falco/rules/falco_rules.yaml

#
# Copyright (C) 2016-2018 Draios Inc dba Sysdig.
#
# This file is part of falco.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# See xxx for details on falco engine and rules versioning. Currently,
# this specific rules file is compatible with engine version 0
# (e.g. falco releases <= 0.13.1), so we'll keep the
# required_engine_version lines commented out, so maintain
# compatibility with older falco releases. With the first incompatible
# change to this rules file, we'll uncomment this line and set it to
# the falco engine version in use at the time.
#
#- required_engine_version: 2

# Currently disabled as read/write are ignored syscalls. The nearly
# similar open_write/open_read check for files being opened for
# reading/writing.
# - macro: write
#   condition: (syscall.type=write and fd.type in (file, directory))
# - macro: read
#   condition: (syscall.type=read and evt.dir=> and fd.type in (file, directory))

- macro: open_write
  condition: (evt.type=open or evt.type=openat) and evt.is_open_write=true and fd.typechar='f' and fd.num>=0

- macro: open_read
  condition: (evt.type=open or evt.type=openat) and evt.is_open_read=true and fd.typechar='f' and fd.num>=0

- macro: never_true
  condition: (evt.num=0)

- macro: always_true
  condition: (evt.num=>0)

# In some cases, such as dropped system call events, information about
# the process name may be missing. For some rules that really depend
# on the identity of the process performing an action such as opening
# a file, etc., we require that the process name be known.
- macro: proc_name_exists
  condition: (proc.name!="<NA>")

- macro: rename
  condition: evt.type in (rename, renameat)
- macro: mkdir
  condition: evt.type = mkdir
- macro: remove
  condition: evt.type in (rmdir, unlink, unlinkat)

- macro: modify
  condition: rename or remove

- macro: spawned_process
  condition: evt.type = execve and evt.dir=<

# File categories
- macro: bin_dir
  condition: fd.directory in (/bin, /sbin, /usr/bin, /usr/sbin)

- macro: bin_dir_mkdir
  condition: >
    (evt.arg[1] startswith /bin/ or
     evt.arg[1] startswith /sbin/ or
     evt.arg[1] startswith /usr/bin/ or
     evt.arg[1] startswith /usr/sbin/)

- macro: bin_dir_rename
  condition: >
    evt.arg[1] startswith /bin/ or
    evt.arg[1] startswith /sbin/ or
    evt.arg[1] startswith /usr/bin/ or
    evt.arg[1] startswith /usr/sbin/

- macro: etc_dir
  condition: fd.name startswith /etc/

# This detects writes immediately below / or any write anywhere below /root
- macro: root_dir
  condition: ((fd.directory=/ or fd.name startswith /root) and fd.name contains "/")

- list: shell_binaries
  items: [bash, csh, ksh, sh, tcsh, zsh, dash]

- list: shell_mgmt_binaries
  items: [add-shell, remove-shell]

- macro: shell_procs
  condition: (proc.name in (shell_binaries))

- list: coreutils_binaries
  items: [
    truncate, sha1sum, numfmt, fmt, fold, uniq, cut, who,
    groups, csplit, sort, expand, printf, printenv, unlink, tee, chcon, stat,
    basename, split, nice, "yes", whoami, sha224sum, hostid, users, stdbuf,
    base64, unexpand, cksum, od, paste, nproc, pathchk, sha256sum, wc, test,
    comm, arch, du, factor, sha512sum, md5sum, tr, runcon, env, dirname,
    tsort, join, shuf, install, logname, pinky, nohup, expr, pr, tty, timeout,
    tail, "[", seq, sha384sum, nl, head, id, mkfifo, sum, dircolors, ptx, shred,
    tac, link, chroot, vdir, chown, touch, ls, dd, uname, "true", pwd, date,
    chgrp, chmod, mktemp, cat, mknod, sync, ln, "false", rm, mv, cp, echo,
    readlink, sleep, stty, mkdir, df, dir, rmdir, touch
    ]

# dpkg -L login | grep bin | xargs ls -ld | grep -v '^d' | awk '{print $9}' | xargs -L 1 basename | tr "\\n" ","
- list: login_binaries
  items: [
    login, systemd, '"(systemd)"', systemd-logind, su,
    nologin, faillog, lastlog, newgrp, sg
    ]

# dpkg -L passwd | grep bin | xargs ls -ld | grep -v '^d' | awk '{print $9}' | xargs -L 1 basename | tr "\\n" ","
- list: passwd_binaries
  items: [
    shadowconfig, grpck, pwunconv, grpconv, pwck,
    groupmod, vipw, pwconv, useradd, newusers, cppw, chpasswd, usermod,
    groupadd, groupdel, grpunconv, chgpasswd, userdel, chage, chsh,
    gpasswd, chfn, expiry, passwd, vigr, cpgr
    ]

# repoquery -l shadow-utils | grep bin | xargs ls -ld | grep -v '^d' |
#     awk '{print $9}' | xargs -L 1 basename | tr "\\n" ","
- list: shadowutils_binaries
  items: [
    chage, gpasswd, lastlog, newgrp, sg, adduser, deluser, chpasswd,
    groupadd, groupdel, addgroup, delgroup, groupmems, groupmod, grpck, grpconv, grpunconv,
    newusers, pwck, pwconv, pwunconv, useradd, userdel, usermod, vigr, vipw, unix_chkpwd
    ]

- list: sysdigcloud_binaries
  items: [setup-backend, dragent, sdchecks]

- list: docker_binaries
  items: [docker, dockerd, exe, docker-compose, docker-entrypoi, docker-runc-cur, docker-current, dockerd-current]

- list: k8s_binaries
  items: [hyperkube, skydns, kube2sky, exechealthz, weave-net, loopback, bridge, openshift-sdn]

- list: lxd_binaries
  items: [lxd, lxcfs]

- list: http_server_binaries
  items: [nginx, httpd, httpd-foregroun, lighttpd, apache, apache2]

- list: db_server_binaries
  items: [mysqld, postgres, sqlplus]

- list: mysql_mgmt_binaries
  items: [mysql_install_d, mysql_ssl_rsa_s]

- list: postgres_mgmt_binaries
  items: [pg_dumpall, pg_ctl, pg_lsclusters, pg_ctlcluster]

- list: db_mgmt_binaries
  items: [mysql_mgmt_binaries, postgres_mgmt_binaries]

- list: nosql_server_binaries
  items: [couchdb, memcached, redis-server, rabbitmq-server, mongod]

- list: gitlab_binaries
  items: [gitlab-shell, gitlab-mon, gitlab-runner-b, git]

- macro: server_procs
  condition: proc.name in (http_server_binaries, db_server_binaries, docker_binaries, sshd)

# The explicit quotes are needed to avoid the - characters being
# interpreted by the filter expression.
- list: rpm_binaries
  items: [dnf, rpm, rpmkey, yum, '"75-system-updat"', rhsmcertd-worke, subscription-ma,
          repoquery, rpmkeys, rpmq, yum-cron, yum-config-mana, yum-debug-dump,
          abrt-action-sav, rpmdb_stat, microdnf, rhn_check, yumdb]

- list: openscap_rpm_binaries
  items: [probe_rpminfo, probe_rpmverify, probe_rpmverifyfile, probe_rpmverifypackage]

- macro: rpm_procs
  condition: proc.name in (rpm_binaries, openscap_rpm_binaries) or proc.name in (salt-minion)

- list: deb_binaries
  items: [dpkg, dpkg-preconfigu, dpkg-reconfigur, dpkg-divert, apt, apt-get, aptitude,
    frontend, preinst, add-apt-reposit, apt-auto-remova, apt-key,
    apt-listchanges, unattended-upgr, apt-add-reposit, apt-config, apt-cache
    ]

# The truncated dpkg-preconfigu is intentional, process names are
# truncated at the sysdig level.
- list: package_mgmt_binaries
  items: [rpm_binaries, deb_binaries, update-alternat, gem, pip, pip3, sane-utils.post, alternatives, chef-client, apk]

- macro: package_mgmt_procs
  condition: proc.name in (package_mgmt_binaries)

- macro: package_mgmt_ancestor_procs
  condition: proc.pname in (package_mgmt_binaries) or
             proc.aname[2] in (package_mgmt_binaries) or
             proc.aname[3] in (package_mgmt_binaries) or
             proc.aname[4] in (package_mgmt_binaries)

- macro: coreos_write_ssh_dir
  condition: (proc.name=update-ssh-keys and fd.name startswith /home/core/.ssh)

- macro: run_by_package_mgmt_binaries
  condition: proc.aname in (package_mgmt_binaries, needrestart)

- list: ssl_mgmt_binaries
  items: [ca-certificates]

- list: dhcp_binaries
  items: [dhclient, dhclient-script, 11-dhclient]

# A canonical set of processes that run other programs with different
# privileges or as a different user.
- list: userexec_binaries
  items: [sudo, su, suexec, critical-stack]

- list: known_setuid_binaries
  items: [
    sshd, dbus-daemon-lau, ping, ping6, critical-stack-, pmmcli,
    filemng, PassengerAgent, bwrap, osdetect, nginxmng, sw-engine-fpm,
    start-stop-daem
    ]

- list: user_mgmt_binaries
  items: [login_binaries, passwd_binaries, shadowutils_binaries]

- list: dev_creation_binaries
  items: [blkid, rename_device, update_engine, sgdisk]

- list: hids_binaries
  items: [aide, aide.wrapper, update-aide.con, logcheck, syslog-summary, osqueryd, ossec-syscheckd]

- list: vpn_binaries
  items: [openvpn]

- list: nomachine_binaries
  items: [nxexec, nxnode.bin, nxserver.bin, nxclient.bin]

- macro: system_procs
  condition: proc.name in (coreutils_binaries, user_mgmt_binaries)

- list: mail_binaries
  items: [
    sendmail, sendmail-msp, postfix, procmail, exim4,
    pickup, showq, mailq, dovecot, imap-login, imap,
    mailmng-core, pop3-login, dovecot-lda, pop3
    ]

