diff --git a/Godeps/Godeps.json b/Godeps/Godeps.json index 2eed302f35c..a74fd4cec9f 100644 --- a/Godeps/Godeps.json +++ b/Godeps/Godeps.json @@ -2844,10 +2844,6 @@ "ImportPath": "golang.org/x/tools/go/vcs", "Rev": "2382e3994d48b1d22acc2c86bcad0a2aff028e32" }, - { - "ImportPath": "google.golang.org/api/cloudkms/v1", - "Rev": "654f863362977d69086620b5f72f13e911da2410" - }, { "ImportPath": "google.golang.org/api/cloudmonitoring/v2beta2", "Rev": "654f863362977d69086620b5f72f13e911da2410" diff --git a/Godeps/LICENSES b/Godeps/LICENSES index 22907ade364..5992286c2e6 100644 --- a/Godeps/LICENSES +++ b/Godeps/LICENSES @@ -84789,41 +84789,6 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ================================================================================ -================================================================================ -= vendor/google.golang.org/api/cloudkms/v1 licensed under: = - -Copyright (c) 2011 Google Inc. All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are -met: - - * Redistributions of source code must retain the above copyright -notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above -copyright notice, this list of conditions and the following disclaimer -in the documentation and/or other materials provided with the -distribution. - * Neither the name of Google Inc. nor the names of its -contributors may be used to endorse or promote products derived from -this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -= vendor/google.golang.org/api/LICENSE a651bb3d8b1c412632e28823bb432b40 -================================================================================ - - ================================================================================ = vendor/google.golang.org/api/cloudmonitoring/v2beta2 licensed under: = diff --git a/cluster/gce/gci/configure-helper.sh b/cluster/gce/gci/configure-helper.sh index 8861eab17f5..251debda44c 100644 --- a/cluster/gce/gci/configure-helper.sh +++ b/cluster/gce/gci/configure-helper.sh @@ -1520,10 +1520,6 @@ function start-kube-apiserver { if [[ -n "${ENCRYPTION_PROVIDER_CONFIG:-}" ]]; then local encryption_provider_config_path="/etc/srv/kubernetes/encryption-provider-config.yml" - if [[ -n "${GOOGLE_CLOUD_KMS_CONFIG_FILE_NAME:-}" && -n "${GOOGLE_CLOUD_KMS_CONFIG:-}" ]]; then - echo "${GOOGLE_CLOUD_KMS_CONFIG}" | base64 --decode > "${GOOGLE_CLOUD_KMS_CONFIG_FILE_NAME}" - fi - echo "${ENCRYPTION_PROVIDER_CONFIG}" | base64 --decode > "${encryption_provider_config_path}" params+=" --experimental-encryption-provider-config=${encryption_provider_config_path}" fi diff --git a/cmd/kube-apiserver/app/server.go b/cmd/kube-apiserver/app/server.go index d83b368f5d8..e4a96a90bb3 100644 --- a/cmd/kube-apiserver/app/server.go +++ b/cmd/kube-apiserver/app/server.go @@ -265,13 +265,6 @@ func CreateKubeAPIServerConfig(s *options.ServerRunOptions, nodeTunneler tunnele return nil, nil, nil, nil, nil, utilerrors.NewAggregate(errs) } - if s.CloudProvider != nil { - // Initialize the cloudprovider once, to give it a chance to register KMS plugins, if any. - _, err := cloudprovider.InitCloudProvider(s.CloudProvider.CloudProvider, s.CloudProvider.CloudConfigFile) - if err != nil { - return nil, nil, nil, nil, nil, err - } - } genericConfig, sharedInformers, versionedInformers, insecureServingOptions, serviceResolver, err := BuildGenericConfig(s, proxyTransport) if err != nil { return nil, nil, nil, nil, nil, err diff --git a/pkg/cloudprovider/providers/gce/BUILD b/pkg/cloudprovider/providers/gce/BUILD index fd154be5e64..d68e1a8f8eb 100644 --- a/pkg/cloudprovider/providers/gce/BUILD +++ b/pkg/cloudprovider/providers/gce/BUILD @@ -40,7 +40,6 @@ go_library( "gce_urlmap.go", "gce_util.go", "gce_zones.go", - "kms.go", "metrics.go", "token_source.go", ], @@ -61,7 +60,6 @@ go_library( "//vendor/github.com/prometheus/client_golang/prometheus:go_default_library", "//vendor/golang.org/x/oauth2:go_default_library", "//vendor/golang.org/x/oauth2/google:go_default_library", - "//vendor/google.golang.org/api/cloudkms/v1:go_default_library", "//vendor/google.golang.org/api/compute/v0.alpha:go_default_library", "//vendor/google.golang.org/api/compute/v0.beta:go_default_library", "//vendor/google.golang.org/api/compute/v1:go_default_library", @@ -77,8 +75,6 @@ go_library( "//vendor/k8s.io/apimachinery/pkg/util/sets:go_default_library", "//vendor/k8s.io/apimachinery/pkg/util/wait:go_default_library", "//vendor/k8s.io/apimachinery/pkg/watch:go_default_library", - "//vendor/k8s.io/apiserver/pkg/server/options/encryptionconfig:go_default_library", - "//vendor/k8s.io/apiserver/pkg/storage/value/encrypt/envelope:go_default_library", "//vendor/k8s.io/client-go/kubernetes:go_default_library", "//vendor/k8s.io/client-go/kubernetes/scheme:go_default_library", "//vendor/k8s.io/client-go/kubernetes/typed/core/v1:go_default_library", diff --git a/pkg/cloudprovider/providers/gce/gce.go b/pkg/cloudprovider/providers/gce/gce.go index 43b20d04f8b..f86865c4db6 100644 --- a/pkg/cloudprovider/providers/gce/gce.go +++ b/pkg/cloudprovider/providers/gce/gce.go @@ -34,8 +34,6 @@ import ( "k8s.io/api/core/v1" "k8s.io/apimachinery/pkg/util/sets" "k8s.io/apimachinery/pkg/util/wait" - "k8s.io/apiserver/pkg/server/options/encryptionconfig" - "k8s.io/apiserver/pkg/storage/value/encrypt/envelope" clientset "k8s.io/client-go/kubernetes" "k8s.io/client-go/kubernetes/scheme" v1core "k8s.io/client-go/kubernetes/typed/core/v1" @@ -48,7 +46,6 @@ import ( "github.com/golang/glog" "golang.org/x/oauth2" "golang.org/x/oauth2/google" - cloudkms "google.golang.org/api/cloudkms/v1" computealpha "google.golang.org/api/compute/v0.alpha" computebeta "google.golang.org/api/compute/v0.beta" compute "google.golang.org/api/compute/v1" @@ -106,7 +103,6 @@ type GCECloud struct { serviceBeta *computebeta.Service serviceAlpha *computealpha.Service containerService *container.Service - cloudkmsService *cloudkms.Service client clientset.Interface clientBuilder controller.ControllerClientBuilder eventBroadcaster record.EventBroadcaster @@ -195,10 +191,6 @@ type CloudConfig struct { AlphaFeatureGate *AlphaFeatureGate } -// kmsPluginRegisterOnce prevents the cloudprovider from registering its KMS plugin -// more than once in the KMS plugin registry. -var kmsPluginRegisterOnce sync.Once - func init() { cloudprovider.RegisterCloudProvider( ProviderName, @@ -212,11 +204,6 @@ func (g *GCECloud) GetComputeService() *compute.Service { return g.service } -// Raw access to the cloudkmsService of GCE cloud. Required for encryption of etcd using Google KMS. -func (g *GCECloud) GetKMSService() *cloudkms.Service { - return g.cloudkmsService -} - // newGCECloud creates a new instance of GCECloud. func newGCECloud(config io.Reader) (gceCloud *GCECloud, err error) { var cloudConfig *CloudConfig @@ -404,12 +391,6 @@ func CreateGCECloud(config *CloudConfig) (*GCECloud, error) { } containerService.UserAgent = userAgent - cloudkmsService, err := cloudkms.New(client) - if err != nil { - return nil, err - } - cloudkmsService.UserAgent = userAgent - // ProjectID and.NetworkProjectID may be project number or name. projID, netProjID := tryConvertToProjectNames(config.ProjectID, config.NetworkProjectID, service) onXPN := projID != netProjID @@ -474,7 +455,6 @@ func CreateGCECloud(config *CloudConfig) (*GCECloud, error) { serviceAlpha: serviceAlpha, serviceBeta: serviceBeta, containerService: containerService, - cloudkmsService: cloudkmsService, projectID: projID, networkProjectID: netProjID, onXPN: onXPN, @@ -494,14 +474,6 @@ func CreateGCECloud(config *CloudConfig) (*GCECloud, error) { gce.manager = &gceServiceManager{gce} - // Registering the KMS plugin only the first time. - kmsPluginRegisterOnce.Do(func() { - // Register the Google Cloud KMS based service in the KMS plugin registry. - encryptionconfig.KMSPluginRegistry.Register(KMSServiceName, func(config io.Reader) (envelope.Service, error) { - return gce.getGCPCloudKMSService(config) - }) - }) - return gce, nil } diff --git a/pkg/cloudprovider/providers/gce/kms.go b/pkg/cloudprovider/providers/gce/kms.go deleted file mode 100644 index fbe62f523b5..00000000000 --- a/pkg/cloudprovider/providers/gce/kms.go +++ /dev/null @@ -1,167 +0,0 @@ -/* -Copyright 2017 The Kubernetes Authors. - -Licensed under the Apache License, Version 2.0 (the "License"); -you may not use this file except in compliance with the License. -You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - -Unless required by applicable law or agreed to in writing, software -distributed under the License is distributed on an "AS IS" BASIS, -WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -See the License for the specific language governing permissions and -limitations under the License. -*/ - -package gce - -import ( - "encoding/base64" - "fmt" - "io" - - "github.com/golang/glog" - cloudkms "google.golang.org/api/cloudkms/v1" - "google.golang.org/api/googleapi" - gcfg "gopkg.in/gcfg.v1" - "k8s.io/apiserver/pkg/storage/value/encrypt/envelope" -) - -const ( - // KMSServiceName is the name of the cloudkms provider registered by this cloud. - KMSServiceName = "gcp-cloudkms" - - defaultGKMSKeyRing = "google-container-engine" - defaultGKMSKeyRingLocation = "global" -) - -// gkmsConfig contains the GCE specific KMS configuration for setting up a KMS connection. -type gkmsConfig struct { - Global struct { - // location is the KMS location of the KeyRing to be used for encryption. - // It can be found by checking the available KeyRings in the IAM UI. - // This is not the same as the GCP location of the project. - // +optional - Location string `gcfg:"kms-location"` - // keyRing is the keyRing of the hosted key to be used. The default value is "google-kubernetes". - // +optional - KeyRing string `gcfg:"kms-keyring"` - // cryptoKey is the name of the key to be used for encryption of Data-Encryption-Keys. - CryptoKey string `gcfg:"kms-cryptokey"` - } -} - -// readGCPCloudKMSConfig parses and returns the configuration parameters for Google Cloud KMS. -func readGCPCloudKMSConfig(reader io.Reader) (*gkmsConfig, error) { - cfg := &gkmsConfig{} - if err := gcfg.FatalOnly(gcfg.ReadInto(cfg, reader)); err != nil { - glog.Errorf("Couldn't read Google Cloud KMS config: %v", err) - return nil, err - } - return cfg, nil -} - -// gkmsService provides Encrypt and Decrypt methods which allow cryptographic operations -// using Google Cloud KMS service. -type