As already done for the other assets we rely on, let's build (well, pull
in this very specific case) the virtiofsd binary, as we're relying on
its standlone rust version from now on.
Fixes: #4234
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This workflow is a scheduled job that runs at 23:00
every Sunday, it should only run the main repo
but not the forked ones.
Fixes: #4219
Signed-off-by: Bin Liu <bin@hyper.sh>
Instead of only vendoring the code needed by the agent, let's ensure we
vendor all the needed rust code, and let's do it using the newly
introduced enerate_vendor.sh script.
Fixes: #3973
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
'make kata-tarball' sometimes fails early with:
cp: cannot create regular file '[...]/tools/packaging/kata-deploy/local-build/dockerbuild/install_yq.sh': File exists
This happens because all assets are built in parallel using the same
`kata-deploy-binaries-in-docker.sh` script, and thus all try to copy
the `install_yq.sh` script to the same location with the `cp` command.
This is a well known race condition that cannot be avoided without
serialization of `cp` invocations.
Move the copying of `install_yq.sh` to a separate script and ensure
it is called *before* parallel builds. Make the presence of the copy
a prerequisite for each sub-build so that they still can be triggered
individually. Update the GH release workflow to also call this script
before calling `kata-deploy-binaries-in-docker.sh`.
Fixes#3756
Signed-off-by: Greg Kurz <groug@kaod.org>
This PR updates the link for the format patch documentation for the
commit message check.
Fixes#3900
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Change the secret used by the GitHub Action that adds the PR size
label to one with the correct set of privileges.
Fixes: #3856.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
There are a few outstanding changes required to build the runtime on
Darwin.
Let's add a GitHub action to exercise build and unit tests of the
packages which we do expect to work. Eventually this should be dropped
and we can run any Darwin specific tests, or just add MacOS to the
matrix for our static check OSes.
Fixes: #3778
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Let's stop building the experimental kernel as, currently, we have
all the needed contents as part of the vanilla kernel.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This reverts commit 7a879164bd, as it's
been proved that re-triggering the checks at every single change is more
painful than having to close / re-open a PR in case we ever use the
`force-skip-ci` label again.
Fixes: #2804
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Since we are using this to exercise any changes to osbuilder or
packaging scripts, let's make sure that we only run the test in that
case.
Similarly, don't run for every single push. Just run this workflow for
pull requests.
Fixes: #3594
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Since we are already checking that only an admin is triggering the job,
let's go ahead and make sure we are testing against the PR itself. This
will ensure that we are exercising changes to kata-deploy tooling, which
is important for this test.
While at it, cleanup and simplify some of the tarball creation.
Fixes: #3586
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
The commit message of a revert commit usually generated by
`git revert`, we should consider this as legal.
Consider the commit as the merge commit if the subject
starts with 'Reject "'
Follow the pr kata-containers/tests/#3938, the suttle diffrence
is we skip all commit checks for revert commit including fixes checking
and subsystem checking. Because the commit was reverted must have passed
the check so the revert-commit should have the Fixes and Subsystem.
Fixes: #3568Fixes: kata-containers/tests#3934
Signed-off-by: Tim Zhang <tim@hyper.sh>
Weekly check(at 23:00 every Sunday) whether the docs url is ALIVE, so that
we can find the failed url in time
Fixes#815
Signed-off-by: Binbin Zhang <binbin36520@gmail.com>
Although I've done tests on my own fork using `head_ref` and those
worked, it seems those only worked as the PR was coming from exactly the
same repository as the target one.
Let's switch to base_ref, instead, which we for sure have as part of our
repo.
The downside of this is that we run the test with the last merged PR,
rather than with the "to-be-approved" PR, but that's a limitation we've
always had.
Fixes: #3482
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is needed in order to ensure that, for instance, if `force-skip-ci`
label is either added or removed later, the jobs related to the actions
will be restarted and accordingly checked.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Before this change it was only applied to the static-checks, but if
we're already taking the extreme path of skipping the CI, we better
ensure we skip all the actions and not just a few of them.
Fixes: #3471
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The action used for testing kata-deploy is entirely based on the action
used to build the kata-deploy tarball, but while the latter is able to
use the correct branch, the former always uses `main`.
This happens as the `issue_comment`, from GitHub actions, passed the
"default branch" as the GITHUB_REF.
As we're not the first ones to face such a issue, I've decided to take
one of the approaches suggested at one of the checkout's issues,
https://github.com/actions/checkout/issues/331, and take advantage of a
new action provided by the community, which will get the PR where the
comment was made, give us that ref, and that then can be used with the
checkout action, resulting on what we originally wanted.
Fixes: #3443
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's take advantage of the "is-organization-member" action and only
allow members who are part of the `kata-containers` organization to
trigger `/test_kata_deploy`.
One caveat with this approach is that for the user to be considered as
part of an organization, they **must** have their "Organization
Visibility" configured as Public (and I think the default is Private).
