acrn-hypervisor/hypervisor/arch/x86/rtcm.c
Yonghua Huang e9870893a3 hv: rename some software SRAM local names
For simplification purpose, use 'ssram' instead of
 'software sram' for local names inside rtcm module.

Tracked-On: #6015
Signed-off-by: Yonghua Huang <yonghua.huang@intel.com>
Acked-by: Eddie Dong <eddie.dong@intel.com>
2021-05-16 10:08:17 +08:00

180 lines
5.4 KiB
C

/*
* Copyright (C) 2020 Intel Corporation. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <types.h>
#include <asm/lib/bits.h>
#include <rtl.h>
#include <logmsg.h>
#include <misc_cfg.h>
#include <asm/mmu.h>
#include <asm/cpu_caps.h>
#include <asm/rtcm.h>
static uint64_t ssram_bottom_hpa;
static uint64_t ssram_top_hpa;
/* is_sw_sram_initialized is used to tell whether Software SRAM is successfully initialized for all cores */
static volatile bool is_sw_sram_initialized = false;
#ifdef CONFIG_SSRAM_ENABLED
static struct rtct_entry_data_rtcm_binary *rtcm_binary = NULL;
static struct acpi_table_header *acpi_rtct_tbl = NULL;
static inline void *get_rtct_entry_base()
{
return (void *)acpi_rtct_tbl + sizeof(*acpi_rtct_tbl);
}
void set_rtct_tbl(void *rtct_tbl_addr)
{
acpi_rtct_tbl = rtct_tbl_addr;
}
/*
*@pre the SSRAM region is separate and never mixed with normal DRAM
*@pre acpi_rtct_tbl != NULL
*/
static void parse_rtct(void)
{
uint64_t bottom_hpa = ULONG_MAX;
struct rtct_entry *entry;
struct rtct_entry_data_ssram *ssram;
entry = get_rtct_entry_base();
while (((uint64_t)entry - (uint64_t)acpi_rtct_tbl) < acpi_rtct_tbl->length) {
switch (entry->type) {
case RTCT_ENTRY_TYPE_RTCM_BINARY:
rtcm_binary = (struct rtct_entry_data_rtcm_binary *)entry->data;
ASSERT((rtcm_binary->address != 0UL && rtcm_binary->size != 0U), "Invalid PTCM binary.");
pr_info("found RTCM bin, in HPA %llx, size %llx", rtcm_binary->address, rtcm_binary->size);
break;
case RTCT_ENTRY_TYPE_SOFTWARE_SRAM:
ssram = (struct rtct_entry_data_ssram *)entry->data;
if (ssram_top_hpa < ssram->base + ssram->size) {
ssram_top_hpa = ssram->base + ssram->size;
}
if (bottom_hpa > ssram->base) {
bottom_hpa = ssram->base;
}
pr_info("found L%d Software SRAM, at HPA %llx, size %x", ssram->cache_level,
ssram->base, ssram->size);
break;
/* In current phase, we ignore other entries like gt_clos and wrc_close */
default:
break;
}
/* point to next rtct entry */
entry = (struct rtct_entry *)((uint64_t)entry + entry->size);
}
if (bottom_hpa != ULONG_MAX) {
/* Software SRAM regions are detected. */
ssram_bottom_hpa = bottom_hpa;
ssram_top_hpa = round_page_up(ssram_top_hpa);
}
}
/*
* Function to initialize Software SRAM. Both BSP and APs shall call this function to
* make sure Software SRAM is initialized, which is required by RTCM.
* BSP:
* To parse RTCT and find the entry of RTCM command function
* AP:
* Wait until BSP has done the parsing work, then call the RTCM ABI.
*
* Synchronization of AP and BSP is ensured, both inside and outside RTCM.
* BSP shall be the last to finish the call.
*/
bool init_software_sram(bool is_bsp)
{
bool ret = true;
int32_t rtcm_ret_code;
struct rtcm_header *header;
rtcm_abi_func rtcm_command_func = NULL;
static uint64_t init_sw_sram_cpus_mask = (1UL << BSP_CPU_ID);
/*
* When we shut down an RTVM, its pCPUs will be re-initialized
* we must ensure init_software_sram() will only be executed at the first time when a pcpu is booted
* That's why we add "!is_sw_sram_initialized" as an condition.
*/
if (!is_sw_sram_initialized && (acpi_rtct_tbl != NULL)) {
/* TODO: We may use SMP call to flush TLB and do Software SRAM initialization on APs */
if (is_bsp) {
parse_rtct();
if (rtcm_binary != NULL) {
/* Clear the NX bit of PTCM area */
set_paging_x((uint64_t)hpa2hva(rtcm_binary->address), rtcm_binary->size);
}
bitmap_clear_lock(get_pcpu_id(), &init_sw_sram_cpus_mask);
}
wait_sync_change(&init_sw_sram_cpus_mask, 0UL);
if (rtcm_binary != NULL) {
header = hpa2hva(rtcm_binary->address);
pr_info("rtcm_bin_address:%llx, rtcm magic:%x, rtcm version:%x",
rtcm_binary->address, header->magic, header->version);
ASSERT(header->magic == RTCM_MAGIC, "Incorrect RTCM magic!");
/* Flush the TLB, so that BSP/AP can execute the RTCM ABI */
flush_tlb_range((uint64_t)hpa2hva(rtcm_binary->address), rtcm_binary->size);
rtcm_command_func = (rtcm_abi_func)(hpa2hva(rtcm_binary->address) + header->command_offset);
pr_info("rtcm command function is found at %llx", rtcm_command_func);
rtcm_ret_code = rtcm_command_func(RTCM_CMD_INIT_SOFTWARE_SRAM, get_rtct_entry_base());
pr_info("rtcm initialization return %d", rtcm_ret_code);
/* return 0 for success, -1 for failure */
ASSERT(rtcm_ret_code == 0);
if (is_bsp) {
/* Restore the NX bit of RTCM area in page table */
set_paging_nx((uint64_t)hpa2hva(rtcm_binary->address), rtcm_binary->size);
}
bitmap_set_lock(get_pcpu_id(), &init_sw_sram_cpus_mask);
wait_sync_change(&init_sw_sram_cpus_mask, ALL_CPUS_MASK);
/* Flush the TLB on BSP and all APs to restore the NX for Software SRAM area */
flush_tlb_range((uint64_t)hpa2hva(rtcm_binary->address), rtcm_binary->size);
if (is_bsp) {
is_sw_sram_initialized = true;
pr_info("BSP Software SRAM has been initialized, base_hpa:0x%lx, top_hpa:0x%lx.\n",
ssram_bottom_hpa, ssram_top_hpa);
}
ret = disable_host_monitor_wait();
}
}
return ret;
}
#else
void set_rtct_tbl(__unused void *rtct_tbl_addr)
{
}
bool init_software_sram(__unused bool is_bsp)
{
return true;
}
#endif
/* @pre called after 'init_software_sram()' done. */
bool is_software_sram_enabled(void)
{
return is_sw_sram_initialized;
}
uint64_t get_software_sram_base(void)
{
return ssram_bottom_hpa;
}
uint64_t get_software_sram_size(void)
{
return (ssram_top_hpa - ssram_bottom_hpa);
}