We need qemu-6.1 for ACPI PCI hotplug support for the q35 machine. At the
moment qemu will use SHPC hotplug under the PCIe to PCI bridge on q35.
SHPC is too slow to use for our purposes (it requires a 5s delay).
Update the qemu version to v6.1.0. This leaves the experimental version
*older* than the normal version, but we'll fix that up later.
We also need to tweak the snapcraft.yaml, since the location for configs
has changed in the new qemu version.
fixes#1691
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In snapcraft.yaml we have a case statement on $(branch) - that is on the
output of executing a command "branch". From the selections it appears
that what it actually wants is to simply select on the contents of the
$branch variable, which should be ${branch} instead.
fixes#2558
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
snap build for arm64 fail for a long time, here we enable it.
the changes:
1. correct the variable of "branch"
2. add v5.1.0 under tag_patchs
Fixes: #2194
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Removed all TOCs now that GitHub auto-generates them.
Also updated the documentation requirements doc removing the requirement
to add a TOC.
Fixes: #2022.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Use the yq installed in the env. Needed
to build kata from docker. The container builder
has not an initial Go env.
Signed-off-by: Carlos Venegas <jos.c.venegas.munoz@intel.com>
rather than removing the other line because configuration only contains
the image line ever more and this is how we already do it in tests.
Fixes: #2330
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
This causes the repository to be checked out to a version tag, which is
inconsistent with how we build runtime, and reverts us to a buggy
`snap/snapcraft.yaml`.
Fixes: #2313
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
fixed arm qemu patches dir in snap part. Clear the old `packaging/obs-packaging` path.
Fixes: #2279
Signed-off-by: wangyongchao.bj <wangyongchao.bj@inspur.com>
If you snap in an environment where you previously snapped,
`git clone`ing QEMU will fail. Remove the checkout directory.
Fixes: #2249
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
instead of image, does not require privileged containers since `losetup`
is not used and is thus more portable for various build environments.
Fixes: #2218
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
- Ported from https://github.com/kata-containers/tests/pull/3612:
Install protobuf-compiler for agent build on ppc64le & s390x
- Fixes in image target for ppc64le & s390x
- Install image instead of initrd since it's preferred
- Use Ubuntu as base since Alpine requires a musl agent (cannot be
built on ppc64le & s390x because there is no such Rust target)
- Ported from
https://github.com/kata-containers/kata-containers/pull/1265:
Fix vmlinux install path
- Install libseccomp-dev on all architectures, not just x86_64
Fixes: #2192
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
This contain to fixes for the virtiofsd on snap:
* removed the "-/usr/libexec" so that virtiofsd is copied to prime
* The configuration.toml expects virtiofsd in /usr/libexec/kata-qemu so it should be passed "kata-qemu"
to configure_hypervisor.sh script and it wil configure to install the executable onto the right directory.
Fixes#1238
Depends-on: github.com/kata-containers/kata-containers#1349
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
QEMU 5.2.0 needs ninja-build package installed on the build environment.
The default-configs were copied to $QEMU_SRC/default-configs but that does
take any effect, so instead it is now copied to $QEMU_SRC/default-configs/devices
and the configs for i386 were updated.
Also it had to change some arguments being passed to configure as Meson was failing
due inconsistent paths:
./meson.build:1:0: ERROR: The value of the 'libdir' option is '/usr/lib/qemu' which must be a subdir of the prefix '/snap/kata-containers/current/usr'.
Note that if you pass a relative path, it is assumed to be a subdir of prefix.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
kernel setup fails when `yes "n"` is used and `make oldconfig` doesn't
read anything from STDIN, `yes "n"` was added in the past as a
workaround to fix incomplete kernel configs.
Enable `build-kernel.sh` debug.
Signed-off-by: Julio Montes <julio.montes@intel.com>
`sudo` is required to build the image, once the image has been built
the permission of some directories may change, let's build first the
targerts that not need `sudo`
Signed-off-by: Julio Montes <julio.montes@intel.com>
yq major releases are not backward compatible, install the same
major version used in the CI to avoid conflics building the kata
components.
We should update yq when the CI updates it, not before.
fixes#1232
Signed-off-by: Julio Montes <julio.montes@intel.com>
This reverts commit 6cc1920c37.
Instead of updating the syntax of yq, let's use yq 3.x, otherwise
yq must be updated in the CI and the syntax updated in all the
tools (osbuilder, packging).
Signed-off-by: Julio Montes <julio.montes@intel.com>
The snap build pulls the latest release of `yq`, but `yq` version 4
changed the CLI syntax for reading a YAML file.
Update the snap config file to use the new `yq` v4 syntax.
Fixes: #1232.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Add `kata-runtime` and `kata-collect-data.sh` commands to the apps
section, these two command will be accessible through the commands
`kata-containers.runtime` and `kata-containers.collect-data`
respectively.
Henceforth the snap command for `containerd-shim-kata-v2` will be
`kata-containers.shim`
fixes#1122
Signed-off-by: Julio Montes <julio.montes@intel.com>
Use Github actions to build and release the snap package automatically
when a new tag is pushed.
fixes#1006
Signed-off-by: Julio Montes <julio.montes@intel.com>
In order to avoid `unmet dependencies` error in the CI,
the python version must be specified in the yaml.
fixes#877
Signed-off-by: Julio Montes <julio.montes@intel.com>
Somehow we are not running static checks for a long time.
And that ended up with a lot for errors.
* Ensure debug options are valid is dropped
* fix snap links
* drop extra CONTRIBUTING.md
* reference kata-pkgsync
* move CODEOWNERS to proper place
* remove extra CODE_OF_CONDUCT.md.
* fix spell checker error on Developer-Guide.md
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
In order to use a build systemd like launchpad, the snapcraft.yaml file
must be in the root directory of the project or under the `snap`
directory, that way launchpad detects that this project can be build
using the `snapcraft` command
Signed-off-by: Julio Montes <julio.montes@intel.com>
