The issue is similar to #10011.
The root cause is that tty and stderr are set to true at same time in
containerd: #10031.
Fixes: #10081
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
1. Use the new value of AllowRequestsFailingPolicy after setting up a
new Policy. Before this change, the only way to enable
AllowRequestsFailingPolicy was to change the default Policy file,
built into the Guest rootfs image.
2. Ignore errors returned by regorus while evaluating Policy rules, if
AllowRequestsFailingPolicy was enabled. For example, trying to
evaluate the UpdateInterfaceRequest rules using a policy that didn't
define any UpdateInterfaceRequest rules results in a "not found"
error from regorus. Allow AllowRequestsFailingPolicy := true to
bypass that error.
3. Add simple CI test for AllowRequestsFailingPolicy.
These changes are restoring functionality that was broken recently by
commmit df23eb09a6.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
This PR adds missing packages depenencies to install kbs cli in a fresh
new baremetal environment. This will avoid to have a failure when trying
to run install-kbs-client.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Currently, there are some issues with pulling images in CI, such as :
https://github.com/kata-containers/kata-containers/actions/runs/10109747602/job/27959198585
This issue is caused by switching between different snapshotters for the same image in some scenarios.
To resolve it, we can check existing images to ensure all content is available locally before running tests.
Fixes: #10029
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
Rename k8s-exec-rejected.bats to k8s-policy-hard-coded.bats, getting
ready to test additional hard-coded policies using the same script.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Users of AUTO_GENERATE_POLICY=yes:
- Already tested *auto-generated* policy on any platform.
- Will be able to test *hard-coded* policy too on any platform, after
this change.
CI continues to test hard-coded policies just on the platforms listed
here, but testing those policies locally (outside of CI) on other
platforms can be useful too.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Generate policy that validates each exec command line argument, instead
of joining those args and validating the resulting string. Joining the
args ignored the fact that some of the args might include space
characters.
The older format from genpolicy-settings.json was similar to:
"ExecProcessRequest": {
"commands": [
"sh -c cat /proc/self/status"
],
"regex": []
},
That format will not be supported anymore. genpolicy will detect if its
users are trying to use the older "commands" field and will exit with
a relevant error message in that case.
The new settings format is:
"ExecProcessRequest": {
"allowed_commands": [
[
"sh",
"-c",
"cat /proc/self/status"
]
],
"regex": []
},
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Share a single test script variable for both:
- Allowing a command to be executed using Policy settings.
- Executing that command using "kubectl exec".
Fixes: #10014
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Currently, we have found that `assert_logs_contain` does not work on TDX.
We manually located the specific log, but it fails to get the log using `kubectl debug`. The error found in CI is:
```
warning: couldn't attach to pod/node-debugger-984fee00bd70.jf.intel.com-pdgsj,
falling back to streaming logs: error stream protocol error: unknown error
```
Upon debugging the TDX CI machine, we found an error in containerd:
```
Attach container from runtime service failed" err="rpc error: code = InvalidArgument desc = tty and stderr cannot both be true"
containerID="abc8c7a546c5fede4aae53a6ff2f4382ff35da331bfc5fd3843b0c8b231728bf"
```
We believe this is the root cause of the test failures in TDX CI.
Therefore, we need to ensure that tty and stderr are not set to true at same time.
Fixes: #10011
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
Signed-off-by: Wang, Arron <arron.wang@intel.com>
It is not good practice to call repack_secure_image() from a bats file
because the test code might not consider cases where `qemu-se` is used
as `KATA_HYPERVISOR`.
This commit moves the function call to set_metadata_annotation() if a key
includes `kernel_params` and `KATA_HYPERVISOR` is set to `qemu-se`, allowing
developers to focus on the test scenario itself.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Add policy to pod-secret-env.yaml from k8s-credentials-secrets.bats.
Policy was already auto-generated for the other pod used by the same
test (pod-secret.yaml). pod-secret-env.yaml was inconsistent,
because it was taking advantage of the "allow all" policy built into
the Guest image. Sooner or later, CI Guests for CoCo will not get the
"allow all" policy built in anymore and pod-secret-env.yaml would
have stopped working then.
Note that pod-secret-env.yaml continues to use an "allow all" policy
after these changes. #10033 must be solved before a more restrictive
policy will be generated for pod-secret-env.yaml.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Since #9904 was merged, newly introduced tests for `k8s-guest-pull-image-authenticated.bats`
have been failing on IBM SE (s390x). The agent fails to start because a kernel parameter
cannot pass to the guest VM via annotation. To fix this, the boot image must be rebuilt with
updated parameters.
