A few pieces of the local-build tooling are supposed to be
alphabetized. Fixup a couple minor issues that have accumulated.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
Now that we have the SNP components in place, make sure that
kata-deploy knows about the qemu-snp shim so that it will be
added to containerd config.
Fixes: #6575
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
Since SEV-SNP has limited hotplug support, increase
the pod overhead to account for fixed resource usage.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
Add targets to build the "plain" x86_64 OVMF.
This will be used by anyone who is using SEV or SNP
without kernel hashes. The SNP QEMU does not yet
support kernel hashes so the OvmfPkg will be used
by default.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
Signed-off-by: Alex Carter <Alex.Carter@ibm.com>
Refactor SNP QEMU entry in versions.yaml to match
qemu-experimental and qemu-tdx-experimental.
Also, update the version of QEMU to what we are using
in CCv0. This is the non-UPM QEMU and it does not
have kernel hashes support.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
Signed-off-by: Alex Carter <Alex.Carter@ibm.com>
Add Make targets and helper functions to build the QEMU
needed for SEV-SNP.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
Signed-off-by: Alex Carter <Alex.Carter@ibm.com>
SEV requires special OVMF.
Now that we have ability to build this custom OVMF, let's optimize
it by caching so that we don't have to build it for every run.
Fixes: sev: #6572
Signed-Off-By: Unmesh Deodhar <udeodhar@amd.com>
The SEV initrd build requires kernel modules.
So, for SEV case, we need to cache kernel modules tarball in
addition to kernel tarball.
Fixes: #6572
Signed-Off-By: Unmesh Deodhar <udeodhar@amd.com>
SEV requires special OVMF to work with kernel hashes.
Thus, adding changes that builds this custom OVMF for SEV.
Fixes: #6572
Signed-Off-By: Unmesh Deodhar <udeodhar@amd.com>
We need special initrd for SEV. The work on SEV initrd is based on
Ubuntu. Thus, adding another entry in versions.yaml
This binary will have '-sev' suffix to distinguish it from the generic
binary.
Fixes: #6572
Signed-Off-By: Unmesh Deodhar <udeodhar@amd.com>
- D-Bus enabling now occurs only in setup_rootfs (instead of
prepare_overlay and setup_rootfs)
- Adjust permissions of / so dbus-broker will be able to traverse FS
These changes enables kata-agent to successfully communicate with D-Bus.
Fixes#6677
Signed-off-by: Vladimir <amigo.elite@gmail.com>
Last but not least add the continerd shim configuration
pointing to the correct configuration-<shim>.toml
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
With each release make sure we ship a GPU and TEE enabled kernel
This adds tdx-experimental kernel support
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
TDVF caching is not working as the tarball name is incorrect. The result
expected is kata-static-tdvf.tar.xz, but it's looking for
kata-static-tdx.tar.xz.
This happens as a logic to convert tdx -> tdvf has been added as part of
the building scripts, but I missed doing this as part of the caching
scripts.
Fixes: #6669
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
TDX QEMU caching is not working as expected, as we're checking for its
version looking at "assets.hypervisor.${QEMU_FLAVOUR}.version", which is
correct for standard QEMU. However, for TDX QEMU we should be checking
for "assets.hypervisor.${QEMU_FLAVOUR}.tag"
Fixes: #6668
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The agent now offloads cgroup configuration to systemd when
possible. This requires to enable D-Bus in order to communicate
with systemd.
Fixes#6657
Signed-off-by: Greg Kurz <groug@kaod.org>
Let's ensure the node is ready after the CRI Engine restart, otherwise
we may proceed and scripts may simply fail if they try to deploy a pod
while the CRI Engine is not yet restarted (and, consequently, the node
is not Ready).
Related: #6649
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
readinessProbe will help us to only have the kata-deploy pod marked as
Ready when it finishes all the needed configurations in the node.