- list: mail_config_binaries
  items: [
    update_conf, parse_mc, makemap_hash, newaliases, update_mk, update_tlsm4,
    update_db, update_mc, ssmtp.postinst, mailq, postalias, postfix.config.,
    postfix.config, postfix-script, postconf
    ]

- list: sensitive_file_names
  items: [/etc/shadow, /etc/sudoers, /etc/pam.conf]

- macro: sensitive_files
  condition: >
    fd.name startswith /etc and
    (fd.name in (sensitive_file_names)
     or fd.directory in (/etc/sudoers.d, /etc/pam.d))

# Indicates that the process is new. Currently detected using time
# since process was started, using a threshold of 5 seconds.
- macro: proc_is_new
  condition: proc.duration <= 5000000000

# Network
- macro: inbound
  condition: >
    (((evt.type in (accept,listen) and evt.dir=<) or
      (evt.type in (recvfrom,recvmsg) and evt.dir=< and
       fd.l4proto != tcp and fd.connected=false and fd.name_changed=true)) and
     (fd.typechar = 4 or fd.typechar = 6) and
     (fd.ip != "0.0.0.0" and fd.net != "127.0.0.0/8") and
     (evt.rawres >= 0 or evt.res = EINPROGRESS))

- macro: outbound
  condition: >
    (((evt.type = connect and evt.dir=<) or
      (evt.type in (sendto,sendmsg) and evt.dir=< and
       fd.l4proto != tcp and fd.connected=false and fd.name_changed=true)) and
     (fd.typechar = 4 or fd.typechar = 6) and
     (fd.ip != "0.0.0.0" and fd.net != "127.0.0.0/8") and
     (evt.rawres >= 0 or evt.res = EINPROGRESS))

# Very similar to inbound/outbound, but combines the tests together
# for efficiency.
- macro: inbound_outbound
  condition: >
    (((evt.type in (accept,listen,connect) and evt.dir=<)) or
     (fd.typechar = 4 or fd.typechar = 6) and
     (fd.ip != "0.0.0.0" and fd.net != "127.0.0.0/8") and
     (evt.rawres >= 0 or evt.res = EINPROGRESS))

- macro: ssh_port
  condition: fd.sport=22

# In a local/user rules file, you could override this macro to
# enumerate the servers for which ssh connections are allowed. For
# example, you might have a ssh gateway host for which ssh connections
# are allowed.
#
# In the main falco rules file, there isn't any way to know the
# specific hosts for which ssh access is allowed, so this macro just
# repeats ssh_port, which effectively allows ssh from all hosts. In
# the overridden macro, the condition would look something like
# "fd.sip="a.b.c.d" or fd.sip="e.f.g.h" or ..."
- macro: allowed_ssh_hosts
  condition: ssh_port

- rule: Disallowed SSH Connection
  desc: Detect any new ssh connection to a host other than those in an allowed group of hosts
  condition: (inbound_outbound) and ssh_port and not allowed_ssh_hosts
  output: Disallowed SSH Connection (command=%proc.cmdline connection=%fd.name user=%user.name)
  priority: NOTICE
  tags: [network]

# Use this to test whether the event occurred within a container.

# When displaying container information in the output field, use
# %container.info, without any leading term (file=%fd.name
# %container.info user=%user.name, and not file=%fd.name
# container=%container.info user=%user.name). The output will change
# based on the context and whether or not -pk/-pm/-pc was specified on
# the command line.
- macro: container
  condition: container.id != host

- macro: container_started
  condition: >
    ((evt.type = container or
     (evt.type=execve and evt.dir=< and proc.vpid=1)) and
     container.image.repository != incomplete)

- macro: interactive
  condition: >
    ((proc.aname=sshd and proc.name != sshd) or
    proc.name=systemd-logind or proc.name=login)

- list: cron_binaries
  items: [anacron, cron, crond, crontab]

# https://github.com/liske/needrestart
- list: needrestart_binaries
  items: [needrestart, 10-dpkg, 20-rpm, 30-pacman]

# Possible scripts run by sshkit
- list: sshkit_script_binaries
  items: [10_etc_sudoers., 10_passwd_group]

- list: plesk_binaries
  items: [sw-engine, sw-engine-fpm, sw-engine-kv, filemng, f2bmng]

# System users that should never log into a system. Consider adding your own
# service users (e.g. 'apache' or 'mysqld') here.
- macro: system_users
  condition: user.name in (bin, daemon, games, lp, mail, nobody, sshd, sync, uucp, www-data)

# These macros will be removed soon. Only keeping them to maintain
# compatiblity with some widely used rules files.
# Begin Deprecated
- macro: parent_ansible_running_python
  condition: (proc.pname in (python, pypy) and proc.pcmdline contains ansible)

- macro: parent_bro_running_python
  condition: (proc.pname=python and proc.cmdline contains /usr/share/broctl)

- macro: parent_python_running_denyhosts
  condition: >
    (proc.cmdline startswith "denyhosts.py /usr/bin/denyhosts.py" or
     (proc.pname=python and
     (proc.pcmdline contains /usr/sbin/denyhosts or
      proc.pcmdline contains /usr/local/bin/denyhosts.py)))

- macro: parent_python_running_sdchecks
  condition: >
    (proc.pname in (python, python2.7) and
    (proc.pcmdline contains /opt/draios/bin/sdchecks))

- macro: python_running_sdchecks
  condition: >
    (proc.name in (python, python2.7) and
    (proc.cmdline contains /opt/draios/bin/sdchecks))

- macro: parent_linux_image_upgrade_script
  condition: proc.pname startswith linux-image-

- macro: parent_java_running_echo
  condition: (proc.pname=java and proc.cmdline startswith "sh -c echo")

- macro: parent_scripting_running_builds
  condition: >
    (proc.pname in (php,php5-fpm,php-fpm7.1,python,ruby,ruby2.3,ruby2.1,node,conda) and (
       proc.cmdline startswith "sh -c git" or
       proc.cmdline startswith "sh -c date" or
       proc.cmdline startswith "sh -c /usr/bin/g++" or
       proc.cmdline startswith "sh -c /usr/bin/gcc" or
       proc.cmdline startswith "sh -c gcc" or
       proc.cmdline startswith "sh -c if type gcc" or
       proc.cmdline startswith "sh -c cd '/var/www/edi/';LC_ALL=en_US.UTF-8 git" or
       proc.cmdline startswith "sh -c /var/www/edi/bin/sftp.sh" or
       proc.cmdline startswith "sh -c /usr/src/app/crxlsx/bin/linux/crxlsx" or
       proc.cmdline startswith "sh -c make parent" or
       proc.cmdline startswith "node /jenkins/tools" or
       proc.cmdline startswith "sh -c '/usr/bin/node'" or
       proc.cmdline startswith "sh -c stty -a |" or
       proc.pcmdline startswith "node /opt/nodejs/bin/yarn" or
       proc.pcmdline startswith "node /usr/local/bin/yarn" or
       proc.pcmdline startswith "node /root/.config/yarn" or
       proc.pcmdline startswith "node /opt/yarn/bin/yarn.js"))


- macro: httpd_writing_ssl_conf
  condition: >
    (proc.pname=run-httpd and
     (proc.cmdline startswith "sed -ri" or proc.cmdline startswith "sed -i") and
     (fd.name startswith /etc/httpd/conf.d/ or fd.name startswith /etc/httpd/conf))

- macro: userhelper_writing_etc_security
  condition: (proc.name=userhelper and fd.name startswith /etc/security)

- macro: parent_Xvfb_running_xkbcomp
  condition: (proc.pname=Xvfb and proc.cmdline startswith 'sh -c "/usr/bin/xkbcomp"')

- macro: parent_nginx_running_serf
  condition: (proc.pname=nginx and proc.cmdline startswith "sh -c serf")

- macro: parent_node_running_npm
  condition: (proc.pcmdline startswith "node /usr/local/bin/npm" or
              proc.pcmdline startswith "node /usr/local/nodejs/bin/npm" or
              proc.pcmdline startswith "node /opt/rh/rh-nodejs6/root/usr/bin/npm")

- macro: parent_java_running_sbt
  condition: (proc.pname=java and proc.pcmdline contains sbt-launch.jar)

- list: known_container_shell_spawn_cmdlines
  items: []

- list: known_shell_spawn_binaries
  items: []

## End Deprecated

- macro: ansible_running_python
  condition: (proc.name in (python, pypy) and proc.cmdline contains ansible)

- macro: python_running_chef
  condition: (proc.name=python and (proc.cmdline contains yum-dump.py or proc.cmdline="python /usr/bin/chef-monitor.py"))

- macro: python_running_denyhosts
  condition: >
    (proc.name=python and
    (proc.cmdline contains /usr/sbin/denyhosts or
     proc.cmdline contains /usr/local/bin/denyhosts.py))

# Qualys seems to run a variety of shell subprocesses, at various
# levels. This checks at a few levels without the cost of a full
# proc.aname, which traverses the full parent heirarchy.
- macro: run_by_qualys
  condition: >
    (proc.pname=qualys-cloud-ag or
     proc.aname[2]=qualys-cloud-ag or
     proc.aname[3]=qualys-cloud-ag or
     proc.aname[4]=qualys-cloud-ag)

- macro: run_by_sumologic_securefiles
  condition: >
    ((proc.cmdline="usermod -a -G sumologic_collector" or
      proc.cmdline="groupadd sumologic_collector") and
     (proc.pname=secureFiles.sh and proc.aname[2]=java))

- macro: run_by_yum
  condition: ((proc.pname=sh and proc.aname[2]=yum) or
              (proc.aname[2]=sh and proc.aname[3]=yum))

- macro: run_by_ms_oms
  condition: >
    (proc.aname[3] startswith omsagent- or
     proc.aname[3] startswith scx-)

- macro: run_by_google_accounts_daemon
  condition: >
    (proc.aname[1] startswith google_accounts or
     proc.aname[2] startswith google_accounts)

