For nerdctl and docker runtimes, network is hot-plugged instead of
cold-plugged. While this change was made in the runtime,
we did not have the agent waiting for the device to be ready.
On some systems, the device hotplug could take some time causing
the update_interface rpc call to fail as the interface is not available.
Add a watcher for the network interface based on the pci-path of the
network interface. Note, waiting on the device based on name is really
not reliable especially in case multiple networks are hotplugged.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
If the agent-config has a value for `image_registry_auth`,
Then pass this to the image-rs client and enable auth mode too
Fixes: #8122
Signed-off-by: Magnus Kulke <magnuskulke@microsoft.com>
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Add optional config for agent.image_registry_auth, to specify
the uri of credentials to be used when pulling images in the guest
from an authenticated registry
Fixes: #8122
Signed-off-by: Xynnn007 <xynnn@linux.alibaba.com>
Signed-off-by: Magnus Kulke <magnuskulke@microsoft.com>
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
ocicrypt config is for kata-agent to connect to CDH to request for image
decryption key. This value is specified by an env. We use this
workaround the same as CCv0 branch.
In future, we will consider better ways instead of writting files and
setting envs inside inner logic of kata-agent.
Signed-off-by: Xynnn007 <xynnn@linux.alibaba.com>
- Enable the kata-cc-rustls-tls feature in image-rs, so that it
can get resources from the KBS in order to retrieve the registry
credentials.
- Also bump to the latest image-rs to pick up protobuf fixes
- Add libprotobuf-dev dependency to the agent packaging
as it is needed by the new image-rs feature
- Add extra env in the agent make test as the
new version of the anyhow crate has changed the backtrace capture thus unit
tests of kata-agent that compares a raised error with an expected one
would fail. To fix this, we need only panics to have backtraces, thus
set RUST_BACKTRACE=0 for tests due to document
https://docs.rs/anyhow/latest/anyhow/Fixes#9538
Signed-off-by: Xynnn007 <xynnn@linux.alibaba.com>
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
To test unsealing secrets stored in environment variables,
we create a simple test server that takes the place of
the CDH. We start this server and then use it to
unseal a test secret.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
Signed-off-by: Linda Yu <linda.yu@intel.com>
When sealed-secret is enabled, the Kata Agent
intercepts environment variables containing
sealed secrets and uses the CDH to unseal
the value.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@ibm.com>
Signed-off-by: Linda Yu <linda.yu@intel.com>
- Bump the commit of image-rs we are pulling in to 413295415
Note: This is the last commmit before a change to whiteout handling
was introduced that lead to the error `'failed to unpack: convert whiteout"`
when pulling the agnhost:2.21 image
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Let me explain why:
In our previous approach, we implemented guest pull by passing PullImageRequest to the guest.
However, this method resulted in the loss of specifications essential for running the container,
such as commands specified in YAML, during the CreateContainer stage. To address this,
it is necessary to integrate the OCI specifications and process information
from the image’s configuration with the container in guest pull.
The snapshotter method does not care this issue. Nevertheless, a problem arises
when two containers in the same pod attempt to pull the same image, like InitContainer.
This is because the image service searches for the existing configuration,
which resides in the guest. The configuration, associated with <image name, cid>,
is stored in the directory /run/kata-containers/<cid>. Consequently, when the InitContainer finishes
its task and terminates, the directory ceases to exist. As a result, during the creation
of the application container, the OCI spec and process information cannot
be merged due to the absence of the expected configuration file.
Fixes: kata-containers#9665
Fixes: kata-containers#9666
Fixes: kata-containers#9667
Fixes: kata-containers#9668
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
Currently, the image is pulled by image-rs in the guest and mounted at
`/run/kata-containers/image/cid/rootfs`. Finally, the agent rebinds
`/run/kata-containers/image/cid/rootfs` to `/run/kata-containers/cid/rootfs` in CreateContainer.
However, this process requires specific cleanup steps for these mount points.
To simplify, we reuse the mount point `/run/kata-containers/cid/rootfs`
and allow image-rs to directly mount the image there, eliminating the need for rebinding.
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
- Add a check in setup_bundle to see if the bundle already exists
and if it does then skip the setup.
This commit is cherry-picked from 44ed3ab80e.
The reason that k8s-kill-all-process-in-container.bats failed is that
deletion of the directory `/root/kata-containers/cid/rootfs` failed during removing container
because it was mounted twice (one in image-rs and one in set_bundle ) and only unmounted once in removing container.
Fixes: #9664
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
Co-authored-by: Dave Hay <david_hay@uk.ibm.com>
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
This commit adds the missing step of passing an attached vfio-ap device
to a container via ociSpec. It instantiates and passes a vfio-ap device
(e.g. a Z crypto device).
A device at `/dev/z90crypt` covers all use cases at the time of writing.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
In case we are dealing with multiple interfaces and there exists a
network interface with a conflicting name, we temporarily rename it to
avoid name conflicts.
