mirror of
https://github.com/projectacrn/acrn-hypervisor.git
synced 2025-06-02 20:35:32 +00:00
70e1e8d154
Add introduction about how to enable hybrid mode scenario. Signed-off-by: lirui34 <ruix.li@intel.com>
102 lines
3.8 KiB
ReStructuredText
102 lines
3.8 KiB
ReStructuredText
.. _using_hybrid_mode_on_nuc:
|
||
|
||
Using Hybrid mode on NUC
|
||
########################
|
||
ACRN hypervisor supports hybrid scenario that the User VM
|
||
(such as Zephyr or Clear Linux) could run in a pre-launched VM
|
||
or in a post-launched VM which launched by Device model in Service VM.
|
||
The following guidelines shows how to set up the ACRN hypervisor hybrid
|
||
scenario on Intel NUC. The hybrid scenario on Intel NUC is shown in
|
||
:numref:`hybrid_scenario_on_nuc`.
|
||
|
||
.. figure:: images/hybrid_scenario_on_nuc.png
|
||
:align: center
|
||
:width: 400px
|
||
:name: hybrid_scenario_on_nuc
|
||
|
||
The HYBRID scenario on Intel NUC
|
||
|
||
Prerequisites
|
||
*************
|
||
- `Intel NUC Kit NUC7i7DNHE
|
||
<https://www.intel.com/content/www/us/en/products/boards-kits/nuc/kits/nuc7i7dnhe.html>`_
|
||
- Connecting to the serial port, described in :ref:`Connecting to the serial port
|
||
<connect_serial_port>`
|
||
- Install Grub on SATA or NVME disk of NUC
|
||
|
||
Update Ubuntu GRUB to Boot hypervisor and Load Kernel Image
|
||
***********************************************************
|
||
#. Append the following configuration to the ``/etc/grub.d/40_custom`` file:
|
||
|
||
.. code-block:: bash
|
||
:emphasize-lines: 18,20
|
||
|
||
menuentry 'ACRN hypervisor Hybird Scenario' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-e23c76ae-b06d-4a6e-ad42-46b8eedfd7d3' {
|
||
|
||
recordfail
|
||
|
||
load_video
|
||
|
||
gfxmode $linux_gfx_mode
|
||
|
||
insmod gzio
|
||
|
||
insmod part_gpt
|
||
|
||
insmod ext2
|
||
|
||
echo 'Loading hypervisor Hybrid scenario ...'
|
||
|
||
multiboot --quirk-modules-after-kernel /boot/acrn.32.out
|
||
|
||
module /boot/zephyr.bin XXXXXX
|
||
|
||
module /boot/bzImage yyyyyy
|
||
|
||
}
|
||
|
||
.. note:: The module ``/boot/zephyr.bin`` is VM0(Zephyr) kernel file,
|
||
param ``xxxxxx`` is VM0’s kernel file tag and must exactly match the ``kernel_mod_tag``
|
||
of VM0 which configured in file ``hypervisor/scenarios/hybrid/vm_configurations.c``.
|
||
The multiboot module ``/boot/bzImage`` is Service VM kernel file, param ``yyyyyy``
|
||
is the bzImage tag and must exactly match the ``kernel_mod_tag`` of VM1 in file
|
||
``hypervisor/scenarios/hybrid/vm_configurations.c``.
|
||
The kernel command line arguments used to boot the Service VM is located in header file
|
||
``hypervisor/scenarios/hybrid/vm_configurations.h`` and configured by `SOS_VM_BOOTARGS` MACRO.
|
||
|
||
#. Modify the ``/etc/default/grub`` file as follows to make the GRUB menu
|
||
visible when booting:
|
||
|
||
.. code-block:: bash
|
||
|
||
# GRUB_HIDDEN_TIMEOUT=0
|
||
GRUB_HIDDEN_TIMEOUT_QUIET=false
|
||
|
||
#. Update grub::
|
||
|
||
$ sudo update-grub
|
||
|
||
#. Reboot the NUC. Select the **ACRN hypervisor Hybrid Scenario** entry to boot
|
||
the ACRN hypervisor on the NUC’s display. The GRUB loader will boot the
|
||
hypervisor, and the hypervisor will start VMs automatically.
|
||
|
||
Hybrid Scenario Startup Checking
|
||
********************************
|
||
#. Use these steps to verify the hypervisor is properly running:
|
||
|
||
a. Login ACRN hypervisor shell from serial console.
|
||
#. Use the vm_list check pre-launched VM and Service VM are launched successfully.
|
||
|
||
#. Use these steps to verify all VMs are running properly:
|
||
|
||
a. Use the ``vm_console 0`` to switch to VM0(Zephyr)’s console, it will show
|
||
a string of **Hello world! acrn**.
|
||
#. Use a :kbd:`Ctrl+Spacebar` to return to the ACRN hypervisor shell.
|
||
#. Use the ``vm_console 1`` to switch to VM1(Service VM)’s console.
|
||
#. The VM1’s Service VM could boot up and login in.
|
||
#. SSH to VM1 and Launch post-launched VM2 by ACRN device model launch script.
|
||
#. Back to Service VM console, use a :kbd:`Ctrl+Spacebar` to return to the ACRN hypervisor shell.
|
||
#. Use the ``vm_console 2`` to switch to VM2(User VM)’s console.
|
||
#. The VM2 could boot up and login in.
|
||
|
||
Refer to the :ref:`acrnshell` user guide for more information about available commands. |