This has been introduced by 53bc4a432b,
where the condition was changed.
The correct condition is:
* If the list of supported tees does not contain the kata hypervisor
and the list of supported non tees does not contain the kata
hypervisor.
The error is that we were checking whether kata-hypervisor would contain
the list of supported tees, and that would almost always be false
(unless in the case where the list had an one and only one element).
Fixes: #9055 -- part II
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
A test `vcpu allocation k8s test` exhibits different behavior on s390x
For more details, please refer to issue #9093.
This commit is to make the test skipped until the issue is resolved on
the platform.
Fixes: #9093
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
This PR adds the ability to run k8s confidential tests in a
non-TEE environment.
Fixes#9055
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This will ensure no leftovers are in the node, which has been cause the
TDX CI to fail every now and then.
Fixes: #9081
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Delete the debugger pod created during the test, rather than already
existing debugger pods.
Also, send the output of "kubectl delete" to stderr, just in case it's
useful for debugging.
Fixes: #9069
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
We can use daemonset to deploy nydus snapshotter, which will decrease
one manual step both for Kata Containers and Confidential Containers CI.
Fixes: #8584
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
This PR replaces the add_kernel_initrd_annotations_to_yaml function
more generic so later can be used for other components.
Fixes#9054
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
1. add_requests_to_policy_settings allows one or more ttrpc requests
from the Host to the Guest. Example:
add_requests_to_policy_settings "${policy_settings_dir}" \
"ReadStreamRequest" "WriteStreamRequest"
2. add_copy_from_host_to_policy_settings allows executing on the Guest
the commands initiated behind the scenes by "kubectl cp" from the
Host to the Guest. Example:
add_copy_from_host_to_policy_settings "${policy_settings_dir}"
3. add_copy_from_guest_to_policy_settings allows executing on the Guest
the commands initiated behind the scenes by "kubectl cp" from the
Guest to the Host. Example:
add_copy_from_guest_to_policy_settings "${policy_settings_dir}" \
"/tmp/file.txt"
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
1. Rename install_kata_common to install_kata_core.
2. Add TODO for better way to install the Kata tools.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Automatically generate the test policy for k8s-attach-handlers.bats,
if AUTO_GENERATE_POLICY is enabled.
Steps:
- Create a temporary directory for the current test and copy the
common genpolicy settings into this new directory.
- Change genpolicy settings in the temp directory to allow the
"kubectl exec" command that this test needs. (For CoCo, exec is
blocked by the default policy settings)
- Auto-generate the policy for the test YAML file.
- Test as usual, using the YAML file.
- Clean-up the temporary settings described above.
Fixes: #8921
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Enable AUTO_GENERATE_POLICY for one of the Kata CI K8s test platforms.
Additional platforms will be enabled after testing them.
When AUTO_GENERATE_POLICY is enabled, create genpolicy settings that
are common for all tests. Some of the tests will make temporary copies
of these common settings and customize them as needed.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
1. Avoid repeating "kata-containers-k8s-tests".
2. Allow users to specify a different test namespace.
3. Introduce the TEST_CLUSTER_NAMESPACE variable, that will also be
useful when auto-generating the Agent Policy for these tests.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
This PR skips the k8s tests that are not working with cloud hypervisor
runtime-rs with its proper issue.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This PR is a split of #8585.
make the changes on the Github workflows, and the skeleton to deploy_snapshotter()
and cleanup_snapshotter() in tests/integration/kubernetes/gha-run.sh in this commit.
After initially merging this patch to trigger CI jobs for CoCo, which will begin executing
the dummy functions deploy_snapshotter() and cleanup_snapshotter(), the implementation details for these functions
remain in #8585. Our subsequent step involves transferring this logic to the PR #8484, enabling the PR to undergo CI testing prior to its merge.
Fixes: #8997
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
This PR adds workflow for running kubernetes test suite on ppc64le.
It uses scripts to create and delete the cluster using kubeadm as none of the current cluster creation tools are supported on Power.
Fixes: #7950
Signed-off-by: Amulyam24 <amulmek1@in.ibm.com>
The existing confidential basic test titled `Test unencrypted
confidential container launch success and verify that we are
running in a secure enclave` has been updated to incorporate
IBM Secure Execution (`qemu-se`).
Previously, a secure image was absent from kata-deploy, hindering
the inclusion of IBM SE in the test.
Thanks to the #6755 update, it is now possible to test the TEE.
This modification extends the existing test by introducing
`qemu-se`. The specific changes are outlined below:
- Add an additional test `cc-se-e2e-tests` to s390x nightly
- Expansion of `REMOTE_COMMAND_PER_HYPERVISOR` for `qemu-se`
- Temporary exclusion of two test cases currently incompatible with IBM SE
(`cpu-ns` is a common issue across all TEEs, while `inotify`
will be addressed in a subsequent pull request).
Fixes: #8913
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Add --show-output-of-passing-tests to the k8s integration tests. The
output of a passing test can be helpful when investigating a failure
of the same test.
Fixes: #8885
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
The changes to install and test genpolicy must come later, after CI
picks up these gha changes.
Fixes: #8856
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Log the list of the current pods between tests because these pods
might be related to cluster nodes occasionally running out of memory.
Fixes: #8769
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
To become more resilient against these kinds of errors:
deployment.apps/confidential-unencrypted created
pod/confidential-unencrypted-c5fdd6964-rrb6q condition met
ssh: connect to host 10.42.0.109 port 22: Connection refused
Fixes: #8687
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
This PR fixes the indentation of the confidential common
script for kubernetes tests.
Fixes#8698
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This will make the life easier for dragonball developers to properly
enable the tests once the tests are ready.
Fixes: #8569
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Print more information useful for debugging. Also, use a separate YAML
file for this test, instead of reusing someone else's file.
Fixes: #8270
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Implements the following test case:
Scenario: Check incorrect hash fails
**Given** I have a version of kata installed that has a kernel with the
initramfs built and config with rootfs_verity.scheme=dm-verity
rootfs_verity.hash=<incorrect hash of rootfs> set in the kernel_params
**When** I try and create a container a basic pod
**Then** The pod is doesn't run
**And** Ideally we'd get a helpful message to indicate why
Currently on CI only qemu-tdx is built with measured
rootfs support in the kernel, so the test is restriced to that
runtimeclass.
Fixes#7415
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Bring the setup_common() from CCv0 branch test's
integration/kubernetes/confidential/tests_common.sh. It should be used
to reduce boilerplates on the setup() of the tests.
Unlike the original code, this won't export the `test_start_time` variable
as it wouldn't be accurate to grab logs from the worker nodes due
date/time mismatch between the running tests machine and the worker
node. The function export the `node` variable which holds the name of
a random node which has kata installed. Apart from that, it exports the
`node_start_time` which capture the date/time when the test started,
relative to the `node`.
Tests that should inspect the logs can schedule pods/resources to the `node`
and use `node_start_time` as the value reference to grep the logs.
Fixes#7590
Co-authored-by: stevenhorsman <steven@uk.ibm.com>
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Bring the assert_logs_contain() from CCv0 branch tests'
integration/kubernetes/confidential/lib.sh.
Introduced the print_node_journal() which uses `kubectl debug` to print
the systemd's journal of a k8s's node.
Fixes#7590
Co-authored-by: stevenhorsman <steven@uk.ibm.com>
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This new function allow to the annotations to metadata section in a yaml
configuration file.
Co-authored-by: Ryan Savino <ryan.savino@amd.com>
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