This commit adds the rebuilding step in create_pod_yaml_with_private_image() for `qemu-se`.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
1. Use a container image that supports "ps --user 1000 -f".
2. Execute that command using:
sh -c "ps --user 1000 -f"
instead of passing additional arguments to sh:
sh -c ps --user 1000 -f
Fixes: #10019
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Keep track of individual exec args instead of joining them in the
policy text. Verifying each arg results in a more precise policy,
because some of the args might include space characters.
This improved validation applies to commands specified in K8s YAML
files using:
- livenessProbe
- readinessProbe
- startupProbe
- lifecycle.postStart
- lifecycle.preStop
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Add tests for genpolicy's handling of container.exec_commands. These
are commands allowed by the policy and originating from these input
K8s YAML fields:
- livenessProbe
- readinessProbe
- startupProbe
- lifecycle.postStart
- lifecycle.preStop
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
We had a typo in the attestation tests that we've copied around a
lot and Wainer spotted it in the authenticated registry tests, so let's fix it up now
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Add three new test cases for guest pull from an authenticated registry for
the following scenarios:
_**Scenario**: Creating a container from an authenticated image, with correct credentials via KBC works_
**Given** An authenticated container registry *quay.io/kata-containers/confidential-containers-auth*
**And** a version of kata deployed with a guest image that has an agent with `guest_pull`
feature enabled and nydus-snapshotter installed and configured for
[guest-pulling](https://github.com/containerd/nydus-snapshotter/blob/main/misc/snapshotter/config-coco-guest-pulling.toml)
**And** a KBS set up to have the correct auth.json for
registry *quay.io/kata-containers/confidential-containers-auth* embedded in the `"Credential"` section of `its resources file`
**When** I create a pod from the container image *quay.io/kata-containers/confidential-containers-auth:test*
**Then** The pull image works and the pod can start
_**Scenario**: Creating a container from an authenticated image, with incorrect credentials via KBC fails_
**Given** An authenticated container registry *quay.io/kata-containers/confidential-containers-auth*
**And** a version of kata deployed with a guest image that has an agent with `guest_pull`
feature enabled and nydus-snapshotter installed and configured for
[guest-pulling](https://github.com/containerd/nydus-snapshotter/blob/main/misc/snapshotter/config-coco-guest-pulling.toml)
**And** An installed kata CC with the sample_kbs set up to have the auth.json for registry
*quay.io/kata-containers/confidential-containers-auth* embedded in the `"Credential"` resource, but with a dummy user name and password
**When** I create a pod from the container image *quay.io/kata-containers/confidential-containers-auth:test*
**Then** The pull image fails with a message that reflects that the authorisation failed
_**Scenario**: Creating a container from an authenticated image, with no credentials fails_
**Given** An authenticated container registry *quay.io/kata-containers/confidential-containers-auth*
**And** a version of kata deployed with a guest image that has an agent with `guest_pull`
feature enabled and nydus-snapshotter installed and configured for
[guest-pulling](https://github.com/containerd/nydus-snapshotter/blob/main/misc/snapshotter/config-coco-guest-pulling.toml)
**And** An installed kata CC with no credentials section
**When** I create a pod from the container image *quay.io/kata-containers/confidential-containers-auth:test*
**Then** The pull image fails with a message that reflects that the authorisation failed
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
The only kernel built for measured rootfs was the kernel-tdx-experimental,
so this test only ran in the qemu-tdx job runs the test.
In commit 6cbdba7 we switched all TEE configurations to use the same kernel-confidential,
so rootfs measured is disabled for qemu-tdx too now.
The VM still fails to boot (because of a different reason...) but the bug
in the assert_logs_contain, fixed in this PR was masking the checks on the logs.