gkmsService struct { - parentName string - cloudkmsService *cloudkms.Service -} - -// getGCPCloudKMSService provides a Google Cloud KMS based implementation of envelope.Service. -func (gce *GCECloud) getGCPCloudKMSService(config io.Reader) (envelope.Service, error) { - kmsConfig, err := readGCPCloudKMSConfig(config) - if err != nil { - return nil, err - } - - // Hosting on GCE/GKE with Google KMS encryption provider - cloudkmsService := gce.GetKMSService() - - // Set defaults for location and keyRing. - location := kmsConfig.Global.Location - if len(location) == 0 { - location = defaultGKMSKeyRingLocation - } - keyRing := kmsConfig.Global.KeyRing - if len(keyRing) == 0 { - keyRing = defaultGKMSKeyRing - } - - cryptoKey := kmsConfig.Global.CryptoKey - if len(cryptoKey) == 0 { - return nil, fmt.Errorf("missing cryptoKey for cloudprovided KMS: " + KMSServiceName) - } - - parentName := fmt.Sprintf("projects/%s/locations/%s", gce.projectID, location) - - // Create the keyRing if it does not exist yet - _, err = cloudkmsService.Projects.Locations.KeyRings.Create(parentName, - &cloudkms.KeyRing{}).KeyRingId(keyRing).Do() - if err != nil && unrecoverableCreationError(err) { - return nil, err - } - parentName = parentName + "/keyRings/" + keyRing - - // Create the cryptoKey if it does not exist yet - _, err = cloudkmsService.Projects.Locations.KeyRings.CryptoKeys.Create(parentName, - &cloudkms.CryptoKey{ - Purpose: "ENCRYPT_DECRYPT", - }).CryptoKeyId(cryptoKey).Do() - if err != nil && unrecoverableCreationError(err) { - return nil, err - } - parentName = parentName + "/cryptoKeys/" + cryptoKey - - service := &gkmsService{ - parentName: parentName, - cloudkmsService: cloudkmsService, - } - - // Sanity check before startup. For non-GCP clusters, the user's account may not have permissions to create - // the key. We need to verify the existence of the key before apiserver startup. - _, err = service.Encrypt([]byte("test")) - if err != nil { - return nil, fmt.Errorf("failed to encrypt data using Google cloudkms, using key %s. Ensure that the keyRing and cryptoKey exist. Got error: %v", parentName, err) - } - - return service, nil -} - -// Decrypt decrypts a base64 representation of encrypted bytes. -func (t *gkmsService) Decrypt(data string) ([]byte, error) { - resp, err := t.cloudkmsService.Projects.Locations.KeyRings.CryptoKeys. - Decrypt(t.parentName, &cloudkms.DecryptRequest{ - Ciphertext: data, - }).Do() - if err != nil { - return nil, err - } - return base64.StdEncoding.DecodeString(resp.Plaintext) -} - -// Encrypt encrypts bytes, and returns base64 representation of the ciphertext. -func (t *gkmsService) Encrypt(data []byte) (string, error) { - resp, err := t.cloudkmsService.Projects.Locations.KeyRings.CryptoKeys. - Encrypt(t.parentName, &cloudkms.EncryptRequest{ - Plaintext: base64.StdEncoding.EncodeToString(data), - }).Do() - if err != nil { - return "", err - } - return resp.Ciphertext, nil -} - -// unrecoverableCreationError decides if Kubernetes should ignore the encountered Google KMS -// error. Only to be used for errors seen while creating a KeyRing or CryptoKey. -func unrecoverableCreationError(err error) bool { - apiError, isAPIError := err.(*googleapi.Error) - // 409 means the object exists. - // 403 means we do not have permission to create the object, the user must do it. - // Else, it is an unrecoverable error. - if !isAPIError || (apiError.Code != 409 && apiError.Code != 403) { - return true - } - return false -} diff --git a/vendor/BUILD b/vendor/BUILD index d09dd42ac02..42b42faa2ad 100644 --- a/vendor/BUILD +++ b/vendor/BUILD @@ -370,7 +370,6 @@ filegroup( "//vendor/golang.org/x/time/rate:all-srcs", "//vendor/golang.org/x/tools/container/intsets:all-srcs", "//vendor/golang.org/x/tools/go/vcs:all-srcs", - "//vendor/google.golang.org/api/cloudkms/v1:all-srcs", "//vendor/google.golang.org/api/cloudmonitoring/v2beta2:all-srcs", "//vendor/google.golang.org/api/compute/v0.alpha:all-srcs", "//vendor/google.golang.org/api/compute/v0.beta:all-srcs", diff --git a/vendor/google.golang.org/api/cloudkms/v1/BUILD b/vendor/google.golang.org/api/cloudkms/v1/BUILD deleted file mode 100644 index fe248b259b1..00000000000 --- a/vendor/google.golang.org/api/cloudkms/v1/BUILD +++ /dev/null @@ -1,28 +0,0 @@ -load("@io_bazel_rules_go//go:def.bzl", "go_library") - -go_library( - name = "go_default_library", - srcs = ["cloudkms-gen.go"], - importpath = "google.golang.org/api/cloudkms/v1", - visibility = ["//visibility:public"], - deps = [ - "//vendor/golang.org/x/net/context:go_default_library", - "//vendor/golang.org/x/net/context/ctxhttp:go_default_library", - "//vendor/google.golang.org/api/gensupport:go_default_library", - "//vendor/google.golang.org/api/googleapi:go_default_library", - ], -) - -filegroup( - name = "package-srcs", - srcs = glob(["**"]), - tags = ["automanaged"], - visibility = ["//visibility:private"], -) - -filegroup( - name = "all-srcs", - srcs = [":package-srcs"], - tags = ["automanaged"], - visibility = ["//visibility:public"], -) diff --git a/vendor/google.golang.org/api/cloudkms/v1/cloudkms-api.json b/vendor/google.golang.org/api/cloudkms/v1/cloudkms-api.json deleted file mode 100644 index 73371c8b879..00000000000 --- a/vendor/google.golang.org/api/cloudkms/v1/cloudkms-api.json +++ /dev/null @@ -1,1353 +0,0 @@ -{ - "ownerDomain": "google.com", - "name": "cloudkms", - "batchPath": "batch", - "title": "Google Cloud Key Management Service (KMS) API", - "ownerName": "Google", - "resources": { - "projects": { - "resources": { - "locations": { - "methods": { - "get": { - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}", - "id": "cloudkms.projects.locations.get", - "path": "v1/{+name}", - "description": "Get information about a location.", - "response": { - "$ref": "Location" - }, - "parameterOrder": [ - "name" - ], - "httpMethod": "GET", - "parameters": { - "name": { - "description": "Resource name for the location.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+$", - "location": "path" - } - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ] - }, - "list": { - "description": "Lists information about the supported locations for this service.", - "response": { - "$ref": "ListLocationsResponse" - }, - "parameterOrder": [ - "name" - ], - "httpMethod": "GET", - "parameters": { - "pageSize": { - "location": "query", - "format": "int32", - "description": "The standard list page size.", - "type": "integer" - }, - "filter": { - "description": "The standard list filter.", - "type": "string", - "location": "query" - }, - "pageToken": { - "description": "The standard list page token.", - "type": "string", - "location": "query" - }, - "name": { - "description": "The resource that owns the locations collection, if applicable.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+$", - "location": "path" - } - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "flatPath": "v1/projects/{projectsId}/locations", - "id": "cloudkms.projects.locations.list", - "path": "v1/{+name}/locations" - } - }, - "resources": { - "keyRings": { - "methods": { - "list": { - "description": "Lists KeyRings.", - "response": { - "$ref": "ListKeyRingsResponse" - }, - "parameterOrder": [ - "parent" - ], - "httpMethod": "GET", - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "parameters": { - "pageToken": { - "description": "Optional pagination token, returned earlier via\nListKeyRingsResponse.next_page_token.", - "type": "string", - "location": "query" - }, - "pageSize": { - "format": "int32", - "description": "Optional limit on the number of KeyRings to include in the\nresponse. Further KeyRings can subsequently be obtained by\nincluding the ListKeyRingsResponse.next_page_token in a subsequent\nrequest. If unspecified, the server will pick an appropriate default.", - "type": "integer", - "location": "query" - }, - "parent": { - "location": "path", - "description": "Required. The resource name of the location associated with the\nKeyRings, in the format `projects/*/locations/*`.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+$" - } - }, - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings", - "id": "cloudkms.projects.locations.keyRings.list", - "path": "v1/{+parent}/keyRings" - }, - "setIamPolicy": { - "httpMethod": "POST", - "parameterOrder": [ - "resource" - ], - "response": { - "$ref": "Policy" - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "parameters": { - "resource": { - "description": "REQUIRED: The resource for which the policy is being specified.\nSee the operation documentation for the appropriate value for this field.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+$", - "location": "path" - } - }, - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}:setIamPolicy", - "path": "v1/{+resource}:setIamPolicy", - "id": "cloudkms.projects.locations.keyRings.setIamPolicy", - "request": { - "$ref": "SetIamPolicyRequest" - }, - "description": "Sets the access control policy on the specified resource. Replaces any\nexisting policy." - }, - "create": { - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings", - "path": "v1/{+parent}/keyRings", - "id": "cloudkms.projects.locations.keyRings.create", - "request": { - "$ref": "KeyRing" - }, - "description": "Create a new KeyRing in a given Project and Location.", - "httpMethod": "POST", - "parameterOrder": [ - "parent" - ], - "response": { - "$ref": "KeyRing" - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "parameters": { - "keyRingId": { - "description": "Required. It must be unique within a location and match the regular\nexpression `[a-zA-Z0-9_-]{1,63}`", - "type": "string", - "location": "query" - }, - "parent": { - "description": "Required. The resource name of the location associated with the\nKeyRings, in the format `projects/*/locations/*`.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+$", - "location": "path" - } - } - }, - "getIamPolicy": { - "response": { - "$ref": "Policy" - }, - "parameterOrder": [ - "resource" - ], - "httpMethod": "GET", - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "parameters": { - "resource": { - "description": "REQUIRED: The resource for which the policy is being requested.\nSee the operation documentation for the appropriate value for this field.