : "c" (reg)); \
*msr_val_ptr = ((uint64_t)msrh<<32) | msrl; \
}
/* Write MSR */
#define CPU_MSR_WRITE(reg, msr_val) \
{ \
uint32_t msrl, msrh; \
msrl = (uint32_t)msr_val; \
msrh = (uint32_t)(msr_val >> 32); \
asm volatile (" wrmsr " : : "c" (reg), \
"a" (msrl), "d" (msrh)); \
}
/* Disables interrupts on the current CPU */
#define CPU_IRQ_DISABLE() \
{ \
asm volatile ("cli\n" : : : "cc"); \
}
/* Enables interrupts on the current CPU */
#define CPU_IRQ_ENABLE() \
{ \
asm volatile ("sti\n" : : : "cc"); \
}
/* This macro writes the stack pointer. */
#define CPU_SP_WRITE(stack_ptr) \
{ \
uint64_t rsp = (uint64_t)stack_ptr & ~(CPU_STACK_ALIGN - 1UL); \
asm volatile ("movq %0, %%rsp" : : "r"(rsp)); \
}
/* Synchronizes all read accesses from memory */
#define CPU_MEMORY_READ_BARRIER() \
{ \
asm volatile ("lfence\n" : : : "memory"); \
}
/* Synchronizes all write accesses to memory */
#define CPU_MEMORY_WRITE_BARRIER() \
{ \
asm volatile ("sfence\n" : : : "memory"); \
}
/* Synchronizes all read and write accesses to/from memory */
#define CPU_MEMORY_BARRIER() \
{ \
asm volatile ("mfence\n" : : : "memory"); \
}
/* Write the task register */
#define CPU_LTR_EXECUTE(ltr_ptr) \
{ \
asm volatile ("ltr %%ax\n" : : "a"(ltr_ptr)); \
}
/* Read time-stamp counter / processor ID */
#define CPU_RDTSCP_EXECUTE(timestamp_ptr, cpu_id_ptr) \
{ \
uint32_t tsl, tsh; \
asm volatile ("rdtscp":"=a"(tsl), "=d"(tsh), \
"=c"(*cpu_id_ptr)); \
*timestamp_ptr = ((uint64_t)tsh << 32) | tsl; \
}
/* Define variable(s) required to save / restore architecture interrupt state.
* These variable(s) are used in conjunction with the ESAL_AR_INT_ALL_DISABLE()
* and ESAL_AR_INT_ALL_RESTORE() macros to hold any data that must be preserved
* in order to allow these macros to function correctly.
*/
#define CPU_INT_CONTROL_VARS uint64_t cpu_int_value
/* Macro to save rflags register */
#define CPU_RFLAGS_SAVE(rflags_ptr) \
{ \
asm volatile (" pushf"); \
asm volatile (" pop %0" \
: "=r" (*(rflags_ptr)) \
: /* No inputs */); \
}
/* Macro to restore rflags register */
#define CPU_RFLAGS_RESTORE(rflags) \
{ \
asm volatile (" push %0\n\t" \
"popf \n\t": : "r" (rflags) \
:"cc"); \
}
/* This macro locks out interrupts and saves the current architecture status
* register / state register to the specified address. This function does not
* attempt to mask any bits in the return register value and can be used as a
* quick method to guard a critical section.
* NOTE: This macro is used in conjunction with CPU_INT_ALL_RESTORE
* defined below and CPU_INT_CONTROL_VARS defined above.
*/
#define CPU_INT_ALL_DISABLE() \
{ \
CPU_RFLAGS_SAVE(&cpu_int_value); \
CPU_IRQ_DISABLE(); \
}
/* This macro restores the architecture status / state register used to lockout
* interrupts to the value provided. The intent of this function is to be a
* fast mechanism to restore the interrupt level at the end of a critical
* section to its original level.
* NOTE: This macro is used in conjunction with CPU_INT_ALL_DISABLE
* and CPU_INT_CONTROL_VARS defined above.
*/
#define CPU_INT_ALL_RESTORE() \
{ \
CPU_RFLAGS_RESTORE(cpu_int_value); \
}
/* Macro to get CPU ID */
static inline uint16_t get_cpu_id(void)
{
uint32_t tsl, tsh, cpu_id;
asm volatile ("rdtscp":"=a" (tsl), "=d"(tsh), "=c"(cpu_id)::);
return (uint16_t)cpu_id;
}
static inline uint64_t cpu_rsp_get(void)
{
uint64_t ret;
asm volatile("movq %%rsp, %0"
: "=r"(ret));
return ret;
}
static inline uint64_t cpu_rbp_get(void)
{
uint64_t ret;
asm volatile("movq %%rbp, %0"
: "=r"(ret));
return ret;
}
static inline uint64_t
msr_read(uint32_t reg_num)
{
uint64_t msr_val;
CPU_MSR_READ(reg_num, &msr_val);
return msr_val;
}
static inline void
msr_write(uint32_t reg_num, uint64_t value64)
{
CPU_MSR_WRITE(reg_num, value64);
}
static inline void
write_xcr(int reg, uint64_t val)
{
uint32_t low, high;
low = (uint32_t)val;
high = (uint32_t)(val >> 32);
asm volatile("xsetbv" : : "c" (reg), "a" (low), "d" (high));
}
#else /* ASSEMBLER defined */
#endif /* ASSEMBLER defined */
#endif /* CPU_H */
Reference in New Issue View Git Blame Copy Permalink