This should only be done once, and if CRI-O restarts, there's a big
chance kata-deploy will also restart and the user would end up with a
file that looks like:
```
[crio]
log_level = "debug"
[crio]
log_level = "debug"
[crio]
log_level = "debug"
...
```
And that would simply cause CRI-O to not start.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is to make `boot-image-se-tarball` use confidential kernel and
initrd instead of vanilla version of artifacts.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
The commit is to make the OPA build from source working in `ubuntu-rootfs-osbuilder`.
To achieve the goal, the configuration is changed as follows:
- Switch the make target to `ci-build-linux-static` not triggering docker-in-docker build
- Install go in the builder image for s390x and ppc64le
Fixes: #9466
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
`CONFIG_TN3270_TTY` and `CONFIG_S390_AP_IOMMU` are dropped for s390x
in 6.7.x which is used for a confidential kernel.
But they are still used for a vanilla kernel. So we need to add them
to the whitelist.
Fixes: #9465
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
- Set KBC_PROVIDER and ATTESTER rather than TEE_PLATFORM
to avoid tss build issues for vTPM attester(s)
- There are future plans to make a matching TEE_PLATFORM, so this can be simplified once that is available
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
- Switch to Ubuntu 20.04 for building guest-components as
The rootfs is based on 20.04, so we need matching GLIBC versions.
See #8955
- Add dependencies needed by TDX verifier as we want to build for all platforms
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Let's update the QEMU to the one that's officially maintained by Intel
till all the TDX patches make their way upstream.
We've had to also update python to explicitly use python3 and add
python3-venv as part of the dependencies.
Fixes: #8810
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Since we're removing the unused service_offload parameter,
don't set it in any of the packaging scripts.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
The automated release workflow starts with the creation of the release in
GitHub. This is followed by the build and upload of the various artifacts,
which can be very long (like hours). During this period, the release appears
to be fully available in https://github.com/kata-containers/kata-containers/
even though it lacks all the artifacts. This might be confusing for users
or automation consuming the release.
Create the release as draft and clear the draft flag when all jobs are
done. This ensure that the release will only be tagged and made public
when it is fully usable.
If some job fails because of network timeout or any other transient
error, the correct action is to restart the failed jobs until they
eventually all succeed. This is by far the quicker path to complete
the release process.
If the workflow is *canceled* for some reason, the draft release is left
behind. A new run of the workflow will create a brand new draft release
with the same name (not an issue with GitHub). The draft release from
the previous run should be manually deleted. This step won't be automated
as it looks safer to leave the decision to a human.
[1] https://github.com/kata-containers/kata-containers/releasesFixes#9064 - part VI
Signed-off-by: Greg Kurz <groug@kaod.org>
The lib.sh script uses the right directory but the wrong path for the
script that installs yq; fix it.
Fixes#9165
Signed-off-by: Chelsea Mafrica <chelsea.e.mafrica@intel.com>
Change scripts and source that uses files in the tests repo to use the
corresponding file in the current repo.
Fixes#9165
Signed-off-by: Chelsea Mafrica <chelsea.e.mafrica@intel.com>
Now that the version is an invariant for the entire workflow, it
isn't required to obtain it with an environment variable. Just
rely on the content of the `VERSION` file like other actions.
Fixes#9064 - part VI
Signed-off-by: Greg Kurz <groug@kaod.org>
CONFIG_CRYPTO_ECDSA is not supported in older kernels such as 5.10.x
which may cause building broken problem if we build such kernel with
NVIDIA GPU in version 5.10.x
So this patch is to add CONFIG_CRYPTO_ECDSA into whitelist.conf to
avoid break building guest kernel with NVIDIA GPU.
Fixes: #9140
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
This reverts commit 0fa59ff94b, as now
we'll be able to use the `--generate-notes`, hopefully, without blowing
the allowed limit.
Fixes: #9064 - part VI
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This release is a special case, as we've slacked for 6 months and the
release content is way too long ... long enough to exceed the allowed
limit for the release notes.
With this in mind we'll just remove the `--generate-notes` for now, and
then revert this commit as soon as the release is out, as releases
should be happening every month and, ideally, we won't reach this
situation never ever again.
Fixes: #9064 - part V
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's make sure those two proxy settings are respected, as those will be
widely used when pulling the image inside the guest on the Confidential
Containers case.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
To access the URL, the component to pull image in the guest needs to send a request to the remote.
Therefore, we need to add CA to the rootfs.
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
Enable to build kata-agent with PULL_TYPE feature.
We build kata-agent with guest-pull feature by default, with PULL_TYPE set to default.
This doesn't affect how kata shares images by virtio-fs. The snapshotter controls the image pulling in the guest.
Only the nydus snapshotter with proxy mode can activate this feature.
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
Add "guest-pull" feature option to determine that the related dependencies
would be compiled if the feature is enabled.
By default, agent would be built with default-pull feature, which would
support all pull types, including sharing images by virtio-fs and
pulling images in the guest.
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
This drops the documentation of the legacy release scripts and adds
a quick description of the scripts of the new workflow. It also
highlights the bump of the `VERSION` file.
Signed-off-by: Greg Kurz <groug@kaod.org>
All releases are now created in the `main` branch following
the very same workflow. No need to special case pre-releases.
Signed-off-by: Greg Kurz <groug@kaod.org>
This is done in order to avoid having to push a commit to the main
branch, which is against the defined rules on GitHub.
By doing this, we need to educate ourselves to always bump the VERSION
file as soon as a release is cut out.
As a side effect of this change, we can drop the release-major and
release-minor workflows, as those are not needed anymore.
Fixes: #9064 - part IV
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We're trying to keep just the bare minimum info, as we really would like
to not have the list of commits, and mainly the list of new
contributors, trucated from the release notes.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We need to ensure the release type is passed down to workflows,
otherwise we'll fail to get the correct release version for tagging the
daemonset images.
Fixes: #9064 - part III
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
- enable CONFIG_MTRR,CONFIG_X86_PAT on x86_64 for nvidia gpu
- optimize -f of build-kernel.sh, clean old kernel path and config before setup
- add kernel 5.16.x
Fixes: #9143
Signed-off-by: Jimmy-Xu <xjimmyshcn@gmail.com>
We were never passing the arguments to add the PAUSE_IMAGE to the
rootfs, leading to it never being present in the confidential image /
initrd.
Fixes: #9032 -- part II
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is not needed anymore as we can run the tests from any branch, and
we can patch this locally before doing a test.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
I'm getting here the most relevant parts of what we had as part of the
release-notes.sh script. As the script will not be used anymore, it's
been removed.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
For some reason we need to force its installation in the GOPATH,
otherwise yq is not found.
Ideally we should switch to a packaged version of yq, but that's a topic
for another series.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is utterly counter intuitive, but if we change a file during the
GitHub Action, the checkout done for the next workflow won't have that
file updated, but rather the branch on its original state when the
workflow was created.
This makes us safe to always "calculate" the next release version from
the VERSION file at the time the workflow was triggered.
This requires us to have the release type exported for the whole
workflow.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We missed doing this as part of
50011e89a0, but we also need to check for:
* RELEASE_VERSION
* GH_TOKEN
* ARCHITECTURE
* KATA_STATIC_TARBALL
While here, let's fix a ARCHITECURE -> ARCHITECTURE typo.
Fixes: #9064 -- part II
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This commit should be merged as it's now, then we trigger a test
release, fix whatever has to be fixed, and drop it as soon as we know
our workflows are working as expected.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Those are not needed anymore as we're automating our release process
around GitHub actions.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