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+$", - "location": "path" - } - }, - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}:getIamPolicy", - "id": "cloudkms.projects.locations.keyRings.getIamPolicy", - "path": "v1/{+resource}:getIamPolicy", - "description": "Gets the access control policy for a resource.\nReturns an empty policy if the resource exists and does not have a policy\nset." - }, - "get": { - "description": "Returns metadata for a given KeyRing.", - "response": { - "$ref": "KeyRing" - }, - "parameterOrder": [ - "name" - ], - "httpMethod": "GET", - "parameters": { - "name": { - "description": "The name of the KeyRing to get.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+$", - "location": "path" - } - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}", - "id": "cloudkms.projects.locations.keyRings.get", - "path": "v1/{+name}" - }, - "testIamPermissions": { - "request": { - "$ref": "TestIamPermissionsRequest" - }, - "description": "Returns permissions that a caller has on the specified resource.\nIf the resource does not exist, this will return an empty set of\npermissions, not a NOT_FOUND error.\n\nNote: This operation is designed to be used for building permission-aware\nUIs and command-line tools, not for authorization checking. This operation\nmay \"fail open\" without warning.", - "response": { - "$ref": "TestIamPermissionsResponse" - }, - "parameterOrder": [ - "resource" - ], - "httpMethod": "POST", - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "parameters": { - "resource": { - "location": "path", - "description": "REQUIRED: The resource for which the policy detail is being requested.\nSee the operation documentation for the appropriate value for this field.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+$" - } - }, - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}:testIamPermissions", - "id": "cloudkms.projects.locations.keyRings.testIamPermissions", - "path": "v1/{+resource}:testIamPermissions" - } - }, - "resources": { - "cryptoKeys": { - "methods": { - "testIamPermissions": { - "response": { - "$ref": "TestIamPermissionsResponse" - }, - "parameterOrder": [ - "resource" - ], - "httpMethod": "POST", - "parameters": { - "resource": { - "description": "REQUIRED: The resource for which the policy detail is being requested.\nSee the operation documentation for the appropriate value for this field.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - "location": "path" - } - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}:testIamPermissions", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.testIamPermissions", - "path": "v1/{+resource}:testIamPermissions", - "description": "Returns permissions that a caller has on the specified resource.\nIf the resource does not exist, this will return an empty set of\npermissions, not a NOT_FOUND error.\n\nNote: This operation is designed to be used for building permission-aware\nUIs and command-line tools, not for authorization checking. This operation\nmay \"fail open\" without warning.", - "request": { - "$ref": "TestIamPermissionsRequest" - } - }, - "decrypt": { - "response": { - "$ref": "DecryptResponse" - }, - "parameterOrder": [ - "name" - ], - "httpMethod": "POST", - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "parameters": { - "name": { - "description": "Required. The resource name of the CryptoKey to use for decryption.\nThe server will choose the appropriate version.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - "location": "path" - } - }, - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}:decrypt", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.decrypt", - "path": "v1/{+name}:decrypt", - "request": { - "$ref": "DecryptRequest" - }, - "description": "Decrypts data that was protected by Encrypt." - }, - "list": { - "description": "Lists CryptoKeys.", - "response": { - "$ref": "ListCryptoKeysResponse" - }, - "parameterOrder": [ - "parent" - ], - "httpMethod": "GET", - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "parameters": { - "pageToken": { - "location": "query", - "description": "Optional pagination token, returned earlier via\nListCryptoKeysResponse.next_page_token.", - "type": "string" - }, - "pageSize": { - "format": "int32", - "description": "Optional limit on the number of CryptoKeys to include in the\nresponse. Further CryptoKeys can subsequently be obtained by\nincluding the ListCryptoKeysResponse.next_page_token in a subsequent\nrequest. If unspecified, the server will pick an appropriate default.", - "type": "integer", - "location": "query" - }, - "parent": { - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+$", - "location": "path", - "description": "Required. The resource name of the KeyRing to list, in the format\n`projects/*/locations/*/keyRings/*`.", - "type": "string", - "required": true - } - }, - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.list", - "path": "v1/{+parent}/cryptoKeys" - }, - "encrypt": { - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}:encrypt", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.encrypt", - "path": "v1/{+name}:encrypt", - "request": { - "$ref": "EncryptRequest" - }, - "description": "Encrypts data, so that it can only be recovered by a call to Decrypt.", - "response": { - "$ref": "EncryptResponse" - }, - "parameterOrder": [ - "name" - ], - "httpMethod": "POST", - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "parameters": { - "name": { - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/.+$", - "location": "path", - "description": "Required. The resource name of the CryptoKey or CryptoKeyVersion\nto use for encryption.\n\nIf a CryptoKey is specified, the server will use its\nprimary version.", - "type": "string", - "required": true - } - } - }, - "create": { - "httpMethod": "POST", - "parameterOrder": [ - "parent" - ], - "response": { - "$ref": "CryptoKey" - }, - "parameters": { - "parent": { - "location": "path", - "description": "Required. The name of the KeyRing associated with the\nCryptoKeys.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+$" - }, - "cryptoKeyId": { - "description": "Required. It must be unique within a KeyRing and match the regular\nexpression `[a-zA-Z0-9_-]{1,63}`", - "type": "string", - "location": "query" - } - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys", - "path": "v1/{+parent}/cryptoKeys", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.create", - "description": "Create a new CryptoKey within a KeyRing.\n\nCryptoKey.purpose is required.", - "request": { - "$ref": "CryptoKey" - } - }, - "setIamPolicy": { - "description": "Sets the access control policy on the specified resource. Replaces any\nexisting policy.", - "request": { - "$ref": "SetIamPolicyRequest" - }, - "response": { - "$ref": "Policy" - }, - "parameterOrder": [ - "resource" - ], - "httpMethod": "POST", - "parameters": { - "resource": { - "description": "REQUIRED: The resource for which the policy is being specified.\nSee the operation documentation for the appropriate value for this field.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - "location": "path" - } - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}:setIamPolicy", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.setIamPolicy", - "path": "v1/{+resource}:setIamPolicy" - }, - "updatePrimaryVersion": { - "description": "Update the version of a CryptoKey that will be used in Encrypt", - "request": { - "$ref": "UpdateCryptoKeyPrimaryVersionRequest" - }, - "response": { - "$ref": "CryptoKey" - }, - "parameterOrder": [ - "name" - ], - "httpMethod": "POST", - "parameters": { - "name": { - "description": "The resource name of the CryptoKey to update.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - "location": "path" - } - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}:updatePrimaryVersion", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.updatePrimaryVersion", - "path": "v1/{+name}:updatePrimaryVersion" - }, - "getIamPolicy": { - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}:getIamPolicy", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.getIamPolicy", - "path": "v1/{+resource}:getIamPolicy", - "description": "Gets the access control policy for a resource.\nReturns an empty policy if the resource exists and does not have a policy\nset.", - "response": { - "$ref": "Policy" - }, - "parameterOrder": [ - "resource" - ], - "httpMethod": "GET", - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "parameters": { - "resource": { - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - "location": "path", - "description": "REQUIRED: The resource for which the policy is being requested.\nSee the operation documentation for the appropriate value for this field.", - "type": "string", - "required": true - } - } - }, - "get": { - "description": "Returns metadata for a given CryptoKey, as well as its\nprimary CryptoKeyVersion.", - "response": { - "$ref": "CryptoKey" - }, - "httpMethod": "GET", - "parameterOrder": [ - "name" - ], - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "parameters": { - "name": { - "location": "path", - "description": "The name of the CryptoKey to get.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$" - } - }, - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.get", - "path": "v1/{+name}" - }, - "patch": { - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.patch", - "path": "v1/{+name}", - "request": { - "$ref": "CryptoKey" - }, - "description": "Update a CryptoKey.", - "response": { - "$ref": "CryptoKey" - }, - "parameterOrder": [ - "name" - ], - "httpMethod": "PATCH", - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "parameters": { - "updateMask": { - "format": "google-fieldmask", - "description": "Required list of fields to be updated in this request.", - "type": "string", - "location": "query" - }, - "name": { - "description": "Output only. The resource name for this CryptoKey in the format\n`projects/*/locations/*/keyRings/*/cryptoKeys/*`.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - "location": "path" - } - }, - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}" - } - }, - "resources": { - "cryptoKeyVersions": { - "methods": { - "list": { - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}/cryptoKeyVersions", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.list", - "path": "v1/{+parent}/cryptoKeyVersions", - "description": "Lists CryptoKeyVersions.", - "response": { - "$ref": "ListCryptoKeyVersionsResponse" - }, - "parameterOrder": [ - "parent" - ], - "httpMethod": "GET", - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "parameters": { - "pageToken": { - "location": "query", - "description": "Optional pagination token, returned earlier via\nListCryptoKeyVersionsResponse.next_page_token.", - "type": "string" - }, - "pageSize": { - "format": "int32", - "description": "Optional limit on the number of CryptoKeyVersions to\ninclude in the response. Further CryptoKeyVersions can\nsubsequently be obtained by including the\nListCryptoKeyVersionsResponse.next_page_token in a subsequent request.