Previous set for the Mount.type with `bind` is wrong, and for local
storage, the type of Mount should be `local`.
This commit aims to correct the type with "local".
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
As the disable_guest_empty_dir order is wrong which causes
the bool value is not correct and it got a wrong result.
This commit aims to correct the parameters order.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
Detected a format mismatch in OCI Spec Capabilities fields between
`runtime-rs` (no `CAP_` prefix) and `runtime-go` (with `CAP_` prefix).
This introduces a normalization of caps in match_caps(p_caps, i_caps).
This ensures robust and consistent processing of Capabilities regardless
of whether the OCI Spec originates from `runtime-rs` or `runtime-go`.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
Currently, the initdata module only detects virtio-blk devices
(/dev/vd*) when searching for the initdata block device. However,
when using virtio-scsi, the devices appear as /dev/sd* in the
guest, causing the initdata detection to fail.
This commit extends the device detection logic to support both
device types:
- virtio-blk devices: /dev/vda, /dev/vdb, etc.
- virtio-scsi devices: /dev/sda, /dev/sdb, etc.
This commits aims to address issue of theinitdata device not being
found when using virtio-scsi
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
It was just missed when adding those configurations.
Signed-off-by: Manuel Huber <manuelh@nvidia.com>
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Previous commit enabled getting the physical address reduction from
processor but just stored it for later use. This commit adds handling
of the value to ProtectionDevice and enables the QEMU driver to use it.
Signed-off-by: Pavel Mores <pmores@redhat.com>
An implementation of cbitpos acquisition is supplied that was missing
so far. We also get the physical address reduction value from the same
source (CPUID Fn8000_001f function). This has been hardcoded at 1 so far,
following the Go runtime example, but it's better to get it from the
processor.
Signed-off-by: Pavel Mores <pmores@redhat.com>
- version.rs gets generated from version.rs.in
- version.rs.in contains values read from VERSION
- so version.rs (and maybe other Agent files too) must be
re-generated when the VERSION file changes
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
The new image reference has changed to mcr.microsoft.com/oss/v2/kubernetes/pause:3.6
from mcr.microsoft.com/oss/kubernetes/pause:3.6.
The new image uses by default UID=0, GID=0 while the older. The older image had:
UID=65535, GID=65535.
There is a new pause_container_id_policy field in genpolicy-settings.json, informing
genpolicy about the way AdditionalGids gets updated - "v1" for the older behavior
and "v2" for the newer AKS version:
- When using v1, the default value of AdditionalGids is {65535}.
- When using v2, the default value of AdditionalGids is {}.
UID=65535 and GID=65535 are still hard-coded by default in genpolicy-settings.json.
We might be able to remove/ignore these fields in the future, if we'll stop relying
on policy::KataSpec::get_process_fields to use these fields.
A new CI function adapt_common_policy_settings_for_aks() changes the pause container
UID, GID, pause_container_id_policy, and image ref settings values when testing on
AKS Hosts - i.e., when testing coco-dev or mariner Hosts.
The genpolicy workarounds for the unexpected behavior with guest pull enabled have
been improved to use the current container's GID instead of hard-coding GID=0 as the
guest pull default. Also, AdditionalGids gets updated when the current container's GID is
changing, instead of always changing the AdditionalGids at the very end of
policy::AgentPolicy::get_container_process(), when the relevant evolution of the GID
value was no longer available.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Make it easier to understand the source of the UID/GID/AdditionalGids
values from the container in the auto-generated policy.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Correct the hardcoded value of disable_guest_empty_dir, instead,
we use the real value of it which comes from the configuration.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
A sandbox annotation that determines if it should create Kubernetes
emptyDir mounts on the guest filesystem.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
It acts as if it should create Kubernetes emptyDir mounts on the
guest filesystem. If enabled, the runtime will not create Kubernetes
emptyDir mounts on the guest filesystem.Instead, emptyDir mounts will
be created on the host and shared via virtio-fs.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
This isn't really related to remote hypervisor though it was useful for
its debugging. It's a small helper I've been using regularly during
development for quite some time that I think might be useful more broadly.
