We get the following error while writing containerd config
if a base dir `/etc/containerd` does not exist like:
```
sudo tee /etc/containerd/config.toml << EOF
...
EOF
tee: /etc/containerd/config.toml: No such file or directory
```
The commit makes sure a base directory for containerd before
writing config and drops the config file deletion because a
default behaviour of `tee` is overwriting.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
With this we switch to fully testing with helm, instead of testimg with
the kustomizations (which will soon be removed).
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Let's use what we have in the k8s functional tests to create a common
function to deploy kata containers using our helm charts. This will
help us immensely in the kata-deploy testing side in the near future.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
This is not strictly needed, but it does help a lot when setting up a
cluster manually, while still relying on those scripts.
While here, let's also ensure the assignment is between quotes, to make
shellchecker happier.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
More straightforward implementation of hard_coded_policy_tests_enabled,
that avoids ShellCheck warning:
warning: Remove quotes from right-hand side of =~ to match as a regex rather than literally. [SC2076]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Fix unintended use of caller's variable. Use the corresponding function
parameter instead. ShellCheck:
warning: policy_settings_dir is referenced but not assigned. [SC2154]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Avoid masking command return values by declaring and only then assigning.
ShellCheck:
warning: Declare and assign separately to avoid masking return values. [SC2155]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Pick the the values exported by other scripts. ShellCheck:
warning: AUTO_GENERATE_POLICY is referenced but not assigned. [SC2154]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
ShellCheck:
warning: This assignment is only seen by the forked process. [SC2097]
warning: This expansion will not see the mentioned assignment. [SC2098]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
ShellCheck: add braces around variable references:
note: Prefer putting braces around variable references even when not strictly required. [SC2250]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
ShellCheck: export variables used outside of tests_common.sh - e.g.,
warning: timeout appears unused. Verify use (or export if used externally). [SC2034]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Replace [ ] with [[ ]] as advised by shellcheck:
note: Prefer [[ ]] over [ ] for tests in Bash/Ksh. [SC2292]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Same rationale as for runtime. With tests, the blackfriday replacement was
actually meaningful, so I refactored some imports.
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
Retry "kubectl exec" a few times if it unexpectedly produced an empty
output string.
This is an attempt to work around test failures similar to:
https://github.com/kata-containers/kata-containers/actions/runs/13840930994/job/38730153687?pr=10983
not ok 1 Environment variables
(from function `grep_pod_exec_output' in file tests_common.sh, line 394,
in test file k8s-env.bats, line 36)
`grep_pod_exec_output "${pod_name}" "HOST_IP=\([0-9]\+\(\.\|$\)\)\{4\}" "${exec_command[@]}"' failed
That test obtained correct ouput from "sh -c printenv" one time, but the
second execution of the same command returned an empty output string.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
In ef0e8669fb we
had been seeing some significantly lower minvalues in
the jitter.Result test, so I lowered the mid-value rather
than having a very high minpercent, but it appears that the
variability of this result is very high, so we are still getting
the occasional high value, so reset the midval and just
have a bigger ranges on both sides, to try and keep the test
stable.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
The kubectl wait has a built in timeout of 30s, so
wrapping it in waitForProcess, means we have
180/2 * 30 delay, which is much longer than intended,
so just set the timeout directly.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Test using the host path /tmp/k8s-policy-pod-test instead of
/var/lib/kubelet/pods.
/var/lib/kubelet/pods might happen to contain files that CopyFileRequest
would try to send to the Guest before CreateContainerRequest. Such
CopyFileRequest was an unintended side effect of this test.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Log the "kubectl exec" ouput, just in case it helps investigate sporadic
test errors like:
https://github.com/kata-containers/kata-containers/actions/runs/13724022494/job/38387329321?pr=10973
not ok 1 Environment variables
(in test file k8s-env.bats, line 37)
`grep "HOST_IP=\([0-9]\+\(\.\|$\)\)\{4\}"' failed
It appears that the first exec from this test case produced the expected
output:
MY_POD_NAME=test-env
but the second exec produced something else - that will be logged after
this change.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Log the "kubectl exec" ouput, just in case it helps investigate sporadic
test errors like:
https://github.com/kata-containers/kata-containers/actions/runs/13724022494/job/38387329268?pr=10973
not ok 1 ConfigMap for a pod
(in test file k8s-configmap.bats, line 44)
`kubectl exec $pod_name -- "${exec_command[@]}" | grep "KUBE_CONFIG_2=value-2"' failed
It appears that the first exec from this test case produced the expected
output:
KUBE_CONFIG_1=value-1
but the second exec produced something else - that will be logged after
this change.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
grep_pod_exec_output invokes "kubectl exec", logs its output, and checks
that a grep pattern is present in the output.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
./tests/git-helper.sh:20:5: note: Prefer [[ ]] over [ ] for tests in Bash/Ksh. [SC2292]
./tests/git-helper.sh:22:26: note: Double quote to prevent globbing and word splitting. [SC2086]
./tests/git-helper.sh:23:7: note: Prefer [[ ]] over [ ] for tests in Bash/Ksh. [SC2292]
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
As we'll touch this file during this series, let's already make sure we
solve all the needed warnings.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
He were fixing the few warnings we found in the files present in the
functional tests for kata-deploy.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
As we're testing against the LTS and the Active versions of
containers, let's upgrade the lts version from 1.6 to 1.7 and
active version from 1.7 to 2.0 to cover the sandboxapi tests.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
When `KATA_HYPERVISOR` is set to `qemu-se-runtime-rs`,
a configuration file is properly referenced and a runtime class
should be created via kata-deploy.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Now we've added the double quotes around
`${K8S_TEST_UNION[@]}`, so platforms are
failing with:
```
Error: Test file "/home/ubuntu/runner/_layout/_work/kata-containers/kata-containers/tests/integration/kubernetes/k8s-nginx-connectivity.bats
" does not exist
```
due to the line continuation, so sanitise the value
to try and fix this.
Co-authored-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
This was checking that a literal string was non-zero.
I'm assume it instead wanted to check if the file exists
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
