This commit implements the `find_available_node` function,
which searches the PCIe topology for the first available
`TopologyPortDevice` or `SwitchDownPort`.
If no available node is found in either the `pcie_port_devices`
or the connected switches' downstream ports, the function returns
`None`.
Fixes # 10361
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
This commit note that the current implementation restriction where
'multifunction=on' is temporarily unsupported. While the feature
isn't available in the present version, we explicitly acknowledge
this limitation and commit to addressing it in future iterations
to enhance functional completeness.
Tracking issue #11292 has been created to monitor progress towards
full multifunction support.
Fixes#10361
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
To support port devices for vfio devices, more fields need to be
introduced to help pass port type, bus and other information.
Fixes#10361
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
There's several cases that block device plays very import roles:
1. Direct Volume:
In Kata cases, to achieve high-performance I/O, raw files on the host
are typically passed directly to the Guest via virtio-blk, and then
bond/mounted within the Guest for container usage.
2. Trusted Storage
In CoCo scenarios, particularly in Guest image pull mode, images are
typically pulled directly from the registry within the Guest. However,
due to constrained memory resources (prioritized for containers), CoCo
leverages externally attached encrypted storage to store images,
requiring hot-plug capability for block devices.
and as other vmms, like dragonball and cloud-hypervisor in runtime-rs or
qemu in kata-runtime have already supported such capabilities, we need
support block device with hot-plug method (QMP) in qemu-rs. Let's do it.
Fixes#11143
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
This commit introduces block device hotplugging capability using
QMP commands.
The implementation enables attaching raw block devices to a running
VM through the following steps:
1.Block Device Configuration
Uses `blockdev-add` QMP command to define a raw block backend with
(1) Direct I/O mode
(2) Configurable read-only flag
(3) Host file/block device path (`/path/to/block`)
2.PCI Device Attachment, Attaches the block device via `device_add`
QMP command as a `virtio-blk-pci` device:
(1) Dynamically allocates PCI slots using `find_free_slot()`
(2) Binds to user-specified PCIe bus (e.g., `pcie.1`)
(3) Returns PCI path for further management
Fixes#11143
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
The get_pci_path_by_qdev_id function is designed to search for a PCI
device within a given list of devices based on a specified qdev_id.
It tracks the device's path in the PCI topology by recording the slot
values of the devices traversed during the search. If the device is
located behind a PCI bridge, the function recursively explores the
bridge's device list to find the target device. The function returns
the matching device along with its updated path if found, otherwise,
it returns None.
Fixes#11143
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
Extract PortDevice relevant information, and then invoke different
processing methods based on the device type.
Fixes#10361
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
Some data structures and methods are introduced to help handle vfio devices.
And mothods add_pcie_root_ports and add_pcie_switch_ports follow runtime's
related implementations of vfio devices.
Fixes#10361
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
Prepare pcie port devices before starting VM with the help of
device manager and PCIe Topology.
Fixes#10361
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
A new resource type `PortDevice` is introduced which is dedicated
for handling root ports/switch ports during sandbox creation(VM).
Fixes#10361
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
PortDevice is for handling root ports or switch ports in PCIe
Topology. It will make it easy pass the root ports/switch ports
information during create VM with requirements of PCIe devices.
Fixes#10361
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
This commit introduces an implementation for managing PCIe topologies,
focusing on the relationship between Root Ports and Switch Ports. The
design supports two strategies for generating Switch Ports:
Let's take the requirement of 4 switch ports as an example. There'll be
three possible solutions as below:
(1) Single Root Port + Single PCIe Switch: Uses 1 Root Port and 1 Switch
with 4 Downstream Ports.
(2) Multiple Root Ports + Multiple PCIe Switches: Uses 2 Root Ports and
2 Switches, each with 2 Downstream Ports.
The recommended strategy is Option 1 due to its simplicity, efficiency,
and scalability. The implementation includes data structures
(PcieTopology, RootPort, PcieSwitch, SwitchPort) and operations
(add_pcie_root_port, add_switch_to_root_port, add_switch_port_to_switch)
to manage the topology effectively.
Fxies #10361
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
With #11076 merged, a VFIO configuration is needed in the runtime
when IBM SEL is involved (e.g., qemu-se or qemu-se-runtime-rs).
For the Go runtime, we already have a nightly test
(e.g., https://github.com/kata-containers/kata-containers/actions/runs/14964175872/job/42031097043)
in which this change has been applied.