Signed-off-by: Pavel Mores <pmores@redhat.com>
The remote hypervisor launches no VM, it just instructs the Cloud API
Adaptor to do so, therefore it has no need for an image or initrd to boot
from and should be exempt from the mandate for one or the other to be
specified.
Signed-off-by: Pavel Mores <pmores@redhat.com>
The go runtime's .proto file - which is also used by the Cloud API
Adaptor - puts the Hypervisor service into the "hypervisor" package.
runtime-rs has to do the same to avoid an "unimplemented" error.
Signed-off-by: Pavel Mores <pmores@redhat.com>
While the primary goal of this change is to detect regressions to the
NVIDIA SNP GPU scenario, various improvements to reflect a more
realistic CC setting are planned in subsequent changes, such as:
* moving away from the overlayfs snapshotter
* disabling filesystem sharing
* applying a pod security policy
* activating the GPUs only after attestation
* using a refined approach for GPU cold-plugging without requiring
annotations
* revisiting pod timeout and overhead parameters (the podOverhead value
was increased due to CUDA vectorAdd requiring about 6Gi of
podOverhead, as well as the inference and embedqa requiring at least
12Gi, respectively, 14Gi of podOverhead to run without invoking the
host's oom-killer. We will revisit this aspect after addressing
points 1. and 2.)
Signed-off-by: Manuel Huber <manuelh@nvidia.com>
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
Since the nerdctl's network hook would call pselect6 syscall
by xtables-nft-multi, thus we'd better add it to the seccomp's
whitelist.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
On IBM actionspz Z runners, the following error occurs when running
`modprobe`:
```
modprobe: FATAL: Module bridge not found in directory /lib/modules/6.8.0-85-generic
```
Additionally, there are no files under `/lib/modules`, for example:
```
total 0
drwxr-xr-x 1 root root 0 Aug 5 13:09 .
drwxr-xr-x 1 root root 2.0K Oct 1 22:59 ..
```
This commit skips the `test_load_kernel_module` test if the module is
not found or if running `modprobe` is not permitted.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
On IBM actionspz Z runners, write operations on network interfaces
are not allowed, even for the root user.
This commit skips the `add_update_addresses` test if the operation
fails with EACCES (-13, permission denied).
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
On IBM actionspz Z runners, the ioctl system call is not allowed even
for the root user. There is likely an additional security mechanism
(such as AppArmor or seccomp) in place on Ubuntu runners.
This commit introduces a new helper, `is_permission_error()`,
which skips the test if ioctl operations in `reseed_rng()` are not
permitted.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
The IBM actionspz Z runners mount /dev as tmpfs, while other systems
use devtmpfs. This difference causes an assertion failure for
test_already_baremounted.
This commit sets the detected filesystem for bare-mounted points
as the expected value.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
The root filesystem for IBM actionspz Z runners is `btrfs` instead of `ext4`.
The error message differs when an unprivileged user tries to perform a bind mount.
This commit adjusts the handling of error messages based on the detected root
filesystem type.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Since the qemu & cloud-hypervisor support the cpu & memory
hotplug now, thus disable the static resource management
for qemu and cloud-hypervisor by default.
Signed-off-by: Fupan Li <fupan.lfp@antgroup.com>
This commit introduces the configuration flag `disable_guest_empty_dir`
to control the placement of Kubernetes emptyDir volumes.
By default, the value is set to `false`, maintaining the current
behavior of creating emptyDirs within the guest VM
When set to `true`, emptyDirs will be created on the host filesystem.
This is essential for scenarios where users need to share data between
the host and the guest VM via an emptyDir.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
When handling a memory-based emptyDir, the runtime creates a tmpfs
mount inside the guest VM. The previous implementation just supports
mount options with only "rbind", which does not explicitly guarantee
the desired mount propagation behavior.
This commit hardens the mounting process by explicitly adding the
`rprivate` and `rw` mount flags.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
This commit introduces the 'local' volume, which is specifically
designed to create and manage Kubernetes emptyDir volumes directly
within the VM's sandbox directory.
The core functionality ensures that local volume can be handled
correctly in handle volume procedure.