We still have a few open issues related to measured rootfs and generating
the root hash, so let's skip this test that doesn't work until they are looked at
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Add three new tests cases for guest-pull of an encrypted image
for the following scenarios:
_**Scenario: Pull encrypted image on guest with correct key works**_
**Given** I have a version of kata deployed with a guest image that has
an agent with `guest_pull` feature enabled and nydus-snapshotter installed
and configured for guest-pulling
**And** A public encrypted container image *i* with a decryption key *k*
that is configured as a resource the KBS, so that image-rs on the guest can
connect to it
**When** I try and create a pod from *i*
**Then** The pod is successfully created and runs
_**Scenario: Cannot pull encrypted image with no decryption key**_
**Given** I have a version of kata deployed with a guest image that has
an agent with `guest_pull` feature enabled and nydus-snapshotter installed
and configured for guest-pulling
**And** A public encrypted container image *i* with a decryption key *k*,
that is **not** configured in a KBS that image-rs on the guest can connect to
**When** I try and create a pod from *i*
**Then** The pod is not created with an error message that reflects why
_**Scenario: Cannot pull encrypted image with wrong decryption key**_
**Given** I have a version of kata deployed with a guest image that has
an agent with `guest_pull` feature enabled and nydus-snapshotter installed
and configured for guest-pulling
**And** A public encrypted container image *i* with a decryption key *k*
and a different key *k'* that is set as a resource in a KBS, that image-rs
on the guest can connect to
**When** I try and create a pod from *i*
**Then** The pod is not created with an error message that reflects why
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
The pipe needs adding to the grep, otherwise the grep
gets consumed as an argument to `print_node_journal` and
run in the debug pod.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Auto-generate the policy in k8s-security-context.bats - previously
blocked by lacking support for PodSecurityContext.runAsUser.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Modify the permissions of containerd.sock just when genpolicy needs
access to this socket, when testing GENPOLICY_PULL_METHOD=containerd.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Explain why the containerd settings on the local machine get set to
containerd's defaults when testing GENPOLICY_PULL_METHOD=containerd.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
oci-distribution is the value used by run-k8s-tests-on-aks.yaml, so
use the same value as default for GENPOLICY_PULL_METHOD in gha-run.sh.
The value of GENPOLICY_PULL_METHOD is currently compared just with
"containerd", but avoid possible future problems due to using a
different default value in gha-run.sh.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Currently, it is not viable to share a writable volume (e.g., emptyDir)
between containers in a single pod for IBM SE.
The following tests are relevant:
- pod-shared-volume.bats
- k8s-empty-dirs.bats
(See: https://github.com/kata-containers/kata-containers/issues/10002)
This commit skips the tests until the issue is resolved.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
For running a KBS with `se-verifier` in service,
specific credentials need to be configured.
(See https://github.com/confidential-containers/trustee/tree/main/attestation-service/verifier/src/se for details.)
This commit introduces two procedures to support IBM SE attestation:
- Prepare required files and directory structure
- Set necessary environment variables for KBS deployment
- Repackage a secure image once the KBS service address is determined
These changes enable `k8s-confidential-attestation.bats` for s390x.
Fixes: #9933
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
The current KBS deployment creates a file `key.bin` assuming that
`kustomization.yaml` is located in `overlays/`.
However, this does not hold true when the kustomize config is enabled
for multiple architectures. In such cases, the configuration file
should be located in `overlays/$(uname -m)`.
This commit changes the location for file creation.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Delete test scripts forcely in `Delete kata-deploy` step before
deleting all kata pods.
Fixes: #9980
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
The sealed secret test depends on the KBS to provide
the unsealed value of a vault secret.
This secret is provisioned to an environment variable.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
- Due to the error we hit with pulling the agnhost
image used in the liveness-probe tests, we want to leave
the console printing to help with debug when we next try
to bump the image-rs version
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
This test was fixed by previous patches in this PR: kata-containers#9695
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
This test was fixed by previous patches in this PR: kata-containers#9695
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
We have not seen instances of the nydus snapshotter hanging on its
deletion that we must patch its finalize.
Let's just drop this line for now.
Signed-Off-By: Adithya Krishnan Kannan <AdithyaKrishnan.Kannan@amd.com>
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As part of archiving the tests repo, we are eliminating the dependency on
`clone_tests_repo()`. The scripts using the function is as follows:
- `ci/install_rust.sh`.
- `ci/setup.sh`
- `ci/lib.sh`
This commit removes or replaces the files, and makes an adjustment accordingly.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
A multi-arch image for `alpine-bash-curl` has been pushed to and available
at `quay.io/kata-containers`.
This commit switches the test image to `quay.io/kata-containers/alpine-bash-curl`.
Fixes: #9935
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
- We only want to enable the sample verifier in the KBS for non-TEE
tests, so prevent an edge case where the TEE platform isn't set up
correctly and we might fall back to the sample and get false positives.