Related: #6649
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As TEEs cannot hotplug memory / CPU, we *must* consider the default
values for those as part of the podOverhead.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
If conf_guest is set we need to update the CONFIG_LOCALVERSION
to match the suffix created in install_kata
-nvidia-gpu-{snp|tdx}, the linux headers will be named the very
same if build with make deb-pkg for TDX or SNP.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Let's make sure we configure containerd for the kata-qemu-tdx handler
and ship the kata-qemu-tdx runtime class for kubernetes.
Fixes: #6537
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the ability to cache OVMF, which right now we're only building
and shipping it for TDX.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed targets and modifications to be able to build
OVMF for TDX as part of the local-build scripts.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's update the OVMF for TDX version to what's the latest tested
release of the Intel TDX tools with Kata Containers.
This change requires a newer version of `nasm` than the one provided by
the container used to build the project. This change will also be
needed for SEV-SNP and was originally done by Alex Carter (thanks!).
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Alex Carter <Alex.Carter@ibm.com>
As we'll be using this from different places in the near future, let's
create a helper function as part of the libs.sh.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's make users aware of the cache_components_main.sh that they can
also cache the kernel-tdx-experimental builds.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed targets and modifications to be able to build
kernel-tdx-experimental as part of the local-build scripts.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's create a `install_kernel_helper()` function, as it was already
done for QEMU, and rely on that when calling `install_kernel` and
`install_kernel_dragonball_experimental`.
This helps us to reduce the code duplication by a fair amount.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's update the Kernel TDX version to what's the latest tested release
of the Intel TDX tools with Kata Containers.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's do what we already did when caching the kernel, and allow passing
a FLAVOUR of the project to build.
By doing this we can re-use the same function used to cache QEMU to also
cache any kind of experimental QEMU that we may happen to have.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed targets and modifications to be able to build
qemu-tdx-experimental as part of the local-build scripts.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's make sure the `qemu_suffix` and `qemu_tarball_name` can be
specified. With this we make it really easy to reuse this script for
any addition flavour of an experimental QEMU that ends up having to be
built (specifically looking at the ones for Confidential Containers
here).
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's update the QEMU TDX version to what's the latest tested release of
the Intel TDX tools with Kata Containers.
In order to do such update, we had to relax the checks on the QEMU
version for some of the configuration options, as those were removed
right after the window was open for the 7.1.0 development (thus the
7.0.50 check).
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As the dragonball kernel is shipped as part of our releases, it must be
added to the `all` target.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
In order to make it easier to read, let's just rename the
install_dragonball_experimental_kernel and install_experimental_kernel
to install_kernel_dragonball_experimental and
install_kernel_experimental, respectively.
This allows us to quickly get to those functions when looking for
`install_kernel`.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's just print "to the registry" instead of printing "to quay.io", as
the registry used is not tied to quay.io.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Two different kernel build targets (build,install) have both instructions to
build the kernel, hence it was executed twice. Install should only do
install and build should only do build.
Fixes: #6588
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Add osbuilder support to build a rootfs and image
based on the CBL-Mariner Linux distro
Fixes: #6462
Signed-off-by: Dallas Delaney <dadelan@microsoft.com>
The kata-deploy install method tried to `chmod +x /opt/kata/runtime-rs/bin/*` but it isn't
always true that /opt/kata/runtime-rs/bin/ exists. For example, the
s390x payload does not build the kernel-dragonball-experimental
artifacts. So let's ensure the dir exist before issuing the command.
Fixes#6494
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The function is returning "" when called from the script used to cache
the artefacts and one difference noted between this version and the
already working one from the CCv0 is that we make sure to `pushd
${repo_root_dir}` in the CCv0 version.