This capability is essential for allowing containers to leverage the
storage backend for shared volumes.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
This commit implements the new 'local' storage type, enabling Kubernetes
emptyDir volumes to be created and managed directly inside the Kata VM
(in the sandbox directory).
The 'local' type instructs the kata-agent to provision the empty
directory within the VM.
This approach allows containers to share storage inside VM, Specially
useful within CoCo emptyDir scenarios.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
Separated the checks for tmpfs and disk-based emptyDirs from an
`if-else if` block into two distinct `if` statements. This clarifies
the logic by treating each volume type detection as an independent task.
Additionally, updated the type for disk-based emptyDirs to the more
semantically accurate `KATA_K8S_LOCAL_STORAGE_TYPE`. This allows for
more specific handling downstream, distinguishing them from generic
host path mounts.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
In fact, emptyDir is not usually found in the proc mounts with the
previous logic and then it failed with the previous implementation.
Based on the related implementation within runtime-go,related
implementation within
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
This introduces a new storage type: local. Local storage type will
tell kata-agent to create an empty directory with LocalStorgae handler
in the sandbox directory within the VM.
And it also makes it align with runtime-go `KataLocalDevType = "local"`.
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
Pod annotations from the outer runtime are being used for cold-plugging
CDI devices. We need to ensure that these annotations don't leak into
the inner runtime for which specific container (sibling) annotations
are being created. Without this change, the inner runtime receives both
annotations, leading to failing CDI injection as an outer runtime
annotation observed in the guest translates to an unresolvable CDI
device, for example, cdi.k8s.io/gpu: "nvidia.com/pgpu=0".
Signed-off-by: Manuel Huber <manuelh@nvidia.com>
In order to fix:
```
=== Running govulncheck on containerd-shim-kata-v2 ===
Vulnerabilities found in containerd-shim-kata-v2:
=== Symbol Results ===
Vulnerability #1: GO-2025-4015
Excessive CPU consumption in Reader.ReadResponse in net/textproto
More info: https://pkg.go.dev/vuln/GO-2025-4015
Standard library
Found in: net/textproto@go1.24.6
Fixed in: net/textproto@go1.24.8
Vulnerable symbols found:
#1: textproto.Reader.ReadResponse
Vulnerability #2: GO-2025-4014
Unbounded allocation when parsing GNU sparse map in archive/tar
More info: https://pkg.go.dev/vuln/GO-2025-4014
Standard library
Found in: archive/tar@go1.24.6
Fixed in: archive/tar@go1.24.8
Vulnerable symbols found:
#1: tar.Reader.Next
Vulnerability #3: GO-2025-4013
Panic when validating certificates with DSA public keys in crypto/x509
More info: https://pkg.go.dev/vuln/GO-2025-4013
Standard library
Found in: crypto/x509@go1.24.6
Fixed in: crypto/x509@go1.24.8
Vulnerable symbols found:
#1: x509.Certificate.Verify
#2: x509.Certificate.Verify
Vulnerability #4: GO-2025-4012
Lack of limit when parsing cookies can cause memory exhaustion in net/http
More info: https://pkg.go.dev/vuln/GO-2025-4012
Standard library
Found in: net/http@go1.24.6
Fixed in: net/http@go1.24.8
Vulnerable symbols found:
#1: http.Client.Do
#2: http.Client.Get
#3: http.Client.Head
#4: http.Client.Post
#5: http.Client.PostForm
Use '-show traces' to see the other 9 found symbols
Vulnerability #5: GO-2025-4011
Parsing DER payload can cause memory exhaustion in encoding/asn1
More info: https://pkg.go.dev/vuln/GO-2025-4011
Standard library
Found in: encoding/asn1@go1.24.6
Fixed in: encoding/asn1@go1.24.8
Vulnerable symbols found:
#1: asn1.Unmarshal
#2: asn1.UnmarshalWithParams
Vulnerability #6: GO-2025-4010
Insufficient validation of bracketed IPv6 hostnames in net/url
More info: https://pkg.go.dev/vuln/GO-2025-4010
Standard library
Found in: net/url@go1.24.6
Fixed in: net/url@go1.24.8
Vulnerable symbols found:
#1: url.JoinPath
#2: url.Parse
#3: url.ParseRequestURI
#4: url.URL.Parse
#5: url.URL.UnmarshalBinary
Vulnerability #7: GO-2025-4009
Quadratic complexity when parsing some invalid inputs in encoding/pem
More info: https://pkg.go.dev/vuln/GO-2025-4009
Standard library
Found in: encoding/pem@go1.24.6
Fixed in: encoding/pem@go1.24.8
Vulnerable symbols found:
#1: pem.Decode
Vulnerability #8: GO-2025-4008
ALPN negotiation error contains attacker controlled information in
crypto/tls
More info: https://pkg.go.dev/vuln/GO-2025-4008
Standard library
Found in: crypto/tls@go1.24.6
Fixed in: crypto/tls@go1.24.8
Vulnerable symbols found:
#1: tls.Conn.Handshake
#2: tls.Conn.HandshakeContext
#3: tls.Conn.Read
#4: tls.Conn.Write
#5: tls.Dial
Use '-show traces' to see the other 4 found symbols
Vulnerability #9: GO-2025-4007
Quadratic complexity when checking name constraints in crypto/x509
More info: https://pkg.go.dev/vuln/GO-2025-4007
Standard library
Found in: crypto/x509@go1.24.6
Fixed in: crypto/x509@go1.24.9
Vulnerable symbols found:
#1: x509.CertPool.AppendCertsFromPEM
#2: x509.Certificate.CheckCRLSignature
#3: x509.Certificate.CheckSignature
#4: x509.Certificate.CheckSignatureFrom
#5: x509.Certificate.CreateCRL
Use '-show traces' to see the other 27 found symbols
Vulnerability #10: GO-2025-4006
Excessive CPU consumption in ParseAddress in net/mail
More info: https://pkg.go.dev/vuln/GO-2025-4006
Standard library
Found in: net/mail@go1.24.6
Fixed in: net/mail@go1.24.8
Vulnerable symbols found:
#1: mail.AddressParser.Parse
#2: mail.AddressParser.ParseList
#3: mail.Header.AddressList
#4: mail.ParseAddress
#5: mail.ParseAddressList
```
Signed-off-by: Fabiano Fidêncio <ffidencio@nvidia.com>
We have here either /dev/vfio/<num> or /dev/vfio/devices/vfio<num>,
for IOMMUFD format /dev/vfio/devices/vfio<num>, strip "vfio" prefix
/dev/vfio/123 - basename "123" - vfioNum = "123" - cdi.k8s.io/vfio123
/dev/vfio/devices/vfio123 - basename "vfio123" - strip - vfioNum = "123" - cdi.k8s.io/vfio123
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
- init: initialize the VM template factory
- status: check the current factory status
- destroy: clean up and remove factory resources
These commands provide basic lifecycle management for VM templates.
Signed-off-by: ssc <741026400@qq.com>
Use `ioctl_with_mut_ref` instead of `ioctl_with_ref` in the
`create_device` method as it needs to write to the `kvm_create_device`
struct passed to it, which was released in v0.12.1.
Signed-off-by: Siyu Tao <taosiyu2024@163.com>
Fix the cargo fmt issues and then we can make the libs tests required
again to avoid this regression happening again.
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Add build_vm_from_template() that flips boot_from_template flag,
wires factory.template_path/{memory,state} into the hypervisor config,
and returns ready-to-use hypervisor & agent instances.
When factory.template is enabled, VirtContainer bypasses normal creation
and directly boots the VM by restoring the template through incoming migration,
completing the "create → save → clone" loop.
Fixes: #11413
Signed-off-by: ssc <741026400@qq.com>
Introduced factory::FactoryConfig with init/destroy/status commands to manage template pools.
Added template::Template to fetch, create and persist base VMs.
Introduced vm::{VM, VMConfig} exposing create, pause, save, resume, stop,
disconnect and migration helpers for sandbox integration.
Extended QemuInner to executes QMP incoming migration, pause/resume and status tracking.
Fixes: #11413
Signed-off-by: ssc <741026400@qq.com>