To prevent this we add guards around the sample policy enablement and
only run it for non confidential hardware
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Add --layers-cache-file-path flag to allow the user to
specify where the cache file for the container layers
is saved. This allows e.g. to have one cache file
independent of the user's working directory.
Signed-off-by: Leonard Cohnen <lc@edgeless.systems>
The following error was observed during the deployment of nydus snapshotter:
```
Error from server (NotFound):
the server could not find the requested resource ( pods/log nydus-snapshotter-5v82v)
'kubectl logs nydus-snapshotter-5v82v -n nydus-system' failed after 3 tries
Error: Process completed with exit code 1.
```
This error can occur when a pod is re-created by a daemonset during the retry interval.
This commit addresses the issue by using `--selector` rather than the pod name
for `kubectl logs/describe`.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
The following tests are disabled because they fail (alike with dragonball):
- k8s-cpu-ns.bats
- k8s-number-cpus.bats
- k8s-sandbox-vcpus-allocation.bats
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This PR uses the nodeport deployment from upstream trustee.
To ensure our deployment is as close to upstream trustee replace
the custom nodeport handling and replace it with nodeport
kustomized flavour from the trustee project.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This PR makes general improvements like definition of variables and
the use of them to improve the general setup script for kubernetes
tests.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Frequent errors have been observed during k8s e2e tests:
- The connection to the server 127.0.0.1:6443 was refused - did you specify the right host or port?
- Error from server (ServiceUnavailable): the server is currently unable to handle the request
- Error from server (NotFound): the server could not find the requested resource
These errors can be resolved by retrying the kubectl command.
This commit introduces a wrapper function in common.sh that runs kubectl up to 3 times
with a 5-second interval. Initially, this change only covers gha-run.sh for Kubernetes.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
It seems I was very lose on disabling some of the tests, and the issues
I faced could be related to other instabilities in the CI.
Let's re-enable this one, following what was done for the SEV, SNP, and
coco-qemu-dev.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
It seems I was very lose on disabling some of the tests, and the issues
I faced could be related to other instabilities in the CI.
Let's re-enable this one, following what was done for the SEV, SNP, and
coco-qemu-dev.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
It seems I was very lose on disabling some of the tests, and the issues
I faced could be related to other instabilities in the CI.
Let's re-enable this one, following what was done for the SEV, SNP, and
coco-qemu-dev.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
It seems I was very lose on disabling some of the tests, and the issues
I faced could be related to other instabilities in the CI.
Let's re-enable this one, following what was done for the SEV, SNP, and
coco-qemu-dev.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
It seems I was very lose on disabling some of the tests, and the issues
I faced could be related to other instabilities in the CI.
Let's re-enable this one, following what was done for the SEV, SNP, and
coco-qemu-dev.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's stop skipping the CDH tests for TDX, as know we should have an
environmemnt where it can run and should pass. :-)
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We must ensure we use the host ip to connect to the PCCS running on the
host side, instead of using localhost (which has a different meaning
from inside the KBS pod).
The reason we're using `hostname -i` isntead of the helper functions, is
because the helper functions need the coco-kbs deployed for them to
work, and what we do is before the deployment.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is generally useful debug output on test failures,
and specifically this has been useful for nydus-related
issues recently.
Signed-off-by: Chris Porter <porter@ibm.com>
A new PULL_TYPE environment variable is recognized by the kata-deploy's
install script to allow it to configure CRIO-O for guest-pull image pulling
type.
The tests/integration/kubernetes/gha-run.sh change allows for testing it:
```
export PULL_TYPE=guest-pull
cd tests/integration/kubernetes
./gha-run.sh deploy-k8s
```
Fixes#9474
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This PR replaces the name to use a variable that is already defined
to have a better uniformity across the general script.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
It was observed that the `node_start_time` value is sometimes empty,
leading to a test failure.
This commit retries fetching the value up to 3 times.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
This test fails when using `shared_fs=none` with the nydus snapshotter.
Issue tracked here: #9666
Skipping for now.
Signed-Off-By: Ryan Savino <ryan.savino@amd.com>
This test is failing due to the initContainers not being properly
handled with the guest image pulling.
Issue tracked here: #9668
Skipping for now.
Signed-Off-By: Ryan Savino <ryan.savino@amd.com>
This test fails when using `shared_fs=none` with the nydus napshotter,
Issue tracked here: #9664
Skipping for now.