Let's give it a try here and see if it solves the issue.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As we've added the support for caching components, let's use them
whenever those are available.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching VirtioFS artefacts that are generated using
the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching shim v2 artefacts that are generated using
the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching RootFS artefacts that are generated using
the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching QEMU artefacts that are generated using
the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching Nydus artefacts that are generated using
the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching Kernel artefacts that are generated using
the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching Firecracker artefacts that are generated
using the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's add support for caching Cloud Hypervisor artefacts that are
generated using the kata-deploy local-build scripts.
Right now those are not used, but we'll switch to using them very soon
as part of upcoming changes of how we build the components we test in
our CI.
Fixes: #6480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Let's adjust the kernel names in versions.yaml so those can match the
names used as part of the kata-deploy local build scripts.
Right now this doesn't bring any benefit nor drawback, but it'll make
our life easier later on in this same series.
Depends-on: github.com/kata-containers/tests#5534
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The last remaining user of the TRAVIS variable in this repo is
tools/osbuilder/tests and it is only used to skip spinning up VMs. Travis
didn't support virtualization and the same is true for github actions hosted
runners. Replace the variable with KVM_MISSING and determine availability of
/dev/kvm at runtime.
TRAVIS is also used by '.ci/setup.sh' in kata-containers/tests to reduce the
set of dependencies that gets installed, but this is also in the process of
being removed.
Fixes: #3544
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
There's no need to pass repo_root_dir to get_last_modification() as the
variable used everywhere is exported from that very same file.
Fixes: #6431
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is used in several parts of the code, and can have a single
declaration as part of the `lib.sh` file, which is already imported by
all the places where it's used.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Now that we've switched the base container image to using Ubuntu instead
of CentOS, we don't need any kind of extra logic to correctly build the
image for different architectures, as Ubuntu is a multi-arch image that
supports all the architectures we're targetting.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's make sure we use a multi-arch image for building kata-deploy.
A few changes were also added in order to get systemd working inside the
kata-deploy image, due to the switch from CentOS to Ubuntu.
Fixes: #6358
Signed-off-by: SinghWang <wangxin_0611@126.com>
As part of bd1ed26c8d, we've pointed to
the Dockerfile that's used in the CC branch, which is wrong.
For what we're doing on main, we should be pointing to the one under the
`kata-deploy` folder, and not the one under the non-existent
`kata-deploy-cc` one.
Fixes: #6343
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As the image provided as part of registry.centos.org is not a multi-arch
one, at least not for CentOS 7, we need to expand the script used to
build the image to pass images that are known to work for s390x (ClefOS)
and aarch64 (CentOS, but coming from dockerhub).
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's break the IMAGE build parameter into BASE_IMAGE_NAME and
BASE_IMAGE_TAG, as it makes it easier to replace the default CentOS
image by something else.
Spoiler alert, the default CentOS image is **not** multi-arch, and we do
want to support at least aarch64 and s390x in the near term future.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
For the architectures we know that `make kata-tarball` works as
expected, let's start publishing the kata-deploy payload after each
merge.
This will help to:
* Easily test the content of current `main` or `stable-*` branch
* Easily bisect issues
* Start providing some sort of CI/CD content pipeline for those who
need that
This is a forward-port work from the `CCv0` and groups together patches
that I've worked on, with the work that Choi did in order to support
different architectures.
Fixes: #6343
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Adding kernel config to sev case since it is needed for SNP and SNP will use the SEV kernel.
Incrementing kernel config version to reflect changes
Fixes: #6123
Signed-off-by: Alex Carter <Alex.Carter@ibm.com>
Following Jong Wu suggestion, let's link /usr/bin/musl-gcc to
/usr/bin/aarch64-linux-musl-gcc.
Fixes: #6320
Signed-off-by: SinghWang <wangxin_0611@126.com>
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This reverts commit 9d78bf9086.
Golang binaries are built statically by default, unless linking against
CGO, which we do. In this case we dynamically link against glibc,
causing us troubles when running a binary built with Ubuntu 22.04 on
Ubuntu 20.04 (which will still be supported for the next few years ...)
