acrn-hypervisor/devicemodel/hw/pci/lpc.c
Yuan Liu 1f54b92170 lpc: resolve UOS boot-up issue caused by lpc.
The lpc dm causes that UOS can't boot if the parameters are set incorrectly,
it is not friendly to users.

This patch optimizes the lpc error handle flow. UOS always can boot successfully
whatever the lpc settings are.

Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Yu Wang <yu1.wang@intel.com>
2018-07-10 11:52:52 +08:00

491 lines
11 KiB
C

/*-
* Copyright (c) 2013 Neel Natu <neel@freebsd.org>
* Copyright (c) 2013 Tycho Nightingale <tycho.nightingale@pluribusnetworks.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdbool.h>
#include <sys/errno.h>
#include "vmmapi.h"
#include "acpi.h"
#include "inout.h"
#include "pci_core.h"
#include "irq.h"
#include "lpc.h"
#include "uart_core.h"
#define IO_ICU1 0x20
#define IO_ICU2 0xA0
SET_DECLARE(lpc_dsdt_set, struct lpc_dsdt);
SET_DECLARE(lpc_sysres_set, struct lpc_sysres);
#define ELCR_PORT 0x4d0
SYSRES_IO(ELCR_PORT, 2);
#define IO_TIMER1_PORT 0x40
#define NMISC_PORT 0x61
SYSRES_IO(NMISC_PORT, 1);
static struct pci_vdev *lpc_bridge;
#define LPC_UART_NUM 2
static struct lpc_uart_vdev {
struct uart_vdev *uart;
const char *opts;
int iobase;
int irq;
int enabled;
} lpc_uart_vdev[LPC_UART_NUM];
static const char *lpc_uart_names[LPC_UART_NUM] = { "COM1", "COM2" };
/*
* LPC device configuration is in the following form:
* <lpc_device_name>[,<options>]
* For e.g. "com1,stdio"
*/
int
lpc_device_parse(const char *opts)
{
int unit, error;
char *str, *cpy, *lpcdev;
error = -1;
str = cpy = strdup(opts);
lpcdev = strsep(&str, ",");
if (lpcdev != NULL) {
for (unit = 0; unit < LPC_UART_NUM; unit++) {
if (strcasecmp(lpcdev, lpc_uart_names[unit]) == 0) {
lpc_uart_vdev[unit].opts = str;
error = 0;
goto done;
}
}
}
done:
if (error)
free(cpy);
return error;
}
static void
lpc_uart_intr_assert(void *arg)
{
struct lpc_uart_vdev *lpc_uart = arg;
assert(lpc_uart->irq >= 0);
if (lpc_bridge)
vm_isa_pulse_irq(lpc_bridge->vmctx,
lpc_uart->irq,
lpc_uart->irq);
}
static void
lpc_uart_intr_deassert(void *arg)
{
/*
* The COM devices on the LPC bus generate edge triggered interrupts,
* so nothing more to do here.
*/
}
static int
lpc_uart_io_handler(struct vmctx *ctx, int vcpu, int in, int port, int bytes,
uint32_t *eax, void *arg)
{
int offset;
struct lpc_uart_vdev *lpc_uart = arg;
offset = port - lpc_uart->iobase;
switch (bytes) {
case 1:
if (in)
*eax = uart_read(lpc_uart->uart, offset);
else
uart_write(lpc_uart->uart, offset, *eax);
break;
case 2:
if (in) {
*eax = uart_read(lpc_uart->uart, offset);
*eax |= uart_read(lpc_uart->uart, offset + 1) << 8;
} else {
uart_write(lpc_uart->uart, offset, *eax);
uart_write(lpc_uart->uart, offset + 1, *eax >> 8);
}
break;
default:
return -1;
}
return 0;
}
static void
lpc_deinit(struct vmctx *ctx)
{
struct lpc_uart_vdev *lpc_uart;
struct inout_port iop;
const char *name;
int unit;
/* COM1 and COM2 */
for (unit = 0; unit < LPC_UART_NUM; unit++) {
name = lpc_uart_names[unit];
lpc_uart = &lpc_uart_vdev[unit];
if (lpc_uart->enabled == 0)
continue;
bzero(&iop, sizeof(struct inout_port));
iop.name = name;
iop.port = lpc_uart->iobase;
iop.size = UART_IO_BAR_SIZE;
iop.flags = IOPORT_F_INOUT;
unregister_inout(&iop);
uart_release_backend(lpc_uart->uart, lpc_uart->opts);
uart_deinit(lpc_uart->uart);
uart_legacy_dealloc(unit);
lpc_uart->uart = NULL;
lpc_uart->enabled = 0;
}
}
static int
lpc_init(struct vmctx *ctx)
{
struct lpc_uart_vdev *lpc_uart;
struct inout_port iop;
const char *name;
int unit, error;
/* COM1 and COM2 */
for (unit = 0; unit < LPC_UART_NUM; unit++) {
lpc_uart = &lpc_uart_vdev[unit];
name = lpc_uart_names[unit];
if (uart_legacy_alloc(unit,
&lpc_uart->iobase,
&lpc_uart->irq) != 0) {
fprintf(stderr, "Unable to allocate resources for "
"LPC device %s\n", name);
goto init_failed;
}
pci_irq_reserve(lpc_uart->irq);
lpc_uart->uart = uart_init(lpc_uart_intr_assert,
lpc_uart_intr_deassert, lpc_uart);
if (lpc_uart->uart < 0) {
uart_legacy_dealloc(unit);
goto init_failed;
}
error = uart_set_backend(lpc_uart->uart, lpc_uart->opts);
/*
* Continue to initialize LPC UART device if opts is invalid,
* and the data will be dropped by uart_write in UART DM.