# Chef is similar.
- macro: run_by_chef
  condition: (proc.aname[2]=chef_command_wr or proc.aname[3]=chef_command_wr or
              proc.aname[2]=chef-client or proc.aname[3]=chef-client or
              proc.name=chef-client)

- macro: run_by_adclient
  condition: (proc.aname[2]=adclient or proc.aname[3]=adclient or proc.aname[4]=adclient)

- macro: run_by_centrify
  condition: (proc.aname[2]=centrify or proc.aname[3]=centrify or proc.aname[4]=centrify)

- macro: run_by_puppet
  condition: (proc.aname[2]=puppet or proc.aname[3]=puppet)

# Also handles running semi-indirectly via scl
- macro: run_by_foreman
  condition: >
    (user.name=foreman and
     (proc.pname in (rake, ruby, scl) and proc.aname[5] in (tfm-rake,tfm-ruby)) or
     (proc.pname=scl and proc.aname[2] in (tfm-rake,tfm-ruby)))

- macro: java_running_sdjagent
  condition: proc.name=java and proc.cmdline contains sdjagent.jar

- macro: kubelet_running_loopback
  condition: (proc.pname=kubelet and proc.name=loopback)

- macro: python_mesos_marathon_scripting
  condition: (proc.pcmdline startswith "python3 /marathon-lb/marathon_lb.py")

- macro: splunk_running_forwarder
  condition: (proc.pname=splunkd and proc.cmdline startswith "sh -c /opt/splunkforwarder")

- macro: parent_supervise_running_multilog
  condition: (proc.name=multilog and proc.pname=supervise)

- macro: supervise_writing_status
  condition: (proc.name in (supervise,svc) and fd.name startswith "/etc/sb/")

- macro: pki_realm_writing_realms
  condition: (proc.cmdline startswith "bash /usr/local/lib/pki/pki-realm" and fd.name startswith /etc/pki/realms)

- macro: htpasswd_writing_passwd
  condition: (proc.name=htpasswd and fd.name=/etc/nginx/.htpasswd)

- macro: lvprogs_writing_conf
  condition: >
    (proc.name in (dmeventd,lvcreate,pvscan) and
     (fd.name startswith /etc/lvm/archive or
      fd.name startswith /etc/lvm/backup or
      fd.name startswith /etc/lvm/cache))

- macro: ovsdb_writing_openvswitch
  condition: (proc.name=ovsdb-server and fd.directory=/etc/openvswitch)

- macro: perl_running_plesk
  condition: (proc.cmdline startswith "perl /opt/psa/admin/bin/plesk_agent_manager" or
              proc.pcmdline startswith "perl /opt/psa/admin/bin/plesk_agent_manager")

- macro: perl_running_updmap
  condition: (proc.cmdline startswith "perl /usr/bin/updmap")

- macro: perl_running_centrifydc
  condition: (proc.cmdline startswith "perl /usr/share/centrifydc")

- macro: runuser_reading_pam
  condition: (proc.name=runuser and fd.directory=/etc/pam.d)

- macro: parent_ucf_writing_conf
  condition: (proc.pname=ucf and proc.aname[2]=frontend)

- macro: consul_template_writing_conf
  condition: >
    ((proc.name=consul-template and fd.name startswith /etc/haproxy) or
     (proc.name=reload.sh and proc.aname[2]=consul-template and fd.name startswith /etc/ssl))

- macro: countly_writing_nginx_conf
  condition: (proc.cmdline startswith "nodejs /opt/countly/bin" and fd.name startswith /etc/nginx)

- list: ms_oms_binaries
  items: [omi.postinst, omsconfig.posti, scx.postinst, omsadmin.sh, omiagent]

- macro: ms_oms_writing_conf
  condition: >
    ((proc.name in (omiagent,omsagent,in_heartbeat_r*,omsadmin.sh,PerformInventor)
       or proc.pname in (ms_oms_binaries)
       or proc.aname[2] in (ms_oms_binaries))
     and (fd.name startswith /etc/opt/omi or fd.name startswith /etc/opt/microsoft/omsagent))

- macro: ms_scx_writing_conf
  condition: (proc.name in (GetLinuxOS.sh) and fd.name startswith /etc/opt/microsoft/scx)

- macro: azure_scripts_writing_conf
  condition: (proc.pname startswith "bash /var/lib/waagent/" and fd.name startswith /etc/azure)

- macro: azure_networkwatcher_writing_conf
  condition: (proc.name in (NetworkWatcherA) and fd.name=/etc/init.d/AzureNetworkWatcherAgent)

- macro: couchdb_writing_conf
  condition: (proc.name=beam.smp and proc.cmdline contains couchdb and fd.name startswith /etc/couchdb)

- macro: update_texmf_writing_conf
  condition: (proc.name=update-texmf and fd.name startswith /etc/texmf)

- macro: slapadd_writing_conf
  condition: (proc.name=slapadd and fd.name startswith /etc/ldap)

- macro: openldap_writing_conf
  condition: (proc.pname=run-openldap.sh and fd.name startswith /etc/openldap)

- macro: ucpagent_writing_conf
  condition: (proc.name=apiserver and container.image.repository=docker/ucp-agent and fd.name=/etc/authorization_config.cfg)

- macro: iscsi_writing_conf
  condition: (proc.name=iscsiadm and fd.name startswith /etc/iscsi)

- macro: istio_writing_conf
  condition: (proc.name=pilot-agent and fd.name startswith /etc/istio)

- macro: symantec_writing_conf
  condition: >
    ((proc.name=symcfgd and fd.name startswith /etc/symantec) or
     (proc.name=navdefutil and fd.name=/etc/symc-defutils.conf))

- macro: liveupdate_writing_conf
  condition: (proc.cmdline startswith "java LiveUpdate" and fd.name in (/etc/liveupdate.conf, /etc/Product.Catalog.JavaLiveUpdate))

- macro: rancher_agent
  condition: (proc.name = agent and container.image.repository = rancher/agent)

- macro: sosreport_writing_files
  condition: >
    (proc.name=urlgrabber-ext- and proc.aname[3]=sosreport and
     (fd.name startswith /etc/pkt/nssdb or fd.name startswith /etc/pki/nssdb))

- macro: pkgmgmt_progs_writing_pki
  condition: >
    (proc.name=urlgrabber-ext- and proc.pname in (yum, yum-cron, repoquery) and
     (fd.name startswith /etc/pkt/nssdb or fd.name startswith /etc/pki/nssdb))

- macro: update_ca_trust_writing_pki
  condition: (proc.pname=update-ca-trust and proc.name=trust and fd.name startswith /etc/pki)

- macro: brandbot_writing_os_release
  condition: proc.name=brandbot and fd.name=/etc/os-release

- macro: selinux_writing_conf
  condition: (proc.name in (semodule,genhomedircon,sefcontext_comp) and fd.name startswith /etc/selinux)

- list: veritas_binaries
  items: [vxconfigd, sfcache, vxclustadm, vxdctl, vxprint, vxdmpadm, vxdisk, vxdg, vxassist, vxtune]

- macro: veritas_driver_script
  condition: (proc.cmdline startswith "perl /opt/VRTSsfmh/bin/mh_driver.pl")

- macro: veritas_progs
  condition: (proc.name in (veritas_binaries) or veritas_driver_script)

- macro: veritas_writing_config
  condition: (veritas_progs and (fd.name startswith /etc/vx or fd.name startswith /etc/opt/VRTS or fd.name startswith /etc/vom))

- macro: nginx_writing_conf
  condition: (proc.name in (nginx,nginx-ingress-c) and fd.name startswith /etc/nginx)

- macro: nginx_writing_certs
  condition: >
    (((proc.name=openssl and proc.pname=nginx-launch.sh) or proc.name=nginx-launch.sh) and fd.name startswith /etc/nginx/certs)

- macro: chef_client_writing_conf
  condition: (proc.pcmdline startswith "chef-client /opt/gitlab" and fd.name startswith /etc/gitlab)

- macro: centrify_writing_krb
  condition: (proc.name in (adjoin,addns) and fd.name startswith /etc/krb5)

- macro: cockpit_writing_conf
  condition: >
    ((proc.pname=cockpit-kube-la or proc.aname[2]=cockpit-kube-la)
     and fd.name startswith /etc/cockpit)

- macro: ipsec_writing_conf
  condition: (proc.name=start-ipsec.sh and fd.directory=/etc/ipsec)

- macro: exe_running_docker_save
  condition: (proc.cmdline startswith "exe /var/lib/docker" and proc.pname in (dockerd, docker))

# Ideally we'd have a length check here as well but sysdig
# filterchecks don't have operators like len()
- macro: sed_temporary_file
  condition: (proc.name=sed and fd.name startswith "/etc/sed")

- macro: python_running_get_pip
  condition: (proc.cmdline startswith "python get-pip.py")

- macro: python_running_ms_oms
  condition: (proc.cmdline startswith "python /var/lib/waagent/")

- macro: gugent_writing_guestagent_log
  condition: (proc.name=gugent and fd.name=GuestAgent.log)

- macro: dse_writing_tmp
  condition: (proc.name=dse-entrypoint and fd.name=/root/tmp__)

- macro: zap_writing_state
  condition: (proc.name=java and proc.cmdline contains "jar /zap" and fd.name startswith /root/.ZAP)

- macro: airflow_writing_state
  condition: (proc.name=airflow and fd.name startswith /root/airflow)

- macro: rpm_writing_root_rpmdb
  condition: (proc.name=rpm and fd.directory=/root/.rpmdb)

- macro: maven_writing_groovy
  condition: (proc.name=java and proc.cmdline contains "classpath /usr/local/apache-maven" and fd.name startswith /root/.groovy)

- macro: chef_writing_conf
  condition: (proc.name=chef-client and fd.name startswith /root/.chef)

- macro: kubectl_writing_state
  condition: (proc.name in (kubectl,oc) and fd.name startswith /root/.kube)

- macro: java_running_cassandra
  condition: (proc.name=java and proc.cmdline contains "cassandra.jar")

- macro: cassandra_writing_state
  condition: (java_running_cassandra and fd.directory=/root/.cassandra)

- rule: Write below binary dir
  desc: an attempt to write to any file below a set of binary directories
  condition: >
    bin_dir and evt.dir = < and open_write
    and not package_mgmt_procs
    and not exe_running_docker_save
    and not python_running_get_pip
    and not python_running_ms_oms
  output: >
    File below a known binary directory opened for writing (user=%user.name
    command=%proc.cmdline file=%fd.name parent=%proc.pname pcmdline=%proc.pcmdline gparent=%proc.aname[2])
  priority: ERROR
  tags: [filesystem]

# If you'd like to generally monitor a wider set of directories on top
# of the ones covered by the rule Write below binary dir, you can use
# the following rule and lists.