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
When starting an initrd the kernel expects to find /dev/console in the initrd,
so that it can connect it as stdin/stdout/stderr to the /init process. If the
device node is missing the kernel will complain that it was unable to open an
initial console. If kata-agent is the initrd init process, it will also result
in log messages not being logged to console and thus not forwarded to host
syslog.
Add a set of standard device nodes for completeness, so that console logging
works. To do that we install the makedev packge which provides a MAKEDEV helper
that knows the major/minor numbers. Unfortunately the debian package tries to
create devnodes from postinst, which can be suppressed if systemd-detect-virt
is present. That's why we create a small dummy script that matches what
systemd-detect-virt would output (anything is enough to suppress mknod).
Fixes: #6261
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
Let's bump the base container image to use the 22.04 version of Ubuntu,
as it does bring up-to-date package dependencies that we need to
statically build the runtime-rs on aarch64.
Fixes: #6320
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This, combined with the effort of caching builder images *and* only
performing the build itself inside the builder images, is the very first
step for reproducible builds for the project.
Reproducible builds are quite important when we talk about Confidential
Containers, as users may want to verify the content used / provided by
the CSPs, and this is the first step towards that direction.
Fixes: #5517
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder image for the td-shim.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder image for the td-shim.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for building and pushing the OVMF builder
image to the Kata Containers' quay.io registry.
Fixes: #5477
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of buildinf our
own, to be used as a builder image for OVMF.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the QEMU
builder image to the Kata Containers' quay.io registry.
Fixes: #5481
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existsing image, instead of building our
own, to be used as a builder image for QEMU.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the virtiofsd
builder image to the Kata Containers' quay.io registry.
Fixes: #5480
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder image for the virtiofsd.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's ensure we're building virtiofsd with a specific toolchain that's
known to not cause any issues, instead of always using the latest one.
On each bump of the virtiofsd, we'll make sure to adjust this according
to what's been used by the virtiofsd community.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the shim-v2
builder image to the Kata Containers' quay.io registry.
Fixes: #5478
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's try to pull a pre-existing image, instead of building our own, to
be used as a builder for the shim-v2.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the needed infra for only building and pushing the kernel
builder image to the Kata Containers' quay.io registry.
Fixes: #5476
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's first try to pull a pre-existing image, instead of building our
own, to be used as a builder image for the kernel.
This will save us some CI time.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This function will push a specific tag to a registry, whenever the
PUSH_TO_REGISTRY environment variable is set, otherwise it's a no-op.
This will be used in the future to avoid replicating that logic in every
builder used by the kata-deploy scripts.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add a function to get the hash of the last commit modifying a
specific file.
This will help to avoid writing `git rev-list ...` into every single
build script used by the kata-deploy.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
BUILD_REGISTRY, which points to quay.io/kata-containers/builder, will be
used for storing the builder images used to build the artefacts via the
kata-deploy scripts.
The plan is to tag, whenever it's possible and makes sense, images like:
* ${BUILDER_REGISTRY}:${component}-${unique_identifier}
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
In the `install_go_rust.sh` file we're adding a
x86_64-unknown-linux-musl target unconditionally. That should be,
instead, based in the ARCH of the host and the appropriate LIBC to be
used with that host.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's not try to sed a file that doesn't exist, which may be the case
depending on the architecture we're building the shim-v2 for.
This is a partial-forward port of
f24c47ea47.
Fixes: #6293
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is to install a missing binary protoc in shim-v2 Dockerfile.
Fixes: #6244
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
(cherry picked from commit 10603e3def)
For kata containers, rootfs is used in the read-only way.
EROFS can noticably decrease metadata overhead.
On the basis of supporting the EROFS file system, it supports using the config parameter to switch the file system used by rootfs.
