The teardown_common will print the description of the running pods, kill
them all and print the system's syslogs afterwards.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
After moving Arm64 CI nodes to new one, we do faced an interesting
issue for timeout when it executes the command with crictl runp,
the error is usally: code = DeadlineExceeded
Fixes: #11662
Signed-off-by: Kevin Zhao <kevin.zhao@linaro.org>
This series should make runtime-rs's vcpu allocation behaviour match the
behaviour of runtime-go so we can now enable pertinent tests which were
skipped so far due the difference between both shims.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Print more details about the behavior of "kubectl logs", trying to understand
errors like:
https://github.com/kata-containers/kata-containers/actions/runs/16662887973/job/47164791712
not ok 1 Check the number vcpus are correctly allocated to the sandbox
(in test file k8s-sandbox-vcpus-allocation.bats, line 37)
`[ `kubectl logs ${pods[$i]}` -eq ${expected_vcpus[$i]} ]' failed with status 2
No resources found in kata-containers-k8s-tests namespace.
...
k8s-sandbox-vcpus-allocation.bats: line 37: [: -eq: unary operator expected
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
- "confidential_emptyDir" becomes "emptyDir" in the settings file.
- "confidential_configMap" becomes "configMap" in settings.
- "mount_source_cpath" becomes "cpath".
- The new "root_path" gets used instead of the old "cpath" to point to
the container root path..
- "confidential_guest" is no longer used. By default it gets replaced
by "enable_configmap_secret_storages"=false, because CoCo is using
CopyFileRequest instead of the Storage data structures for ConfigMap
and/or Secret volume mounts during CreateContainerRequest.
- The value of "guest_pull" becomes true by default.
- "image_layer_verification" is no longer used - just CoCo's guest pull
is supported.
- The Request input files from unit tests are changing to reflect the
new default settings values described above.
- tests/integration/kubernetes/tests_common.sh adjusts the settings for
platforms that are not set-up for CoCo during CI (i.e., platforms
other than SNP, TDX, and CoCo Dev).
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
The actual memory usage on the host is equal to the hypervisor memory usage
plus the user memory usage. An OOM killer might kill the shim when the
memory limit on host is same with that of container and the container
consumes all available memory. In this case, the containerd will never
receive OOM event, but get "task exit" event. That makes the `k8s-oom.bats`
test fail.
The fix is to add a new container to increase the sandbox memory limit.
When the container "oom-test" is killed by OOM killer, there is still
available memory for the shim, so it will not be killed.
Signed-off-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
The teardown_common will print the description of the running pods, kill
them all and print the system's syslogs afterwards.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Set the node in the spec template of a Job manifest, allowing to use
set_node() on tests like k8s-parallel.bats
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The teardown_common will print the description of the running pods, kill
them all and print the system's syslogs afterwards.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The teardown_common will print the description of the running pods, kill
them all and print the system's syslogs afterwards.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
There are workflows that rely on `az aks install-cli` to get kubectl
installed. There is a well-known problem on install-cli, related with
API usage rate limit, that has recently caused the command to fail
quite often.
This is replacing install-cli with the azure/setup-kubectl github
action which has no such as rate limit problem.
While here, removed the install_cli() function from gha-run-k8s-common.sh
so avoid developers using it by mistake in the future.
Fixes#11463
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Removing files pertaining to SEV from
the CI framework.
Co-authored-by: Adithya Krishnan Kannan <AdithyaKrishnan.Kannan@amd.com>
Signed-off-by: Arvind Kumar <arvinkum@amd.com>
This commit updates the `tests_common.sh` script
to enable the `confidential_guest`
setting for the coco tests in the Kubernetes
integration tests.
Signed-off-by: Archana Choudhary <archana1@microsoft.com>
Don't use local launched_pods variable in test_rc_policy(), because
teardown() needs to use this variable to print a description of the
pods, for debugging purposes.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
This patch updates the container image for the CI test workloads:
- `k8s-layered-sc-deployment.yaml`
- `k8s-pod-sc-deployment.yaml`
- `k8s-pod-sc-nobodyupdate-deployment.yaml`
- `k8s-pod-sc-supplementalgroups-deployment.yaml`
- `k8s-policy-deployment.yaml`
Also updates unit tests:
- `test_create_container_security_context`
- `test_create_container_security_context_supplemental_groups`
This fixes tests failing due to an image pull error as the previous image is no longer available in
the container registry.