- list: monitored_directories
  items: [/boot, /lib, /lib64, /usr/lib, /usr/local/lib, /usr/local/sbin, /usr/local/bin, /root/.ssh, /etc/cardserver]

# Until https://github.com/draios/sysdig/pull/1153, which fixes
# https://github.com/draios/sysdig/issues/1152, is widely available,
# we can't use glob operators to match pathnames. Until then, we do a
# looser check to match ssh directories.
# When fixed, we will use "fd.name glob '/home/*/.ssh/*'"
- macro: user_ssh_directory
  condition: (fd.name startswith '/home' and fd.name contains '.ssh')

# google_accounts_(daemon)
- macro: google_accounts_daemon_writing_ssh
  condition: (proc.name=google_accounts and user_ssh_directory)

- macro: cloud_init_writing_ssh
  condition: (proc.name=cloud-init and user_ssh_directory)

- macro: mkinitramfs_writing_boot
  condition: (proc.pname in (mkinitramfs, update-initramf) and fd.directory=/boot)

- macro: monitored_dir
  condition: >
    (fd.directory in (monitored_directories)
     or user_ssh_directory)
    and not mkinitramfs_writing_boot

# Add conditions to this macro (probably in a separate file,
# overwriting this macro) to allow for specific combinations of
# programs writing below monitored directories.
#
# Its default value is an expression that always is false, which
# becomes true when the "not ..." in the rule is applied.
- macro: user_known_write_monitored_dir_conditions
  condition: (never_true)

- rule: Write below monitored dir
  desc: an attempt to write to any file below a set of binary directories
  condition: >
    evt.dir = < and open_write and monitored_dir
    and not package_mgmt_procs
    and not coreos_write_ssh_dir
    and not exe_running_docker_save
    and not python_running_get_pip
    and not python_running_ms_oms
    and not google_accounts_daemon_writing_ssh
    and not cloud_init_writing_ssh
    and not user_known_write_monitored_dir_conditions
  output: >
    File below a monitored directory opened for writing (user=%user.name
    command=%proc.cmdline file=%fd.name parent=%proc.pname pcmdline=%proc.pcmdline gparent=%proc.aname[2])
  priority: ERROR
  tags: [filesystem]

- list: safe_etc_dirs
  items: [/etc/cassandra, /etc/ssl/certs/java, /etc/logstash, /etc/nginx/conf.d, /etc/container_environment, /etc/hrmconfig]

- macro: fluentd_writing_conf_files
  condition: (proc.name=start-fluentd and fd.name in (/etc/fluent/fluent.conf, /etc/td-agent/td-agent.conf))

- macro: qualys_writing_conf_files
  condition: (proc.name=qualys-cloud-ag and fd.name=/etc/qualys/cloud-agent/qagent-log.conf)

- macro: git_writing_nssdb
  condition: (proc.name=git-remote-http and fd.directory=/etc/pki/nssdb)

- macro: plesk_writing_keys
  condition: (proc.name in (plesk_binaries) and fd.name startswith /etc/sw/keys)

- macro: plesk_install_writing_apache_conf
  condition: (proc.cmdline startswith "bash -hB /usr/lib/plesk-9.0/services/webserver.apache configure"
              and fd.name="/etc/apache2/apache2.conf.tmp")

- macro: plesk_running_mktemp
  condition: (proc.name=mktemp and proc.aname[3] in (plesk_binaries))

- macro: networkmanager_writing_resolv_conf
  condition: proc.aname[2]=nm-dispatcher and fd.name=/etc/resolv.conf

- macro: add_shell_writing_shells_tmp
  condition: (proc.name=add-shell and fd.name=/etc/shells.tmp)

- macro: duply_writing_exclude_files
  condition: (proc.name=touch and proc.pcmdline startswith "bash /usr/bin/duply" and fd.name startswith "/etc/duply")

- macro: xmlcatalog_writing_files
  condition: (proc.name=update-xmlcatal and fd.directory=/etc/xml)

- macro: datadog_writing_conf
  condition: ((proc.cmdline startswith "python /opt/datadog-agent" or
               proc.cmdline startswith "entrypoint.sh /entrypoint.sh datadog start" or
               proc.cmdline startswith "agent.py /opt/datadog-agent")
              and fd.name startswith "/etc/dd-agent")

- macro: rancher_writing_conf
  condition: (container.image.repository in (rancher_images)
              and proc.name in (lib-controller,rancher-dns,healthcheck,rancher-metadat)
              and (fd.name startswith "/etc/haproxy" or 
                   fd.name startswith "/etc/rancher-dns")
             )

- macro: curl_writing_pki_db
  condition: (proc.name=curl and fd.directory=/etc/pki/nssdb)

- macro: haproxy_writing_conf
  condition: ((proc.name in (update-haproxy-,haproxy_reload.) or proc.pname in (update-haproxy-,haproxy_reload,haproxy_reload.))
               and (fd.name=/etc/openvpn/client.map or fd.name startswith /etc/haproxy))

- macro: java_writing_conf
  condition: (proc.name=java and fd.name=/etc/.java/.systemPrefs/.system.lock)

- macro: rabbitmq_writing_conf
  condition: (proc.name=rabbitmq-server and fd.directory=/etc/rabbitmq)

- macro: rook_writing_conf
  condition: (proc.name=toolbox.sh and container.image.repository=rook/toolbox
              and fd.directory=/etc/ceph)

- macro: httpd_writing_conf_logs
  condition: (proc.name=httpd and fd.name startswith /etc/httpd/)

- macro: mysql_writing_conf
  condition: >
    ((proc.name in (start-mysql.sh, run-mysqld) or proc.pname=start-mysql.sh) and
     (fd.name startswith /etc/mysql or fd.directory=/etc/my.cnf.d))

- macro: redis_writing_conf
  condition: >
    (proc.name in (run-redis, redis-launcher.) and fd.name=/etc/redis.conf or fd.name startswith /etc/redis)

- macro: openvpn_writing_conf
  condition: (proc.name in (openvpn,openvpn-entrypo) and fd.name startswith /etc/openvpn)

- macro: php_handlers_writing_conf
  condition: (proc.name=php_handlers_co and fd.name=/etc/psa/php_versions.json)

- macro: sed_writing_temp_file
  condition: >
    ((proc.aname[3]=cron_start.sh and fd.name startswith /etc/security/sed) or
     (proc.name=sed and (fd.name startswith /etc/apt/sources.list.d/sed or
                         fd.name startswith /etc/apt/sed or
                         fd.name startswith /etc/apt/apt.conf.d/sed)))

- macro: cron_start_writing_pam_env
  condition: (proc.cmdline="bash /usr/sbin/start-cron" and fd.name=/etc/security/pam_env.conf)

# In some cases dpkg-reconfigur runs commands that modify /etc. Not
# putting the full set of package management programs yet.
- macro: dpkg_scripting
  condition: (proc.aname[2] in (dpkg-reconfigur, dpkg-preconfigu))

- macro: ufw_writing_conf
  condition: (proc.name=ufw and fd.directory=/etc/ufw)

- macro: calico_writing_conf
  condition: >
    (proc.name = calico-node and fd.name startswith /etc/calico)

- macro: prometheus_conf_writing_conf
  condition: (proc.name=prometheus-conf and fd.name startswith /etc/prometheus/config_out)

- macro: openshift_writing_conf
  condition: (proc.name=oc and fd.name startswith /etc/origin/node)

# Add conditions to this macro (probably in a separate file,
# overwriting this macro) to allow for specific combinations of
# programs writing below specific directories below
# /etc. fluentd_writing_conf_files is a good example to follow, as it
# specifies both the program doing the writing as well as the specific
# files it is allowed to modify.
#
# In this file, it just takes one of the programs in the base macro
# and repeats it.