Fixes: #6063
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: yaoyinnan <yaoyinnan@foxmail.com>
We already have verbose output while merging the builds from various
build targets. Getting rid of verbose output to speed up.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
The .dracut_rootfs.done file is accidentally being picked up as the default
target, regardless of BUILD_METHOD. Move the 'all' target definition up, so
that it's the default (=first) target in the makefile. Additionally make the
.dracut_rootfs.done target conditional on the right BUILD_METHOD being
selected, as building it doesn't make sense with BUILD_METHOD=distro.
Fixes: #6235
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
This is to make a docker version to v20.10 in docker upstream image ubuntu:20.04 for s390x and ppc64le.
Fixes: #6211
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Update Readme to instruct users to increment the kata config version
for any changes made to configs or patches under packaging/kernel.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
link-self-contained is not supported on ppc64le rust target.
Hence, do not pass it while building virtiofsd.
Fixes: #6195
Signed-off-by: Amulyam24 <amulmek1@in.ibm.com>
As Chao Wu added the support for building the dragonball kernel as a new
experimental kernel, let's make sure we reflect that as part of the
kata-deploy build scripts.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As QEMU released its v7.2.0 version in December last year, last do the
bump on our side.
A few configuration options have been removed between the v6.2.0 (the
version we currently use) and v7.2.0, so those have also been dropped
from our configure-hypervison.sh script (for this specific version).
Also, we're explicitly setting --disable-virtiofsd for the platforms
that we're testing using the rust version.
See: a8d6abe129/docs/about/deprecated.rst (virtiofsd)Fixes: #6102
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This PR fixes the indentation for setup aks script being used
in tools.
Fixes#6013
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Add some new ignore items to avoid local builds that cause git to track a lot of files
Fixes: #5900
Signed-off-by: Binbin Zhang <binbin36520@gmail.com>
In order to let upcall being used by Kata Container, we need to add
those patches into kernel build script.
Currently, only when experimental (-e) and hypervisor type dragonball
(-t dragonball) are both enabled, that the upcall patches will be
applied to build a 5.10 guest kernel.
example commands: sh ./build-kernel.sh -e -t dragonball -d setup
fixes: #5642
Signed-off-by: Chao Wu <chaowu@linux.alibaba.com>
Upcall is a direct communication tool between VMM and guest developed
upon vsock. The server side of the upcall is a driver in guest kernel
(kernel patches are needed for this feature) and it'll start to serve
the requests after the kernel starts. And the client side is in
Dragonball VMM , it'll be a thread that communicates with vsock through
uds.
We want to keep the lightweight of the VM through the implementation of
the upcall, through which we could achieve vCPU hotplug, virtio-mmio
hotplug without implementing complex and heavy virtualization features
such as ACPI virtualization.
fixes: #5642
Signed-off-by: Chao Wu <chaowu@linux.alibaba.com>
If a pod of kata is deployed on a machine, after the machine restarts, the pod status of kata-deploy will be CrashLoopBackOff.
Fixes: #5868
Signed-off-by: SinghWang <wangxin_0611@126.com>
For now, rng init is too slow for kata3.0/dragonball. Enable
random_trust_cpu can speed up rng init when kernel boot.
Fixes: #5870
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Create a guest image to support SELinux for containers inside the guest
if `SELINUX=yes` is specified. This works only if the guest rootfs is
CentOS and the init service is systemd, not the agent init. To enable
labeling the guest image on the host, selinuxfs must be mounted on the
host. The kata-agent will be labeled as `container_runtime_exec_t` type.
Fixes: #4812
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
Add kernel configs related to SELinux in order to add the
support for containers running inside the guest.
Fixes: #4812
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
This PR removes extra tab spaces from the kata deploy binaries
script.
Fixes#5747
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
CONFIG_X86_SGX is introduced after kernel 5.11, and that config is a
default x86_64 config for Kata build-kernel.sh script.
But if we use -v to specify any kernel version below 5.11 will cause an
inevitable error because CONFIG_X86_SGX is not supported in older
kernels and that may cause problem for the situation if we need kernel
version below 5.11.
