Linux CoCo x86 guest is hardened to ensure RDRAND provides enough
entropy to initialize Linux RNG. A failure will panic the guest.
For confidential guests any other RNG source is untrusted so disable
them.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
As the comment in the fragment suggests, this is for the firecracker builds
and not relevant for confidential guests, for example.
Exlude mmio.conf fragment by adding the new !confidential tag to drop
virtio MMIO transport for the confidential guest kernel (as virtio PCI is
enough for the use cases today).
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
build-kernel.sh supports exluding fragments from the common base
set based on the kernel target architecture.
However, there are also cases where the base set must be stripped
down for other reason. For example, confidential guest builds want to
exclude some drivers the untrusted host may try to add devices (e.g.,
virtio-rng).
Make build-kernel.sh to skip fragments tagged using '!confidential'
when confidential guest kernels are built.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Knowing that the upstream project provides a "ready to use" version of
the kernel, it's good to include an easy way to users to monitor
performance, and that's what we're doing by enabling the TASKSTATS (and
related) kernel configs.
This has been present as part of older kernels, but I couldn't
reasonably find the reason why it's been dropped.
Signed-off-by: Champ-Goblem <cameron@northflank.com>
Signed-off-by: Fabiano Fidêncio <fidencio@northflank.com>
AIA (Advanced Interrupt Architecture) is available and enabled by
default after v6.10 kernel, provide pci.conf to make proper use of IMSIC
of AIA.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
Create `riscv` folder for riscv64 architecture to be inferred while
constructing kernel configuration, and introduce `base.conf` which
builds 64-bit kernel and with KVM built-in to kernel.
Signed-off-by: Ruoqing He <heruoqing@iscas.ac.cn>
At the proper step pass-through the var KBUILD_SIGN_PIN
so that the kernel_headers step has the PIN for encrypting
the signing key.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Set CONFIG_BLK_DEV_WRITE_MOUNTED=y to restore previous kernel behaviour.
Kernel v6.8+ will by default block buffer writes to block devices mounted by filesystems.
This unfortunately is what we need to use mounted loop devices needed by some teams
to build OSIs and as an overlay backing store.
More info on this config item [here](https://cateee.net/lkddb/web-lkddb/BLK_DEV_WRITE_MOUNTED.html)
Fixes: #10808
Signed-off-by: Simon Kaegi <simon.kaegi@gmail.com>
Add mglru, debugfs and psi to dragonball-experimental/mem_agent.conf to
support mem_agent function.
Fixes: #10625
Signed-off-by: Hui Zhu <teawater@antgroup.com>
KinD checks for the presence of this (and other) kernel configuration
via scripts like
https://blog.hypriot.com/post/verify-kernel-container-compatibility/ or
attempts to directly use /proc/sys/kernel/keys/ without checking to see
if it exists, causing an exit when it does not see it.
Docker/it's consumers apparently expect to be able to use the kernel
keyring and it's associated syscalls from/for containers.
There aren't any known downsides to enabling this except that it would
by definition enable additional syscalls defined in
https://man7.org/linux/man-pages/man7/keyrings.7.html which are
reachable from userspace. This minimally increases the attack surface of
the Kata Kernel, but this attack surface is minimal (especially since
the kernel is most likely being executed by some kind of hypervisor) and
highly restricted compared to the utility of enabling this feature to
get further containerization compatibility.
Signed-off-by: Crypt0s <BryanHalf@gmail.com>
Add CONFIG_PAGE_REPORTING, CONFIG_BALLOON_COMPACTION and
CONFIG_VIRTIO_BALLOON to dragonball-experimental configs to open
dragonball function and free page reporting function.
Signed-off-by: Hui Zhu <teawater@antgroup.com>
With Nvidia DPU or ConnectX network adapter, VF can do VFIO passthrough
to guest VM in `guest-kernel` mode. In the guest kernel, the adapter's
driver is required to claim the VFIO device and create network interface.
Signed-off-by: Lei Huang <leih@nvidia.com>
While enabling the attestation for IBM SE, it was observed that
a kernel config `CONFIG_S390_UV_UAPI` is missing.
This config is required to present an ultravisor in the guest VM.
Ths commit adds the missing config.
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
`CONFIG_TN3270_TTY` and `CONFIG_S390_AP_IOMMU` are dropped for s390x
in 6.7.x which is used for a confidential kernel.
But they are still used for a vanilla kernel. So we need to add them
to the whitelist.