- macro: user_known_write_etc_conditions
  condition: proc.name=confd

- macro: write_etc_common
  condition: >
    etc_dir and evt.dir = < and open_write
    and proc_name_exists
    and not proc.name in (passwd_binaries, shadowutils_binaries, sysdigcloud_binaries,
                          package_mgmt_binaries, ssl_mgmt_binaries, dhcp_binaries,
                          dev_creation_binaries, shell_mgmt_binaries,
                          mail_config_binaries,
                          sshkit_script_binaries,
                          ldconfig.real, ldconfig, confd, gpg, insserv,
                          apparmor_parser, update-mime, tzdata.config, tzdata.postinst,
                          systemd, systemd-machine, systemd-sysuser,
                          debconf-show, rollerd, bind9.postinst, sv,
                          gen_resolvconf., update-ca-certi, certbot, runsv,
                          qualys-cloud-ag, locales.postins, nomachine_binaries,
                          adclient, certutil, crlutil, pam-auth-update, parallels_insta,
                          openshift-launc, update-rc.d, puppet)
    and not proc.pname in (sysdigcloud_binaries, mail_config_binaries, hddtemp.postins, sshkit_script_binaries, locales.postins, deb_binaries, dhcp_binaries)
    and not fd.name pmatch (safe_etc_dirs)
    and not fd.name in (/etc/container_environment.sh, /etc/container_environment.json, /etc/motd, /etc/motd.svc)
    and not sed_temporary_file
    and not exe_running_docker_save
    and not ansible_running_python
    and not python_running_denyhosts
    and not fluentd_writing_conf_files
    and not user_known_write_etc_conditions
    and not run_by_centrify
    and not run_by_adclient
    and not qualys_writing_conf_files
    and not git_writing_nssdb
    and not plesk_writing_keys
    and not plesk_install_writing_apache_conf
    and not plesk_running_mktemp
    and not networkmanager_writing_resolv_conf
    and not run_by_chef
    and not add_shell_writing_shells_tmp
    and not duply_writing_exclude_files
    and not xmlcatalog_writing_files
    and not parent_supervise_running_multilog
    and not supervise_writing_status
    and not pki_realm_writing_realms
    and not htpasswd_writing_passwd
    and not lvprogs_writing_conf
    and not ovsdb_writing_openvswitch
    and not datadog_writing_conf
    and not curl_writing_pki_db
    and not haproxy_writing_conf
    and not java_writing_conf
    and not dpkg_scripting
    and not parent_ucf_writing_conf
    and not rabbitmq_writing_conf
    and not rook_writing_conf
    and not php_handlers_writing_conf
    and not sed_writing_temp_file
    and not cron_start_writing_pam_env
    and not httpd_writing_conf_logs
    and not mysql_writing_conf
    and not openvpn_writing_conf
    and not consul_template_writing_conf
    and not countly_writing_nginx_conf
    and not ms_oms_writing_conf
    and not ms_scx_writing_conf
    and not azure_scripts_writing_conf
    and not azure_networkwatcher_writing_conf
    and not couchdb_writing_conf
    and not update_texmf_writing_conf
    and not slapadd_writing_conf
    and not symantec_writing_conf
    and not liveupdate_writing_conf
    and not sosreport_writing_files
    and not selinux_writing_conf
    and not veritas_writing_config
    and not nginx_writing_conf
    and not nginx_writing_certs
    and not chef_client_writing_conf
    and not centrify_writing_krb
    and not cockpit_writing_conf
    and not ipsec_writing_conf
    and not httpd_writing_ssl_conf
    and not userhelper_writing_etc_security
    and not pkgmgmt_progs_writing_pki
    and not update_ca_trust_writing_pki
    and not brandbot_writing_os_release
    and not redis_writing_conf
    and not openldap_writing_conf
    and not ucpagent_writing_conf
    and not iscsi_writing_conf
    and not istio_writing_conf
    and not ufw_writing_conf
    and not calico_writing_conf
    and not prometheus_conf_writing_conf
    and not openshift_writing_conf
    and not rancher_writing_conf

- rule: Write below etc
  desc: an attempt to write to any file below /etc
  condition: write_etc_common
  output: "File below /etc opened for writing (user=%user.name command=%proc.cmdline parent=%proc.pname pcmdline=%proc.pcmdline file=%fd.name program=%proc.name gparent=%proc.aname[2] ggparent=%proc.aname[3] gggparent=%proc.aname[4])"
  priority: ERROR
  tags: [filesystem]

- list: known_root_files
  items: [/root/.monit.state, /root/.auth_tokens, /root/.bash_history, /root/.ash_history, /root/.aws/credentials,
          /root/.viminfo.tmp, /root/.lesshst, /root/.bzr.log, /root/.gitconfig.lock, /root/.babel.json, /root/.localstack,
          /root/.node_repl_history, /root/.mongorc.js, /root/.dbshell, /root/.augeas/history, /root/.rnd, /root/.wget-hsts, /health]

- list: known_root_directories
  items: [/root/.oracle_jre_usage, /root/.ssh, /root/.subversion, /root/.nami]

- macro: known_root_conditions
  condition: (fd.name startswith /root/orcexec.
              or fd.name startswith /root/.m2
              or fd.name startswith /root/.npm
              or fd.name startswith /root/.pki
              or fd.name startswith /root/.ivy2
              or fd.name startswith /root/.config/Cypress
              or fd.name startswith /root/.config/pulse
              or fd.name startswith /root/.config/configstore
              or fd.name startswith /root/jenkins/workspace
              or fd.name startswith /root/.jenkins
              or fd.name startswith /root/.cache
              or fd.name startswith /root/.sbt
              or fd.name startswith /root/.java
              or fd.name startswith /root/.glide
              or fd.name startswith /root/.sonar
              or fd.name startswith /root/.v8flag
              or fd.name startswith /root/infaagent
              or fd.name startswith /root/.local/lib/python
              or fd.name startswith /root/.pm2
              or fd.name startswith /root/.gnupg
              or fd.name startswith /root/.pgpass
              or fd.name startswith /root/.theano
              or fd.name startswith /root/.gradle
              or fd.name startswith /root/.android
              or fd.name startswith /root/.ansible
              or fd.name startswith /root/.crashlytics
              or fd.name startswith /root/.dbus
              or fd.name startswith /root/.composer
              or fd.name startswith /root/.gconf
              or fd.name startswith /root/.nv
              or fd.name startswith /root/.local/share/jupyter
              or fd.name startswith /root/oradiag_root
              or fd.name startswith /root/workspace
              or fd.name startswith /root/jvm
              or fd.name startswith /root/.node-gyp)

# Add conditions to this macro (probably in a separate file,
# overwriting this macro) to allow for specific combinations of
# programs writing below specific directories below
# / or /root.
#
# In this file, it just takes one of the condition in the base macro
# and repeats it.
- macro: user_known_write_root_conditions
  condition: fd.name=/root/.bash_history

- rule: Write below root
  desc: an attempt to write to any file directly below / or /root
  condition: >
    root_dir and evt.dir = < and open_write
    and not fd.name in (known_root_files)
    and not fd.directory in (known_root_directories)
    and not exe_running_docker_save
    and not gugent_writing_guestagent_log
    and not dse_writing_tmp
    and not zap_writing_state
    and not airflow_writing_state
    and not rpm_writing_root_rpmdb
    and not maven_writing_groovy
    and not chef_writing_conf
    and not kubectl_writing_state
    and not cassandra_writing_state
    and not known_root_conditions
    and not user_known_write_root_conditions
  output: "File below / or /root opened for writing (user=%user.name command=%proc.cmdline parent=%proc.pname file=%fd.name program=%proc.name)"
  priority: ERROR
  tags: [filesystem]

- macro: cmp_cp_by_passwd
  condition: proc.name in (cmp, cp) and proc.pname in (passwd, run-parts)

- rule: Read sensitive file trusted after startup
  desc: >
    an attempt to read any sensitive file (e.g. files containing user/password/authentication
    information) by a trusted program after startup. Trusted programs might read these files
    at startup to load initial state, but not afterwards.
  condition: sensitive_files and open_read and server_procs and not proc_is_new and proc.name!="sshd"
  output: >
    Sensitive file opened for reading by trusted program after startup (user=%user.name
    command=%proc.cmdline parent=%proc.pname file=%fd.name parent=%proc.pname gparent=%proc.aname[2])
  priority: WARNING
  tags: [filesystem]

- list: read_sensitive_file_binaries
  items: [
    iptables, ps, lsb_release, check-new-relea, dumpe2fs, accounts-daemon, sshd,
    vsftpd, systemd, mysql_install_d, psql, screen, debconf-show, sa-update,
    pam-auth-update, pam-config, /usr/sbin/spamd, polkit-agent-he, lsattr, file, sosreport,
    scxcimservera, adclient, rtvscand, cockpit-session, userhelper, ossec-syscheckd
    ]

# Add conditions to this macro (probably in a separate file,
# overwriting this macro) to allow for specific combinations of
# programs accessing sensitive files.
# fluentd_writing_conf_files is a good example to follow, as it
# specifies both the program doing the writing as well as the specific
# files it is allowed to modify.
#
# In this file, it just takes one of the macros in the base rule
# and repeats it.

- macro: user_read_sensitive_file_conditions
  condition: cmp_cp_by_passwd

- rule: Read sensitive file untrusted
  desc: >
    an attempt to read any sensitive file (e.g. files containing user/password/authentication
    information). Exceptions are made for known trusted programs.
  condition: >
    sensitive_files and open_read
    and proc_name_exists
    and not proc.name in (user_mgmt_binaries, userexec_binaries, package_mgmt_binaries,
     cron_binaries, read_sensitive_file_binaries, shell_binaries, hids_binaries,
     vpn_binaries, mail_config_binaries, nomachine_binaries, sshkit_script_binaries,
     in.proftpd, mandb, salt-minion, postgres_mgmt_binaries)
    and not cmp_cp_by_passwd
    and not ansible_running_python
    and not proc.cmdline contains /usr/bin/mandb
    and not run_by_qualys
    and not run_by_chef
    and not user_read_sensitive_file_conditions
    and not perl_running_plesk
    and not perl_running_updmap
    and not veritas_driver_script
    and not perl_running_centrifydc
    and not runuser_reading_pam
  output: >
    Sensitive file opened for reading by non-trusted program (user=%user.name program=%proc.name
    command=%proc.cmdline file=%fd.name parent=%proc.pname gparent=%proc.aname[2] ggparent=%proc.aname[3] gggparent=%proc.aname[4])
  priority: WARNING
  tags: [filesystem]

# Only let rpm-related programs write to the rpm database
- rule: Write below rpm database
  desc: an attempt to write to the rpm database by any non-rpm related program
  condition: >
    fd.name startswith /var/lib/rpm and open_write
    and not rpm_procs
    and not ansible_running_python
    and not python_running_chef
    and not exe_running_docker_save
  output: "Rpm database opened for writing by a non-rpm program (command=%proc.cmdline file=%fd.name parent=%proc.pname pcmdline=%proc.pcmdline)"
  priority: ERROR
  tags: [filesystem, software_mgmt]

- macro: postgres_running_wal_e
  condition: (proc.pname=postgres and proc.cmdline startswith "sh -c envdir /etc/wal-e.d/env /usr/local/bin/wal-e")

