Install luks-encrypt-storage script by guest-components. So that we can maintain a single source and prevent synchronization issues.
Fixes: #10173 -- part I
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
Let's ensure at least 50% of the memory is used for /run, as systemd by
default forces it to be 10%, which is way too small even for very small
workloads.
This is only done for the rootfs-confidential image.
Fixes: kata-containers#6775
Signed-off-by: Alex Carter <Alex.Carter@ibm.com>
Signed-off-by: Wang, Arron <arron.wang@intel.com>
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.co
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
For the GPU build we need go/rust and some other helpers
to build the rootfs.
Always use versions.yaml for the correct and working Rust and golang
version
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
This PR removes the CI variable which is not longer being used or valid
in the kata containers repository. The CI variable was used when we
were using jenkins and scripts setups which are not longer supported.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
For docker-based builds only install Rust when necessary.
Further, execute the detect Rust version check only when
intending to install Rust.
As of today, this is the case when we intend to build the
agent during rootfs build.
Signed-off-by: Manuel Huber <mahuber@microsoft.com>
As part of archiving the tests repo, we are eliminating the dependency on
`clone_tests_repo()`. The scripts using the function is as follows:
- `ci/install_rust.sh`.
- `ci/setup.sh`
- `ci/lib.sh`
This commit removes or replaces the files, and makes an adjustment accordingly.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
This will help us to debug issues in the future (and would have helped
in the past as well). :-)
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Since OPA binary was replaced by the regorus crate, we can finally stop
building and shipping the binary.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The commit is to make the OPA build from source working in `ubuntu-rootfs-osbuilder`.
To achieve the goal, the configuration is changed as follows:
- Switch the make target to `ci-build-linux-static` not triggering docker-in-docker build
- Install go in the builder image for s390x and ppc64le
Fixes: #9466
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Add "guest-pull" feature option to determine that the related dependencies
would be compiled if the feature is enabled.
By default, agent would be built with default-pull feature, which would
support all pull types, including sharing images by virtio-fs and
pulling images in the guest.
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
We were never passing the arguments to add the PAUSE_IMAGE to the
rootfs, leading to it never being present in the confidential image /
initrd.
Fixes: #9032 -- part II
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This env ver will serve us to pass the pause image tarball to the rootfs builder, which will then just
unpack the content into the rootfs.
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
Co-authored-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Co-authored-by: Wang, Arron <arron.wang@intel.com>
Co-authored-by: stevenhorsman <steven@uk.ibm.com>
Co-authored-by: Jakob Naucke <jakob.naucke@ibm.com>
This is required as the tdx-attest-rs crate, which is used as part of
the guest components, has a runtime dependency on libattest-tdx.
Fixes: #9021 -- part II
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This will make our lives easier to figure out whether the components are
being installed or not.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We need to pass this to the container where the rootfs is built, so it
can actually be unpacked inside the rootfs.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We need to actually check that the env var is not empty. :-)
This was introduced by 8307718842.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This env ver will serve us to pass the Confidential Containers
guest-components tarball to the rootfs builder, which will then just
unpack the content into the rootfs.
Fixes: #8848 -- part I
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Linda Yu <linda.yu@intel.com>
Co-authored-by: stevenhorsman <steven@uk.ibm.com>
Co-authored-by: Jakob Naucke <jakob.naucke@ibm.com>
Co-authored-by: Wang, Arron <arron.wang@intel.com>
Co-authored-by: zhouliang121 <liang.a.zhou@linux.alibaba.com>
Co-authored-by: Alex Carter <alex.carter@ibm.com>
Co-authored-by: Suraj Deshmukh <suraj.deshmukh@microsoft.com>
Co-authored-by: Xynnn007 <xynnn@linux.alibaba.com>
This env var will serve us to pass the agent tarball to the rootfs
builder, which will then just unpack the content into the rootfs instead
of building the agent again.
AGENT_TARBALL and AGENT_SOURCE_BIN should never be used together.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The versions.yaml has a default for the amd64 binary, but there is no
code to actually build the arm64 binary, which seems an overlook.
Let's simplify the OPA logic by removing the direct link to the binary,
and construct that link as part of the checks we do to decide whether we
need to build OPA or not.
Fixes: #8373
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
When building with AGENT_POLICY=yes and AGENT_INIT=yes:
1. Include OPA and the Policy settings in rootfs.
2. Start OPA from the kata agent.
Before these changes, building with both AGENT_POLICY=yes and
AGENT_INIT=yes was unsupported.
Starting OPA from systemd (when AGENT_INIT=no) was already supported.
Fixes: #7615
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Fixes: #7573
To enable this feature, build your rootfs using AGENT_POLICY=yes. The
default is AGENT_POLICY=no.
Building rootfs using AGENT_POLICY=yes has the following effects:
1. The kata-opa service gets included in the Guest image.
2. The agent gets built using AGENT_POLICY=yes.
After this patch, the shim calls SetPolicy if and only if a Policy
annotation is attached to the sandbox/pod. When creating a sandbox/pod
that doesn't have an attached Policy annotation:
1. If the agent was built using AGENT_POLICY=yes, the new sandbox uses
the default agent settings, that might include a default Policy too.
