We recently hit the following error during build:
```
RUN ssh-keygen -t ed25519 -f /etc/ssh/ssh_host_ed25519_key -P ""
OpenSSL version mismatch. Built against 3050003f, you have 30500010
```
This happened because `alpine:latest` moved forward and the `ssh-keygen`
binary in the base image was compiled against a newer OpenSSL version
that is not available at runtime.
Pinning the base image to the stable release (3.20) avoids the mismatch
and ensures consistent builds.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Log how much time "kubectl get pods" and each test case are taking,
just in case that will reveal unusually slow test clusters, and/or
opportunities to improve tests.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
This commit addresses an issue where base64 output, when used with a
default configuration, would introduce newlines, causing decoding to
fail on the runtime.
The fix ensures base64 output is a single, continuous line using the -w0
flag. This guarantees the encoded string is a valid Base64 sequence,
preventing potential runtime errors caused by invalid characters.
Note that: When you use the base64 command without any parameters, it
typically automatically adds newlines to the output, usually every 76 chars.
In contrast, base64 -w0 explicitly tells the command not to add any
newlines (-w for wrap, and 0 for a width of zero), which results in a
continuous string with no whitespace.
This is a critical distinction because if you pass a Base64 string with
newlines to a runtime, it may be treated as an invalid string, causing
the decoding process to fail.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
Add container_exec_with_retries(), useful for retrying if needed
commands similar to:
kubectl exec <pod_name> -c <container_name> -- <command>
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
add_allow_all_policy_to_yaml now also sets the initdata annotation. So don't overwrite the
initdata annotation that was previously set by create_coco_pod_yaml_with_annotations.
Signed-off-by: Saul Paredes <saulparedes@microsoft.com>
Tests skipped because tests for `qemu-se` are skipped:
- k8s-empty-dirs.bats
- k8s-inotify.bats
- k8s-shared-volume.bats
Tests skipped because tests for `qemu-runtime-rs` are skipped:
- k8s-block-volume.bats
- k8s-cpu-ns.bats
- k8s-number-cpus.bats
Let's skip the tests above to run the nightly test
for runtime-rs on IBM SEL.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Introduce new test case in k8s-iptables.bats which verifies that
workloads can configure iptables in the UVM.
Users discovered that they weren't able to do this for common usecases
such as istio. Proper support for this should be built into UVM
kernels. This test ensures that current and future kernel
configurations don't regress this functionality.
Signed-off-by: Cameron Baird <cameronbaird@microsoft.com>
In k8s-guest-pull-image.bats, `failed to pull image` is
not caught by assert_logs_contain() for runtime-rs.
To ensure consistency, this commit changes `failed` to
`Failed`, which works for both runtimes.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Currently, there are 2 issues for the empty initdata annotation
test:
- Empty string handling
- "\[CDH\] \[ERROR\]: Get Resource failed" not appearing
`add_hypervisor_initdata_overrides()` does not handle
an empty string, which might lead to panic like:
```
called `Result::unwrap()` on an `Err` value: gz decoder failed
Caused by:
failed to fill whole buffer
```
This commit makes the function return an empty string
for a given empty input and updates the assertion string
to one that appears in both go-runtime and runtime-rs.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Let's rename the runtime-rs initdata annotation from
`io.katacontainers.config.runtime.cc_init_data` to
`io.katacontainers.config.hypervisor.cc_init_data`.
Rationale:
- initdata itself is a hypervisor-specific feature
- the new name aligns with the annotation handling logic:
c92bb1aa88/src/libs/kata-types/src/annotations/mod.rs (L514-L968)
This commit updates the annotation for go-runtime and tests accordingly.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Enable testing of initdata on the qemu-coco-dev and qemu-se
runtime classes, so we can validate the function on s390x
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
After moving Arm64 CI nodes to new one, we do faced an interesting
issue for timeout when it executes the command with crictl runp,
the error is usally: code = DeadlineExceeded
Fixes: #11662
Signed-off-by: Kevin Zhao <kevin.zhao@linaro.org>
This series should make runtime-rs's vcpu allocation behaviour match the
behaviour of runtime-go so we can now enable pertinent tests which were
skipped so far due the difference between both shims.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Print more details about the behavior of "kubectl logs", trying to understand
errors like:
https://github.com/kata-containers/kata-containers/actions/runs/16662887973/job/47164791712
not ok 1 Check the number vcpus are correctly allocated to the sandbox
(in test file k8s-sandbox-vcpus-allocation.bats, line 37)
`[ `kubectl logs ${pods[$i]}` -eq ${expected_vcpus[$i]} ]' failed with status 2
No resources found in kata-containers-k8s-tests namespace.
...
k8s-sandbox-vcpus-allocation.bats: line 37: [: -eq: unary operator expected
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
- "confidential_emptyDir" becomes "emptyDir" in the settings file.
- "confidential_configMap" becomes "configMap" in settings.
- "mount_source_cpath" becomes "cpath".
- The new "root_path" gets used instead of the old "cpath" to point to
the container root path..
- "confidential_guest" is no longer used. By default it gets replaced
by "enable_configmap_secret_storages"=false, because CoCo is using
CopyFileRequest instead of the Storage data structures for ConfigMap
and/or Secret volume mounts during CreateContainerRequest.
- The value of "guest_pull" becomes true by default.
- "image_layer_verification" is no longer used - just CoCo's guest pull
is supported.
- The Request input files from unit tests are changing to reflect the
new default settings values described above.
- tests/integration/kubernetes/tests_common.sh adjusts the settings for
platforms that are not set-up for CoCo during CI (i.e., platforms
other than SNP, TDX, and CoCo Dev).
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
The actual memory usage on the host is equal to the hypervisor memory usage
plus the user memory usage. An OOM killer might kill the shim when the
memory limit on host is same with that of container and the container
consumes all available memory. In this case, the containerd will never
receive OOM event, but get "task exit" event. That makes the `k8s-oom.bats`
test fail.
The fix is to add a new container to increase the sandbox memory limit.
When the container "oom-test" is killed by OOM killer, there is still
available memory for the shim, so it will not be killed.
Signed-off-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
The teardown_common will print the description of the running pods, kill
them all and print the system's syslogs afterwards.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Set the node in the spec template of a Job manifest, allowing to use
set_node() on tests like k8s-parallel.bats
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The teardown_common will print the description of the running pods, kill
them all and print the system's syslogs afterwards.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
The teardown_common will print the description of the running pods, kill
them all and print the system's syslogs afterwards.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
There are workflows that rely on `az aks install-cli` to get kubectl
installed. There is a well-known problem on install-cli, related with
API usage rate limit, that has recently caused the command to fail
quite often.
This is replacing install-cli with the azure/setup-kubectl github
action which has no such as rate limit problem.
While here, removed the install_cli() function from gha-run-k8s-common.sh
so avoid developers using it by mistake in the future.
Fixes#11463
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
This commit updates the `tests_common.sh` script
to enable the `confidential_guest`
setting for the coco tests in the Kubernetes
integration tests.
Signed-off-by: Archana Choudhary <archana1@microsoft.com>
