For the Gramine Shielded Containers guest kernel, CONFIG_NUMA must be
enabled.
Fixes #4266
Signed-off-by: Chelsea Mafrica <chelsea.e.mafrica@intel.com>
Add a new entry of arm-kernel-experimental and let the kernel build
script support to build it.
Fixes: #3280
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
I'm sure that it is correct to remove CONFIG_ARM64_UAO and
CONFIG_MANDATORY_FILE_LOCKING and . Both are gone in 5.15. Maintain a
specific config files for a kernel version is a little ugly. If someone
needs them, shout at me.
Fixes: #3280
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
As the support for vcpu hotplug is on the road, I pick them up here as
experimental to let user try cpu hotplug and virtio-mem on arm64.
Fixes: #3280
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
The name of SYS_SUPPORTS_HUGETLBFS has been changed to
ARCH_SUPPORTS_HUGETLBFS which is being selected on default
by another kernel config.
More info- 855f9a8e87
Change applicable from v5.13.
Fixes: #3720
Signed-off-by: Amulyam24 <amulmek1@in.ibm.com>
Let's take advantage of the fact that we've bumped to our kernel version
ot the 5.15 LTS and enable SGX by default, as it's present there.
Fixes: #3692
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Add support for building TDX kernel from github.com/intel/tdx
To build a guest kernel that supports Intel TDx run:
```
./build-kernel.sh -s -x tdx -d setup
./build-kernel.sh -s -x tdx -d install
```
fixes#3650
Signed-off-by: Julio Montes <julio.montes@intel.com>
Provide the `/proc/config.gz` file in guest kernels that allow the guest
to determine the kernel configuration used to build the running kernel.
Note that since `gunzip` expects to rename the gzip'ed file it operates
on, to use this feature you need to run something like the following in
the container environment:
```bash
# cat /proc/config.gz|gunzip -c
```
Fixes: #3445.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Pull #2795 recently added support for a closer-to-OCI behaviour for
VFIO devices, in which they appear to the container as VFIO devices,
rather than being interpreted by the guest kernel. However, in order
to use this, the Kata guest kernel needs to include the VFIO PCI
driver, along with dependencies like the Intel IOMMU driver.
The kernel as built by the scripts within Kata don't currently include
those, so this patch adds them.
fixes#2913
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The guest kernel configuration suggested for Kata, and which is used by the
CI didn't include CONFIG_PCI_MMCONFIG. That's kind of weird, MMCONFIG is
the modern normal way of handling configuration cycles.
In addition, due to a complex set of interactions through the ACPI code,
disabling MMCONFIG means that SHPC hotplug doesn't work: the driver is
included in the guest kernel, but will fail to probe on PCI to PCI bridges,
meaning it won't actually be activated.
Enable MMCONFIG so that we suggest and testa more typical guest kernel
configuration.
fixes#2288
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Optional build types are common for early adoption.
Lets add a flag to build and optional config.
e.g.
kernel-build.sh -b experimental
In the future instead of add more flags just add a new build type.
Signed-off-by: Carlos Venegas <jose.carlos.venegas.munoz@intel.com>
After 5.11-rc4, memory hotplug alignment size is reduced to 128M for 4K
page.
It works better for memory hotplug and nvdimm plug in kata on arm.
without this patch, memory hotplug will fail for the current memory
hotplug alignment is 1G but the nvdimm size align with 128M in kata.
After port it here, we can avoid a fix in qemu side.
Note: if you change the page size to other size than 4K, memory hotplug
will has no effect.
Fixes: #2707
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
This work patched the 4.19, 5.4 and 5.10 kernels, and now ptp_kvm can work
correctly when the host and guest use different kernel versions..
Fixes: #2123
Signed-off-by: Damon Kwok <damon-kwok@outlook.com>
Removed all TOCs now that GitHub auto-generates them.
Also updated the documentation requirements doc removing the requirement
to add a TOC.
Fixes: #2022.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Use the yq installed in the env. Needed
to build kata from docker. The container builder
has not an initial Go env.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
Add `CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y` to s390's guest kernel
config, which enables running with a secure image (as generated by
s390-tools' `genprotimg`).
Fixes: #2106
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
This config is not selected for ppc64le. It is
only supported on PPC32 for now. Moved it to
respective arch base.conf.
Signed-off-by: Amulyam24 <amulmek1@in.ibm.com>
Build kernel shell setup with -f, don't find patches directory path,
because patches_path is none, so fix this error.
Fixes: #1768
Signed-off-by: zyt312074545 <zyt312074545@hotmail.com>
Relevant changes for experimental :
42d3e2d04 virtiofs: calculate number of scatter-gather elements accurately
413daa1a3 fuse: connection remove fix
bf109c640 fuse: implement crossmounts
1866d779d fuse: Allow fuse_fill_super_common() for submounts
fcee216be fuse: split fuse_mount off of fuse_conn
8f622e949 fuse: drop fuse_conn parameter where possible
24754db27 fuse: store fuse_conn in fuse_req
c6ff213fe fuse: add submount support to <uapi/linux/fuse.h>
d78092e49 fuse: fix page dereference after free
9a752d18c virtiofs: add logic to free up a memory range
d0cfb9dcb virtiofs: maintain a list of busy elements
6ae330cad virtiofs: serialize truncate/punch_hole and dax fault path
9483e7d58 virtiofs: define dax address space operations
2a9a609a0 virtiofs: add DAX mmap support
c2d0ad00d virtiofs: implement dax read/write operations
ceec02d43 virtiofs: introduce setupmapping/removemapping commands
fd1a1dc6f virtiofs: implement FUSE_INIT map_alignment field
45f2348ec virtiofs: keep a list of free dax memory ranges
1dd539577 virtiofs: add a mount option to enable dax
22f3787e9 virtiofs: set up virtio_fs dax_device
f4fd4ae35 virtiofs: get rid of no_mount_options
b43b7e81e virtiofs: provide a helper function for virtqueue initialization
Fixes: #1639
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
In kernel 5.10.x on arm64 side, When CONFIG_RANDOM_BASE is enabled,
physical base address can be a negative number. It may lead to bug
when a PA is taken as a unsigned number in comparison, as PA is
calculated based on the physical base address. The bug has been fixed
latest code by commit ee7febce051945be2 in memory hotplug zone. We can
eliminate the bug in an easy way by casting the PA as a signed value in
the current code base to avoid lots of backport.
Depends-on: github.com/kata-containers/tests#3388
Fixes: #1596
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