2. If the agent was built using AGENT_POLICY=no, the new sandbox is
executed the same way as before this patch.
Any SetPolicy calls from the shim to the agent fail if the agent was
built using AGENT_POLICY=no.
If the agent was built using AGENT_POLICY=yes:
1. The agent reads the contents of a default policy file during sandbox
start-up.
2. The agent then connects to the OPA service on localhost and sends
the default policy to OPA.
3. If the shim calls SetPolicy:
a. The agent checks if SetPolicy is allowed by the current
policy (the current policy is typically the default policy
mentioned above).
b. If SetPolicy is allowed, the agent deletes the current policy
from OPA and replaces it with the new policy it received from
the shim.
A typical new policy from the shim doesn't allow any future SetPolicy
calls.
4. For every agent rpc API call, the agent asks OPA if that call
should be allowed. OPA allows or not a call based on the current
policy, the name of the agent API, and the API call's inputs. The
agent rejects any calls that are rejected by OPA.
When building using AGENT_POLICY_DEBUG=yes, additional Policy logging
gets enabled in the agent. In particular, information about the inputs
for agent rpc API calls is logged in /tmp/policy.txt, on the Guest VM.
These inputs can be useful for investigating API calls that might have
been rejected by the Policy. Examples:
1. Load a failing policy file test1.rego on a different machine:
opa run --server --addr 127.0.0.1:8181 test1.rego
2. Collect the API inputs from Guest's /tmp/policy.txt and test on the
machine where the failing policy has been loaded:
curl -X POST http://localhost:8181/v1/data/agent_policy/CreateContainerRequest \
--data-binary @test1-inputs.json
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
It's too long a time to cross build agent based on docker buildx, thus
we cross build rootfs based on a container with cross compile toolchain
of gcc and rust with musl libc. Then we get fast build just like native
build.
rootfs initrd cross build is disabled as no cross compile tolchain for
rust with musl lib if found for alpine and based on docker buildx takes
too long a time.
Fixes: #6557
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Add required kernel config for dm-crypt/dm-integrity/dm-verity
and related crypto config.
Add userspace command line tools for disk encryption support
and ext4 file system utilities.
Fixes: #6674
Signed-off-by: Arron Wang <arron.wang@intel.com>
This PR replaces single spaces to tabs in order to fix the
indentation of the rootfs script.
Fixes#6848
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
- D-Bus enabling now occurs only in setup_rootfs (instead of
prepare_overlay and setup_rootfs)
- Adjust permissions of / so dbus-broker will be able to traverse FS
These changes enables kata-agent to successfully communicate with D-Bus.
Fixes#6677
Signed-off-by: Vladimir <amigo.elite@gmail.com>
The agent now offloads cgroup configuration to systemd when
possible. This requires to enable D-Bus in order to communicate
with systemd.
Fixes#6657
Signed-off-by: Greg Kurz <groug@kaod.org>
Create a guest image to support SELinux for containers inside the guest
if `SELINUX=yes` is specified. This works only if the guest rootfs is
CentOS and the init service is systemd, not the agent init. To enable
labeling the guest image on the host, selinuxfs must be mounted on the
host. The kata-agent will be labeled as `container_runtime_exec_t` type.
Fixes: #4812
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
To avoid the random failures when we are building the rootfs as it seems
that it does not find the value for the libseccomp and gperf directory,
this PR export these variables.
Fixes#5232
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Guest log is showing a hang on systemd getty start.
Adding symlink for /dev/ttyS0 resolves issue.
Fixes: #4932
Signed-Off-By: Ryan Savino <ryan.savino@amd.com>
It would be nice to use `versions.yaml` for the maintainability.
Previously, we have been specified the `libseccomp` and the `gperf` version
directly in this script without using the `versions.yaml` because the current
snap workflow is incomplete and fails.
This is because snap CI environment does not have kata-cotnainers repository
under ${GOPATH}. To avoid the failure, the `rootfs.sh` extracts the libseccomp
version and url in advance and pass them to the `install_libseccomp.sh` as
environment variables.
Fixes: #4941
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
In at least kata versions 2.3.3 and 2.4.0 it was noticed that the guest
operating system's clock would drift out of sync slowly over time
whilst the pod was running.
This had previously been raised and fixed in the old reposity via [1].
In essence kvm_ptp and chrony were paired together in order to
keep the system clock up to date with the host.
In the recent versions of kata metioned above,
the chronyd.service fails upon boot with status `266/NAMESPACE`
which seems to be due to the fact that the `/var/lib/chrony`
directory no longer exists.
This change sets the `/var/lib/chrony` directory for the `ReadWritePaths`
to be ignored when the directory does not exist, as per [2].
[1] https://github.com/kata-containers/runtime/issues/1279
[2] https://www.freedesktop.org/software/systemd
/man/systemd.exec.html#ReadWritePaths=
Fixes: #4167
Signed-off-by: Champ-Goblem <cameron_mcdermott@yahoo.co.uk>
Use `multistrap` for building Ubuntu rootfs. Adds support for building
for foreign architectures using the `ARCH` environment variable.
In the process, the Ubuntu rootfs workflow is vastly simplified.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
- Add a doc comment
- Pass to build container, e.g. to build x86_64 with glibc (would
always use musl)
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
