Remove the libseccomp package from Dockerfile of `alpine` and `clearlinux`
because the libseccomp library is installed by the `ci/install_libseccomp.sh`
script when building the kata-agent.
Fixes: #3508
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
As the gentoo rootfs is not tested in our CI, we can't guarantee it
actually works as expected.
Whenever we have someone willing to maintain this rootfs we can have it
added back, and also add a CI job to test it altogether, avoiding then
any possible regression.
Fixes: #2144
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As the suse rootfs is not tested in our CI, we can't guarantee it
actually works as expected.
Whenver we have someone willing to maintain this rootfs we can have it
added back, and also add a CI job to test it altogether, avoiding then
any possible regression.
Fixes: #2145
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As the fedora rootfs is not tested in our CI, we can't guarantee it
actually works as expected.
Whenever we have someone willing to maintain the rootfs we can have it
added back, and also add a CI job to test it altogether, avoiding then
any possible regression.
Fixes: #2143
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As the centos rootfs is not tested in our CI, we can't guarantee it
actually works as expected.
Whenever we have someone willing to maintain the rootfs we can have it
added back, and also add a CI job to test it altogether, avoiding then
any possible regression.
Fixes: #2140
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Restore Debian as a rootfs.
1. revert of #3154, but some change
2. update debian version to 10.11
3. update `libstdc++-6-dev` to `libstdc++-8-dev`
4. changes discarded in QAT are not restored
Fixes: #3372
Signed-off-by: zhaojizhuang <571130360@qq.com>
Removed all errors/warnings pointed out by hadolint version 2.7.0, except for the following
ignored rules:
- "DL3008 warning: Pin versions in apt get install"
- "DL3041 warning: Specify version with `dnf install -y <package>-<version>`"
- "DL3033 warning: Specify version with `yum install -y <package>-<version>`"
- "DL3048 style: Invalid label key"
- "DL3003 warning: Use WORKDIR to switch to a directory"
- "DL3018 warning: Pin versions in apk add. Instead of apk add <package> use apk add <package>=<version>"
- "DL3037 warning: Specify version with zypper install -y <package>[=]<version>"
Fixes#3107
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
It seems the lack of protoc in the alpine containers is causing issues
with some of our CIs, such as the VFIO one.
Fixes: #3323
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Now if no options/arguments specified, the shell scripts will return an error:
ERROR: Invalid rootfs directory: ''
This commit will show usage if no options/arguments specified.
Fixes: #3256
Signed-off-by: bin <bin@hyper.sh>
Use the same runtime used for podman run also for the podman build cmd
Additionally remove "docker" from the docker_run_args variable
Fixes: #3239
Signed-off-by: Snir Sheriber <ssheribe@redhat.com>
- Upgrade Alpine guest rootfs to 3.15
- Specify a minor version rather than patch level as the Alpine
repositories use that.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
#2399 partially reverted #418, missing on returning to bootstrapping a
rootfs with `apk.static` instead of copying the entire root, which can
result in drastically larger (more than 10x) images. Revert this as well
(requires some updates to URL building).
Fixes: #3216
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Currently we do not have debian as part of the kata CI as we
do not have a mantainer, this PR removes debian as a supported
rootfs in order to have only the distros that we are supporting
and mantainining.
Fixes#3153
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
So that the debug console is more useful. In the meantime, remove
iptables as it is not used by kata-agent any more.
Fixes: #3138
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
The osbuilder needs to set up libseccomp library to build the kata-agent
because the kata-agent supports seccomp currently.
The library is built from the sources to create a static library for musl libc.
In addition, environment variables for the libseccomp crate are set to
link the library statically.
Fixes: #1476
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
When building with dracut method the build_rootfs_distro() is not called, in turn
detect_rust_version() isn't either, so the install_rust.sh script is gave a null
rust version. This changed the script to call detect_rust_version() right before
install_rust.sh.
Related to commit: f34f67d610Fixes#2862
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
and update the script in `ci/` accordingly.
When only parts of the Kata Containers repositories are checked out
(e.g. when building with Snap) and no Rust version is provided in
calling `install_rust.sh`, the scripts will attempt to clone the
appropriate repos to read the version, which will fail because the
directories already exist. Since we have read the version already, we
can just specify it.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
The agent build inside a Docker or Podman container has been re-enabled,
but we have since introduced the `$CI` environment variable. Pass it to
avoid checking out the tests repo to main when there is a dependency.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
or Podman. This is a partial revert of
76c18aa345. The rationale behind that
commit was the fact that the agent could not be built on Alpine, and
then this capability was removed altogether. The issue in Alpine has
since been resolved (see
https://github.com/kata-containers/osbuilder/issues/386). At the same
time, this ensures being able to run a glibc agent on hosts with distros
more recent than the osbuilder distro used (i.e. as of now, when you
build the agent on the host, and its glibc is newer than the one used in
the guest, the agent may encounter unresolved symbols).
Fixes#2398
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
The centos ppc64le gpg key at mirror.centos.org doesn't exist (link rot?).
Replacing it with url from CentOS/sig-core-AltArch on github.
Fixes: #2676
Signed-off-by: Aaron Simmons <paleozogt@gmail.com>
zsh doesn't support "==" as equal comparison operator, so
replace "==" with "=" to make the script more portable
Fixes: #2584
Signed-off-by: Binbin Zhang <binbin36520@gmail.com>
The script runs apt sync at some point which scans all possible fds
in order to close them. The operation is incredibly slow on VMs
and may lead to build timeouts.
