mirror of
https://github.com/projectacrn/acrn-hypervisor.git
synced 2025-10-02 06:47:06 +00:00
e5777adf5e
Customer might have specific folder where stores their own configurations for their customized scenario/board, so add TARGET_DIR parameter to support option that build hyprvisor with specified configurations. So valid usages are: (target = all | hypervisor) 1. make <target> 2. make <target> KCONFIG_FILE=xxx [TARGET_DIR=xxx] 3. make <target> BOARD=xxx SCENARIO=xxx [TARGET_DIR=xxx] 4. make <target> BOARD_FILE=xxx SCENARIO_FILE=xxx [TARGET_DIR=xxx] 5. make <target> KCONFIG_FILE=xxx BOARD_FILE=xxx SCENARIO_FILE=xxx [TARGET_DIR=xxx] If TARGET_DIR parameter is not specified in make command, hypervisor will be built with board configurations under hypervisor/arch/x86/configs/ and scenario configurations under hypervisor/scenarios/. Moreover, the configurations would be overwritten if BOARD/SCENARIO files are specified in make command. If TARGET_DIR parameter is specified in make command, hypervisor will be built with configuration under that folder if no BOARD/SCENARIO files are specified. When BOARD/SCENARIO files are available in make command, the TARGET_DIR is used to store configurations that BOARD/SCENARIO file provided, i.e. Configurations in TARGET_DIR folder will be overwritten. Tracked-On: #4517 Signed-off-by: Victor Sun <victor.sun@intel.com>
114 lines
4.0 KiB
Makefile
114 lines
4.0 KiB
Makefile
# usage: override_config <symbol> <default>
|
|
#
|
|
# Given a configuration symbol (without the CONFIG_ prefix), this macro
|
|
# overrides its value as follows.
|
|
# 1. If a value is specified from command line, that value is used.
|
|
# 2. If neither config.mk nor the command line specifies a value, the given
|
|
# default is used.
|
|
define override_config =
|
|
ifdef $(1)
|
|
CONFIG_$(1) := $($(1))
|
|
else ifndef CONFIG_$(1)
|
|
CONFIG_$(1) := $(2)
|
|
endif
|
|
endef
|
|
|
|
HV_CONFIG := .config
|
|
HV_DEFCONFIG := defconfig
|
|
HV_CONFIG_H := include/config.h
|
|
HV_CONFIG_MK := include/config.mk
|
|
|
|
KCONFIG_DIR := $(BASEDIR)/../misc/acrn-config/kconfig
|
|
|
|
# Backward-compatibility for RELEASE=(0|1)
|
|
ifdef RELEASE
|
|
ifeq ($(RELEASE),1)
|
|
override RELEASE := y
|
|
else
|
|
override RELEASE := n
|
|
endif
|
|
endif
|
|
|
|
-include $(HV_OBJDIR)/$(HV_CONFIG_MK)
|
|
ifeq ($(shell [ $(HV_OBJDIR)/$(HV_CONFIG) -nt $(HV_OBJDIR)/$(HV_CONFIG_MK) ] && echo 1),1)
|
|
# config.mk may be outdated if .config has been overwritten. To update config.mk
|
|
# in such cases, we include .config again to get the new configurations. This
|
|
# only happens when GNU make checks the prerequisites.
|
|
-include $(HV_OBJDIR)/$(HV_CONFIG)
|
|
endif
|
|
|
|
$(eval $(call override_config,BOARD,apl-mrb))
|
|
$(eval $(call override_config,RELEASE,n))
|
|
|
|
ifdef BOARD
|
|
TARGET_BOARD=$(BOARD)
|
|
else
|
|
TARGET_BOARD=$(CONFIG_BOARD)
|
|
endif
|
|
|
|
$(eval $(call check_dep_exec,python3,KCONFIG_DEPS))
|
|
$(eval $(call check_dep_py3lib,kconfiglib,KCONFIG_DEPS))
