When using `virtio-net-pci` for IBM SE, the following error occurs:
```
update interface: Link not found (Address: f2:21:48:25:f4:10)
```
On s390x, it is more appropriate to use the CCW type of virtio
network device.
This commit ensures that a subchannel is configured accordingly.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
For IBM SE, the following kernel parameters are not required:
- Basic parameters (reboot and systemd-related)
- Rootfs parameters
This commit suppresses these parameters when IBM SE is configured.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
This commit configures the command line for IBM Secure Execution (SE)
and other TEEs. The following changes are made:
- Add a new item `Se` to ProtectionDeviceConfig and handle it at sandbox
- Introduce `add_se_protection_device()` for SE cmdline config
- Bypass rootfs image/initrd validity checks when SE is configured.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
`USE_BUILDIN_DB` is turned on by default for architectures do not
support `Dragonball`, which leads `s390x` is building `runtime-rs` with
`--features dragonball` presents.
Let's restrict `USE_BUILDIN_DB` to be enable only for architectures
supported by `Dragonball` (namely x86_64 and aarch64 as of now).
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
On qemu the run seems to error after ~4-7 runs, so try
a cut down version of repetitions to see if this helps us
get results in a stable way.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
We have a new metrics machine and environment
and the iperf jitter result failed as it finished too quickly,
so increase the minpercent to try and get it stable
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
We have a new metrics machine and environment
and the fio write.bw and iperf3 parallel.Results
tests failed for clh, as below
the minimum range, so increase the
minpercent to try and get it stable
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
We have a new metrics machine and environment
and the boot time test failed for clh, so increase the
maxpercent to try and get it stable
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
The iperf deployment is quite a lot out of date
and uses `master` for it's affinity and toleration,
so update this to control-plane, so it can run on
newer Kubernetes clusters
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
The new metrics runner seems slower, so we are
seeing errors like:
The iperf3 tests are failing with:
```
pod rejected: RuntimeClass "kata" not found
```
so give more time for it to succeed
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
- Move `kill_kata_components` from common.bash
into the metrics code base as the only user of it
- Increase the timeout on the start of containerd as
the last 10 nightlies metric tests have failed with:
```
223478 Killed sudo timeout -s SIGKILL "${TIMEOUT}" systemctl start containerd
```
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
- As the metrics tests are largely independent
then allow subsequent tests to run even if previous
ones failed. The results might not be perfect if
clean-up is required, but we can work on that later.
- Move the test results check out of the latency
test that seems arbitrary and into it's own job step
- Add timeouts to steps that might fail/hang if there
are containerd/K8s issues
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Currently the run-metrics job runs a manual install
and does this in a separate job before the metrics
tests run. This doesn't make sense as if we have multiple
CI runs in parallel (like we often do), there is a high chance
that the setup for another PR runs between the metrics
setup and the runs, meaning it's not testing the correct
version of code. We want to remove this from happening,
so install (and delete to cleanup) kata as part of the metrics
test jobs.
Also switch to kata-deploy rather than manual install for
simplicity and in order to test what we recommend to users.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
The drop-in path should be /etc/containerd (from the containers'
perspective), which mounts to the host path /etc/k0s/containerd.d.
With what we had we ended up dropping the file under the
/etc/k0s/containerd.d/containerd.d/, which is wrong.
This is a regression introduce by: 94b3348d3c
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Change kata-deploy script and Helm chart in order to be able to use kata-deploy on a microk8s cluster deployed with snap.
Fixes: #10830
Signed-off-by: Stephane Talbot <Stephane.Talbot@univ-savoie.fr>
Refator matrix setup and according dependencies installation logic in
`build-checks.yaml` and `build-checks-preview-riscv64.yaml` to provide
better readability and maintainability.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
`install-libseccomp` is applied only for `agent` component, and we are
already combining matrix with `if`s in steps, drop `install-libseccomp`
in matrix to reduce complexity.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
At the proper step pass-through the var KBUILD_SIGN_PIN
so that the kernel_headers step has the PIN for encrypting
the signing key.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
In kata-deploy-binaries.sh we need to pass-through the var
KBUILD_SIGN_PIN to the other static builder scripts.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Update kata-deploy-binaries-in-docker.sh to read the
env variable KBUILD_SIGN_PIN that either can be set via
GHA or other means.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
We need to place the signing key and cert at the right place
and hide the KBUILD_SIGN_PIN from echo'ing or xtrace
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
If KBUILD_SIGN_PIN is provided we can encrypt the signing key
for out-of-tree builds and second round jobs in GHA
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
The GitHub hosted runners for ARM64 do not provide virtualisation
support, thus we're just skipping the tests as those would check whether
or not the system is "VMContainerCapable".
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Update the code to install the version of k0s
that we have in our versions.yaml, rather than
just installing the latest, to help our CI being
less stable and prone to breaking due to things
we don't control.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Add external versions support for k0s and
initially pin it at v1.31.5 as our cri-o tests
started failing when v1.32 became the latest
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