*/
if (error && error != -EINVAL) {
fprintf(stderr, "Unable to initialize backend '%s' "
"for LPC device %s\n", lpc_uart->opts, name);
uart_deinit(lpc_uart->uart);
uart_legacy_dealloc(unit);
goto init_failed;
}
bzero(&iop, sizeof(struct inout_port));
iop.name = name;
iop.port = lpc_uart->iobase;
iop.size = UART_IO_BAR_SIZE;
iop.flags = IOPORT_F_INOUT;
iop.handler = lpc_uart_io_handler;
iop.arg = lpc_uart;
error = register_inout(&iop);
assert(error == 0);
lpc_uart->enabled = 1;
}
return 0;
init_failed:
lpc_deinit(ctx);
return -1;
}
static void
pci_lpc_write_dsdt(struct pci_vdev *dev)
{
struct lpc_dsdt **ldpp, *ldp;
dsdt_line("");
dsdt_line("Device (ISA)");
dsdt_line("{");
dsdt_line(" Name (_ADR, 0x%04X%04X)", dev->slot, dev->func);
dsdt_line(" OperationRegion (LPCR, PCI_Config, 0x00, 0x100)");
dsdt_line(" Field (LPCR, AnyAcc, NoLock, Preserve)");
dsdt_line(" {");
dsdt_line(" Offset (0x60),");
dsdt_line(" PIRA, 8,");
dsdt_line(" PIRB, 8,");
dsdt_line(" PIRC, 8,");
dsdt_line(" PIRD, 8,");
dsdt_line(" Offset (0x68),");
dsdt_line(" PIRE, 8,");
dsdt_line(" PIRF, 8,");
dsdt_line(" PIRG, 8,");
dsdt_line(" PIRH, 8");
dsdt_line(" }");
dsdt_line("");
dsdt_indent(1);
SET_FOREACH(ldpp, lpc_dsdt_set) {
ldp = *ldpp;
ldp->handler();
}
dsdt_line("");
dsdt_line("Device (PIC)");
dsdt_line("{");
dsdt_line(" Name (_HID, EisaId (\"PNP0000\"))");
dsdt_line(" Name (_CRS, ResourceTemplate ()");
dsdt_line(" {");
dsdt_indent(2);
dsdt_fixed_ioport(IO_ICU1, 2);
dsdt_fixed_ioport(IO_ICU2, 2);
dsdt_fixed_irq(2);
dsdt_unindent(2);
dsdt_line(" })");
dsdt_line("}");
dsdt_line("");
dsdt_line("Device (TIMR)");
dsdt_line("{");
dsdt_line(" Name (_HID, EisaId (\"PNP0100\"))");
dsdt_line(" Name (_CRS, ResourceTemplate ()");
dsdt_line(" {");
dsdt_indent(2);
dsdt_fixed_ioport(IO_TIMER1_PORT, 4);
dsdt_fixed_irq(0);
dsdt_unindent(2);
dsdt_line(" })");
dsdt_line("}");
dsdt_unindent(1);
dsdt_line("}");
}
static void
pci_lpc_sysres_dsdt(void)
{
struct lpc_sysres **lspp, *lsp;
dsdt_line("");
dsdt_line("Device (SIO)");
dsdt_line("{");
dsdt_line(" Name (_HID, EisaId (\"PNP0C02\"))");
dsdt_line(" Name (_CRS, ResourceTemplate ()");
dsdt_line(" {");
dsdt_indent(2);
SET_FOREACH(lspp, lpc_sysres_set) {
lsp = *lspp;
switch (lsp->type) {
case LPC_SYSRES_IO:
dsdt_fixed_ioport(lsp->base, lsp->length);
break;
case LPC_SYSRES_MEM:
dsdt_fixed_mem32(lsp->base, lsp->length);
break;
}
}
dsdt_unindent(2);
dsdt_line(" })");
dsdt_line("}");
}
LPC_DSDT(pci_lpc_sysres_dsdt);
static void
pci_lpc_uart_dsdt(void)
{
struct lpc_uart_vdev *lpc_uart;
int unit;
for (unit = 0; unit < LPC_UART_NUM; unit++) {
lpc_uart = &lpc_uart_vdev[unit];
if (!lpc_uart->enabled)
continue;
dsdt_line("");
dsdt_line("Device (%s)", lpc_uart_names[unit]);
dsdt_line("{");
