Build ubuntu rootfs with Docker failed with error:
`Unable to find libclang`
Fix this error by adding libclang-dev to the dependency.
Signed-off-by: Jitang Lei <leijitang@outlook.com>
KinD checks for the presence of this (and other) kernel configuration
via scripts like
https://blog.hypriot.com/post/verify-kernel-container-compatibility/ or
attempts to directly use /proc/sys/kernel/keys/ without checking to see
if it exists, causing an exit when it does not see it.
Docker/it's consumers apparently expect to be able to use the kernel
keyring and it's associated syscalls from/for containers.
There aren't any known downsides to enabling this except that it would
by definition enable additional syscalls defined in
https://man7.org/linux/man-pages/man7/keyrings.7.html which are
reachable from userspace. This minimally increases the attack surface of
the Kata Kernel, but this attack surface is minimal (especially since
the kernel is most likely being executed by some kind of hypervisor) and
highly restricted compared to the utility of enabling this feature to
get further containerization compatibility.
Signed-off-by: Crypt0s <BryanHalf@gmail.com>
The Clear Linux rootfs is not being tested anywhere, and it seems Intel
doesn't have the capacity to review the PRs related to this (combined
with the lack of interested from the rest of the community on reviewing
PRs that are specific to this untested rootfs).
With this in mind, I'm suggesting we drop Clear Linux support and focus
on what we can actually maintain.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
So far we were not prepared to deal with release candidates as those:
* Do not have a sha256sum in the sha256sums provided by the kernel cdn
* Come from a different URL (directly from Linus)
* Have a different suffix (.tar.gz, instead of .tar.xz)
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
This doesn't change much on how we're doing things Today, but it
simplifies a lot cases that may be added later on (and will be) like
building -rc kernels.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
By doing this we can ensure this can be re-used, if needed (and it'll be
needed), for also getting the URL.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
-f forces the (re)generaton of the config when doing the setup, which
helps a lot on local development whilst not causing any harm in the CI
builds.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Let's just do a simple `sed` and **not** use the repo that became
private.
This is not a backport of https://github.com/tianocore/edk2/pull/6402,
but it's a similar approach that allows us to proceed without the need
to pick up a newer version of edk2.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
We need to know if we're building a nvidia initrd or image
Additionally if we build a regular or confidential VARIANT
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Fixes: #9478
We want to keep track of the driver versions build during initrd/image build so update the artifact_name after the fact.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
This commit introduces changes to enable testing kata-agent's container
APIs of CreateContainer/StartContainer/RemoveContainer. The changeset
include:
- using confidential-containers image-rs crate to pull/unpack/mount a
container image. Currently supports only un-authenicated registry pull
- re-factor api handlers to reduce cmdline complexity and handle
request generation logic in tool
- introduce an OCI config template for container creation
- add test case
Fixes#9707
Signed-off-by: Sumedh Alok Sharma <sumsharma@microsoft.com>
This commit introduces changes to use ubuntu for statically
building kata tools. In the existing CI setup, the tools
currently build only for x86_64 architecture.
It also fixes the build error seen for agent-ctl PR#10395.
Fixes#10441
Signed-off-by: Sumedh Alok Sharma <sumsharma@microsoft.com>
This PR removes the kernel config repo variable at the build kernel
script as it is not used.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
All the oras push logic happens from inside `${workdir}`, while the
root_hash.txt extraction and renaming was not taking this into
consideration.
This was not caught during the manually triggered runs as those do not
perform the oras push.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
The approach taken for now is to export MEASURED_ROOTFS=yes on the
workflow files for the architectures using confidential stuff, and leave
the "normal" build without having it set (to avoid any change of
expectation on the current bevahiour).
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Let's make sure we take the root_hashes into consideration to decide
whether the shim-v2 should or should not be used from the cached
artefacts.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Let's cache the root_hash.txt from the confidential image so we can use
them later on to decide whether there was a rootfs change that would
require shim-v2 to be rebuilt.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Let's ensure we remove the component and any extra tarball provided by
ORAS in case the cached component cannot be used.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Change the PACKAGES variable for the cbl-mariner rootfs-builder
to use the kata-packages-uvm meta package from
packages.microsoft.com to define the set of packages to be
contained in the UVM.
This aligns the UVM build for the Azure Linux distribution
with the UVM build done for the Kata Containers offering on
Azure Kubernetes Services (AKS).
Signed-off-by: Manuel Huber <mahuber@microsoft.com>
This adds provenance attestation logic for agent binaries that are
published to an oci registry via ORAS.
As a downstream consumer of the kata-agent binary the Peerpod project
needs to verify that the artifact has been built on kata's CI.
To create an attestation we need to know the exact digest of the oci
artifact, at the point when the artifact was pushed.
Therefore we record the full oci image as returned by oras push.
The pushing and tagging logic has been slightly reworked to make this
task less repetetive.
The oras cli accepts multiple tags separated by comma on pushes, so a
push can be performed atomically instead of iterating through tags and
pushing each individually. This removes the risk of partially successful
push operations (think: rate limits on the oci registry).
So far the provenance creation has been only enabled for agent builds on
amd64 and xs390x.
Signed-off-by: Magnus Kulke <magnuskulke@microsoft.com>
Adds dependencies of 'clang' & 'protobuf' to be installed in runners
when building agent-ctl sources having image pull support.
Fixes#10400
Signed-off-by: Sumedh Alok Sharma <sumsharma@microsoft.com>
This PR removes egrep command as it has been deprecated and it replaces by
grep in the test images script.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Use the configuration used by AKS (static_sandbox_resource_mgmt=true)
for CI testing on Mariner hosts.
Hopefully pod startup will become more predictable on these hosts -
e.g., by avoiding the occasional hotplug timeouts described by #10413.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
As mariner has switched to using an image instead of an initrd, let's
just drop the abiliy to build the initrd and avoid keeping something in
the tree that won't be used.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
This PR adds the trap statement in the test images script to clean up
tmp files.
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Kata CI will start testing the new rootfs-image-mariner instead of the
older rootfs-initrd-mariner image.
The "official" AKS images are moving from a rootfs-initrd-mariner
format to the rootfs-image-mariner format. Making the same change in
Kata CI is useful to keep this testing in sync with the AKS settings.
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
By checking for AGENT_POLICY we ensure we only try to read
allow-all.rego if AGENT_POLICY is set to "yes"
Signed-off-by: Emanuel Lima <emlima@redhat.com>