Signed-Off-By: Ryan Savino <ryan.savino@amd.com>
To prevent download failures caused by high traffic to the Docker image,
opt for quay.io/prometheus/busybox:latest over docker.io/library/busybox:latest .
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
CreateContainerRequest objects can specify devices to be created inside
the guest VM. This change ensures that requested devices have a
corresponding entry in the PodSpec.
Devices that are added to the pod dynamically, for example via the
Device Plugin architecture, can be allowlisted globally by adding their
definition to the settings file.
Fixes: #9651
Signed-off-by: Markus Rudy <mr@edgeless.systems>
End of file should not end with --- mark. This will confuse tools like
yq and kubectl that might think this is another object.
Signed-off-by: Beraldo Leal <bleal@redhat.com>
Since yq frequently updates, let's upgrade to a version from February to
bypass potential issues with versions 4.41-4.43 for now. We can always
upgrade to the newest version if necessary.
Fixes#9354
Depends-on:github.com/kata-containers/tests#5818
Signed-off-by: Beraldo Leal <bleal@redhat.com>
Wainer noticed this is failing for the coco-qemu-dev case, and decided
to skip it, notifying me that he didn't fully understand why it was not
failing on TDX.
Turns out, though, this is also failing on TDX, and we need to skip it
there as well.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Add the CLI flag --runtime-class-names, which is used during
policy generation. For resources that can define a
runtimeClassName (e.g., Pods, Deployments, ReplicaSets,...)
the value must have any of the --runtime-class-names as
prefix, otherwise the resource is ignored.
This allows to run genpolicy on larger yaml
files defining many different resources and only generating
a policy for resources which will be deployed in a
confidential context.
Signed-off-by: Leonard Cohnen <lc@edgeless.systems>
Use the variable BATS_TEST_COMPLETED which is defined by the bats framework
when the test finishes. `BATS_TEST_COMPLETED=` (empty) means the test failed,
so the node syslogs will be printed only at that condition.
Fixes: #9750
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This test fails with qemu-coco-dev configuration and guest-pull image pull.
Issue: #9667
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
It's cloning the nydus-snapshotter repo from the version specified in
versions.yaml, however, the deployment files are set to pull in the
latest version of the snapshotter image. With this version we are
pinning the image version too.
This is a temporary fix as it should be better worked out at nydus-snapshotter
project side.
Fixes: #9742
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This test fails with qemu-coco-dev configuration and guest-pull image pull.
Issue: #9668
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This test fails with qemu-coco-dev configuration and guest-pull image pull.
Issue: #9666
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This test fails with qemu-coco-dev configuration and guest-pull image pull.
Issue: #9664
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This test fails with qemu-coco-dev configuration and guest-pull image pull.
Unlike other tests that I've seen failing on this scenario, k8s-seccomp.bats
fails after a couple of consecutive executions, so it's that kind of failure
that happens once in a while.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This will enable the k8s tests to leverage guest pulling when
PULL_TYPE=guest-pull for qemu-coco-dev runtimeclass.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The runtime handler annotation is required for Kubernetes <= 1.28 and
guest-pull pull type. So leverage $PULL_TYPE (which is exported by CI jobs)
to conditionally apply the annotation.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This takes a few minutes that could be saved, so let's avoid doing this
on all the platforms, but simply do this when it's needed (the baremetal
use case).
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Currently only "baremetal" runs all the tests, but we could easily run
"all" locally or using the github provided runners, even when not using
a "baremetal" system.
The reason I'd like to have a differentiation between "all" and
"baremetal" is because "baremetal" may require some cleanup, which "all"
can simply skip if testing against a fresh created VM.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
For now we've only exposed the option to deploy kata-deploy for k3s and
vanilla kubernetes when using containerd.
However, I do need to also deploy k0s and rke2 for an internal CI, and
having those exposed here do not hurt, and allow us to easily expand the
CI at any time in the future.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The k8s test suite halts on the first failure, i.e., failing-fast. This
isn't the behavior that we used to see when running tests on Jenkins and it
seems that running the entire test suite is still the most productive way. So
this disable fail-fast by default.
However, if you still wish to run on fail-fast mode then just export
K8S_TEST_FAIL_FAST=yes in your environment.
Fixes: #9697
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This test has failed in confidential runtime jobs. Skip it
until we don't have a fix.
