This PR adds the k8s stability Kata CoCo GHA workflow to run weekly
the k8s stability tests.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Add bind mounts for volumes defined by docker container images, unless
those mounts have been defined in the input K8s YAML file too.
For example, quay.io/opstree/redis defines two mounts:
/data
/node-conf
Before these changes, if these mounts were not defined in the YAML file
too, the auto-generated policy did not allow this container image to
start.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Instead of deploying and removing the snapshotter on every single run,
let's make sure the snapshotter is always deploy on the TDX case.
We're doing this as an experiment, in order to see if we'll be able to
reduce the failures we've been facing with the nydus snapshotter.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The `exec_host()` function often fails to capture the output of a given command
because the node debugger pod is prematurely terminated. To address this issue,
the function has been refactored to ensure consistent output capture by adjusting
the `kubectl debug` process as follows:
- Keep the node debugger pod running
- Wait until the pod is fully ready
- Execute the command using `kubectl exec`
- Capture the output and terminate the pod
This commit refactors `exec_host()` to implement the above steps, improving its reliability.
Fixes: #10081
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
I can't set up loop device with `exec_host`, which the command is
necessary for qemu-coco-dev. See issue #10133.
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
Update error message in pulling image encrypted to "failed to get decrypt key no suitable key found for decrypting layer key".
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
add tests for guest pull with configured timeout:
1) failed case: Test we cannot pull a large image that pull time exceeds a short creatcontainer timeout(10s) inside the guest
2) successful case: Test we can pull a large image inside the guest with increasing createcontainer timeout(120s)
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
add tests for pull images in the guest using trusted storage:
1) failed case: Test we cannot pull an image that exceeds the memory limit inside the guest
2) successful case: Test we can pull an image inside the guest using
trusted ephemeral storage.
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
This PR adds a k8s stability test that will be part of the CoCo Kata
stability tests that will run weekly.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This PR disables the k8s file volume test as we are having random failures
in multiple GHA CIs mainly because the exec_host function sometimes
does it not work properly.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This PR adds kubernetes stress-ng tests as part of the stability testing
for kata.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Currently, setting `io.containerd.cri.runtime-handler` annotation in
the yaml is not necessary for pulling images in the guest. All TEE
hypervisors are already running tests with guest-pulling enabled.
Therefore, we can remove some duplicate tests and re-enable the
guest-pull test for running different runtime pods at the same time.
While considering to support different containerd version, I recommend
to keep setting "io.containerd.cri.runtime-handler".
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
This PR updates the ubuntu image for stress Dockerfile. The main purpose
is to have a more updated image compared with the one that is in libpod
which has not been updated in a while.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
These new "kata-deploy" and "cleanup" actions are equivalent to
"kata-deploy-garm" "cleanup-garm", respectively, and should be
used on the workflows being migrated from GARM to
Github's managed runners.
Eventually "kata-deploy-garm" and "cleanup-garm" won't be used anymore
then we will be able to remove them.
See: #9940
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This PR updates the image that we are using in the kubectl debug command
as part of the exec host function, as the current alpine image does not
allow to create a temporary file for example and creates random kubernetes
failures.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Rather then modifying the kata-depoy scripts let's use Helm and
create a values.yaml that can be used to render the final templates
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
For easier handling of kata-deploy we can leverage a Helm chart to get
rid of all the base and overlays for the various components
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
After experimenting a little bit with those tests, they seem to be
passing on all the available TEE machines.
With this in mind, let's just enable them for those machines.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This PR removes duplicated entries (vcpus count, and available memory),
from onednn and openvino results files.
Fixes: #10119
Signed-off-by: David Esparza <david.esparza.borquez@intel.com>
The issue is similar to #10011.
The root cause is that tty and stderr are set to true at same time in
containerd: #10031.
Fixes: #10081
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
This PR encloses the search string for 'default_vcpus ='
and 'default_memory =' with double quotes in order to
parse the precise values, which are included in the kata
configuration file.
Fixes: #10118
Signed-off-by: David Esparza <david.esparza.borquez@intel.com>
1. Use the new value of AllowRequestsFailingPolicy after setting up a
new Policy. Before this change, the only way to enable
AllowRequestsFailingPolicy was to change the default Policy file,
built into the Guest rootfs image.
2. Ignore errors returned by regorus while evaluating Policy rules, if
AllowRequestsFailingPolicy was enabled. For example, trying to
evaluate the UpdateInterfaceRequest rules using a policy that didn't
define any UpdateInterfaceRequest rules results in a "not found"
error from regorus. Allow AllowRequestsFailingPolicy := true to
bypass that error.
3. Add simple CI test for AllowRequestsFailingPolicy.
These changes are restoring functionality that was broken recently by
commmit df23eb09a6.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
This PR updates the memory tests like fast footprint to use grep -F
instead of fgrep as this command has been deprecated.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This PR adds missing packages depenencies to install kbs cli in a fresh
new baremetal environment. This will avoid to have a failure when trying
to run install-kbs-client.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Rename k8s-exec-rejected.bats to k8s-policy-hard-coded.bats, getting
ready to test additional hard-coded policies using the same script.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Users of AUTO_GENERATE_POLICY=yes:
- Already tested *auto-generated* policy on any platform.
- Will be able to test *hard-coded* policy too on any platform, after
this change.
CI continues to test hard-coded policies just on the platforms listed
here, but testing those policies locally (outside of CI) on other
platforms can be useful too.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