\nIf unspecified, the server will pick an appropriate default.", - "type": "integer", - "location": "query" - }, - "parent": { - "location": "path", - "description": "Required. The resource name of the CryptoKey to list, in the format\n`projects/*/locations/*/keyRings/*/cryptoKeys/*`.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$" - } - } - }, - "destroy": { - "response": { - "$ref": "CryptoKeyVersion" - }, - "parameterOrder": [ - "name" - ], - "httpMethod": "POST", - "parameters": { - "name": { - "location": "path", - "description": "The resource name of the CryptoKeyVersion to destroy.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+/cryptoKeyVersions/[^/]+$" - } - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}/cryptoKeyVersions/{cryptoKeyVersionsId}:destroy", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.destroy", - "path": "v1/{+name}:destroy", - "description": "Schedule a CryptoKeyVersion for destruction.\n\nUpon calling this method, CryptoKeyVersion.state will be set to\nDESTROY_SCHEDULED\nand destroy_time will be set to a time 24\nhours in the future, at which point the state\nwill be changed to\nDESTROYED, and the key\nmaterial will be irrevocably destroyed.\n\nBefore the destroy_time is reached,\nRestoreCryptoKeyVersion may be called to reverse the process.", - "request": { - "$ref": "DestroyCryptoKeyVersionRequest" - } - }, - "create": { - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.create", - "path": "v1/{+parent}/cryptoKeyVersions", - "description": "Create a new CryptoKeyVersion in a CryptoKey.\n\nThe server will assign the next sequential id. If unset,\nstate will be set to\nENABLED.", - "request": { - "$ref": "CryptoKeyVersion" - }, - "response": { - "$ref": "CryptoKeyVersion" - }, - "parameterOrder": [ - "parent" - ], - "httpMethod": "POST", - "parameters": { - "parent": { - "location": "path", - "description": "Required. The name of the CryptoKey associated with\nthe CryptoKeyVersions.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$" - } - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}/cryptoKeyVersions" - }, - "restore": { - "description": "Restore a CryptoKeyVersion in the\nDESTROY_SCHEDULED,\nstate.\n\nUpon restoration of the CryptoKeyVersion, state\nwill be set to DISABLED,\nand destroy_time will be cleared.", - "request": { - "$ref": "RestoreCryptoKeyVersionRequest" - }, - "httpMethod": "POST", - "parameterOrder": [ - "name" - ], - "response": { - "$ref": "CryptoKeyVersion" - }, - "parameters": { - "name": { - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+/cryptoKeyVersions/[^/]+$", - "location": "path", - "description": "The resource name of the CryptoKeyVersion to restore.", - "type": "string", - "required": true - } - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}/cryptoKeyVersions/{cryptoKeyVersionsId}:restore", - "path": "v1/{+name}:restore", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.restore" - }, - "patch": { - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}/cryptoKeyVersions/{cryptoKeyVersionsId}", - "path": "v1/{+name}", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.patch", - "description": "Update a CryptoKeyVersion's metadata.\n\nstate may be changed between\nENABLED and\nDISABLED using this\nmethod. See DestroyCryptoKeyVersion and RestoreCryptoKeyVersion to\nmove between other states.", - "request": { - "$ref": "CryptoKeyVersion" - }, - "httpMethod": "PATCH", - "parameterOrder": [ - "name" - ], - "response": { - "$ref": "CryptoKeyVersion" - }, - "parameters": { - "updateMask": { - "format": "google-fieldmask", - "description": "Required list of fields to be updated in this request.", - "type": "string", - "location": "query" - }, - "name": { - "description": "Output only. The resource name for this CryptoKeyVersion in the format\n`projects/*/locations/*/keyRings/*/cryptoKeys/*/cryptoKeyVersions/*`.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+/cryptoKeyVersions/[^/]+$", - "location": "path" - } - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ] - }, - "get": { - "response": { - "$ref": "CryptoKeyVersion" - }, - "parameterOrder": [ - "name" - ], - "httpMethod": "GET", - "parameters": { - "name": { - "description": "The name of the CryptoKeyVersion to get.", - "type": "string", - "required": true, - "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+/cryptoKeyVersions/[^/]+$", - "location": "path" - } - }, - "scopes": [ - "https://www.googleapis.com/auth/cloud-platform" - ], - "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}/cryptoKeyVersions/{cryptoKeyVersionsId}", - "id": "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.get", - "path": "v1/{+name}", - "description": "Returns metadata for a given CryptoKeyVersion." - } - } - } - } - } - } - } - } - } - } - } - }, - "parameters": { - "upload_protocol": { - "description": "Upload protocol for media (e.g. \"raw\", \"multipart\").", - "type": "string", - "location": "query" - }, - "prettyPrint": { - "location": "query", - "description": "Returns response with indentations and line breaks.", - "default": "true", - "type": "boolean" - }, - "uploadType": { - "location": "query", - "description": "Legacy upload protocol for media (e.g. \"media\", \"multipart\").", - "type": "string" - }, - "fields": { - "location": "query", - "description": "Selector specifying which fields to include in a partial response.", - "type": "string" - }, - "callback": { - "description": "JSONP", - "type": "string", - "location": "query" - }, - "$.xgafv": { - "description": "V1 error format.", - "type": "string", - "enumDescriptions": [ - "v1 error format", - "v2 error format" - ], - "location": "query", - "enum": [ - "1", - "2" - ] - }, - "alt": { - "enumDescriptions": [ - "Responses with Content-Type of application/json", - "Media download with context-dependent Content-Type", - "Responses with Content-Type of application/x-protobuf" - ], - "location": "query", - "description": "Data format for response.", - "default": "json", - "enum": [ - "json", - "media", - "proto" - ], - "type": "string" - }, - "key": { - "description": "API key. Your API key identifies your project and provides you with API access, quota, and reports. Required unless you provide an OAuth 2.0 token.", - "type": "string", - "location": "query" - }, - "access_token": { - "description": "OAuth access token.", - "type": "string", - "location": "query" - }, - "quotaUser": { - "description": "Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a user, but should not exceed 40 characters.", - "type": "string", - "location": "query" - }, - "pp": { - "description": "Pretty-print response.", - "default": "true", - "type": "boolean", - "location": "query" - }, - "oauth_token": { - "description": "OAuth 2.0 token for the current user.", - "type": "string", - "location": "query" - }, - "bearer_token": { - "description": "OAuth bearer token.", - "type": "string", - "location": "query" - } - }, - "version": "v1", - "baseUrl": "https://cloudkms.googleapis.com/", - "kind": "discovery#restDescription", - "description": "Manages encryption for your cloud services the same way you do on-premises. You can generate, use, rotate, and destroy AES256 encryption keys.", - "servicePath": "", - "basePath": "", - "revision": "20170904", - "documentationLink": "https://cloud.google.com/kms/", - "id": "cloudkms:v1", - "discoveryVersion": "v1", - "version_module": true, - "schemas": { - "CryptoKeyVersion": { - "description": "A CryptoKeyVersion represents an individual cryptographic key, and the\nassociated key material.\n\nIt can be used for cryptographic operations either directly, or via its\nparent CryptoKey, in which case the server will choose the appropriate\nversion for the operation.\n\nFor security reasons, the raw cryptographic key material represented by a\nCryptoKeyVersion can never be viewed or exported. It can only be used to\nencrypt or decrypt data when an authorized user or application invokes Cloud\nKMS.", - "type": "object", - "properties": { - "state": { - "description": "The current state of the CryptoKeyVersion.", - "type": "string", - "enumDescriptions": [ - "Not specified.", - "This version may be used in Encrypt and\nDecrypt requests.", - "This version may not be used, but the key material is still available,\nand the version can be placed back into the ENABLED state.", - "This version is destroyed, and the key material is no longer stored.\nA version may not leave this state once entered.", - "This version is scheduled for destruction, and will be destroyed soon.\nCall\nRestoreCryptoKeyVersion\nto put it back into the DISABLED state." - ], - "enum": [ - "CRYPTO_KEY_VERSION_STATE_UNSPECIFIED", - "ENABLED", - "DISABLED", - "DESTROYED", - "DESTROY_SCHEDULED" - ] - }, - "name": { - "description": "Output only. The resource name for this CryptoKeyVersion in the format\n`projects/*/locations/*/keyRings/*/cryptoKeys/*/cryptoKeyVersions/*`.", - "type": "string" - }, - "destroyEventTime": { - "format": "google-datetime", - "description": "Output only. The time this CryptoKeyVersion's key material was\ndestroyed. Only present if state is\nDESTROYED.", - "type": "string" - }, - "destroyTime": { - "format": "google-datetime", - "description": "Output only. The time this CryptoKeyVersion's key material is scheduled\nfor destruction. Only present if state is\nDESTROY_SCHEDULED.", - "type": "string" - }, - "createTime": { - "format": "google-datetime", - "description": "Output only. The time at which this CryptoKeyVersion was created.", - "type": "string" - } - }, - "id": "CryptoKeyVersion" - }, - "SetIamPolicyRequest": { - "description": "Request message for `SetIamPolicy` method.", - "type": "object", - "properties": { - "updateMask": { - "format": "google-fieldmask", - "description": "OPTIONAL: A FieldMask specifying which fields of the policy to modify. Only\nthe fields in the mask will be modified. If no mask is provided, the\nfollowing default mask is used:\npaths: \"bindings, etag\"\nThis field is only used by Cloud IAM.", - "type": "string" - }, - "policy": { - "$ref": "Policy", - "description": "REQUIRED: The complete policy to be applied to the `resource`. The size of\nthe policy is limited to a few 10s of KB. An empty policy is a\nvalid policy but certain Cloud Platform services (such as Projects)\nmight reject them." - } - }, - "id": "SetIamPolicyRequest" - }, - "DecryptRequest": { - "description": "Request message for KeyManagementService.Decrypt.", - "type": "object", - "properties": { - "additionalAuthenticatedData": { - "format": "byte", - "description": "Optional data that must match the data originally supplied in\nEncryptRequest.additional_authenticated_data.", - "type": "string" - }, - "ciphertext": { - "format": "byte", - "description": "Required. The encrypted data originally returned in\nEncryptResponse.ciphertext.", - "type": "string" - } - }, - "id": "DecryptRequest" - }, - "Binding": { - "properties": { - "condition": { - "$ref": "Expr", - "description": "The condition that is associated with this binding.