Relax the timeout for calling CLH's CreateVM + BootVM APIs. When
hitting the older 1s timeout, killing a half-booted Guest and
retrying the same boot sequence could have been wasteful and resulting
in unstable CI testing on slower Hosts.
Fixes: #9152
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
As part of the shim network metrics, the shim is reporting network interfaces
from the host with no namespace isolation - this gives insight in interfaces
not tied to the kata containers, and causes an increase in resource usage for
kata metrics.
As the shim itself is not using the network (all its communication with
other processes is done with local unix sockets), there is no reason to
keep gathering and reporting shim-specific network metrics.
Actual network usage of the kata containers can be found from the existing
hypervisor network metrics (kata_hypervisor_netdev) and from the agent
network metrics (kata_guest_netdev_stat).
Fixes: #5738
Signed-off-by: Julien Ropé <jrope@redhat.com>
In case an error is encountered while removing a network endpoint during
network cleanup, we cuurently return immediately with the error.
With this change, in case of error we simply log the error and proceed
towards removing the next endpoint. With this, we can cleanup the
network changes made by the shim as much as possible.
This is especially important when multiple interfaces are passed to the
network namespace using a network plugin like multus.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Move the defer for cleaning up network before the call to add network.
This way if any change made by add network is reverted by in case of
failure. This is particulary important for physical network interfaces
as with this step we make sure that driver for the physical interface is
reverted back to the original host driver. Without this the physical
network iterface will remain bound to vfio.
Fixes: #8646
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
This is needed to fix the bug which is not allowing to create SEV container
on SNP enabled host anymore. This is a regression that was introduced as
part of the following commit:
de39fb7d38Fixes: #9036
Signed-off-by: Niteesh Dubey <niteesh@us.ibm.com>
The original handling method does not reach user expectations.
When the ClientSocketAddress method stats the corresponding
path of runtime-rs and has not found it yet, we should return
an error message here that includes the reason for the failure
(which should be an error display indicating that both runtime-go
and runtime-rs were not found). Instead of simply displaying the
corresponding path of runtime-rs as the final error message to
users.
It is also necessary to return the error promptly to the caller
for further error handling.
Fixes: #8999
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
Now that we have a confidential image / initrd being built, instead of a
specific one for each TEE, let's use it everywhere possible.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As we're building a single confidential kernel, we should rely on it
rather than keep using the specific ones for TDX / SEV / SNP.
However, for debugability-sake, let's do this change TEE by TEE.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As we're building a single confidential kernel, we should rely on it
rather than keep using the specific ones for TDX / SEV / SNP.
However, for debugability-sake, let's do this change TEE by TEE.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As we're building a single confidential kernel, we should rely on it
rather than keep using the specific ones for TDX / SEV / SNP.
However, for debugability-sake, let's do this change TEE by TEE.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
With this we can properly generate and the the `-confidential` kernel,
which supports SEV / SNP / TDX as part of our configuration files.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This patch can reduce load on systemd process, and
increase the k8s deployment density when using go runtime.
Fixes: #8758
Signed-off-by: Zhigang Wang <wangzhigang17@huawei.com>
Signed-off-by: Liu Wenyuan <liuwenyuan9@huawei.com>
SharedVersion fiel add a versiontable property that isn't supported by upstream QEMU.
This is dead code since virtcontainers isn't setting SharedVersions to true.
Fixes: #7720
Signed-off-by: Kvlil <kalil.pelissier@gmail.com>
A few CPU related test cases were failing as the version was being verified against Power8 while the CI machine is Power9.
Fixes: #5531
Signed-off-by: Amulyam24 <amulmek1@in.ibm.com>
This is to reintroduce a configuration rule for IBM Z Secure Execution,
where no initrd path should be configured. For the TEE of interest,
only a kernel image should be specified with `confidential_guest=true`.
Fixes: #8692
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Device mapper is the only supported block device driver so far,
which seems limiting. Kata Containers can work well with other
block devices. It is necessary to enhance supporting of multiple
kinds of host block device.