Signed-off-by: Archana Choudhary <archana1@microsoft.com>
Signed-off-by: Saul Paredes <saulparedes@microsoft.com>
This change enables cri-containerd-test for arm64.
Signed-off-by: Seunguk Shin <seunguk.shin@arm.com>
Reviewed-by: Nick Connolly <nick.connolly@arm.com>
The new version of AA allows the config not having a coco_as token
config. If not provided, it will mark as None.
Signed-off-by: Xynnn007 <xynnn@linux.alibaba.com>
After moving image pulling from kata-agent to CDH, the failed image pull
error messages have been slightly changed. This commit is to apply for
the change.
Note that in original and current image-rs implementation, both no key
or wrong key will result in a same error information.
Signed-off-by: Xynnn007 <xynnn@linux.alibaba.com>
Run the k8s tests on mariner with annotation disable_image_nvdimm=true,
to use virtio-blk instead of nvdimm for the guest rootfs block device.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
This completely eliminates the Azure secret from the repo, following the below
guidance:
https://docs.github.com/en/actions/security-for-github-actions/security-hardening-your-deployments/configuring-openid-connect-in-azure
The federated identity is scoped to the `ci` environment, meaning:
* I had to specify this environment in some YAMLs. I don't believe there's any
downside to this.
* As previously, the CI works seamlessly both from PRs and in the manual
workflow.
I also deleted the tools/packaging/kata-deploy/action folder as it doesn't seem
to be used anymore, and it contains a reference to the secret.
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
After the last commit, the initdata test on SNP should be ok. Thus we
turn on this flag for CI.
Fixes#11300
Signed-off-by: Xynnn007 <xynnn@linux.alibaba.com>
Fixed "note: Not following: ./../../../tools/packaging/guest-image/lib_se.sh:
openBinaryFile: does not exist (No such file or directory) [SC1091]"
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Although the script will inherit that setting from the caller scripts,
expliciting it in the file will vanish shellcheck "warning: Use 'pushd
... || exit' or 'pushd ... || return' in case pushd fails. [SC2164]"
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Addressed the following shellcheck advices:
SC2046 (warning): Quote this to prevent word splitting.
SC2248 (style): Prefer double quoting even when variables don't contain special characters
SC2250 (style): Prefer putting braces around variable references even when not strictly required.
SC2292 (style): Prefer [[ ]] over [ ] for tests in Bash/Ksh
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
kbs_k8s_svc_host() returns the ingress IP when the KBS service is
exposed via an ingress. In Azure AKS the ingress can time a while to be
fully ready and recently we have noticed on CI that kbs_k8s_svc_host()
has returned empty value. Maybe the problem is on current timeout being
too low, so let's increase it to 50 seconds to see if the situation
improves.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Added 'report-tests' command to gha-run.sh to print to stdout a report
of the tests executed.
For example:
```
SUMMARY (2025-02-17-14:43:53):
Pass: 0
Fail: 1
STATUSES:
not_ok foo.bats
OUTPUTS:
::group::foo.bats
1..3
not ok 1 test 1
not ok 2 test 2
ok 3 test 3
1..2
not ok 1 test 1
not ok 2 test 2
::endgroup::
```
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Currently run_kubernetes_tests.sh sends all the bats outputs to stdout
which can be very difficult to browse to find a problem, mainly on
CI. With this change, each bats execution have its output sent to
'reports/yyy-mm-dd-hh:mm:ss/<status>-<bats file>.log' where <status>
is either 'ok' (tests passed) or 'not_ok' (some tests failed).
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Now that memory hotplug should work, as we're using a firmware that
supports that, let's re-enable the tests that rely on hotplug.
Fixes: #10926, #10927
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
Guest components is now less verbose with its error messages. This will
be fixed after the release but for now switch to a more generic error
message that is still found in the logs.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
Guest components is less verbose with its error message now. This will
be fixed after the release, but for now, update the tests with the new
more general message.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
Guets components is less verbose with its error messages. This will be
fixed after the release, but for now let's replace this with a more
generic message.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
Introduce new test case to the security context bats file which verifies
that policy works properly for a deployment yaml containing fsGroup and
supplementalGroup configuration.
Signed-off-by: Cameron Baird <cameronbaird@microsoft.com>
