Otherwise `make test` will fail with:
```
error[E0583]: file not found for module `version`
```
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We're moving it out of the previous "static-checks" confusing matrix,
and adding it to the matrix that was currently being used for the `make
vendor` checks.
This will allow us to have one job per component, and with that we can
easily run those in parallel and on the zero cost runners.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
clippy is used as part our tests, so it's useful to have it installed
while we're already installing rust.
In case of developers, they also better be using it. :-)
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Similarly to the static-check jobs, those jobs can be run on the zero
cost runners.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We'll use it as part of the refactoring we're doing in the static check
tests.
I can see a lot of other uses of this, but changing all of them to this
one is out of the scope for this PR.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We can use this a lot as part of our CI, but right now I'm just moving
those here with the intent to use later on in this series.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
It doesn't make sense to run this for all the bits of the matrix,
neither it's demanding enough to require running this in one of our
Azure sponsored runners.
Fixes: #7974 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let me start with a fair warning that this commit is hard to split into
different parts that could be easily tested (or not tested, just
ignored) without breaking pieces.
Now, about the commit itself, as we're on the run to reduce costs
related to our sponsorship on Azure, we can split the k8s tests we run
in 2 simple groups:
* Tests that can be run in the smaller Azure instance (D2s_v5)
* Tests that required the normal Azure instance (D4s_v5)
With this in mind, we're now passing to the tests which type of host
we're using, which allows us to select to run either one of the two
types of tests, or even both in case of running the tests on a baremetal
system.
Fixes: #7972
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This PR adds support for adding a network device before starting the
cloud-hypervisor VM.
Support for adding and removing network devices is not really added to
the resource manager, so supporting this for cloud-hypervisor is not
scoped in this PR.
This also changes "pending_devices" for clh implementation from an
Option of vector to simply a vector. This simplifies the structure a bit
as we can simple iterate over the pending devices instead of having to
check for a "Some" value as this is not really required.
Fixes: #6333
Signed-off-by: Shuaiyi Zhang <zhang_syi@qq.com>
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
We've removed this in the part 2 of this effort, as we were not caching
the sha256sum of the component. Now that this part has been merged,
let's get back to checking it.
Fixes: #7834 -- part 3
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
That's not needed anymore, as we've switched to using ORAS and an OCI
registry to cache the artefacts.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is something that was done by our Jenkins jobs, but that I ended up
missing when writing d0c257b3a7.
Now, let's also add the sha256sum to the cached artefact, and in a
coming up PR (after this one is merged) we will also start checking for
that.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
In the previous series related to the artefacts we build, we've
switching from storing the artefacts on Jenkins, to storing those in the
ghcr.io/kata-containers/cached-artefacts/${artefact_name}.
Now, let's take advantage of that and actually use the artefacts coming
from that "package" (as GitHub calls it).
NOTE: One thing that I've noticed that we're missing, is storing and
checking the sha256sum of the artefact. The storing part will be done
in a different commit, and the checking the sha256sum will be done in a
different PR, as we need to ensure those were pushed to the registry
before actually taking the bullet to check for them.
Fixes: #7834 -- part 2
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
cloud hypervisor on arm64 only support arm AMBA UART(pl011) as
tty. So, the console should be set to "ttyAMA0" instead of "ttyS0"
when enable hypervisor debug mode.
Fixes: #5080
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
The list of tests which require a bigger VM instance is:
* k8s-number-cpus.bats -- failing on all CIs
* k8s-parallel.bats -- only failing on the cbl-mariner CI
* k8s-scale-nginx.bats -- only failing on the cbl-mariner CI
We'll keep those disabled while we re-work the logic to **only run
those** in a bigger (and more expensive) VM instance.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's push the artefacts to ghcr.io and stop relying on jenkins for
that.
Fixes: #7834 -- part 1
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Right now this is not used, but it'll be used when we start caching the
artefacts using ORAS.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
ORAS is the tool which will help us to deal with our artefacts being
pushed to and pulled from a container registry.
As both the push to and the pull from will be done inside the
kata-deploy binaries builder container, we need it installed there.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We don't need to run on a D4s_v5. as those tests are not CPU / memory
intense. With this is mind, let's use a smaller version of the
instance, the D2s_v5 one.
Fixes: #7958
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We don't need to run on a D4s_v5. as those tests are not CPU / memory
intense. With this is mind, let's use a smaller version of the
instance, the D2s_v5 one.
Fixes: #7958
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We don't need to run on a D4s_v5. as those tests are not CPU / memory
intense. With this is mind, let's use a smaller version of the
instance, the D2s_v5 one.
Fixes: #7958
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We don't need to run on a D4s_v5. as those tests are not CPU / memory
intense. With this is mind, let's use a smaller version of the
instance, the D2s_v5 one.
Fixes: #7958
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We don't need to run on a D4s_v5. as those tests are not CPU / memory
intense. With this is mind, let's use a smaller version of the
instance, the D2s_v5 one.
Fixes: #7958
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Without setting the cpu limit / request to 1, we can make this test run
in a smaller VM instance without any issue.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As the environment variables are now being passed down from the GitHub
Actions, let's make sure they're exposed to the container used to build
the kata-deploy binaries, and during the build process we'll be able to
use those to log in and push the artefacts to the OCI registry, using
ORAS.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We do the build of our artefacts inside a container image, and we need
to expose some env vars to the container so ORAS can be used there to
push the artefacts we want to cache to ghcr.io.
The env vars we're exposing are:
* ARTEFACT_REGISTRY: The registry where we're going to save the
artefacts.
* ARTEFACT_REGISTRY_USERNAME: The username to log in to the registry, as
ORAS does not use the same json file used by docker.
* ARTEFACT_REGISTRY_PASSWORD: The pasword to log in to the the registry,
as the ORAS does not use the same json file used by docker.
* TARGET_BRANCH: The target branch, which will be part of the tag of the
artefact, as we may end up caching the artefacts for both main and
stable branches.
Fixes: #7834 -- part 0
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We need a very recent L2 guest kernel to fix all the bugs that occur in nested
virtualization.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
cloud hypervisor does not emulate pcie switches or pci bridges, so we need to
accept a lonely device.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
It is fine to start a VM with the disk image without syncing it as we now run
the test in an ephemeral Azure instance.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
Sometimes the test gets stuck running commands in the container - need to
investigate why later.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