Before doing this, we need to rename bring the interface down.
Failure to do so results in netlink returning Resource busy errors.
The resource needs to be down for subsequent operation when the name is
swapped back as well.
This solves the issue of passing multiple networks in case of nerdctl
as:
nerdctl run --rm --net foo --net bar docker.io/library/busybox:latest ip a
Fixes: #9900
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
We set the VERSION variable consistently across Makefiles to
'unknown' if the file is empty or not present.
We also use git commands consistently for calculating the COMMIT,
COMMIT_NO variables, not erroring out when building outside of
a git repository.
In create_summary_file we also account for a missing/empty VERSION
file.
This makes e.g. the UVM build process in an environment where we
build outside of git with a minimal/reduced set of files smoother.
Signed-off-by: Manuel Huber <mahuber@microsoft.com>
- Update the config parsing logic so that when reading from the
agent-config.toml file any envs are still processed
- Add units tests to formalise that the envs take precedence over values
from the command line and the config file
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
fixes#9810
Add an annotation to the enum values in the agent config that will
deserialize them using a kebab-case conversion, aligning the behaviour
to parsing of params specified via kernel cmdline.
drive-by fix: add config override for guest_component_procs variable
Signed-off-by: Magnus Kulke <magnuskulke@microsoft.com>
fixes#9748
A configuration option `guest_component_procs` has been introduced that
indicates which guest component processes are supposed to be spawned by
the agent. The default behaviour remains that all of those processes are
actively spawned by the agent. At the moment this is based on presence
of binaries in the rootfs and the guest_component_api_rest option.
The new option is incremental:
none -> attestation-agent -> confidential-data-hub -> api-server-rest
e.g. api-server-rest implies attestation-agent and confidential-data-hub
the `none` option has been removed from guest_component_api_rest, since
this is addresses by the introduced option.
To not change expected behaviour for non-coco guests we still will still
only attempt to spawn the processes if the requested attestation binaries
are present on the rootfs, and issue in warning in those cases.
Signed-off-by: Magnus Kulke <magnuskulke@microsoft.com>
The `update_env_pci()` function need the PCI address mapping to
translate the host PCI address to guest PCI address in below
environment variables:
- PCIDEVICE_<prefix>_<resource-name>_INFO
- PCIDEVICE_<prefix>_<resource-name>
So collect PCI address mapping for both vfio-pci-gk and
vfio-pci devices.
Fixes#9614
Signed-off-by: Lei Huang <leih@nvidia.com>
The new version of sriov-network-device-plugin adds an env
`PCIDEVICE_<prefix>_<resource-name>_INFO`, which has a json
value; kata-agent can't parse it as env
`PCIDEVICE_<prefix>_<resource-name>` which has value in format
"DDDD:BB:SS.F".
This change updates env `PCIDEVICE_<prefix>_<resource-name>_INFO`.
Signed-off-by: Lei Huang <leih@nvidia.com>
Fixes: #9532
Close stdin when write_stdin receives data of length 0.
Stop call notify_term_close() in close_stdin, because it could
discard stdout unexpectedly.
Signed-off-by: Tim Zhang <tim@hyper.sh>
Remove reminder to initialize Policy earlier, because currently there
are no plans to initialize earlier.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Implement Agent Policy using the regorus crate instead of the OPA
daemon.
The OPA daemon will be removed from the Guest rootfs in a future PR.
Fixes: #9388
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Lock anyhow version to 1.0.58 because:
- Versions between 1.0.59 - 1.0.76 have not been tested yet using
Kata CI. However, those versions pass "make test" for the
Kata Agent.
- Versions 1.0.77 or newer fail during "make test" - see
https://github.com/kata-containers/kata-containers/issues/9538.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
In do_create_container and do_exec_process, we should create the proc_io first,
in case there's some error occur below, thus we can make sure
the io stream closed when error occur.
Signed-off-by: Tim Zhang <tim@hyper.sh>
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
In scenario passfd-io, we should wait for stdin to close itself
instead of manually intervening in it.
Signed-off-by: Tim Zhang <tim@hyper.sh>
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
Linux kernel generates a panic when the init process exits.
The kernel is booted with panic=1, hence this leads to a
vm reboot.
When used as a service the kata-agent service has an ExecStop
option which does a full sync and shuts down the vm.
This patch mimicks this behavior when kata-agent is used as
the init process.
Fixes: #9429
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
This patch introduces a one-time cpath to mitigate the cgroup residuals. It
might break the device cgroup merging rules when the cgroup has children.
Fixes: #9456
Signed-off-by: Xuewei Niu <niuxuewei.nxw@antgroup.com>
Support different pause images in the guest for guest-pull, such as k8s
pause image (registry.k8s.io/pause) and openshift pause image (quay.io/bpradipt/okd-pause).
Fixes: #9225 -- part III
Signed-off-by: ChengyuZhu6 <chengyu.zhu@intel.com>