Fix it by limiting the container runtime fds to a sane limit.
Fixes: #2510
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Once the ${ROOTFS_DIR} is created, the tool can't run the second
time since the directory is populated and the debootstrap tool
will fail.
Fix by deleting the contents of ${ROOTFS_DIR} if the directory exists.
Note that running make clean will also allow the re-run, it
is only an optimization for some cases the build fails in the middle.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
- no need to create `/usr/lib/systemd/systemd` link any more
- install `chrony` as extra package and install extra packages in chroot
rather than `debootstrap`, because `chrony` provides `time-daemon`,
which under 20.04 is provided by `systemd-timesyncd`, which is
required by `systemd`, and `debootstrap`'s conflict resolvement can't
handle this, but `apt`'s can.
Fixes: #2147
Depends-on: github.com/kata-containers/tests#3636
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
With lines like
0a2e2c6038/tools/osbuilder/rootfs-builder/fedora/config.sh (L8)
we imply that one can set another OS_VERSION and it will get picked up.
This is not the case when building inside Docker/Podman because the
variable is not passed to the container, which can lead to confusion.
Forward this env.
Fixes: #2378
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Removed all TOCs now that GitHub auto-generates them.
Also updated the documentation requirements doc removing the requirement
to add a TOC.
Fixes: #2022.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
If alpine image is created inside a container,
it does not get any golang version data. It will try
to get it by installing yq. To install yq curl is used.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Building rootfs does not depend on golang, delete intalling
golang may save build time.
And there is only rust agent now, the code for golang agent should
be deleted too.
Fixes: #2170
Signed-off-by: bin <bin@hyper.sh>
- Merge codepath in lib.sh with ppc64le -- do not install CMake
- Like ppc64le, do not install musl rather than just not using it
Fixes: #1975
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
While we introduced IMAGE_REGISTRY, we didn't actually update the
corresponding Dockerfiles to utilize it. Let's add
Fixes: #1622
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
For building rootfs with docker, glibc based rust target should be installed on ppc64le.
Additionally, protobuf-compiler would be required on ppc64le as it is not present by default.
Fixes: #1417
Signed-off-by: Amulya Meka <amulmek1@in.ibm.com>
Give the user chance to specify their own registry in event the default
provided are not accessible, desirable.
Fixes: #1393
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
- Install the required protobuf-compiler on Ubuntu
- Install correct libc Rust target (glibc on s390x)
- Do not skip Rust installation on s390x
Fixes: #1266
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Since there is no Rust target for musl on s390x, builds on s390x should use
glibc. This commit removes the "Cannot build Rust agent on s390x" restriction
in rootfs.sh and only installs musl in the build environment when it is
required.
Fixes: #1262
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Changed the user-visible urls to point to the right Kata Containers
files/repositories.
Fixes#234
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
To avoid hitting quota limit on docker.io, this changes the Fedora
and CentOS dockerfiles to pull the image from the projects registries.
Fixes#1324
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The osbuilder scripts include a bunch of code for installing cmake, even
though cmake is never invoked. versions.yaml claims it's needed to build
grpc-rs, but that doesn't appear to be in our dependency graph.
Presumably, we used to need this, but don't any more. So, remove all cmake
references.
Fixes#1309
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is not needed for Fedora, RHEL, and CentOS, but it is required when
using any other host OS. Having --security-opt apparmor=unconfined used
unconditionally is a no go as it'd break podman.
The reason this was only added when building for SUSE (as target distro)
was because debian and ubuntu condition would fall-through the switch to
the suse case (which makes me think that the fall-through was not
accidental).
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Falling through the switch cases in docker_extra_args() looks like a
typo and causes issues when building with podman, as `--security-opt
apparmor=unconfinded" shouldn't be passed if Apparmor is no enable on
the system.
Fixes: #1241
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Improve Kata Containers memory footprint by reducing debian
image size.
Without this change:
Debian image -> 256MB
With this change:
Debian image -> 128MB
Note: this change *will not* impact ubuntu image.
fixes#1188
Signed-off-by: Julio Montes <julio.montes@intel.com>
Define `before_starting_container` and `after_stopping_container`
functions, these functions run before and after the container that
builds the rootfs respectively.
Signed-off-by: Julio Montes <julio.montes@intel.com>
When building with AGENT_SOURCE_BIN pointing to an already built
kata-agent binary, the target directory needs to be created in the
rootfs tree.
Fixes#873
Signed-off-by: Ralf Haferkamp <rhafer@suse.com>
Since we always build musl kata-agent, there is no need to build
it inside a musl container. We can just build on the host and then
copy the binary to the target rootfs.
There are still a lot to clean up and it should be made so for ALL
target distros instead of just alpine. But this is at least working
for alpine first.
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
For building rust agent on ppc64le, the rust toolchain is built using
the LIBC implementation - gnu instead of musl.
Fixes: #481
Signed-off-by: Amulya Meka <amulmek1@in.ibm.com>
Don't modify /sbin/init on the build host when using command `AGENT_INIT="yes" ./rootfs.sh centos` to build rootfs.
Fixes: #430
Signed-off-by: liangxianlong <liang.xianlong@zte.com.cn>
move all osbuilder files into `tools` directory to be able
to merge this into kata-containers repo.
Signed-off-by: Salvador Fuentes <salvador.fuentes@intel.com>
