`VMContainerCapable` requires a present `kvm` device, which is not yet
available in our RISC-V runners. Skipped related tests if it is running
on `riscv-builder`.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Provide according tests to cover `kata-runtime` package, test
`kata-runtime`'s `check` functionality on riscv64 platforms.
Signed-off-by: Yuting Nie <nieyuting@iscas.ac.cn>
Add `getExpectedHostDetails` with expected value according to template
defined in `kata-check_data_riscv64_test.go`. This provides necessary
`HostInfo` for tests to cover `kata-check_riscv64.go`.
Signed-off-by: Yuting Nie <nieyuting@iscas.ac.cn>
Add definition of `testCPUInfoTemplate` which is retrieved from
`/proc/cpuinfo` of a QEMU emulated virtual machine on virt board.
Signed-off-by: Yuting Nie <nieyuting@iscas.ac.cn>
`testSetCPUTypeGeneric` will be used for writting `kata-check` in
`kata-runtime` on riscv64 platforms, enable building for later testing.
Signed-off-by: Yuting Nie <nieyuting@iscas.ac.cn>
Convert Rust arch to Go arch in Makefile, and add `riscv64-options.mk`
to provide definitions required for runtime to build on riscv64.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Enable `kata-runtime check` command to work on riscv64 platforms to make
sure required features/devices presents.
Co-authored-by: Yuting Nie <nieyuting@iscas.ac.cn>
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
We get the following error while writing containerd config
if a base dir `/etc/containerd` does not exist like:
```
sudo tee /etc/containerd/config.toml << EOF
...
EOF
tee: /etc/containerd/config.toml: No such file or directory
```
The commit makes sure a base directory for containerd before
writing config and drops the config file deletion because a
default behaviour of `tee` is overwriting.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
As reported in #11011, mounted secrets are available after
a container image is pulled by add_storage() for IBM SE.
But secure mount should be handled before the `add_storage()`.
Therefore, this commit divides cdh_handler() into:
- cdh_handler_trusted_storage()
- cdh_handler_sealed_secrets()
and calls cdh_handler_sealed_secrets() after add_storage()
while keeping cdh_handler_trusted_storage() unchanged.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
The test `Cannot get CDH resource when deny-all policy is set`
completes with a KBS policy set to deny-all. This affects the
future TEE test (e.g. k8s-sealed-secrets.bats) which makes a
request against KBS.
This commit introduces kbs_set_default_policy() and puts it to
the setup() in k8s-sealed-secrets.bats.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
With this we switch to fully testing with helm, instead of testimg with
the kustomizations (which will soon be removed).
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Let's use what we have in the k8s functional tests to create a common
function to deploy kata containers using our helm charts. This will
help us immensely in the kata-deploy testing side in the near future.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
This is not strictly needed, but it does help a lot when setting up a
cluster manually, while still relying on those scripts.
While here, let's also ensure the assignment is between quotes, to make
shellchecker happier.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
This commit introduces changes to add test data for multiple request
type in a single testcases.json file. This allows for stateful testing,
for ex: enable testing ExecProcessRequest using policy state set after testing
a CreateContainerRequest.
Fixes#11073.
Signed-off-by: Sumedh Sharma <sumsharma@microsoft.com>
TDX Quote Generation Service (QGS) signs TDREPORT sent to it from
Qemu (GetQuote hypercall). Qemu needs quote-generation-socket
address configured for IPC.
Currently, Kata govmm only enables vsock based IPC for QGS but
QGS supports Unix Domain Sockets too which works well for host
process to process IPC (Qemu <-> QGS).
The QGS configuration to enable UDS is to run the service with "-port=0"
parameter. The same works well here too: setting
"tdx_quote_generation_service_socket_port=0" let's users to enable
UDS based IPC.
The socket path is fixed in QGS and cannot be configured: when "-port=0"
is used, the socket appears in /var/run/tdx-qgs/qgs.socket.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Use "cargo build --release" when BUILD_TYPE was not specified, or when
BUILD_TYPE=release. The default "cargo build" behavior is to build in
debug mode.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
It hangs when invalid arguments are specified.
```bash
kata-deploy-6sr2p:/# /opt/kata-artifacts/scripts/kata-deploy.sh xxx
Action:
* xxx
...
Usage: /opt/kata-artifacts/scripts/kata-deploy.sh [install/cleanup/reset]
ERROR: invalid arguments
...
^C <- hang
```
I changed it to behave the same as when there are no arguments.
```bash
kata-deploy-6sr2p:/# /opt/kata-artifacts/scripts/kata-deploy.sh
Usage: /opt/kata-artifacts/scripts/kata-deploy.sh [install/cleanup/reset]
ERROR: invalid arguments
kata-deploy-6sr2p:/# echo $?
1
```
Fixes: #11068
Signed-off-by: Shunsuke Kimura <pbrehpuum@gmail.com>
Since some files generated by protobuf were share between
runtime-rs and kata agent, and the kata agent's dependency
image-rs dependened protobuf@3.7.1, thus we'd better to keep
the protobuf version aligned between runtime-rs and agent,
otherwise, we couldn't compile the runtime-rs and agent
at the same time.
Fixes: https://github.com/kata-containers/kata-containers/issues/10650
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
`GITHUB_RUNNER_CI_ARM64` is turned on for self hosted runners without
virtualization to skipped those tests depend on virtualization. This may
happen to other archs/runners as well, let's generalize it to
`GITHUB_RUNNER_CI_NON_VIRT` so we can reuse it on other archs.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
More straightforward implementation of hard_coded_policy_tests_enabled,
that avoids ShellCheck warning:
warning: Remove quotes from right-hand side of =~ to match as a regex rather than literally. [SC2076]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Fix unintended use of caller's variable. Use the corresponding function
parameter instead. ShellCheck:
warning: policy_settings_dir is referenced but not assigned. [SC2154]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Avoid masking command return values by declaring and only then assigning.
ShellCheck:
warning: Declare and assign separately to avoid masking return values. [SC2155]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Pick the the values exported by other scripts. ShellCheck:
warning: AUTO_GENERATE_POLICY is referenced but not assigned. [SC2154]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
ShellCheck:
warning: This assignment is only seen by the forked process. [SC2097]
warning: This expansion will not see the mentioned assignment. [SC2098]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
ShellCheck: add braces around variable references:
note: Prefer putting braces around variable references even when not strictly required. [SC2250]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
ShellCheck: export variables used outside of tests_common.sh - e.g.,
warning: timeout appears unused. Verify use (or export if used externally). [SC2034]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