Fixes: #9465
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
CONFIG_CRYPTO_ECDSA is not supported in older kernels such as 5.10.x
which may cause building broken problem if we build such kernel with
NVIDIA GPU in version 5.10.x
So this patch is to add CONFIG_CRYPTO_ECDSA into whitelist.conf to
avoid break building guest kernel with NVIDIA GPU.
Fixes: #9140
Signed-off-by: Alex Lyn <alex.lyn@antgroup.com>
- enable CONFIG_MTRR,CONFIG_X86_PAT on x86_64 for nvidia gpu
- optimize -f of build-kernel.sh, clean old kernel path and config before setup
- add kernel 5.16.x
Fixes: #9143
Signed-off-by: Jimmy-Xu <xjimmyshcn@gmail.com>
We're using a Kernel based on v6.7, which should include all te
patches needed for SEV / SNP / TDX.
By doing this, later on, we'll be able to stop building the specific
kernel for each one of the targets we have for the TEEs.
Let's note that we've introduced the "confidential" target for the
kernel builder script, while the TEE specific builds are being kept as
they're -- at least for now.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
add pci add and del guest kernel patch as the extension
in the upcall device manager server side.
also, dump config version to 120 since we need to add config
for dragonball pci in upcall
fixes: #8741
Signed-off-by: Gerry Liu <gerry@linux.alibaba.com>
Signed-off-by: Helin Guo <helinguo@linux.alibaba.com>
Signed-off-by: Chao Wu <chaowu@linux.alibaba.com>
The driver enables the userspace interface to communicate with the TDX
module to request the TDX guest details, like the attestation report.
Fixes: #8555
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Cloud Hypervisor exposes a VIRTIO_IOMMU device to the VM when IOMMU support is
enabled. We need to add it to the whitelist because dragonball uses kernel
v5.10 which restricted VIRTIO_IOMMU to ARM64 only.
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
Kernel v6.1.38 is the current latest LTS version, switch to it. No
patches should be necessary. Some CONFIG options have been removed:
- CONFIG_MEMCG_SWAP is covered by CONFIG_SWAP and CONFIG_MEMCG
- CONFIG_ARCH_RANDOM is unconditionally compiled in
- CONFIG_ARM64_CRYPTO is covered by CONFIG_CRYPTO and ARCH=arm64
Fixes: #6086
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
For the GPU CC use case we need to set several crypto algorithms.
The driver relies on them in the CC case.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Use now the sev.conf rather then the snp.conf.
Devices can be prestend in two different way in the
container (1) as vfio devices /dev/vfio/<num>
(2) the device is managed by whataever driver in
the VM kernel claims it.
Fixes: #6844
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Integrate initramfs into guest kernel as one binary,
which will be measured by the firmware together.
Fixes: #6674
Signed-off-by: Wang, Arron <arron.wang@intel.com>
Add required kernel config for dm-crypt/dm-integrity/dm-verity
and related crypto config.
Add userspace command line tools for disk encryption support
and ext4 file system utilities.
Fixes: #6674
Signed-off-by: Arron Wang <arron.wang@intel.com>
Let's update the Kernel TDX version to what's the latest tested release
of the Intel TDX tools with Kata Containers.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Adding kernel config to sev case since it is needed for SNP and SNP will use the SEV kernel.
Incrementing kernel config version to reflect changes
Fixes: #6123
Signed-off-by: Alex Carter <Alex.Carter@ibm.com>
For kata containers, rootfs is used in the read-only way.
EROFS can noticably decrease metadata overhead.
On the basis of supporting the EROFS file system, it supports using the config parameter to switch the file system used by rootfs.
Fixes: #6063
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: yaoyinnan <yaoyinnan@foxmail.com>
In order to let upcall being used by Kata Container, we need to add
those patches into kernel build script.
Currently, only when experimental (-e) and hypervisor type dragonball
(-t dragonball) are both enabled, that the upcall patches will be
applied to build a 5.10 guest kernel.
example commands: sh ./build-kernel.sh -e -t dragonball -d setup
fixes: #5642
Signed-off-by: Chao Wu <chaowu@linux.alibaba.com>
For now, rng init is too slow for kata3.0/dragonball. Enable
random_trust_cpu can speed up rng init when kernel boot.
Fixes: #5870
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Add kernel configs related to SELinux in order to add the
support for containers running inside the guest.
Fixes: #4812
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