So I propose to put CONFIG_X86_SGX into whitelist.conf to avoid break
building guest kernel below 5.11.
fixes: #5741
Signed-off-by: Chao Wu <chaowu@linux.alibaba.com>
This PR fixes the indentation of the build static firecracker script.
Fixes#5663
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This Pr removes single spaces and fix the indentation of the script.
Fixes#5630
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
This Pr removes single spaces and fix the indentation of the script.
Fixes#5528
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
The compile option link-self-contained=yes asks rustc to use
C library startup object files that come with the compiler,
which are not available on the target s390x-unknown-linux-gnu.
A build does not contain any startup files leading to a
broken executable entry point (causing segmentation fault).
Fixes: #5522
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
1. Implemented a rust module for operating cgroups through systemd with the help of zbus (src/agent/rustjail/src/cgroups/systemd).
2. Add support for optional cgroup configuration through fs and systemd at agent (src/agent/rustjail/src/container.rs).
3. Described the usage and supported properties of the agent systemd cgroup (docs/design/agent-systemd-cgroup.md).
Fixes: #4336
Signed-off-by: Yuan-Zhuo <yuanzhuo0118@outlook.com>
Differently than every single other bit that's part of our repo, QEMU
has been using a single Dockerfile that prepares an environment where
the project can be built, but *also* building the project as part of
that very same Dockerfile.
This is a problem, for several different reasons, including:
* It's very hard to have a reproducible build if you don't have an
archived image of the builder
* One cannot cache / ipload the image of the builder, as that contains
already a specific version of QEMU
* Every single CI run we end up building the builder image, which
includes building dependencies (such as liburing)
Let's split the logic into a new build script, and pass the build script
to be executed inside the builder image, which will be only responsible
for providing an environment where QEMU can be built.
Fixes: #5464
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
When moving to building the CI artefacts using the kata-deploy scripts,
we've noticed that the build would fail on any machine where the tarball
wasn't officially provided.
This happens as rust is missing from the 1st layer container. However,
it's a very common practice to leave the 1st layer container with the
minimum possible dependencies and install whatever is needed for
building a specific component in a 2nd layer container, which virtiofsd
never had.
In this commit we introduce the second layer containers (yes,
comtainers), one for building virtiofsd using musl, and one for building
virtiofsd using glibc. The reason for taking this approach was to
actually simplify the scripts and avoid building the dependencies
(libseccomp, libcap-ng) using musl libc.
Fixes: #5425
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The previously used repo will be removed by Intel, as done with the one
used for TDX kernel. The TDX team has already worked on providing the
patches that were hosted atop of the QEMU commit with the following hash
4c127fdbe81d66e7cafed90908d0fd1f6f2a6cd0 as a tarball in the
https://github.com/intel/tdx-tools repo, see
https://github.com/intel/tdx-tools/pull/162.
On the Kata Containers side, in order to simplify the process and to
avoid adding hundreds of patches to our repo, we've revived the
https://github.com/kata-containers/qemu repo, and created a branch and a
tag with those hundreds of patches atop of the QEMU commit hash
4c127fdbe81d66e7cafed90908d0fd1f6f2a6cd0. The branch is called
4c127fdbe81d66e7cafed90908d0fd1f6f2a6cd0-plus-TDX-v3.1 and the tag is
called TDX-v3.1.
Knowing the whole background, let's switch the repo we're getting the
TDX QEMU from.
Fixes: #5419
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The previously used repo has been removed by Intel. As this happened,
the TDX team worked on providing the patches that were hosted atop of
the v5.15 kernel as a tarball present in the
https://github.com/intel/tdx-tools repos, see
https://github.com/intel/tdx-tools/pull/161.