- macro: redis_running_prepost_scripts
  condition: (proc.aname[2]=redis-server and (proc.cmdline contains "redis-server.post-up.d" or proc.cmdline contains "redis-server.pre-up.d"))

- macro: rabbitmq_running_scripts
  condition: >
    (proc.pname=beam.smp and
    (proc.cmdline startswith "sh -c exec ps" or
     proc.cmdline startswith "sh -c exec inet_gethost" or
     proc.cmdline= "sh -s unix:cmd" or
     proc.cmdline= "sh -c exec /bin/sh -s unix:cmd 2>&1"))

- macro: rabbitmqctl_running_scripts
  condition: (proc.aname[2]=rabbitmqctl and proc.cmdline startswith "sh -c ")

- macro: run_by_appdynamics
  condition: (proc.pname=java and proc.pcmdline startswith "java -jar -Dappdynamics")

- rule: DB program spawned process
  desc: >
    a database-server related program spawned a new process other than itself.
    This shouldn\'t occur and is a follow on from some SQL injection attacks.
  condition: >
    proc.pname in (db_server_binaries)
    and spawned_process
    and not proc.name in (db_server_binaries)
    and not postgres_running_wal_e
  output: >
    Database-related program spawned process other than itself (user=%user.name
    program=%proc.cmdline parent=%proc.pname)
  priority: NOTICE
  tags: [process, database]

- rule: Modify binary dirs
  desc: an attempt to modify any file below a set of binary directories.
  condition: (bin_dir_rename) and modify and not package_mgmt_procs and not exe_running_docker_save
  output: >
    File below known binary directory renamed/removed (user=%user.name command=%proc.cmdline
    pcmdline=%proc.pcmdline operation=%evt.type file=%fd.name %evt.args)
  priority: ERROR
  tags: [filesystem]

- rule: Mkdir binary dirs
  desc: an attempt to create a directory below a set of binary directories.
  condition: mkdir and bin_dir_mkdir and not package_mgmt_procs
  output: >
    Directory below known binary directory created (user=%user.name
    command=%proc.cmdline directory=%evt.arg.path)
  priority: ERROR
  tags: [filesystem]

# This list allows for easy additions to the set of commands allowed
# to change thread namespace without having to copy and override the
# entire change thread namespace rule.
- list: user_known_change_thread_namespace_binaries
  items: []

- rule: Change thread namespace
  desc: >
    an attempt to change a program/thread\'s namespace (commonly done
    as a part of creating a container) by calling setns.
  condition: >
    evt.type = setns
    and not proc.name in (docker_binaries, k8s_binaries, lxd_binaries, sysdigcloud_binaries,
                          sysdig, nsenter, calico, oci-umount)
    and not proc.name in (user_known_change_thread_namespace_binaries)
    and not proc.name startswith "runc:"
    and not proc.pname in (sysdigcloud_binaries)
    and not python_running_sdchecks
    and not java_running_sdjagent
    and not kubelet_running_loopback
    and not rancher_agent
  output: >
    Namespace change (setns) by unexpected program (user=%user.name command=%proc.cmdline
    parent=%proc.pname %container.info)
  priority: NOTICE
  tags: [process]

# The binaries in this list and their descendents are *not* allowed
# spawn shells. This includes the binaries spawning shells directly as
# well as indirectly. For example, apache -> php/perl for
# mod_{php,perl} -> some shell is also not allowed, because the shell
# has apache as an ancestor.

- list: protected_shell_spawning_binaries
  items: [
    http_server_binaries, db_server_binaries, nosql_server_binaries, mail_binaries,
    fluentd, flanneld, splunkd, consul, smbd, runsv, PM2
    ]

- macro: parent_java_running_zookeeper
  condition: (proc.pname=java and proc.pcmdline contains org.apache.zookeeper.server)

- macro: parent_java_running_kafka
  condition: (proc.pname=java and proc.pcmdline contains kafka.Kafka)

- macro: parent_java_running_elasticsearch
  condition: (proc.pname=java and proc.pcmdline contains org.elasticsearch.bootstrap.Elasticsearch)

- macro: parent_java_running_activemq
  condition: (proc.pname=java and proc.pcmdline contains activemq.jar)

- macro: parent_java_running_cassandra
  condition: (proc.pname=java and (proc.pcmdline contains "-Dcassandra.config.loader" or proc.pcmdline contains org.apache.cassandra.service.CassandraDaemon))

- macro: parent_java_running_jboss_wildfly
  condition: (proc.pname=java and proc.pcmdline contains org.jboss)

- macro: parent_java_running_glassfish
  condition: (proc.pname=java and proc.pcmdline contains com.sun.enterprise.glassfish)

- macro: parent_java_running_hadoop
  condition: (proc.pname=java and proc.pcmdline contains org.apache.hadoop)

- macro: parent_java_running_datastax
  condition: (proc.pname=java and proc.pcmdline contains com.datastax)

- macro: nginx_starting_nginx
  condition: (proc.pname=nginx and proc.cmdline contains "/usr/sbin/nginx -c /etc/nginx/nginx.conf")

- macro: nginx_running_aws_s3_cp
  condition: (proc.pname=nginx and proc.cmdline startswith "sh -c /usr/local/bin/aws s3 cp")

- macro: consul_running_net_scripts
  condition: (proc.pname=consul and (proc.cmdline startswith "sh -c curl" or proc.cmdline startswith "sh -c nc"))

- macro: consul_running_alert_checks
  condition: (proc.pname=consul and proc.cmdline startswith "sh -c /bin/consul-alerts")

- macro: serf_script
  condition: (proc.cmdline startswith "sh -c serf")

- macro: check_process_status
  condition: (proc.cmdline startswith "sh -c kill -0 ")

# In some cases, you may want to consider node processes run directly
# in containers as protected shell spawners. Examples include using
# pm2-docker or pm2 start some-app.js --no-daemon-mode as the direct
# entrypoint of the container, and when the node app is a long-lived
# server using something like express.
#
# However, there are other uses of node related to build pipelines for
# which node is not really a server but instead a general scripting
# tool. In these cases, shells are very likely and in these cases you
# don't want to consider node processes protected shell spawners.
#
# We have to choose one of these cases, so we consider node processes
# as unprotected by default. If you want to consider any node process
# run in a container as a protected shell spawner, override the below
# macro to remove the "never_true" clause, which allows it to take effect.
- macro: possibly_node_in_container
  condition: (never_true and (proc.pname=node and proc.aname[3]=docker-containe))

# Similarly, you may want to consider any shell spawned by apache
# tomcat as suspect. The famous apache struts attack (CVE-2017-5638)
# could be exploited to do things like spawn shells.
#
# However, many applications *do* use tomcat to run arbitrary shells,
# as a part of build pipelines, etc.
#
# Like for node, we make this case opt-in.
- macro: possibly_parent_java_running_tomcat
  condition: (never_true and proc.pname=java and proc.pcmdline contains org.apache.catalina.startup.Bootstrap)

- macro: protected_shell_spawner
  condition: >
    (proc.aname in (protected_shell_spawning_binaries)
    or parent_java_running_zookeeper
    or parent_java_running_kafka
    or parent_java_running_elasticsearch
    or parent_java_running_activemq
    or parent_java_running_cassandra
    or parent_java_running_jboss_wildfly
    or parent_java_running_glassfish
    or parent_java_running_hadoop
    or parent_java_running_datastax
    or possibly_parent_java_running_tomcat
    or possibly_node_in_container)

- list: mesos_shell_binaries
  items: [mesos-docker-ex, mesos-slave, mesos-health-ch]

# Note that runsv is both in protected_shell_spawner and the
# exclusions by pname. This means that runsv can itself spawn shells
# (the ./run and ./finish scripts), but the processes runsv can not
# spawn shells.
- rule: Run shell untrusted
  desc: an attempt to spawn a shell below a non-shell application. Specific applications are monitored.
  condition: >
    spawned_process
    and shell_procs
    and proc.pname exists
    and protected_shell_spawner
    and not proc.pname in (shell_binaries, gitlab_binaries, cron_binaries, user_known_shell_spawn_binaries,
                           needrestart_binaries,
                           mesos_shell_binaries,
                           erl_child_setup, exechealthz,
                           PM2, PassengerWatchd, c_rehash, svlogd, logrotate, hhvm, serf,
                           lb-controller, nvidia-installe, runsv, statsite, erlexec)
    and not proc.cmdline in (known_shell_spawn_cmdlines)
    and not proc.aname in (unicorn_launche)
    and not consul_running_net_scripts
    and not consul_running_alert_checks
    and not nginx_starting_nginx
    and not nginx_running_aws_s3_cp
    and not run_by_package_mgmt_binaries
    and not serf_script
    and not check_process_status
    and not run_by_foreman
    and not python_mesos_marathon_scripting
    and not splunk_running_forwarder
    and not postgres_running_wal_e
    and not redis_running_prepost_scripts
    and not rabbitmq_running_scripts
    and not rabbitmqctl_running_scripts
    and not run_by_appdynamics
    and not user_shell_container_exclusions
  output: >
    Shell spawned by untrusted binary (user=%user.name shell=%proc.name parent=%proc.pname
    cmdline=%proc.cmdline pcmdline=%proc.pcmdline gparent=%proc.aname[2] ggparent=%proc.aname[3]
    aname[4]=%proc.aname[4] aname[5]=%proc.aname[5] aname[6]=%proc.aname[6] aname[7]=%proc.aname[7])
  priority: DEBUG
  tags: [shell]

- macro: allowed_openshift_registry_root
  condition: >
    (container.image.repository startswith openshift3/ or
     container.image.repository startswith registry.access.redhat.com/openshift3/)