\nNOTE: an unsatisfied condition will not allow user access via current\nbinding. Different bindings, including their conditions, are examined\nindependently.\nThis field is GOOGLE_INTERNAL." - }, - "members": { - "description": "Specifies the identities requesting access for a Cloud Platform resource.\n`members` can have the following values:\n\n* `allUsers`: A special identifier that represents anyone who is\n on the internet; with or without a Google account.\n\n* `allAuthenticatedUsers`: A special identifier that represents anyone\n who is authenticated with a Google account or a service account.\n\n* `user:{emailid}`: An email address that represents a specific Google\n account. For example, `alice@gmail.com` or `joe@example.com`.\n\n\n* `serviceAccount:{emailid}`: An email address that represents a service\n account. For example, `my-other-app@appspot.gserviceaccount.com`.\n\n* `group:{emailid}`: An email address that represents a Google group.\n For example, `admins@example.com`.\n\n\n* `domain:{domain}`: A Google Apps domain name that represents all the\n users of that domain. For example, `google.com` or `example.com`.\n\n", - "items": { - "type": "string" - }, - "type": "array" - }, - "role": { - "description": "Role that is assigned to `members`.\nFor example, `roles/viewer`, `roles/editor`, or `roles/owner`.\nRequired", - "type": "string" - } - }, - "id": "Binding", - "description": "Associates `members` with a `role`.", - "type": "object" - }, - "Expr": { - "description": "Represents an expression text. Example:\n\n title: \"User account presence\"\n description: \"Determines whether the request has a user account\"\n expression: \"size(request.user) \u003e 0\"", - "type": "object", - "properties": { - "location": { - "description": "An optional string indicating the location of the expression for error\nreporting, e.g. a file name and a position in the file.", - "type": "string" - }, - "title": { - "description": "An optional title for the expression, i.e. a short string describing\nits purpose. This can be used e.g. in UIs which allow to enter the\nexpression.", - "type": "string" - }, - "description": { - "description": "An optional description of the expression. This is a longer text which\ndescribes the expression, e.g. when hovered over it in a UI.", - "type": "string" - }, - "expression": { - "description": "Textual representation of an expression in\nCommon Expression Language syntax.\n\nThe application context of the containing message determines which\nwell-known feature set of CEL is supported.", - "type": "string" - } - }, - "id": "Expr" - }, - "EncryptRequest": { - "description": "Request message for KeyManagementService.Encrypt.", - "type": "object", - "properties": { - "plaintext": { - "format": "byte", - "description": "Required. The data to encrypt. Must be no larger than 64KiB.", - "type": "string" - }, - "additionalAuthenticatedData": { - "format": "byte", - "description": "Optional data that, if specified, must also be provided during decryption\nthrough DecryptRequest.additional_authenticated_data. Must be no\nlarger than 64KiB.", - "type": "string" - } - }, - "id": "EncryptRequest" - }, - "ListCryptoKeyVersionsResponse": { - "description": "Response message for KeyManagementService.ListCryptoKeyVersions.", - "type": "object", - "properties": { - "cryptoKeyVersions": { - "description": "The list of CryptoKeyVersions.", - "items": { - "$ref": "CryptoKeyVersion" - }, - "type": "array" - }, - "nextPageToken": { - "description": "A token to retrieve next page of results. Pass this value in\nListCryptoKeyVersionsRequest.page_token to retrieve the next page of\nresults.", - "type": "string" - }, - "totalSize": { - "format": "int32", - "description": "The total number of CryptoKeyVersions that matched the\nquery.", - "type": "integer" - } - }, - "id": "ListCryptoKeyVersionsResponse" - }, - "Location": { - "description": "A resource that represents Google Cloud Platform location.", - "type": "object", - "properties": { - "locationId": { - "description": "The canonical id for this location. For example: `\"us-east1\"`.", - "type": "string" - }, - "metadata": { - "additionalProperties": { - "description": "Properties of the object. Contains field @type with type URL.", - "type": "any" - }, - "description": "Service-specific metadata. For example the available capacity at the given\nlocation.", - "type": "object" - }, - "labels": { - "additionalProperties": { - "type": "string" - }, - "description": "Cross-service attributes for the location. For example\n\n {\"cloud.googleapis.com/region\": \"us-east1\"}", - "type": "object" - }, - "name": { - "description": "Resource name for the location, which may vary between implementations.\nFor example: `\"projects/example-project/locations/us-east1\"`", - "type": "string" - } - }, - "id": "Location" - }, - "ListCryptoKeysResponse": { - "description": "Response message for KeyManagementService.ListCryptoKeys.", - "type": "object", - "properties": { - "nextPageToken": { - "description": "A token to retrieve next page of results. Pass this value in\nListCryptoKeysRequest.page_token to retrieve the next page of results.", - "type": "string" - }, - "totalSize": { - "format": "int32", - "description": "The total number of CryptoKeys that matched the query.", - "type": "integer" - }, - "cryptoKeys": { - "description": "The list of CryptoKeys.", - "items": { - "$ref": "CryptoKey" - }, - "type": "array" - } - }, - "id": "ListCryptoKeysResponse" - }, - "TestIamPermissionsResponse": { - "description": "Response message for `TestIamPermissions` method.", - "type": "object", - "properties": { - "permissions": { - "description": "A subset of `TestPermissionsRequest.permissions` that the caller is\nallowed.", - "items": { - "type": "string" - }, - "type": "array" - } - }, - "id": "TestIamPermissionsResponse" - }, - "DestroyCryptoKeyVersionRequest": { - "description": "Request message for KeyManagementService.DestroyCryptoKeyVersion.", - "type": "object", - "properties": {}, - "id": "DestroyCryptoKeyVersionRequest" - }, - "AuditLogConfig": { - "description": "Provides the configuration for logging a type of permissions.\nExample:\n\n {\n \"audit_log_configs\": [\n {\n \"log_type\": \"DATA_READ\",\n \"exempted_members\": [\n \"user:foo@gmail.com\"\n ]\n },\n {\n \"log_type\": \"DATA_WRITE\",\n }\n ]\n }\n\nThis enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting\nfoo@gmail.com from DATA_READ logging.", - "type": "object", - "properties": { - "exemptedMembers": { - "description": "Specifies the identities that do not cause logging for this type of\npermission.\nFollows the same format of Binding.members.", - "items": { - "type": "string" - }, - "type": "array" - }, - "logType": { - "enumDescriptions": [ - "Default case. Should never be this.", - "Admin reads. Example: CloudIAM getIamPolicy", - "Data writes. Example: CloudSQL Users create", - "Data reads. Example: CloudSQL Users list" - ], - "enum": [ - "LOG_TYPE_UNSPECIFIED", - "ADMIN_READ", - "DATA_WRITE", - "DATA_READ" - ], - "description": "The log type that this config enables.", - "type": "string" - } - }, - "id": "AuditLogConfig" - }, - "CryptoKey": { - "description": "A CryptoKey represents a logical key that can be used for cryptographic\noperations.\n\nA CryptoKey is made up of one or more versions, which\nrepresent the actual key material used in cryptographic operations.", - "type": "object", - "properties": { - "purpose": { - "enumDescriptions": [ - "Not specified.", - "CryptoKeys with this purpose may be used with\nEncrypt and\nDecrypt." - ], - "enum": [ - "CRYPTO_KEY_PURPOSE_UNSPECIFIED", - "ENCRYPT_DECRYPT" - ], - "description": "The immutable purpose of this CryptoKey. Currently, the only acceptable\npurpose is ENCRYPT_DECRYPT.", - "type": "string" - }, - "nextRotationTime": { - "format": "google-datetime", - "description": "At next_rotation_time, the Key Management Service will automatically:\n\n1. Create a new version of this CryptoKey.\n2. Mark the new version as primary.\n\nKey rotations performed manually via\nCreateCryptoKeyVersion and\nUpdateCryptoKeyPrimaryVersion\ndo not affect next_rotation_time.", - "type": "string" - }, - "labels": { - "additionalProperties": { - "type": "string" - }, - "description": "Labels with user defined metadata.", - "type": "object" - }, - "createTime": { - "format": "google-datetime", - "description": "Output only. The time at which this CryptoKey was created.", - "type": "string" - }, - "rotationPeriod": { - "format": "google-duration", - "description": "next_rotation_time will be advanced by this period when the service\nautomatically rotates a key. Must be at least one day.\n\nIf rotation_period is set, next_rotation_time must also be set.", - "type": "string" - }, - "primary": { - "description": "Output only. A copy of the \"primary\" CryptoKeyVersion that will be used\nby Encrypt when this CryptoKey is given\nin EncryptRequest.name.