Switch to use function from Kata repo in common.bash to reduce
dependency on the tests repo.
Fixes#8713
Signed-off-by: Chelsea Mafrica <chelsea.e.mafrica@intel.com>
Add implementations for the following `Hypervisor` trait methods which
simply return the same details as the `get_vmm_master_tid()` method:
- `get_thread_ids()`
- `get_pids()`
Fixes: #6438.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
This reverts commit ee5fa08a27.
This is perfectly fine to do as we narrwoed down the issue to be on the
version of `jq` provided by alpine, and we've already updated it in the
previous commit (in this very same series).
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
`jq` coming from alpine is in its 1.6 version, and that has a bug that
hits us quite hard, as it changes a float to an int whenever the number
is in the `x.0` format.
One example is:
```bash
/ # jq --version
jq-1.6
/ # echo '{"foo": 1.0}' | jq .foo
1
```
With this in mind, let's switch, at least for now, to using the `jq`
released directly on github, as it does address the issue we've been
hitting.
```bash
⋊> Downloads ./jq-linux-amd64 --version
jq-1.7
⋊> Downloads echo '{"foo": 1.0}' | jq .foo
1.0
```
Fixes: #8678
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
After kata-deploy has installed, check that the worker nodes
are still in Ready state and don't have a containerd://Unknown
container runtime versions, identicating that container isn't working
to ensure that we didn't corrupt the containerd config during kata-deploy's edits
Fixes: #8678
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
To become more resilient against these kinds of errors:
deployment.apps/confidential-unencrypted created
pod/confidential-unencrypted-c5fdd6964-rrb6q condition met
ssh: connect to host 10.42.0.109 port 22: Connection refused
Fixes: #8687
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
This is to reintroduce a configuration rule for IBM Z Secure Execution,
where no initrd path should be configured. For the TEE of interest,
only a kernel image should be specified with `confidential_guest=true`.
Fixes: #8692
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
`make SUPPORT_VIRTUALIZATION=1 test` iterates through all subcrates and
does test.
Plus, this patch fixes some issues about unit tests:
- Feed too much parameters to `I8042Device::new()`.
- Virtqueue checks have been introduced since `virtio-queue v0.7.0`.
- GHA might have no access to `/var/tmp` dir on runner.
Fixes: #8690
Signed-off-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
This PR fixes the indentation of the confidential common
script for kubernetes tests.
Fixes#8698
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
As a follow-up for #8516, guest_cid and vhost_fd are not necessarily initialised
via new(). Instead, the fields should be initialised later when they are really
used to construct hypervisor's parameters.
This commit is to separate init_config() from new() to initialise guest_cid
and vhost_fd and leave only the assignment of id for the existing function.
Fixes: #8671
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
We now use the static checks script from the main kata containers repo
and not the tests repo; update documentation to reflect this.
Fixes#8681
Signed-off-by: Chelsea Mafrica <chelsea.e.mafrica@intel.com>
Change the two functions in lib.sh to use the static checks script from
the kata containers repo instead of tests. Remove cloning the repo from
these functions since we don't need it anymore. Leave these two
functions because the document checking one may be used locally and the
static checks one is called from the virtcontainers Makefile.
Fixes#8681
Signed-off-by: Chelsea Mafrica <chelsea.e.mafrica@intel.com>
If a PR contains files from the ignore-paths, these actions do not run
as intended. However, the actions are make as required. And there does
not seem to be a way to mark these as non-required in that case.
As a result a PR containing the files from the ignore-paths remains
stalled.
Hence remove the ignore-paths until github provides a way to mark
actions that are skipped due to ignore-paths as non-required/passed.
Fixes: #8663
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Update the Speed & Density metric tests baseline for StratoVirt
and re-enable them, and skip other metric tests temporarily.
Fixes: #8656
Signed-off-by: Liu Wenyuan <liuwenyuan9@huawei.com>
fix error when running checks and tests:
error: failed to run custom build command for `devicemapper-sys v0.1.5`
fatal error: 'libdevmapper.h' file not found
thread 'main' panicked at 'Could not generate dm.h bindings:
ClangDiagnostic("dm.h:2:10: fatal error: 'libdevmapper.h' file not found\n")',
/home/runner/.cargo/registry/src/index.crates.io-6f17d22bba15001f/devicemapper-sys-0.1.5/build.rs:24:10
stack backtrace:
0: rust_begin_unwind
at /rustc/5680fa18feaa87f3ff04063800aec256c3d4b4be/library/std/src/panicking.rs:593:5
1: core::panicking::panic_fmt
at /rustc/5680fa18feaa87f3ff04063800aec256c3d4b4be/library/core/src/panicking.rs:67:14
2: core::result::unwrap_failed
at /rustc/5680fa18feaa87f3ff04063800aec256c3d4b4be/library/core/src/result.rs:1651:5
3: core::result::Result<T,E>::expect
4: build_script_build::main
5: core::ops::function::FnOnce::call_once
note: Some details are omitted, run with `RUST_BACKTRACE=full` for a verbose backtrace.
warning: build failed, waiting for other jobs to finish...
make: *** [../../utils.mk:177: standard_rust_check] Error 101
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
Fix error when making checks:
```
error: failed to run custom build command for `image-rs v0.1.0
(https://github.com/confidential-containers/guest-components?tag=v0.8.0#e849dc89)`
Caused by:
process didn't exit successfully: `/home/runner/work/kata-containers/kata-containers/src/
agent/target/release/build/image-rs-fd932206d09362b7/build-script-build` (exit status: 101)
--- stdout
cargo:rerun-if-changed=./protos/getresource.proto
cargo:rerun-if-changed=./protos
--- stderr
thread 'main' panicked at 'Could not find `protoc` installation and this build crate cannot proceed without
this knowledge. If `protoc` is installed and this crate had trouble finding
it, you can set the `PROTOC` environment variable with the specific path to your
installed `protoc` binary.If you're on debian, try `apt-get install protobuf-compiler`
or download it from https://github.com/protocolbuffers/protobuf/releases
```
Fixes#8673
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
We use a matching direct-volume path to determine whether an OCI mount
is a DirectVolume. However, we should handle the case where no match is
found appropriately.
This error will be defined as a non-DirectVolume type when judging the
OCI mount but not failed.
Fixes: #8619
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
DirectVolume structure in runtime-rs is different from it in kata-runtime,
which causes they has no unified handling method for DirectVolumeMountInfo
and MountInfo.
We should align the two by simply adding the attribute #[serde(rename="x")
to each field in DirectVolumeMountInfo
Fixes: #8619
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