# Source: https://docs.openshift.com/enterprise/3.2/install_config/install/disconnected_install.html
- macro: openshift_image
  condition: >
    (allowed_openshift_registry_root and
      (container.image.repository contains logging-deployment or
       container.image.repository contains logging-elasticsearch or
       container.image.repository contains logging-kibana or
       container.image.repository contains logging-fluentd or
       container.image.repository contains logging-auth-proxy or
       container.image.repository contains metrics-deployer or
       container.image.repository contains metrics-hawkular-metrics or
       container.image.repository contains metrics-cassandra or
       container.image.repository contains metrics-heapster or
       container.image.repository contains ose-haproxy-router or
       container.image.repository contains ose-deployer or
       container.image.repository contains ose-sti-builder or
       container.image.repository contains ose-docker-builder or
       container.image.repository contains ose-pod or
       container.image.repository contains ose-docker-registry or
       container.image.repository contains image-inspector))

- list: trusted_images
  items: [
    sysdig/agent, sysdig/falco, sysdig/sysdig, gcr.io/google_containers/hyperkube,
    quay.io/coreos/flannel, gcr.io/google_containers/kube-proxy, calico/node,
    rook/toolbox, cloudnativelabs/kube-router, consul, mesosphere/mesos-slave,
    datadog/docker-dd-agent, datadog/agent, docker/ucp-agent, gliderlabs/logspout
    ]

- macro: trusted_containers
  condition: (openshift_image or
              container.image.repository in (trusted_images) or
              container.image.repository startswith istio/proxy_ or
              container.image.repository startswith quay.io/sysdig)

- list: rancher_images
  items: [
    rancher/network-manager, rancher/dns, rancher/agent, 
    rancher/lb-service-haproxy, rancher/metadata, rancher/healthcheck
  ]

# Add conditions to this macro (probably in a separate file,
# overwriting this macro) to specify additional containers that are
# trusted and therefore allowed to run privileged.
#
# In this file, it just takes one of the images in trusted_containers
# and repeats it.
- macro: user_trusted_containers
  condition: (container.image.repository=sysdig/agent)

# Add conditions to this macro (probably in a separate file,
# overwriting this macro) to specify additional containers that are
# allowed to perform sensitive mounts.
#
# In this file, it just takes one of the images in trusted_containers
# and repeats it.
- macro: user_sensitive_mount_containers
  condition: (container.image.repository=sysdig/agent)

- rule: Launch Privileged Container
  desc: Detect the initial process started in a privileged container. Exceptions are made for known trusted images.
  condition: >
    container_started and container
    and container.privileged=true
    and not trusted_containers
    and not user_trusted_containers
  output: Privileged container started (user=%user.name command=%proc.cmdline %container.info image=%container.image.repository:%container.image.tag)
  priority: INFO
  tags: [container, cis]

# For now, only considering a full mount of /etc as
# sensitive. Ideally, this would also consider all subdirectories
# below /etc as well, but the globbing mechanism used by sysdig
# doesn't allow exclusions of a full pattern, only single characters.
- macro: sensitive_mount
  condition: (container.mount.dest[/proc*] != "N/A" or
              container.mount.dest[/var/run/docker.sock] != "N/A" or
              container.mount.dest[/var/lib/kubelet] != "N/A" or
              container.mount.dest[/var/lib/kubelet/pki] != "N/A" or
              container.mount.dest[/] != "N/A" or
              container.mount.dest[/etc] != "N/A" or
              container.mount.dest[/root*] != "N/A")

# The steps libcontainer performs to set up the root program for a container are:
# - clone + exec self to a program runc:[0:PARENT]
# - clone a program runc:[1:CHILD] which sets up all the namespaces
# - clone a second program runc:[2:INIT] + exec to the root program.
#   The parent of runc:[2:INIT] is runc:0:PARENT]
# As soon as 1:CHILD is created, 0:PARENT exits, so there's a race
#   where at the time 2:INIT execs the root program, 0:PARENT might have
#   already exited, or might still be around. So we handle both.
# We also let runc:[1:CHILD] count as the parent process, which can occur
# when we lose events and lose track of state.

- macro: container_entrypoint
  condition: (not proc.pname exists or proc.pname in (runc:[0:PARENT], runc:[1:CHILD], docker-runc, exe))

- rule: Launch Sensitive Mount Container
  desc: >
    Detect the initial process started by a container that has a mount from a sensitive host directory
    (i.e. /proc). Exceptions are made for known trusted images.
  condition: >
    container_started and container
    and sensitive_mount
    and not trusted_containers
    and not user_sensitive_mount_containers
  output: Container with sensitive mount started (user=%user.name command=%proc.cmdline %container.info image=%container.image.repository:%container.image.tag mounts=%container.mounts)
  priority: INFO
  tags: [container, cis]

# In a local/user rules file, you could override this macro to
# explicitly enumerate the container images that you want to run in
# your environment. In this main falco rules file, there isn't any way
# to know all the containers that can run, so any container is
# allowed, by using a filter that is guaranteed to evaluate to true.
# In the overridden macro, the condition would look something like
# (container.image.repository = vendor/container-1 or
# container.image.repository = vendor/container-2 or ...)

- macro: allowed_containers
  condition: (container.id exists)

- rule: Launch Disallowed Container
  desc: >
    Detect the initial process started by a container that is not in a list of allowed containers.
  condition: container_started and container and not allowed_containers
  output: Container started and not in allowed list (user=%user.name command=%proc.cmdline %container.info image=%container.image.repository:%container.image.tag)
  priority: WARNING
  tags: [container]

# Anything run interactively by root
# - condition: evt.type != switch and user.name = root and proc.name != sshd and interactive
#  output: "Interactive root (%user.name %proc.name %evt.dir %evt.type %evt.args %fd.name)"
#  priority: WARNING

- rule: System user interactive
  desc: an attempt to run interactive commands by a system (i.e. non-login) user
  condition: spawned_process and system_users and interactive
  output: "System user ran an interactive command (user=%user.name command=%proc.cmdline)"
  priority: INFO
  tags: [users]

- rule: Terminal shell in container
  desc: A shell was used as the entrypoint/exec point into a container with an attached terminal.
  condition: >
    spawned_process and container
    and shell_procs and proc.tty != 0
    and container_entrypoint
  output: >
    A shell was spawned in a container with an attached terminal (user=%user.name %container.info
    shell=%proc.name parent=%proc.pname cmdline=%proc.cmdline terminal=%proc.tty)
  priority: NOTICE
  tags: [container, shell]

# For some container types (mesos), there isn't a container image to
# work with, and the container name is autogenerated, so there isn't
# any stable aspect of the software to work with. In this case, we
# fall back to allowing certain command lines.

- list: known_shell_spawn_cmdlines
  items: [
    '"sh -c uname -p 2> /dev/null"',
    '"sh -c uname -s 2>&1"',
    '"sh -c uname -r 2>&1"',
    '"sh -c uname -v 2>&1"',
    '"sh -c uname -a 2>&1"',
    '"sh -c ruby -v 2>&1"',
    '"sh -c getconf CLK_TCK"',
    '"sh -c getconf PAGESIZE"',
    '"sh -c LC_ALL=C LANG=C /sbin/ldconfig -p 2>/dev/null"',
    '"sh -c LANG=C /sbin/ldconfig -p 2>/dev/null"',
    '"sh -c /sbin/ldconfig -p 2>/dev/null"',
    '"sh -c stty -a 2>/dev/null"',
    '"sh -c stty -a < /dev/tty"',
    '"sh -c stty -g < /dev/tty"',
    '"sh -c node index.js"',
    '"sh -c node index"',
    '"sh -c node ./src/start.js"',
    '"sh -c node app.js"',
    '"sh -c node -e \"require(''nan'')\""',
    '"sh -c node -e \"require(''nan'')\")"',
    '"sh -c node $NODE_DEBUG_OPTION index.js "',
    '"sh -c crontab -l 2"',
    '"sh -c lsb_release -a"',
    '"sh -c lsb_release -is 2>/dev/null"',
    '"sh -c whoami"',
    '"sh -c node_modules/.bin/bower-installer"',
    '"sh -c /bin/hostname -f 2> /dev/null"',
    '"sh -c locale -a"',
    '"sh -c  -t -i"',
    '"sh -c openssl version"',
    '"bash -c id -Gn kafadmin"',
    '"sh -c /bin/sh -c ''date +%%s''"'
    ]

# This list allows for easy additions to the set of commands allowed
# to run shells in containers without having to without having to copy
# and override the entire run shell in container macro. Once
# https://github.com/draios/falco/issues/255 is fixed this will be a
# bit easier, as someone could append of any of the existing lists.
- list: user_known_shell_spawn_binaries
  items: []

# This macro allows for easy additions to the set of commands allowed
# to run shells in containers without having to override the entire
# rule. Its default value is an expression that always is false, which
# becomes true when the "not ..." in the rule is applied.
- macro: user_shell_container_exclusions
  condition: (never_true)

- macro: login_doing_dns_lookup
  condition: (proc.name=login and fd.l4proto=udp and fd.sport=53)

# sockfamily ip is to exclude certain processes (like 'groups') that communicate on unix-domain sockets
# systemd can listen on ports to launch things like sshd on demand
- rule: System procs network activity
  desc: any network activity performed by system binaries that are not expected to send or receive any network traffic
  condition: >
    (fd.sockfamily = ip and system_procs)
    and (inbound_outbound)
    and not proc.name in (systemd, hostid, id)
    and not login_doing_dns_lookup
  output: >
    Known system binary sent/received network traffic
    (user=%user.name command=%proc.cmdline connection=%fd.name)
  priority: NOTICE
  tags: [network]

- list: openvpn_udp_ports
  items: [1194, 1197, 1198, 8080, 9201]

- list: l2tp_udp_ports
  items: [500, 1701, 4500, 10000]

- list: statsd_ports
  items: [8125]

- list: ntp_ports
  items: [123]

# Some applications will connect a udp socket to an address only to
# test connectivity. Assuming the udp connect works, they will follow
# up with a tcp connect that actually sends/receives data.
#
# With that in mind, we listed a few commonly seen ports here to avoid
# some false positives. In addition, we make the main rule opt-in, so
# it's disabled by default.