Fixes: #9663
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
One of our machines is running CentOS 9 Stream, and we could easily
verify that we can build and install the kbs client there, thus we're
expanding the installation script to also support CentOS 9 Stream.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
`externals.coco-kbs.toolchain` is not defined, get the rust_version from
`externals.coco-trustee.toolchain` instead.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This PR enables the installation and unistallation of the kbs client
as well as general coco components needed for the TDX GHA CI.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This PR adds the use of custom Intel DCAP configuration when
deploying the KBS.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This test doesn't fail with the guest image pulling, but it for sure
should. :-)
We can see in the bats logs, something like:
```
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Scheduled 31s default-scheduler Successfully assigned kata-containers-k8s-tests/liveness-exec to 984fee00bd70.jf.intel.com
Normal Pulled 23s kubelet Successfully pulled image "quay.io/prometheus/busybox:latest" in 345ms (345ms including waiting)
Normal Started 21s kubelet Started container liveness
Warning Unhealthy 7s (x3 over 13s) kubelet Liveness probe failed: cat: can't open '/tmp/healthy': No such file or directory
Normal Killing 7s kubelet Container liveness failed liveness probe, will be restarted
Normal Pulled 7s kubelet Successfully pulled image "quay.io/prometheus/busybox:latest" in 389ms (389ms including waiting)
Warning Failed 5s kubelet Error: failed to create containerd task: failed to create shim task: the file /bin/sh was not found: unknown
Normal Pulling 5s (x3 over 23s) kubelet Pulling image "quay.io/prometheus/busybox:latest"
Normal Pulled 4s kubelet Successfully pulled image "quay.io/prometheus/busybox:latest" in 342ms (342ms including waiting)
Normal Created 4s (x3 over 23s) kubelet Created container liveness
Warning Failed 3s kubelet Error: failed to create containerd task: failed to create shim task: failed to mount /run/kata-containers/f0ec86fb156a578964007f7773a3ccbdaf60023106634fe030f039e2e154cd11/rootfs to /run/kata-containers/liveness/rootfs, with error: ENOENT: No such file or directory: unknown
Warning BackOff 1s (x3 over 3s) kubelet Back-off restarting failed container liveness in pod liveness-exec_kata-containers-k8s-tests(b1a980bf-a5b3-479d-97c2-ebdb45773eff)
```
Let's skip it for now as we have an issue opened to track it down:
https://github.com/kata-containers/kata-containers/issues/9665
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is another one that is related to initContainers not being properly
handled with the guest image pulling.
Let's skip it for now as we have
https://github.com/kata-containers/kata-containers/issues/9668 to track
it down.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Similarly to firecracker, which doesn't have support for virtio-fs /
virtio-9p, TDX used with `shared_fs=none` will face the very same
limitations.
The tests affected are:
* k8s-credentials-secrets.bats
* k8s-file-volume.bats
* k8s-inotify.bats
* k8s-nested-configmap-secret.bats
* k8s-projected-volume.bats
* k8s-volume.bats
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This test fails when using `shared_fs=none` with the nydus snapshotter,
and we're tracking the issue here:
https://github.com/kata-containers/kata-containers/issues/9664
For now, let's have it skipped.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The test has been failing on TDX for a while, and an issue has been
created to track it down, see:
https://github.com/kata-containers/kata-containers/issues/9663
For now, let's have it skipped.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's make sure the logs will print the correct annotation and its
value, instead of always mentioning "kernel" and "initrd".
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We're doing that as all tests are going to be running with
`shared_fs=none`, meaning that we don't need any specific test for this
case anymore.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This function will set the needed annotation for enforcing that the
image pull will be handled by the snapshotter set for the runtime
handler, instead of using the default one.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Given that we think the containerd -> snapshotter image cache
problems have been resolved by bumping to nydus-snapshotter v0.3.13
we can try removing the skips to test this out
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
- We previously have an expectation for the pause rootfs
to be pull on the host when we did a guest pull. We weren't
really clear why, but it is plausible related to the issues we had
with containerd and nydus caching. Now that is fixed we can begin
to address this with setting shared_fs=none, but let's start with
updating the rootfs host check to be not higher than expected
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
This test is called from `tests/integration/run_kuberentes_tests.sh`,
which already ensures that yq is installed.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
On 1423420, I've mistakenly disabled the tests entirely, for both
non-TEEs and TEEs.