On the Kata Containers side, in order to simplify the process and to
avoid adding ~1400 kernel patches to our repo, we've revived the
https://github.com/kata-containers/linux repo, and created a branch and
a tag with those ~1400 patches atop of the v5.15. The branch is called
v5.15-plus-TDX, and the tag is called 5.15-plus-TDX (in order to avoid
having to change how the kernel builder script deals with versioning).
Knowing the whole background, let's switch the repo we're getting the
TDX kernel from.
Fixes: #5326
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
In order to ensure that the proxy configuration is passed to the 2nd
layer container, let's ensure the $HOME/.docker/config.json file is
exposed inside the 1st layer container.
For some reason which I still don't fully understand exporting
https_proxy / http_proxy / no_proxy was not enough to get those
variables exported to the 2nd layer container.
In this commit we're creating a "$HOME/.docker" directory, and removing
it after the build, in case it doesn't exist yet. The reason we do this
is to avoid docker not running in case "$HOME/.docker" doesn't exist.
This was not tested with podman, but if there's an issue with podman,
the issue was already there beforehand and should be treated as a
different problem than the one addressed in this commit.
Fixes: #5077
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Shell expands `*"rc"*` to the top-level `src` directory. This results
in comparing a version with a directory name. This doesn't make sense
and causes the script to choose the wrong branch of the `if`.
The intent of the check is actually to detect `rc` in the version.
Fixes: #5283
Signed-off-by: Greg Kurz <groug@kaod.org>
To avoid the random failures when we are building the rootfs as it seems
that it does not find the value for the libseccomp and gperf directory,
this PR export these variables.
Fixes#5232
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As 3.0.0-rc0 has been released, let's switch the kata-deploy / kata-cleanup
tags back to "latest", and re-add the kata-deploy-stable and the
kata-cleanup-stable files.
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
Developer-Guide.md is updated to work using current golang versions.
Related Readmes are also updated.
Signed-off-by: Joana Pecholt <joana.pecholt@aisec.fraunhofer.de>
kata-deploy files must be adapted to a new release. The cases where it
happens are when the release goes from -> to:
* main -> stable:
* kata-deploy-stable / kata-cleanup-stable: are removed
* stable -> stable:
* kata-deploy / kata-cleanup: bump the release to the new one.
There are no changes when doing an alpha release, as the files on the
"main" branch always point to the "latest" and "stable" tags.
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
In the commit 54d6d01754 we ended up
removing the BUILD_SUFFIX argument passed to QEMU as it only seemed to
be used to generate the HYPERVISOR_NAME and PKGVERSION, which were added
as arguments to the dockerfile.
However, it turns out BUILD_SUFFIX is used by the `qemu-build-post.sh`
script, so it can rename the QEMU binary accordingly.
Let's just bring it back.
Fixes: #5078
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Dockerfile cannot decipher multiple conditional statements in the main RUN call.
Cannot segregate statements in Dockerfile with '{}' braces without wrapping entire statement in 'bash -c' statement.
Dockerfile does not support setting variables by bash command.
Must set HYPERVISOR_NAME and PKGVERSION from parent script: build-base-qemu.sh
Fixes: #5078
Signed-Off-By: Ryan Savino <ryan.savino@amd.com>
00aadfe20a introduced a regression on
`make cc-tdx-kernel-tarball` as we stopped passing all the needed
information to the `build-kernel.sh` script, leading to requiring `yq`
installed in the container used to build the kernel.
This commit partially reverts the faulty one, rewritting it in a way the
old behaviour is brought back, without changing the behaviour that was
added by the faulty commit.
Fixes: #5043
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This removes two options that are not needed (any longer). These
are not set for any kernel so they do not need to be ignored either.
Fixes#5035
Signed-off-by: Joana Pecholt <joana.pecholt@aisec.fraunhofer.de>
Guest log is showing a hang on systemd getty start.
Adding symlink for /dev/ttyS0 resolves issue.
Fixes: #4932
Signed-Off-By: Ryan Savino <ryan.savino@amd.com>