For the Rust runtime, the feature has not yet been migrated.
Thus, this change serves as a placeholder and a reminder for future implementation.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Update the tempfile crate to resolve security issue
[WS-2023-0045](7247a8b6ee)
that came with the remove_dir_all dependency in prior versions
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Since the ephemeral volume already has a separate volume type for
processing, the processing in the virtiofs share volume can be deleted.
Moreover, it is not appropriate to process the ephemeral in the share
fs.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
For k8s, there's two type of volumes based on ephemral memory,
one is emptydir volume based on ephemeral memory, and the other
one is used for shm device such as /dev/shm. Thus add a new volume
type ephemeral volume to support those two type volumes and remove
the legacy shm volume.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
Some cni plugins will set the MTU of some routes, such as cilium will
modify the MTU of the default route. If the mtu of the route is not set
correctly, it may cause excessive fragmentation or even packet loss of
network packets. Therefore, this PR adds the setting of the MTU of the
route. First, when obtaining the route, if the MTU is set, the MTU will
also be obtained and set to the route in the guest.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
Bump `netlink-sys` to v0.8, `netlink-packet-route` to v0.22 and
`rtnetlink` to v0.16 to reach a consistent state of `rust-netlink`
dependencies.
`bitflags` is bumped to v2.9.0 since those crates requires it.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
`rtnetlink`, `netlink-sys` and `netlink-packet-route` are from the same
organization, and some of them are depending on the others, which
implies the version of those crates should be chosen and dealt with
carefully, group them to provide better management.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
It's better to open the log pipe file with read & write option,
otherwise, once the containerd reboot and closed the read
endpoint, kata shim would write the log pipe with broken pipe error.
Fixes: #11207
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
Update the runtime-rs workspace packages to
use workspace package versions where applicable
to centralise the config and reduce maintenance
when updating these
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Update all crossbeam-channel for all non-agent
packages (it was done separately in #11175)
to 0.5.15 to get them on latest version and remove
the versions with a vulnerability
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Use `|=` instead of `+=` while calculating and iterating through a
vector of flags, which makes more sense and prevents situations like
duplicated flags in vector, which would cause problems.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Put local dependencies into workspace to avoid complex path dependencies all
over the workspace. This gives an overview of local dependencies this workspace
uses, where those crates are located, and simplifies the local dependencies
referencing process.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Judging by the layout of the `Cargo.toml` files, local dependencies are
intentionally separated from other dependencies, let's enforce it
workspace-wise.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Only `shim` and `shim-ctl` are incorporated in `runtime-rs`'s workspace, let's
extend it to cover all crates in `runtime-rs/crates`.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Just get base name from iommu group symlink is enough. As the
validation will be handled in subsequent steps when constructing
the full path /sys/kernel/iommu_groups/$iommu_group.
In this PR, it will remove dupicalted validation of iommu_group.
Signed-off-by: alex.lyn <alex.lyn@antgroup.com>
While running `cargo fmt -- --check` in `src/runtime-rs` directory, it
errors out and suggesting these is an redundant empty line, which
prevents `make check` of `runtime-rs` component from passing.
Remove redundant empty line to fix this.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Since some files generated by protobuf were share between
runtime-rs and kata agent, and the kata agent's dependency
image-rs dependened protobuf@3.7.1, thus we'd better to keep
the protobuf version aligned between runtime-rs and agent,
otherwise, we couldn't compile the runtime-rs and agent
at the same time.
Fixes: https://github.com/kata-containers/kata-containers/issues/10650
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
AddSwap send the pci path to guest kernel to let it add swap device.
But some mmio device doesn't have pci path. To support it add
AddSwapPath send virt_path to guest kernel as swap device.
Fixes: #10988
Signed-off-by: Hui Zhu <teawater@antgroup.com>
This commit add guest swap support.
When configuration enable_guest_swap is enabled, runtime-rs will start a
swap task.
When the VM start or update the guest memory, the swap task will be
waked up to create and insert a swap file.
Before this job, swap task will sleep some seconds (set by configuration
guest_swap_create_threshold_secs) to reduce the impact on guest kernel
boot performance and prevent the insertion of multiple swap files due to
frequent memory elasticity within a short period.
The size of swap file is set by configuration guest_swap_size_percent.
The percentage of the total memory to be used as swap device.
Fixes: #10988
Signed-off-by: Hui Zhu <teawater@antgroup.com>