|
|
|
|
# This target invoke silentoldconfig to generate or update a .config. Useful as
|
|
# a prerequisite of other targets depending on .config.
|
|
#
|
|
# A dummy command is necessary to trigger the remaking of config.mk right after
|
|
# oldconfig changes HV_CONFIG in the same execution of make.
|
|
$(HV_OBJDIR)/$(HV_CONFIG): update_config oldconfig
|
|
@true
|
|
|
|
# Note: This target must not depend on a phony target (e.g. oldconfig) because
|
|
# it'll trigger endless re-execution of make.
|
|
$(HV_OBJDIR)/$(HV_CONFIG_MK): $(HV_OBJDIR)/$(HV_CONFIG)
|
|
@mkdir -p $(dir $@)
|
|
@sed 's/="\(.*\)"$$/=\1/g' $(HV_OBJDIR)/$(HV_CONFIG) > $@
|
|
|
|
$(HV_OBJDIR)/$(HV_CONFIG_H): $(HV_OBJDIR)/$(HV_CONFIG)
|
|
@mkdir -p $(dir $@)
|
|
@python3 $(KCONFIG_DIR)/generate_header.py Kconfig $< $@
|
|
|
|
# This target forcefully generate a .config based on a given default
|
|
# one. Overwrite the current .config if it exists.
|
|
.PHONY: defconfig
|
|
defconfig: $(KCONFIG_DEPS)
|
|
@mkdir -p $(HV_OBJDIR)
|
|
@if [ ! -f $(KCONFIG_FILE) ] && [ "$(CONFIG_XML_ENABLED)" != "true" ]; then \
|
|
BOARD=$(TARGET_BOARD) python3 $(KCONFIG_DIR)/defconfig.py Kconfig $(HV_OBJDIR)/$(HV_CONFIG); \
|
|
else \
|
|
if [ "$(KCONFIG_FILE)" != "" ] && [ -f $(KCONFIG_FILE) ]; then \
|
|
echo "Writing $(HV_OBJDIR)/$(HV_CONFIG) with $(KCONFIG_FILE)"; \
|
|
cp $(KCONFIG_FILE) $(HV_OBJDIR)/$(HV_CONFIG); \
|
|
elif [ "$(CONFIG_XML_ENABLED)" = "true" ] && [ "$(TARGET_DIR)" != "" ] && [ -d $(TARGET_DIR) ]; then \
|
|
echo "Writing $(HV_OBJDIR)/$(HV_CONFIG) with $(TARGET_DIR)/$(BOARD).config"; \
|
|
cp $(TARGET_DIR)/$(BOARD).config $(HV_OBJDIR)/$(HV_CONFIG); \
|
|
fi; \
|
|
python3 $(KCONFIG_DIR)/silentoldconfig.py Kconfig $(HV_OBJDIR)/$(HV_CONFIG) RELEASE=$(RELEASE); \
|
|
fi
|
|
|
|
# Use silentoldconfig to forcefully update the current .config, or generate a
|
|
# new one if no previous .config exists. This target can be used as a
|
|
# prerequisite of all the others to make sure that the .config is consistent
|
|
# even it has been modified manually before.
|
|
.PHONY: oldconfig
|
|
oldconfig: $(KCONFIG_DEPS)
|
|
@mkdir -p $(HV_OBJDIR)
|
|
@BOARD=$(TARGET_BOARD) \
|
|
python3 $(KCONFIG_DIR)/silentoldconfig.py Kconfig \
|
|
$(HV_OBJDIR)/$(HV_CONFIG) \
|
|
RELEASE=$(RELEASE)
|
|
|
|
# Minimize the current .config. This target can be used to generate a defconfig
|
|
# for future use.
|
|
.PHONY: savedefconfig
|
|
savedefconfig: $(HV_OBJDIR)/$(HV_CONFIG)
|
|
@python3 $(KCONFIG_DIR)/savedefconfig.py Kconfig \
|
|
$(HV_OBJDIR)/$(HV_CONFIG) \
|
|
$(HV_OBJDIR)/$(HV_DEFCONFIG)
|
|
|
|
$(eval $(call check_dep_exec,menuconfig,MENUCONFIG_DEPS))
|
|
export KCONFIG_CONFIG := $(HV_OBJDIR)/$(HV_CONFIG)
|
|
menuconfig: $(MENUCONFIG_DEPS) defconfig
|
|
@python3 $(shell which menuconfig) Kconfig
|
|
|
|
CFLAGS += -include $(HV_OBJDIR)/$(HV_CONFIG_H)
|