\n\nThe CryptoKey's primary version can be updated via\nUpdateCryptoKeyPrimaryVersion.", - "$ref": "CryptoKeyVersion" - }, - "name": { - "description": "Output only. The resource name for this CryptoKey in the format\n`projects/*/locations/*/keyRings/*/cryptoKeys/*`.", - "type": "string" - } - }, - "id": "CryptoKey" - }, - "DecryptResponse": { - "description": "Response message for KeyManagementService.Decrypt.", - "type": "object", - "properties": { - "plaintext": { - "format": "byte", - "description": "The decrypted data originally supplied in EncryptRequest.plaintext.", - "type": "string" - } - }, - "id": "DecryptResponse" - }, - "TestIamPermissionsRequest": { - "description": "Request message for `TestIamPermissions` method.", - "type": "object", - "properties": { - "permissions": { - "description": "The set of permissions to check for the `resource`. Permissions with\nwildcards (such as '*' or 'storage.*') are not allowed. For more\ninformation see\n[IAM Overview](https://cloud.google.com/iam/docs/overview#permissions).", - "items": { - "type": "string" - }, - "type": "array" - } - }, - "id": "TestIamPermissionsRequest" - }, - "EncryptResponse": { - "description": "Response message for KeyManagementService.Encrypt.", - "type": "object", - "properties": { - "name": { - "description": "The resource name of the CryptoKeyVersion used in encryption.", - "type": "string" - }, - "ciphertext": { - "format": "byte", - "description": "The encrypted data.", - "type": "string" - } - }, - "id": "EncryptResponse" - }, - "KeyRing": { - "description": "A KeyRing is a toplevel logical grouping of CryptoKeys.", - "type": "object", - "properties": { - "createTime": { - "format": "google-datetime", - "description": "Output only. The time at which this KeyRing was created.", - "type": "string" - }, - "name": { - "description": "Output only. The resource name for the KeyRing in the format\n`projects/*/locations/*/keyRings/*`.", - "type": "string" - } - }, - "id": "KeyRing" - }, - "ListLocationsResponse": { - "description": "The response message for Locations.ListLocations.", - "type": "object", - "properties": { - "nextPageToken": { - "description": "The standard List next-page token.", - "type": "string" - }, - "locations": { - "description": "A list of locations that matches the specified filter in the request.", - "items": { - "$ref": "Location" - }, - "type": "array" - } - }, - "id": "ListLocationsResponse" - }, - "Policy": { - "description": "Defines an Identity and Access Management (IAM) policy. It is used to\nspecify access control policies for Cloud Platform resources.\n\n\nA `Policy` consists of a list of `bindings`. A `Binding` binds a list of\n`members` to a `role`, where the members can be user accounts, Google groups,\nGoogle domains, and service accounts. A `role` is a named list of permissions\ndefined by IAM.\n\n**Example**\n\n {\n \"bindings\": [\n {\n \"role\": \"roles/owner\",\n \"members\": [\n \"user:mike@example.com\",\n \"group:admins@example.com\",\n \"domain:google.com\",\n \"serviceAccount:my-other-app@appspot.gserviceaccount.com\",\n ]\n },\n {\n \"role\": \"roles/viewer\",\n \"members\": [\"user:sean@example.com\"]\n }\n ]\n }\n\nFor a description of IAM and its features, see the\n[IAM developer's guide](https://cloud.google.com/iam).", - "type": "object", - "properties": { - "auditConfigs": { - "description": "Specifies cloud audit logging configuration for this policy.", - "items": { - "$ref": "AuditConfig" - }, - "type": "array" - }, - "bindings": { - "description": "Associates a list of `members` to a `role`.\n`bindings` with no members will result in an error.", - "items": { - "$ref": "Binding" - }, - "type": "array" - }, - "iamOwned": { - "type": "boolean" - }, - "etag": { - "format": "byte", - "description": "`etag` is used for optimistic concurrency control as a way to help\nprevent simultaneous updates of a policy from overwriting each other.\nIt is strongly suggested that systems make use of the `etag` in the\nread-modify-write cycle to perform policy updates in order to avoid race\nconditions: An `etag` is returned in the response to `getIamPolicy`, and\nsystems are expected to put that etag in the request to `setIamPolicy` to\nensure that their change will be applied to the same version of the policy.\n\nIf no `etag` is provided in the call to `setIamPolicy`, then the existing\npolicy is overwritten blindly.", - "type": "string" - }, - "version": { - "format": "int32", - "description": "Version of the `Policy`. The default version is 0.", - "type": "integer" - } - }, - "id": "Policy" - }, - "UpdateCryptoKeyPrimaryVersionRequest": { - "properties": { - "cryptoKeyVersionId": { - "description": "The id of the child CryptoKeyVersion to use as primary.", - "type": "string" - } - }, - "id": "UpdateCryptoKeyPrimaryVersionRequest", - "description": "Request message for KeyManagementService.UpdateCryptoKeyPrimaryVersion.", - "type": "object" - }, - "RestoreCryptoKeyVersionRequest": { - "description": "Request message for KeyManagementService.RestoreCryptoKeyVersion.", - "type": "object", - "properties": {}, - "id": "RestoreCryptoKeyVersionRequest" - }, - "ListKeyRingsResponse": { - "description": "Response message for KeyManagementService.ListKeyRings.", - "type": "object", - "properties": { - "nextPageToken": { - "description": "A token to retrieve next page of results. Pass this value in\nListKeyRingsRequest.page_token to retrieve the next page of results.", - "type": "string" - }, - "totalSize": { - "format": "int32", - "description": "The total number of KeyRings that matched the query.", - "type": "integer" - }, - "keyRings": { - "description": "The list of KeyRings.", - "items": { - "$ref": "KeyRing" - }, - "type": "array" - } - }, - "id": "ListKeyRingsResponse" - }, - "AuditConfig": { - "description": "Specifies the audit configuration for a service.\nThe configuration determines which permission types are logged, and what\nidentities, if any, are exempted from logging.\nAn AuditConfig must have one or more AuditLogConfigs.\n\nIf there are AuditConfigs for both `allServices` and a specific service,\nthe union of the two AuditConfigs is used for that service: the log_types\nspecified in each AuditConfig are enabled, and the exempted_members in each\nAuditConfig are exempted.\n\nExample Policy with multiple AuditConfigs:\n\n {\n \"audit_configs\": [\n {\n \"service\": \"allServices\"\n \"audit_log_configs\": [\n {\n \"log_type\": \"DATA_READ\",\n \"exempted_members\": [\n \"user:foo@gmail.com\"\n ]\n },\n {\n \"log_type\": \"DATA_WRITE\",\n },\n {\n \"log_type\": \"ADMIN_READ\",\n }\n ]\n },\n {\n \"service\": \"fooservice.googleapis.com\"\n \"audit_log_configs\": [\n {\n \"log_type\": \"DATA_READ\",\n },\n {\n \"log_type\": \"DATA_WRITE\",\n \"exempted_members\": [\n \"user:bar@gmail.com\"\n ]\n }\n ]\n }\n ]\n }\n\nFor fooservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ\nlogging. It also exempts foo@gmail.com from DATA_READ logging, and\nbar@gmail.com from DATA_WRITE logging.", - "type": "object", - "properties": { - "auditLogConfigs": { - "description": "The configuration for logging of each type of permission.\nNext ID: 4", - "items": { - "$ref": "AuditLogConfig" - }, - "type": "array" - }, - "exemptedMembers": { - "items": { - "type": "string" - }, - "type": "array" - }, - "service": { - "description": "Specifies a service that will be enabled for audit logging.\nFor example, `storage.googleapis.com`, `cloudsql.googleapis.com`.\n`allServices` is a special value that covers all services.", - "type": "string" - } - }, - "id": "AuditConfig" - } - }, - "icons": { - "x16": "http://www.google.com/images/icons/product/search-16.gif", - "x32": "http://www.google.com/images/icons/product/search-32.gif" - }, - "protocol": "rest", - "canonicalName": "Cloud KMS", - "auth": { - "oauth2": { - "scopes": { - "https://www.googleapis.com/auth/cloud-platform": { - "description": "View and manage your data across Google Cloud Platform services" - } - } - } - }, - "rootUrl": "https://cloudkms.googleapis.com/" -} diff --git a/vendor/google.golang.org/api/cloudkms/v1/cloudkms-gen.go b/vendor/google.golang.org/api/cloudkms/v1/cloudkms-gen.go deleted file mode 100644 index a044222a2e8..00000000000 --- a/vendor/google.golang.org/api/cloudkms/v1/cloudkms-gen.go +++ /dev/null @@ -1,4853 +0,0 @@ -// Package cloudkms provides access to the Google Cloud Key Management Service (KMS) API. -// -// See https://cloud.google.com/kms/ -// -// Usage example: -// -// import "google.golang.org/api/cloudkms/v1" -// ... -// cloudkmsService, err := cloudkms.New(oauthHttpClient) -package cloudkms - -import ( - "bytes" - "encoding/json" - "errors" - "fmt" - context "golang.org/x/net/context" - ctxhttp "golang.org/x/net/context/ctxhttp" - gensupport "google.golang.org/api/gensupport" - googleapi "google.golang.org/api/googleapi" - "io" - "net/http" - "net/url" - "strconv" - "strings" -) - -// Always reference these packages, just in case the auto-generated code -// below doesn't. -var _ = bytes.NewBuffer -var _ = strconv.Itoa -var _ = fmt.Sprintf -var _ = json.NewDecoder -var _ = io.Copy -var _ = url.Parse -var _ = gensupport.MarshalJSON -var _ = googleapi.Version -var _ = errors.New -var _ = strings.Replace -var _ = context.Canceled -var _ = ctxhttp.Do - -const apiId = "cloudkms:v1" -const apiName = "cloudkms" -const apiVersion = "v1" -const basePath = "https://cloudkms.googleapis.com/" - -// OAuth2 scopes used by this API. -const ( - // View and manage your data across Google Cloud Platform services - CloudPlatformScope = "https://www.googleapis.com/auth/cloud-platform" -) - -func New(client *http.Client) (*Service, error) { - if client == nil { - return nil, errors.New("client is nil") - } - s := &Service{client: client, BasePath: basePath} - s.Projects = NewProjectsService(s) - return s, nil -} - -type Service struct { - client *http.Client - BasePath string // API endpoint base URL - UserAgent string // optional additional User-Agent fragment - - Projects *ProjectsService -} - -func (s *Service) userAgent() string { - if s.UserAgent == "" { - return googleapi.UserAgent - } - return googleapi.UserAgent + " " + s.UserAgent -} - -func NewProjectsService(s *Service) *ProjectsService { - rs := &ProjectsService{s: s} - rs.Locations = NewProjectsLocationsService(s) - return rs -} - -type ProjectsService struct { - s *Service - - Locations *ProjectsLocationsService -} - -func NewProjectsLocationsService(s *Service) *ProjectsLocationsService { - rs := &ProjectsLocationsService{s: s} - rs.KeyRings = NewProjectsLocationsKeyRingsService(s) - return rs -} - -type ProjectsLocationsService struct { - s *Service - - KeyRings *ProjectsLocationsKeyRingsService -} - -func NewProjectsLocationsKeyRingsService(s *Service) *ProjectsLocationsKeyRingsService { - rs := &ProjectsLocationsKeyRingsService{s: s} - rs.CryptoKeys = NewProjectsLocationsKeyRingsCryptoKeysService(s) - return rs -} - -type ProjectsLocationsKeyRingsService struct { - s *Service - - CryptoKeys *ProjectsLocationsKeyRingsCryptoKeysService -} - -func NewProjectsLocationsKeyRingsCryptoKeysService(s *Service) *ProjectsLocationsKeyRingsCryptoKeysService { - rs := &ProjectsLocationsKeyRingsCryptoKeysService{s: s} - rs.CryptoKeyVersions = NewProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsService(s) - return rs -} - -type ProjectsLocationsKeyRingsCryptoKeysService struct { - s *Service - - CryptoKeyVersions *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsService -} - -func NewProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsService(s *Service) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsService { - rs := &ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsService{s: s} - return rs -} - -type ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsService struct { - s *Service -} - -// AuditConfig: Specifies the audit configuration for a service. -// The configuration determines which permission types are logged, and -// what -// identities, if any, are exempted from logging. -// An AuditConfig must have one or more AuditLogConfigs. -// -// If there are AuditConfigs for both `allServices` and a specific -// service, -// the union of the two AuditConfigs is used for that service: the -// log_types -// specified in each AuditConfig are enabled, and the exempted_members -// in each -// AuditConfig are exempted. -// -// Example Policy with multiple AuditConfigs: -// -// { -// "audit_configs": [ -// { -// "service": "allServices" -// "audit_log_configs": [ -// { -// "log_type": "DATA_READ", -// "exempted_members": [ -// "user:foo@gmail.com" -// ] -// }, -// { -// "log_type": "DATA_WRITE", -// }, -// { -// "log_type": "ADMIN_READ", -// } -// ] -// }, -// { -// "service": "fooservice.googleapis.com" -// "audit_log_configs": [ -// { -// "log_type": "DATA_READ", -// }, -// { -// "log_type": "DATA_WRITE", -// "exempted_members": [ -// "user:bar@gmail.com" -// ] -// } -// ] -// } -// ] -// } -// -// For fooservice, this policy enables DATA_READ, DATA_WRITE and -// ADMIN_READ -// logging. It also exempts foo@gmail.com from DATA_READ logging, -// and -// bar@gmail.com from DATA_WRITE logging. -type AuditConfig struct { - // AuditLogConfigs: The configuration for logging of each type of - // permission. - // Next ID: 4 - AuditLogConfigs []*AuditLogConfig `json:"auditLogConfigs,omitempty"` - - ExemptedMembers []string `json:"exemptedMembers,omitempty"` - - // Service: Specifies a service that will be enabled for audit - // logging. - // For example, `storage.googleapis.com`, - // `cloudsql.googleapis.com`. - // `allServices` is a special value that covers all services. - Service string `json:"service,omitempty"` - - // ForceSendFields is a list of field names (e.g. "AuditLogConfigs") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "AuditLogConfigs") to - // include in API requests with the JSON null value. By default, fields - // with empty values are omitted from API requests. However, any field - // with an empty value appearing in NullFields will be sent to the - // server as null. It is an error if a field in this list has a - // non-empty value. This may be used to include null fields in Patch - // requests. - NullFields []string `json:"-"` -} - -func (s *AuditConfig) MarshalJSON() ([]byte, error) { - type noMethod AuditConfig - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// AuditLogConfig: Provides the configuration for logging a type of -// permissions. -// Example: -// -// { -// "audit_log_configs": [ -// { -// "log_type": "DATA_READ", -// "exempted_members": [ -// "user:foo@gmail.com" -// ] -// }, -// { -// "log_type": "DATA_WRITE", -// } -// ] -// } -// -// This enables 'DATA_READ' and 'DATA_WRITE' logging, while -// exempting -// foo@gmail.com from DATA_READ logging. -type AuditLogConfig struct { - // ExemptedMembers: Specifies the identities that do not cause logging - // for this type of - // permission. - // Follows the same format of Binding.members. - ExemptedMembers []string `json:"exemptedMembers,omitempty"` - - // LogType: The log type that this config enables. - // - // Possible values: - // "LOG_TYPE_UNSPECIFIED" - Default case. Should never be this. - // "ADMIN_READ" - Admin reads. Example: CloudIAM getIamPolicy - // "DATA_WRITE" - Data writes. Example: CloudSQL Users create - // "DATA_READ" - Data reads. Example: CloudSQL Users list - LogType string `json:"logType,omitempty"` - - // ForceSendFields is a list of field names (e.g. "ExemptedMembers") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "ExemptedMembers") to - // include in API requests with the JSON null value. By default, fields - // with empty values are omitted from API requests. However, any field - // with an empty value appearing in NullFields will be sent to the - // server as null. It is an error if a field in this list has a - // non-empty value. This may be used to include null fields in Patch - // requests. - NullFields []string `json:"-"` -} - -func (s *AuditLogConfig) MarshalJSON() ([]byte, error) { - type noMethod AuditLogConfig - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// Binding: Associates `members` with a `role`. -type Binding struct { - // Condition: The condition that is associated with this binding. - // NOTE: an unsatisfied condition will not allow user access via - // current - // binding. Different bindings, including their conditions, are - // examined - // independently. - // This field is GOOGLE_INTERNAL. - Condition *Expr `json:"condition,omitempty"` - - // Members: Specifies the identities requesting access for a Cloud - // Platform resource. - // `members` can have the following values: - // - // * `allUsers`: A special identifier that represents anyone who is - // on the internet; with or without a Google account. - // - // * `allAuthenticatedUsers`: A special identifier that represents - // anyone - // who is authenticated with a Google account or a service - // account. - // - // * `user:{emailid}`: An email address that represents a specific - // Google - // account. For example, `alice@gmail.com` or `joe@example.com`. - // - // - // * `serviceAccount:{emailid}`: An email address that represents a - // service - // account. For example, - // `my-other-app@appspot.gserviceaccount.com`. - // - // * `group:{emailid}`: An email address that represents a Google - // group. - // For example, `admins@example.com`. - // - // - // * `domain:{domain}`: A Google Apps domain name that represents all - // the - // users of that domain. For example, `google.com` or - // `example.com`. - // - // - Members []string `json:"members,omitempty"` - - // Role: Role that is assigned to `members`. - // For example, `roles/viewer`, `roles/editor`, or - // `roles/owner`. - // Required - Role string `json:"role,omitempty"` - - // ForceSendFields is a list of field names (e.g. "Condition") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "Condition") to include in - // API requests with the JSON null value. By default, fields with empty - // values are omitted from API requests. However, any field with an - // empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *Binding) MarshalJSON() ([]byte, error) { - type noMethod Binding - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// CryptoKey: A CryptoKey represents a logical key that can be used for -// cryptographic -// operations. -// -// A CryptoKey is made up of one or more versions, which -// represent the actual key material used in cryptographic operations. -type CryptoKey struct { - // CreateTime: Output only. The time at which this CryptoKey was - // created. - CreateTime string `json:"createTime,omitempty"` - - // Labels: Labels with user defined metadata. - Labels map[string]string `json:"labels,omitempty"` - - // Name: Output only. The resource name for this CryptoKey in the - // format - // `projects/*/locations/*/keyRings/*/cryptoKeys/*`. - Name string `json:"name,omitempty"` - - // NextRotationTime: At next_rotation_time, the Key Management Service - // will automatically: - // - // 1. Create a new version of this CryptoKey. - // 2. Mark the new version as primary. - // - // Key rotations performed manually via - // CreateCryptoKeyVersion and - // UpdateCryptoKeyPrimaryVersion - // do not affect next_rotation_time. - NextRotationTime string `json:"nextRotationTime,omitempty"` - - // Primary: Output only. A copy of the "primary" CryptoKeyVersion that - // will be used - // by Encrypt when this CryptoKey is given - // in EncryptRequest.name. - // - // The CryptoKey's primary version can be updated - // via - // UpdateCryptoKeyPrimaryVersion. - Primary *CryptoKeyVersion `json:"primary,omitempty"` - - // Purpose: The immutable purpose of this CryptoKey. Currently, the only - // acceptable - // purpose is ENCRYPT_DECRYPT. - // - // Possible values: - // "CRYPTO_KEY_PURPOSE_UNSPECIFIED" - Not specified. - // "ENCRYPT_DECRYPT" - CryptoKeys with this purpose may be used - // with - // Encrypt and - // Decrypt. - Purpose string `json:"purpose,omitempty"` - - // RotationPeriod: next_rotation_time will be advanced by this period - // when the service - // automatically rotates a key. Must be at least one day. - // - // If rotation_period is set, next_rotation_time must also be set. - RotationPeriod string `json:"rotationPeriod,omitempty"` - - // ServerResponse contains the HTTP response code and headers from the - // server. - googleapi.ServerResponse `json:"-"` - - // ForceSendFields is a list of field names (e.g. "CreateTime") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "CreateTime") to include in - // API requests with the JSON null value. By default, fields with empty - // values are omitted from API requests. However, any field with an - // empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *CryptoKey) MarshalJSON() ([]byte, error) { - type noMethod CryptoKey - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// CryptoKeyVersion: A CryptoKeyVersion represents an individual -// cryptographic key, and the -// associated key material. -// -// It can be used for cryptographic