dsdt_line(" Name (_HID, EisaId (\"PNP0501\"))");
dsdt_line(" Name (_UID, %d)", unit + 1);
dsdt_line(" Name (_CRS, ResourceTemplate ()");
dsdt_line(" {");
dsdt_indent(2);
dsdt_fixed_ioport(lpc_uart->iobase, UART_IO_BAR_SIZE);
dsdt_fixed_irq(lpc_uart->irq);
dsdt_unindent(2);
dsdt_line(" })");
dsdt_line("}");
}
}
LPC_DSDT(pci_lpc_uart_dsdt);
static int
pci_lpc_cfgwrite(struct vmctx *ctx, int vcpu, struct pci_vdev *pi,
int coff, int bytes, uint32_t val)
{
int pirq_pin;
if (bytes == 1) {
pirq_pin = 0;
if (coff >= 0x60 && coff <= 0x63)
pirq_pin = coff - 0x60 + 1;
if (coff >= 0x68 && coff <= 0x6b)
pirq_pin = coff - 0x68 + 5;
if (pirq_pin != 0) {
pirq_write(ctx, pirq_pin, val);
pci_set_cfgdata8(pi, coff, pirq_read(pirq_pin));
return 0;
}
}
return -1;
}
static void
pci_lpc_write(struct vmctx *ctx, int vcpu, struct pci_vdev *pi,
int baridx, uint64_t offset, int size, uint64_t value)
{
}
static uint64_t
pci_lpc_read(struct vmctx *ctx, int vcpu, struct pci_vdev *pi,
int baridx, uint64_t offset, int size)
{
return 0;
}
#define LPC_DEV 0x7000
#define LPC_VENDOR 0x8086
static int
pci_lpc_init(struct vmctx *ctx, struct pci_vdev *pi, char *opts)
{
/*
* Do not allow more than one LPC bridge to be configured.
*/
if (lpc_bridge != NULL) {
fprintf(stderr, "Only one LPC bridge is allowed.\n");
return -1;
}
/*
* Enforce that the LPC can only be configured on bus 0. This
* simplifies the ACPI DSDT because it can provide a decode for
* all legacy i/o ports behind bus 0.
*/
if (pi->bus != 0) {
fprintf(stderr, "LPC bridge can be present only on bus 0.\n");
return -1;
}
if (lpc_init(ctx) != 0)
return -1;
/* initialize config space */
pci_set_cfgdata16(pi, PCIR_DEVICE, LPC_DEV);
pci_set_cfgdata16(pi, PCIR_VENDOR, LPC_VENDOR);
pci_set_cfgdata8(pi, PCIR_CLASS, PCIC_BRIDGE);
pci_set_cfgdata8(pi, PCIR_SUBCLASS, PCIS_BRIDGE_ISA);
lpc_bridge = pi;
return 0;
}
static void
pci_lpc_deinit(struct vmctx *ctx, struct pci_vdev *pi, char *opts)
{
lpc_bridge = NULL;
lpc_deinit(ctx);
}
char *
lpc_pirq_name(int pin)
{
char *name = NULL;
if (lpc_bridge == NULL)
return NULL;
if (asprintf(&name, "\\_SB.PCI0.ISA.LNK%c,", 'A' + pin - 1) < 0) {
if (name != NULL)
free(name);
return NULL;
}
return name;
}
void
lpc_pirq_routed(void)
{
int pin;
if (lpc_bridge == NULL)
return;
for (pin = 0; pin < 4; pin++)
pci_set_cfgdata8(lpc_bridge, 0x60 + pin, pirq_read(pin + 1));
for (pin = 0; pin < 4; pin++)
pci_set_cfgdata8(lpc_bridge, 0x68 + pin, pirq_read(pin + 5));
}
struct pci_vdev_ops pci_ops_lpc = {
.class_name = "lpc",
.vdev_init = pci_lpc_init,
.vdev_deinit = pci_lpc_deinit,
.vdev_write_dsdt = pci_lpc_write_dsdt,
.vdev_cfgwrite = pci_lpc_cfgwrite,
.vdev_barwrite = pci_lpc_write,
.vdev_barread = pci_lpc_read
};
DEFINE_PCI_DEVTYPE(pci_ops_lpc);