- list: test_connect_ports
  items: [0, 9, 80, 3306]

- macro: do_unexpected_udp_check
  condition: (never_true)

- list: expected_udp_ports
  items: [53, openvpn_udp_ports, l2tp_udp_ports, statsd_ports, ntp_ports, test_connect_ports]

- macro: expected_udp_traffic
  condition: fd.port in (expected_udp_ports)

- rule: Unexpected UDP Traffic
  desc: UDP traffic not on port 53 (DNS) or other commonly used ports
  condition: (inbound_outbound) and do_unexpected_udp_check and fd.l4proto=udp and not expected_udp_traffic
  output: >
    Unexpected UDP Traffic Seen
    (user=%user.name command=%proc.cmdline connection=%fd.name proto=%fd.l4proto evt=%evt.type %evt.args)
  priority: NOTICE
  tags: [network]

# With the current restriction on system calls handled by falco
# (e.g. excluding read/write/sendto/recvfrom/etc, this rule won't
# trigger).
# - rule: Ssh error in syslog
#   desc: any ssh errors (failed logins, disconnects, ...) sent to syslog
#   condition: syslog and ssh_error_message and evt.dir = <
#   output: "sshd sent error message to syslog (error=%evt.buffer)"
#   priority: WARNING

- macro: somebody_becoming_themself
  condition: ((user.name=nobody and evt.arg.uid=nobody) or
              (user.name=www-data and evt.arg.uid=www-data) or
              (user.name=_apt and evt.arg.uid=_apt) or
              (user.name=postfix and evt.arg.uid=postfix) or
              (user.name=pki-agent and evt.arg.uid=pki-agent) or
              (user.name=pki-acme and evt.arg.uid=pki-acme) or
              (user.name=nfsnobody and evt.arg.uid=nfsnobody) or
              (user.name=postgres and evt.arg.uid=postgres))

- macro: nrpe_becoming_nagios
  condition: (proc.name=nrpe and evt.arg.uid=nagios)

# In containers, the user name might be for a uid that exists in the
# container but not on the host. (See
# https://github.com/draios/sysdig/issues/954). So in that case, allow
# a setuid.
- macro: known_user_in_container
  condition: (container and user.name != "N/A")

# Add conditions to this macro (probably in a separate file,
# overwriting this macro) to allow for specific combinations of
# programs changing users by calling setuid.
#
# In this file, it just takes one of the condition in the base macro
# and repeats it.
- macro: user_known_non_sudo_setuid_conditions
  condition: user.name=root

# sshd, mail programs attempt to setuid to root even when running as non-root. Excluding here to avoid meaningless FPs
- rule: Non sudo setuid
  desc: >
    an attempt to change users by calling setuid. sudo/su are excluded. users "root" and "nobody"
    suing to itself are also excluded, as setuid calls typically involve dropping privileges.
  condition: >
    evt.type=setuid and evt.dir=>
    and (known_user_in_container or not container)
    and not user.name=root
    and not somebody_becoming_themself
    and not proc.name in (known_setuid_binaries, userexec_binaries, mail_binaries, docker_binaries,
                          nomachine_binaries)
    and not java_running_sdjagent
    and not nrpe_becoming_nagios
    and not user_known_non_sudo_setuid_conditions
  output: >
    Unexpected setuid call by non-sudo, non-root program (user=%user.name cur_uid=%user.uid parent=%proc.pname
    command=%proc.cmdline uid=%evt.arg.uid)
  priority: NOTICE
  tags: [users]

- rule: User mgmt binaries
  desc: >
    activity by any programs that can manage users, passwords, or permissions. sudo and su are excluded.
    Activity in containers is also excluded--some containers create custom users on top
    of a base linux distribution at startup.
    Some innocuous commandlines that don't actually change anything are excluded.
  condition: >
    spawned_process and proc.name in (user_mgmt_binaries) and
    not proc.name in (su, sudo, lastlog, nologin, unix_chkpwd) and not container and
    not proc.pname in (cron_binaries, systemd, systemd.postins, udev.postinst, run-parts) and
    not proc.cmdline startswith "passwd -S" and
    not proc.cmdline startswith "useradd -D" and
    not proc.cmdline startswith "systemd --version" and
    not run_by_qualys and
    not run_by_sumologic_securefiles and
    not run_by_yum and
    not run_by_ms_oms and
    not run_by_google_accounts_daemon
  output: >
    User management binary command run outside of container
    (user=%user.name command=%proc.cmdline parent=%proc.pname gparent=%proc.aname[2] ggparent=%proc.aname[3] gggparent=%proc.aname[4])
  priority: NOTICE
  tags: [host, users]

- list: allowed_dev_files
  items: [
    /dev/null, /dev/stdin, /dev/stdout, /dev/stderr,
    /dev/random, /dev/urandom, /dev/console, /dev/kmsg
    ]

# (we may need to add additional checks against false positives, see:
# https://bugs.launchpad.net/ubuntu/+source/rkhunter/+bug/86153)
- rule: Create files below dev
  desc: creating any files below /dev other than known programs that manage devices. Some rootkits hide files in /dev.
  condition: >
    fd.directory = /dev and
    (evt.type = creat or (evt.type = open and evt.arg.flags contains O_CREAT))
    and not proc.name in (dev_creation_binaries)
    and not fd.name in (allowed_dev_files)
    and not fd.name startswith /dev/tty
  output: "File created below /dev by untrusted program (user=%user.name command=%proc.cmdline file=%fd.name)"
  priority: ERROR
  tags: [filesystem]


# In a local/user rules file, you could override this macro to
# explicitly enumerate the container images that you want to allow
# access to EC2 metadata. In this main falco rules file, there isn't
# any way to know all the containers that should have access, so any
# container is alllowed, by repeating the "container" macro. In the
# overridden macro, the condition would look something like
# (container.image.repository = vendor/container-1 or
# container.image.repository = vendor/container-2 or ...)
- macro: ec2_metadata_containers
  condition: container

# On EC2 instances, 169.254.169.254 is a special IP used to fetch
# metadata about the instance. It may be desirable to prevent access
# to this IP from containers.
- rule: Contact EC2 Instance Metadata Service From Container
  desc: Detect attempts to contact the EC2 Instance Metadata Service from a container
  condition: outbound and fd.sip="169.254.169.254" and container and not ec2_metadata_containers
  output: Outbound connection to EC2 instance metadata service (command=%proc.cmdline connection=%fd.name %container.info image=%container.image.repository:%container.image.tag)
  priority: NOTICE
  tags: [network, aws, container]

# In a local/user rules file, you should override this macro with the
# IP address of your k8s api server. The IP 1.2.3.4 is a placeholder
# IP that is not likely to be seen in practice.
- macro: k8s_api_server
  condition: (fd.sip="1.2.3.4" and fd.sport=8080)

# In a local/user rules file, list the container images that are
# allowed to contact the K8s API Server from within a container. This
# might cover cases where the K8s infrastructure itself is running
# within a container.
- macro: k8s_containers
  condition: >
    (container.image.repository in (gcr.io/google_containers/hyperkube-amd64,
     gcr.io/google_containers/kube2sky, sysdig/agent, sysdig/falco,
     sysdig/sysdig))

- rule: Contact K8S API Server From Container
  desc: Detect attempts to contact the K8S API Server from a container
  condition: outbound and k8s_api_server and container and not k8s_containers
  output: Unexpected connection to K8s API Server from container (command=%proc.cmdline %container.info image=%container.image.repository:%container.image.tag connection=%fd.name)
  priority: NOTICE
  tags: [network, k8s, container]

# In a local/user rules file, list the container images that are
# allowed to contact NodePort services from within a container. This
# might cover cases where the K8s infrastructure itself is running
# within a container.
#
# By default, all containers are allowed to contact NodePort services.
- macro: nodeport_containers
  condition: container

- rule: Unexpected K8s NodePort Connection
  desc: Detect attempts to use K8s NodePorts from a container
  condition: (inbound_outbound) and fd.sport >= 30000 and fd.sport <= 32767 and container and not nodeport_containers
  output: Unexpected K8s NodePort Connection (command=%proc.cmdline connection=%fd.name)
  priority: NOTICE
  tags: [network, k8s, container]

- list: network_tool_binaries
  items: [nc, ncat, nmap]

- macro: network_tool_procs
  condition: proc.name in (network_tool_binaries)

# Container is supposed to be immutable. Package management should be done in building the image.
- rule: Launch Package Management Process in Container
  desc: Package management process ran inside container
  condition: >
    spawned_process and container and user.name != "_apt" and package_mgmt_procs and not package_mgmt_ancestor_procs
  output: >
    Package management process launched in container (user=%user.name
    command=%proc.cmdline container_id=%container.id container_name=%container.name image=%container.image.repository:%container.image.tag)
  priority: ERROR
  tags: [process]

- rule: Netcat Remote Code Execution in Container
  desc: Netcat Program runs inside container that allows remote code execution
  condition: >
    spawned_process and container and
    ((proc.name = "nc" and (proc.args contains "-e" or proc.args contains "-c")) or
     (proc.name = "ncat" and (proc.args contains "--sh-exec" or proc.args contains "--exec"))
    )
  output: >
    Netcat runs inside container that allows remote code execution (user=%user.name
    command=%proc.cmdline container_id=%container.id container_name=%container.name image=%container.image.repository:%container.image.tag)
  priority: WARNING
  tags: [network, process]

- rule: Lauch Suspicious Network Tool in Container
  desc: Detect network tools launched inside container
  condition: >
    spawned_process and container and network_tool_procs
  output: >
    Network tool launched in container (user=%user.name
    command=%proc.cmdline container_id=%container.id container_name=%container.name image=%container.image.repository:%container.image.tag)
  priority: NOTICE
  tags: [network, process]

# Application rules have moved to application_rules.yaml. Please look
# there if you want to enable them by adding to
# falco_rules.local.yaml.