This was found out and suggested by @jcvenegas!
Fixes: #3130
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Commit 3c9ae7f made /test_kata_deploy run
against HEAD, but it also mistakenly removed all the checks that ensure
/test_kata_deploy only runs when explicitly called.
Mea culpa on this, and let's add the tests back.
Fixes: #3101
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Is the past few releases we ended up hitting issues that could be easily
avoided if `/test_kata_deploy` would use HEAD instead of a specific
tarball.
By the end of the day, we want to ensure kata-deploy works, but before
we cut a release we also want to ensure that the binaries used in that
release are in a good shape. If we don't do that we end up either
having to roll a release back, or to cut a second release in a really
short time (and that's time consuming).
Note: there's code duplication here that could and should be avoided,b
but I sincerely would prefer treating it in a different PR.
Fixes: #3001
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The main.yaml workflow was created and used only on 1.x. We inherited
it, but we didn't remove it after deprecating the 1.x repos.
While here, let's also update the reference to the `main.yaml` file,
and point to `release.yaml` (the file that's actually used for 2.x).
Fixes: #3033
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
According to https://endoflife.date/go golang 1.15 is not supported
anymore. Let's remove it from out tests, add 1.17.x, and bump the
newest version known to work when building kata to 1.17.3.
Fixes: #3016
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We need to explicitly call `${GOPATH}/bin/yq` that is installed by
`ci/install_yq.sh`.
Fixes: #3014
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
The `kata-agent` binaries inside the Kata Containers images provided
with release are statically linked with the GNU LGPL-2.1 licensed
libseccomp library by default.
Therefore, we attach the complete source code of the libseccomp
to the release page in order to comply with the LGPL-2.1 (6(a)).
In addition, we add the description about the libseccomp license
to the release page.
Fixes: #2922
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
This adds a step for installing libseccomp because the kata-agent
supports seccomp feature.
Fixes: #1476
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
There is a problem with slash-command-action which is on absence of a slash command
the job fails (instead of simply ignore, i.e., skip). This is documented on
https://github.com/xt0rted/slash-command-action/issues/124. There is a workaround
also documented on that issue, but here instead let's get rid of the action.
In this new implementation all comments sent to the pull request are parsed, if any
starts with "/test_kata-deploy" then the job is triggered.
Fixes#2836
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The yaml file has an indent issue from line 15.
And the branches filter should be under pull_request_target but
not the pull_request trigger.
Also actions/checkout@v2 does not need the token parameter.
Fixes: #2798
Signed-off-by: bin <bin@hyper.sh>
There's a typo in the file that should receive the output of `cargo
vendor`. We should use forward the output to `.cargo/config` instead of
`.cargo/vendor`.
This was introduced by 21c8511630.
Fixes: #2729
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
While releasing kata-containers 2.3.0-alpha1 we've hit some issues as
the tags attribution is done incorrectly. We want an array of tags to
iterate over, but the currently code is just lost is the parenthesis.
This issue was introduced in a156288c1f.
Fixes: #2725
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
When releasing a tarball, let's *also* add the "stable" & "latest" tags
to the kata-deploy image.
The "stable" tag refers to any official release, while the "latest" tag
refers to any pre-release / release candidate.
Fixes: #2302
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
As part of the release, let's also upload a tarball with the vendored
cargo code. By doing this we allow distros, which usually don't have
access to the internet while performing the builds, to just add the
vendored code as a second source, making the life of the downstream
maintainers slightly easier*.
Fixes: #1203
*: The current workflow requires the downstream maintainer to download
the tarball, unpack it, run `cargo vendor`, create the tarball, etc.
Although this doesn't look like a ridiculous amount of work, it's better
if we can have it in an automated fashion.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
The github static checks action has a section heading called "Building
rust". It doesn't actually build rust, though, just installs it with
rustup. Correct the misleading message.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
make kata-tarball is the main way to
build a kata in a single host. Lets
test it to make sure it works on every PR.
Fixes: #2416
Signed-off-by: Carlos Venegas <jose.carlos.venegas.munoz@intel.com>
- Run kata-deploy tarball generation action on every PR.
- Use kata-deploy makefile targets.
Signed-off-by: Carlos Venegas <jose.carlos.venegas.munoz@intel.com>
As quay.io is becoming our de-facto image registry, let's actually push
the kata-deploy release to it. This commit should've been part of
9fa1febfd9 but ended up slipping out.
Fixes: #2306
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
9fa1febfd9 added the support to also push
the image to quay.io. However, we didn't try explicitly pass quay.io as
the registry server, causing then to login to fail.
Fixes: #2306
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
This is not the most beautiful solution, but when do the check on every
single step we ensure the test at least started, and consequently will
succeed.
Without this the tests wouldn't even start, making any PR using the
`force-skip-ci` label not mergeable.
Fixes: #2362
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