This happened as I didn't realise that `confidential_setup` would take
non-TEEs into consideration. :-/
Now, let me follow-up on that and make sure that the tests will be
running on non-TEEs.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This function is a helper to check whether the KATA_HYPERVISOR being
used is a confidential hardware (TEE) or not, and we can use it to
skip or only run tests on those platforms when needed.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's rename it to `is_confidential_runtime_class`, and adapt all the
places where it's called.
The new name provides a better description, leading to a better
understanding of what the function really does.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's skip the policy addition for now, in order to get the TDX CI back
up and running, and then we can re-enable it as soon as we get
https://github.com/kata-containers/kata-containers/issues/9612 fixed.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's skip those tests on TEEs as we've been facing a reasonable amount
of issues, most likely on the containerd side, related to pulling the
image on the guest.
Once we're able to fix the issues on containerd, we can get back and
re-enable those by reverting this commit.
The decision of disabling the tests for TEEs is because the machines may
end up in a state where human intervention is necessary to get them back
to a functional state, and that's really not optimal for our CI.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This PR adds a k8s negative policy test to the confidential attestation
bats test.
Fixes#9437
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
The CH v39 upgrade in #9575 is currently blocked because of a bug in the
Mariner host kernel. To address this, we temporarily tweak the Mariner
CI to use an Ubuntu host and the Kata guest kernel, while retaining the
Mariner initrd. This is tracked in #9594.
Importantly, this allows us to preserve CI for genpolicy. We had to
tweak the default rules.rego however, as the OCI version is now
different in the Ubuntu host. This is tracked in #9593.
This change has been tested together with CH v39 in #9588.
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
With the addition of the 'qemu-coco-dev' runtimeClass we no longer need
to run CoCo tests on non-TEE environments with 'qemu'. As a result the
tests also no longer need to set the "io.katacontainers.config.hypervisor.image"
annotation to pods.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Enable the k8s tests for cloud hypervisor with devicemapper.
Fixes: #9221.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Co-authored-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Avoid auto-generating Policy on platforms that haven't been tested
yet with auto-generated Policy.
Support for auto-generated Policy on these additional platforms is
coming up in future PRs, so the tests being fixed here were
prematurely enabled.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Remove k8s-policy-set-keys.bats in preparation for using the regorus
crate instead of the OPA daemon for evaluating the Agent Policy. This
test depended on sending HTTP requests to OPA.
Fixes: #9388
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Auto-generate the policy and then simulate attacks from the K8s
control plane by modifying the test yaml files. The policy then
detects and blocks those changes.
These test cases are using K8s Pods. Additional policy failures
are injected during CI using other types of K8s resources - e.g.,
using Jobs and Replication Controllers - from separate PRs.
Fixes: #9491
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Auto-generate the policy and then simulate attacks from the K8s
control plane by modifying the test yaml files. The policy then
detects and blocks those changes.
These test cases are using K8s Replication Controllers. Additional
policy failures will be injected using other types of K8s resources
- e.g., using Pods and/or Jobs - in separate PRs.
Fixes: #9463
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
When running on non-TEE environments (e.g. KATA_HYPERVISOR=qemu) the tests should
be stressing the CoCo image (/opt/kata/share/kata-containers/kata-containers-confidential.img)
although currently the default image/initrd is built to be able to do guest-pull as well.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Enabled guest-pull tests on non-TEE environment. It know requires the SNAPSHOTTER environment
variable to avoid it running on jobs where nydus-snapshotter is not installed
Fixes: #9410
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This PR adds the function to uninstall kbs client command function
specially when we are running with baremetal devices.
Fixes#9460
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This PR defines the PULL_TYPE variable to avoid failures of unbound
variable when this is being test it locally.
Fixes#9453
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Auto-generate the policy and then simulate attacks from the K8s
control plane by modifying the test yaml files. The policy then
detects and blocks those changes.
These test cases are using K8s Jobs. Additional policy failures
will be injected using other types of K8s resources - e.g., using
Pods and/or Replication Controllers - in future PRs.
Fixes: #9406
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
- Add v1 image test case
- Install protobuf-compiler in build check
- Reset containerd config to default in kubernetes test if we are testing genpolicy
- Update docker_credential crate
- Add test that uses default pull method
- Use GENPOLICY_PULL_METHOD in test
Signed-off-by: Saul Paredes <saulparedes@microsoft.com>
This PR improves the kbs_k8s_delete function to verify that the
resources were properly deleted for baremetal environments.
Fixes#9379
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
