acrn-hypervisor/hypervisor/lib/crypto/mbedtls/md.h
Geoffroy Van Cutsem 8b16be9185 Remove "All rights reserved" string headers
Many of the license and Intel copyright headers include the "All rights
reserved" string. It is not relevant in the context of the BSD-3-Clause
license that the code is released under. This patch removes those strings
throughout the code (hypervisor, devicemodel and misc).

Tracked-On: #7254
Signed-off-by: Geoffroy Van Cutsem <geoffroy.vancutsem@intel.com>
2022-04-06 13:21:02 +08:00

224 lines
8.3 KiB
C

/**
* \file md.h
*
* \brief This file contains the generic message-digest wrapper.
*
* \author Adriaan de Jong <dejong@fox-it.com>
*/
/*
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
* Copyright (C) 2018, Intel Corporation.
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_MD_H
#define MBEDTLS_MD_H
#include <rtl.h>
#include "sha256.h"
#define MBEDTLS_ERR_MD_BAD_INPUT_DATA -0x5100 /**< Bad input parameters to function. */
#define mbedtls_platform_zeroize(buf, len) memset((buf), 0U, (len))
/**
* \brief Supported message digests.
*
*/
typedef enum {
MBEDTLS_MD_NONE = 0, /**< None. */
MBEDTLS_MD_SHA256, /**< The SHA-256 message digest. */
} mbedtls_md_type_t;
#define MBEDTLS_MD_MAX_SIZE 32 /* longest known is SHA256 or less */
/**
* Opaque struct defined in md_internal.h.
*/
typedef struct mbedtls_md_info mbedtls_md_info_t;
/**
* The generic message-digest context.
*/
typedef struct {
/** Information about the associated message digest. */
const mbedtls_md_info_t *md_info;
/** The digest-specific context. */
uint8_t md_ctx[sizeof(mbedtls_sha256_context)];
/** The HMAC part of the context. Use array here to avoid dynamic memory
* allocation. The hardcode value 128 is 2 times of block_size which
* is 64 in md_wrap.c
*/
uint8_t hmac_ctx[128];
} mbedtls_md_context_t;
/**
* \brief This function returns the message-digest information
* associated with the given digest type.
*
* \param md_type The type of digest to search for.
*
* \return The message-digest information associated with \p md_type.
* \return NULL if the associated message-digest information is not found.
*/
const mbedtls_md_info_t *mbedtls_md_info_from_type(mbedtls_md_type_t md_type);
/**
* \brief This function initializes a message-digest context without
* binding it to a particular message-digest algorithm.
*
* This function should always be called first. It prepares the
* context for mbedtls_md_setup() for binding it to a
* message-digest algorithm.
*/
void mbedtls_md_init(mbedtls_md_context_t *ctx);
/**
* \brief This function clears the internal structure of \p ctx and
* frees any embedded internal structure, but does not free
* \p ctx itself.
*
* If you have called mbedtls_md_setup() on \p ctx, you must
* call mbedtls_md_free() when you are no longer using the
* context.
* Calling this function if you have previously
* called mbedtls_md_init() and nothing else is optional.
* You must not call this function if you have not called
* mbedtls_md_init().
*/
void mbedtls_md_free(mbedtls_md_context_t *ctx);
/**
* \brief This function selects the message digest algorithm to use,
* and allocates internal structures.
*
* It should be called after mbedtls_md_init() or
* mbedtls_md_free(). Makes it necessary to call
* mbedtls_md_free() later.
*
* \param ctx The context to set up.
* \param md_info The information structure of the message-digest algorithm
* to use.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification
* failure.
* \return #MBEDTLS_ERR_MD_ALLOC_FAILED on memory-allocation failure.
*/
int32_t mbedtls_md_setup(mbedtls_md_context_t *ctx, const mbedtls_md_info_t *md_info);
/**
* \brief This function extracts the message-digest size from the
* message-digest information structure.
*
* \param md_info The information structure of the message-digest algorithm
* to use.
*
* \return The size of the message-digest output in Bytes.
*/
uint8_t mbedtls_md_get_size(const mbedtls_md_info_t *md_info);
/**
* \brief This function sets the HMAC key and prepares to
* authenticate a new message.
*
* Call this function after mbedtls_md_setup(), to use
* the MD context for an HMAC calculation, then call
* mbedtls_md_hmac_update() to provide the input data, and
* mbedtls_md_hmac_finish() to get the HMAC value.
*
* \param ctx The message digest context containing an embedded HMAC
* context.
* \param key The HMAC secret key.
* \param keylen The length of the HMAC key in Bytes.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification
* failure.
*/
int32_t mbedtls_md_hmac_starts(mbedtls_md_context_t *ctx, const uint8_t *key, size_t keylen);
/**
* \brief This function feeds an input buffer into an ongoing HMAC
* computation.
*
* Call mbedtls_md_hmac_starts() or mbedtls_md_hmac_reset()
* before calling this function.
* You may call this function multiple times to pass the
* input piecewise.
* Afterwards, call mbedtls_md_hmac_finish().
*
* \param ctx The message digest context containing an embedded HMAC
* context.
* \param input The buffer holding the input data.
* \param ilen The length of the input data.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification
* failure.
*/
int32_t mbedtls_md_hmac_update(mbedtls_md_context_t *ctx, const uint8_t *input, size_t ilen);
/**
* \brief This function finishes the HMAC operation, and writes
* the result to the output buffer.
*
* Call this function after mbedtls_md_hmac_starts() and
* mbedtls_md_hmac_update() to get the HMAC value. Afterwards
* you may either call mbedtls_md_free() to clear the context,
* or call mbedtls_md_hmac_reset() to reuse the context with
* the same HMAC key.
*
* \param ctx The message digest context containing an embedded HMAC
* context.
* \param output The generic HMAC checksum result.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification
* failure.
*/
int32_t mbedtls_md_hmac_finish(mbedtls_md_context_t *ctx, uint8_t *output);
/**
* \brief This function calculates the full generic HMAC
* on the input buffer with the provided key.
*
* The function allocates the context, performs the
* calculation, and frees the context.
*
* The HMAC result is calculated as
* output = generic HMAC(hmac key, input buffer).
*
* \param md_info The information structure of the message-digest algorithm
* to use.
* \param key The HMAC secret key.
* \param keylen The length of the HMAC secret key in Bytes.
* \param input The buffer holding the input data.
* \param ilen The length of the input data.
* \param output The generic HMAC result.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification
* failure.
*/
int32_t mbedtls_md_hmac(const mbedtls_md_info_t *md_info, const uint8_t *key, size_t keylen,
const uint8_t *input, size_t ilen, uint8_t *output);
#endif /* MBEDTLS_MD_H */