Files
acrn-hypervisor/misc/efi-stub/Makefile
Yin Fengwei adf3a59302 Makefile: Refine Makefile to generate both industry and sdc images
We are trying to add both industry and sdc images to CL build. To
maintain the build interface unchanged (no change from CL side), we
extend the build command to generate the different target images.

To identity different images, we use rule:
   $(HV_FILE).$(BOARD).$(FIRMWARE).$(SCENARIO)
as target image file name.

Tracked-On: #3593
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
2019-09-02 19:25:31 +08:00

133 lines
5.0 KiB
Makefile

#
# Copyright (c) 2011, Intel Corporation
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of Intel Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
HV_OBJDIR:=build
HV_FILE:=acrn
C_SRCS = boot.c pe.c malloc.c
ACRN_OBJS := $(patsubst %.c,$(EFI_OBJDIR)/%.o,$(C_SRCS))
INCLUDE_PATH += $(HV_OBJDIR)/include
OBJCOPY=objcopy
HOST = $(shell $(CC) -dumpmachine | sed "s/\(-\).*$$//")
ARCH := $(shell $(CC) -dumpmachine | sed "s/\(-\).*$$//")
ifeq ($(ARCH),x86_64)
FORMAT=efi-app-x86-64
else
ARCH=ia32
FORMAT=efi-app-ia32
endif
# Different Linux distributions have the 'gnu-efi' package install
# its tools and libraries in different folders. The next couple of
# variables will determine and set the right path for both the
# tools $(GNUEFI_DIR) and libraries $(LIBDIR)
GNUEFI_DIR := $(shell find $(SYSROOT)/usr/lib* -name elf_$(ARCH)_efi.lds -type f | xargs dirname)
LIBDIR := $(subst gnuefi,,$(GNUEFI_DIR))
CRT0 := $(GNUEFI_DIR)/crt0-efi-$(ARCH).o
LDSCRIPT := $(GNUEFI_DIR)/elf_$(ARCH)_efi.lds
INCDIR := $(SYSROOT)/usr/include
CFLAGS=-I. -I.. -I../../hypervisor/include/arch/x86/guest -I$(INCDIR)/efi -I$(INCDIR)/efi/$(ARCH) \
-I../../hypervisor/include/public -I../../hypervisor/include/lib -I../../hypervisor/boot/include/guest \
-DEFI_FUNCTION_WRAPPER -fPIC -fshort-wchar -ffreestanding \
-Wall -I../fs/ -D$(ARCH) -O2 -I../../hypervisor/include/arch/x86 \
-include config.h
CFLAGS += -mno-mmx -mno-sse -mno-sse2 -mno-80387 -mno-fp-ret-in-387
ifeq ($(ARCH),ia32)
ifeq ($(HOST),x86_64)
CFLAGS += -m32
endif
endif
ifeq ($(ARCH),x86_64)
CFLAGS += -mno-red-zone
endif
LDFLAGS=-T $(LDSCRIPT) -Bsymbolic -shared -nostdlib -znocombreloc \
-L$(LIBDIR) $(CRT0)
EFIBIN=$(HV_OBJDIR)/$(HV_FILE).efi
BOOT=$(EFI_OBJDIR)/boot.efi
CONF_FILE=$(CURDIR)/clearlinux/acrn.conf
all: $(EFIBIN)
$(OBJCOPY) --add-section .hv="$(HV_OBJDIR)/$(HV_FILE).bin" --change-section-vma .hv=0x6e000 --set-section-flags .hv=alloc,data,contents,load --section-alignment 0x1000 $(EFI_OBJDIR)/boot.efi $(EFIBIN)
install: $(EFIBIN) install-conf
install -D $(EFIBIN) $(DESTDIR)/usr/lib/acrn/$(HV_FILE).$(BOARD).$(SCENARIO).efi
# this is to keep the compatible with original output files
ifeq ($(BOARD), apl-nuc)
ifeq ($(SCENARIO), sdc)
install -D $(EFIBIN) $(DESTDIR)/usr/lib/acrn/$(HV_FILE).efi
endif
endif
install-debug: $(HV_OBJDIR)/$(HV_FILE).map $(HV_OBJDIR)/$(HV_FILE).out
install -D $(HV_OBJDIR)/$(HV_FILE).out $(DESTDIR)/usr/lib/acrn/$(HV_FILE).$(BOARD).$(SCENARIO).efi.out
install -D $(HV_OBJDIR)/$(HV_FILE).map $(DESTDIR)/usr/lib/acrn/$(HV_FILE).$(BOARD).$(SCENARIO).efi.map
# this is to keep the compatible with original output files
ifeq ($(BOARD), apl-nuc)
ifeq ($(SCENARIO), sdc)
install -D $(HV_OBJDIR)/$(HV_FILE).out $(DESTDIR)/usr/lib/acrn/$(HV_FILE).efi.out
install -D $(HV_OBJDIR)/$(HV_FILE).map $(DESTDIR)/usr/lib/acrn/$(HV_FILE).efi.map
endif
endif
$(EFIBIN): $(BOOT)
$(EFI_OBJDIR)/boot.efi: $(EFI_OBJDIR)/boot.so
$(EFI_OBJDIR)/boot.so: $(ACRN_OBJS) $(FS)
$(LD) $(LDFLAGS) -o $@ $^ -lgnuefi -lefi $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
install-conf: $(CONF_FILE)
install -D --mode=0644 $^ $(DESTDIR)/usr/share/acrn/samples/nuc/acrn.conf
clean:
rm -f $(BOOT) $(HV_OBJDIR)/$(HV_FILE).efi $(EFI_OBJDIR)/boot.so $(ACRN_OBJS) $(FS)
$(EFI_OBJDIR)/%.o:%.S $(HV_OBJDIR)/$(HV_CONFIG_H)
[ ! -e $@ ] && mkdir -p $(dir $@); \
$(CC) $(CFLAGS) -c -o $@ $<
$(EFI_OBJDIR)/%.o: %.c $(HV_OBJDIR)/$(HV_CONFIG_H)
[ ! -e $@ ] && mkdir -p $(dir $@); \
$(CC) $(patsubst %, -I%, $(INCLUDE_PATH)) -I. -c $(CFLAGS) $(ARCH_CFLAGS) $< -o $@
%.efi: %.so
$(OBJCOPY) -j .text -j .sdata -j .data -j .dynamic -j .dynsym -j .rel \
-j .rela -j .reloc --target=$(FORMAT) $*.so $@