This adds a no-op build step to compile the CSI driver. The actual compilation
will be implemented in an ulterior PR, so as to ensure we don't break the CI.
Addresses: #10560
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
So far we were not prepared to deal with release candidates as those:
* Do not have a sha256sum in the sha256sums provided by the kernel cdn
* Come from a different URL (directly from Linus)
* Have a different suffix (.tar.gz, instead of .tar.xz)
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
This doesn't change much on how we're doing things Today, but it
simplifies a lot cases that may be added later on (and will be) like
building -rc kernels.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
By doing this we can ensure this can be re-used, if needed (and it'll be
needed), for also getting the URL.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
-f forces the (re)generaton of the config when doing the setup, which
helps a lot on local development whilst not causing any harm in the CI
builds.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
This commit introduces changes to enable testing kata-agent's container
APIs of CreateContainer/StartContainer/RemoveContainer. The changeset
include:
- using confidential-containers image-rs crate to pull/unpack/mount a
container image. Currently supports only un-authenicated registry pull
- re-factor api handlers to reduce cmdline complexity and handle
request generation logic in tool
- introduce an OCI config template for container creation
- add test case
Fixes#9707
Signed-off-by: Sumedh Alok Sharma <sumsharma@microsoft.com>
This commit introduces changes to use ubuntu for statically
building kata tools. In the existing CI setup, the tools
currently build only for x86_64 architecture.
It also fixes the build error seen for agent-ctl PR#10395.
Fixes#10441
Signed-off-by: Sumedh Alok Sharma <sumsharma@microsoft.com>
All the oras push logic happens from inside `${workdir}`, while the
root_hash.txt extraction and renaming was not taking this into
consideration.
This was not caught during the manually triggered runs as those do not
perform the oras push.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
The approach taken for now is to export MEASURED_ROOTFS=yes on the
workflow files for the architectures using confidential stuff, and leave
the "normal" build without having it set (to avoid any change of
expectation on the current bevahiour).
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Let's make sure we take the root_hashes into consideration to decide
whether the shim-v2 should or should not be used from the cached
artefacts.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Let's cache the root_hash.txt from the confidential image so we can use
them later on to decide whether there was a rootfs change that would
require shim-v2 to be rebuilt.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Let's ensure we remove the component and any extra tarball provided by
ORAS in case the cached component cannot be used.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
This adds provenance attestation logic for agent binaries that are
published to an oci registry via ORAS.
As a downstream consumer of the kata-agent binary the Peerpod project
needs to verify that the artifact has been built on kata's CI.
To create an attestation we need to know the exact digest of the oci
artifact, at the point when the artifact was pushed.
Therefore we record the full oci image as returned by oras push.
The pushing and tagging logic has been slightly reworked to make this
task less repetetive.
The oras cli accepts multiple tags separated by comma on pushes, so a
push can be performed atomically instead of iterating through tags and
pushing each individually. This removes the risk of partially successful
push operations (think: rate limits on the oci registry).
So far the provenance creation has been only enabled for agent builds on
amd64 and xs390x.
Signed-off-by: Magnus Kulke <magnuskulke@microsoft.com>
Use the configuration used by AKS (static_sandbox_resource_mgmt=true)
for CI testing on Mariner hosts.
Hopefully pod startup will become more predictable on these hosts -
e.g., by avoiding the occasional hotplug timeouts described by #10413.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
As mariner has switched to using an image instead of an initrd, let's
just drop the abiliy to build the initrd and avoid keeping something in
the tree that won't be used.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Kata CI will start testing the new rootfs-image-mariner instead of the
older rootfs-initrd-mariner image.
The "official" AKS images are moving from a rootfs-initrd-mariner
format to the rootfs-image-mariner format. Making the same change in
Kata CI is useful to keep this testing in sync with the AKS settings.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
* Clarifies instructions for k0s.
* Adds kata-deploy step for each cluster type.
* Removes the old kata-deploy-stable step for vanilla k8s.
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
As kata-cleanup will only call `reset_runtime()`, there's absolutely no
need to export the other set of environment variables in its yaml file.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
This will help to avoid code duplication on what's needed on the helm
and non-helm cases.
The reason it's not been added as part of the commit which adds the
post-delete hook is simply for helping the reviewer (as the diff would
be less readable with this change).
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Instead of using a lifecycle.preStop hook, as done when we're using
using the helm chat, let's add a post-delete hook to take care of
properly cleaning up the node during when uninstalling kata-deploy.
The reason why the lifecyle.preStop hook would never work on our case is
simply because each helm chart operation follows the Kuberentes
"declarative" approach, meaning that an operation won't wait for its
previous operation to successfully finish before being called, leading
to us trying to access content that's defined by our RBAC, in an
operation that was started before our RBAC was deleted, but having the
RBAC being deleted before the operation actually started.
Unfortunately this hook brings in some code duplicatioon, mainly related
to the RBAC parts, but that's not new as the same happens with our
deamonset.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
It's simply easier if we just use /host/opt/kata instead in our scripts,
which will simplify a lot the logic of adding an INSTALLATION_PREFIX
later on.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
As we build our binaries with the `/opt/kata` prefix, that's the value
of $dest_dir.
Later in thise series it'll become handy, as we'll introduce a way to
install the Kata Containers artefacts in a different location.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
therwise we may end up running into unexpected issues when calling the
cleanup option, as the same checks would be done, and files could end up
being copied again, overwriting the original content which was backked
up by the install option.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Neither CRI-O nor containerd requires that, and removing such symlinks
makes everything less intrusive from our side.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
It's already being used with CRi-O, let's simplify what we do and also
use this for containerd, which will allow us to do further cleanups in
the coming patches.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
For the rare cases where containerd_conf_file does not exist, cp could fail
and let the pod in Error state. Let's make it a little bit more robust.
Signed-off-by: Beraldo Leal <bleal@redhat.com>
This reverts commit 8d9bec2e01, as it
causes issues in the operator and kata-deploy itself, leading to the
node to be NotReady.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
- At the moment we aren't factoring in the kata version on our caches,
so it means that when we bump this just before release, we don't
rebuilt components that pull in the VERSION content, so the release build
ends up with incorrect versions in it's binaries
Fixes: #10092
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Adding reset_cleanup to cleanup action so that it is done automatically
without the need to run yet another DS just to reset the runtime.
This is now part of the lifecycle hook when issuing kata-deploy.sh
cleanup
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Rather then modifying the kata-depoy scripts let's use Helm and
create a values.yaml that can be used to render the final templates
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
For easier handling of kata-deploy we can leverage a Helm chart to get
rid of all the base and overlays for the various components
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
This PR removes the CI variable in kata deploy in docker script
which was supported it in jenkins environment which is not
longer being supported it.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This PR removes the CI variable from the local build makefile as
this was part of the jenkins environment which is not longer supported
it.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