Fixes#4714
Signed-off-by: yuchen.cc <yuchen.cc@alibaba-inc.com>
This reverts commit b0157ad73a.
```
commit b0157ad73a
Refs: 3.3.0-alpha0-124-gb0157ad73
Author: Fabiano Fidêncio <fabiano.fidencio@intel.com>
AuthorDate: Fri Aug 11 14:55:11 2023 +0200
Commit: Fabiano Fidêncio <fabiano.fidencio@intel.com>
CommitDate: Fri Nov 10 12:58:20 2023 +0100
runtime: confidential: Do not set the max_vcpu to cpu
We don't have to do this since we're relying on the
`static_sandbox_resource_mgmt` feature, which gives us the correct
amount of memory and CPUs to be allocated.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
```
This commit was removing a requirement that was made previously, but due
to the SMP issue we're facing with the QEMU used for TDX (see commit
d1b54ede290e95762099fff4e0bcdad10f816126*), QEMU will fail to start due
to:
```
Invalid CPU topology: product of the hierarchy must match maxcpus:
sockets (1) * dies (1) * cores (1) * threads (1) != maxcpus (240)"
```
This has no affect on the SEV / SNP workflow and hopefully we'll be able
to re-revet this soon enough, when this gets solved on te QEMU side.
Last but not least, this is not a "clean" revert as we're using
conf.NumVCPUs() instead of conf.NumVCPUs, to ensure we're dealing with
uint32.
Fixes: #8532
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
- Update the remote hypervisor code to match the re-genned code for
the ttrpc Hypervisor Service
Fixes: #8519
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
The new clean-generated-files make target allows for removing the
generated files (including the configuration.toml files).
The tools/packaging/static-build/shim-v2/build.sh script now uses that
target to always force the re-generation of those files.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
1) Creating storage for all `io.katacontainers.volume=` messages in rootFs.Options,
and then aggregates all storages into `containerStorages`.
2) Creating storage for other data volumes and push them into `volumeStorages`.
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
To enhance the construction and administration of `Katavirtualvolume` storages,
this commit expands the 'sharedFile' structure to manage both
rootfs storages(`containerStorages`) including `Katavirtualvolume` and other data volumes storages(`volumeStorages`).
NOTE: `volumeStorages` is intended for future extensions to support Kubernetes data volumes.
Currently, `KataVirtualVolume` is exclusively employed for container rootfs, hence only `containerStorages` is actively utilized.
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
The snapshotter will place `KataVirtualVolume` information
into 'rootfs.options' and commence with the prefix 'io.katacontainers.volume='.
The purpose of this commit is to transform the encapsulated KataVirtualVolume data into device information.
Fixes: #8495
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
Co-authored-by: Feng Wang <feng.wang@databricks.com>
Co-authored-by: Samuel Ortiz <sameo@linux.intel.com>
Co-authored-by: Wedson Almeida Filho <walmeida@microsoft.com>
Add the corresponding data structure in the runtime part according to
kata-containers/kata-containers/pull/7698.
Fixes: #8472
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
In order to support different pod VM instance type via
remote hypervisor implementation (cloud-api-adaptor),
we need to pass machine_type, default_vcpus
and default_memory annotations to cloud-api-adaptor.
The cloud-api-adaptor then uses these annotations to spin
up the appropriate cloud instance.
Reference PR for cloud-api-adaptor
https://github.com/confidential-containers/cloud-api-adaptor/pull/1088Fixes: #7140
Signed-off-by: Pradipta Banerjee <pradipta.banerjee@gmail.com>
(based on commit 004f07f076)
This patch updates the template configuration file for
the remote hypervisor to set static_sandbox_resource_mgmt
to be true. The remote hypervisor uses the peer pod config
to determine the sandbox size, so requires this to be set to
true by default.
Fixes: #6616
Signed-off-by: Yohei Ueda <yohei@jp.ibm.com>
(based on commit 938447803b)