operations either directly, or via -// its -// parent CryptoKey, in which case the server will choose the -// appropriate -// version for the operation. -// -// For security reasons, the raw cryptographic key material represented -// by a -// CryptoKeyVersion can never be viewed or exported. It can only be used -// to -// encrypt or decrypt data when an authorized user or application -// invokes Cloud -// KMS. -type CryptoKeyVersion struct { - // CreateTime: Output only. The time at which this CryptoKeyVersion was - // created. - CreateTime string `json:"createTime,omitempty"` - - // DestroyEventTime: Output only. The time this CryptoKeyVersion's key - // material was - // destroyed. Only present if state is - // DESTROYED. - DestroyEventTime string `json:"destroyEventTime,omitempty"` - - // DestroyTime: Output only. The time this CryptoKeyVersion's key - // material is scheduled - // for destruction. Only present if state is - // DESTROY_SCHEDULED. - DestroyTime string `json:"destroyTime,omitempty"` - - // Name: Output only. The resource name for this CryptoKeyVersion in the - // format - // `projects/*/locations/*/keyRings/*/cryptoKeys/*/cryptoKeyVersio - // ns/*`. - Name string `json:"name,omitempty"` - - // State: The current state of the CryptoKeyVersion. - // - // Possible values: - // "CRYPTO_KEY_VERSION_STATE_UNSPECIFIED" - Not specified. - // "ENABLED" - This version may be used in Encrypt and - // Decrypt requests. - // "DISABLED" - This version may not be used, but the key material is - // still available, - // and the version can be placed back into the ENABLED state. - // "DESTROYED" - This version is destroyed, and the key material is no - // longer stored. - // A version may not leave this state once entered. - // "DESTROY_SCHEDULED" - This version is scheduled for destruction, - // and will be destroyed soon. - // Call - // RestoreCryptoKeyVersion - // to put it back into the DISABLED state. - State string `json:"state,omitempty"` - - // ServerResponse contains the HTTP response code and headers from the - // server. - googleapi.ServerResponse `json:"-"` - - // ForceSendFields is a list of field names (e.g. "CreateTime") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "CreateTime") to include in - // API requests with the JSON null value. By default, fields with empty - // values are omitted from API requests. However, any field with an - // empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *CryptoKeyVersion) MarshalJSON() ([]byte, error) { - type noMethod CryptoKeyVersion - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// DecryptRequest: Request message for KeyManagementService.Decrypt. -type DecryptRequest struct { - // AdditionalAuthenticatedData: Optional data that must match the data - // originally supplied in - // EncryptRequest.additional_authenticated_data. - AdditionalAuthenticatedData string `json:"additionalAuthenticatedData,omitempty"` - - // Ciphertext: Required. The encrypted data originally returned - // in - // EncryptResponse.ciphertext. - Ciphertext string `json:"ciphertext,omitempty"` - - // ForceSendFields is a list of field names (e.g. - // "AdditionalAuthenticatedData") to unconditionally include in API - // requests. By default, fields with empty values are omitted from API - // requests. However, any non-pointer, non-interface field appearing in - // ForceSendFields will be sent to the server regardless of whether the - // field is empty or not. This may be used to include empty fields in - // Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. - // "AdditionalAuthenticatedData") to include in API requests with the - // JSON null value. By default, fields with empty values are omitted - // from API requests. However, any field with an empty value appearing - // in NullFields will be sent to the server as null. It is an error if a - // field in this list has a non-empty value. This may be used to include - // null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *DecryptRequest) MarshalJSON() ([]byte, error) { - type noMethod DecryptRequest - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// DecryptResponse: Response message for KeyManagementService.Decrypt. -type DecryptResponse struct { - // Plaintext: The decrypted data originally supplied in - // EncryptRequest.plaintext. - Plaintext string `json:"plaintext,omitempty"` - - // ServerResponse contains the HTTP response code and headers from the - // server. - googleapi.ServerResponse `json:"-"` - - // ForceSendFields is a list of field names (e.g. "Plaintext") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "Plaintext") to include in - // API requests with the JSON null value. By default, fields with empty - // values are omitted from API requests. However, any field with an - // empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *DecryptResponse) MarshalJSON() ([]byte, error) { - type noMethod DecryptResponse - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// DestroyCryptoKeyVersionRequest: Request message for -// KeyManagementService.DestroyCryptoKeyVersion. -type DestroyCryptoKeyVersionRequest struct { -} - -// EncryptRequest: Request message for KeyManagementService.Encrypt. -type EncryptRequest struct { - // AdditionalAuthenticatedData: Optional data that, if specified, must - // also be provided during decryption - // through DecryptRequest.additional_authenticated_data. Must be - // no - // larger than 64KiB. - AdditionalAuthenticatedData string `json:"additionalAuthenticatedData,omitempty"` - - // Plaintext: Required. The data to encrypt. Must be no larger than - // 64KiB. - Plaintext string `json:"plaintext,omitempty"` - - // ForceSendFields is a list of field names (e.g. - // "AdditionalAuthenticatedData") to unconditionally include in API - // requests. By default, fields with empty values are omitted from API - // requests. However, any non-pointer, non-interface field appearing in - // ForceSendFields will be sent to the server regardless of whether the - // field is empty or not. This may be used to include empty fields in - // Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. - // "AdditionalAuthenticatedData") to include in API requests with the - // JSON null value. By default, fields with empty values are omitted - // from API requests. However, any field with an empty value appearing - // in NullFields will be sent to the server as null. It is an error if a - // field in this list has a non-empty value. This may be used to include - // null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *EncryptRequest) MarshalJSON() ([]byte, error) { - type noMethod EncryptRequest - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// EncryptResponse: Response message for KeyManagementService.Encrypt. -type EncryptResponse struct { - // Ciphertext: The encrypted data. - Ciphertext string `json:"ciphertext,omitempty"` - - // Name: The resource name of the CryptoKeyVersion used in encryption. - Name string `json:"name,omitempty"` - - // ServerResponse contains the HTTP response code and headers from the - // server. - googleapi.ServerResponse `json:"-"` - - // ForceSendFields is a list of field names (e.g. "Ciphertext") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "Ciphertext") to include in - // API requests with the JSON null value. By default, fields with empty - // values are omitted from API requests. However, any field with an - // empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *EncryptResponse) MarshalJSON() ([]byte, error) { - type noMethod EncryptResponse - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// Expr: Represents an expression text. Example: -// -// title: "User account presence" -// description: "Determines whether the request has a user account" -// expression: "size(request.user) > 0" -type Expr struct { - // Description: An optional description of the expression. This is a - // longer text which - // describes the expression, e.g. when hovered over it in a UI. - Description string `json:"description,omitempty"` - - // Expression: Textual representation of an expression in - // Common Expression Language syntax. - // - // The application context of the containing message determines - // which - // well-known feature set of CEL is supported. - Expression string `json:"expression,omitempty"` - - // Location: An optional string indicating the location of the - // expression for error - // reporting, e.g. a file name and a position in the file. - Location string `json:"location,omitempty"` - - // Title: An optional title for the expression, i.e. a short string - // describing - // its purpose. This can be used e.g. in UIs which allow to enter - // the - // expression. - Title string `json:"title,omitempty"` - - // ForceSendFields is a list of field names (e.g. "Description") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "Description") to include - // in API requests with the JSON null value. By default, fields with - // empty values are omitted from API requests. However, any field with - // an empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *Expr) MarshalJSON() ([]byte, error) { - type noMethod Expr - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// KeyRing: A KeyRing is a toplevel logical grouping of CryptoKeys. -type KeyRing struct { - // CreateTime: Output only. The time at which this KeyRing was created. - CreateTime string `json:"createTime,omitempty"` - - // Name: Output only. The resource name for the KeyRing in the - // format - // `projects/*/locations/*/keyRings/*`. - Name string `json:"name,omitempty"` - - // ServerResponse contains the HTTP response code and headers from the - // server. - googleapi.ServerResponse `json:"-"` - - // ForceSendFields is a list of field names (e.g. "CreateTime") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "CreateTime") to include in - // API requests with the JSON null value. By default, fields with empty - // values are omitted from API requests. However, any field with an - // empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *KeyRing) MarshalJSON() ([]byte, error) { - type noMethod KeyRing - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// ListCryptoKeyVersionsResponse: Response message for -// KeyManagementService.ListCryptoKeyVersions. -type ListCryptoKeyVersionsResponse struct { - // CryptoKeyVersions: The list of CryptoKeyVersions. - CryptoKeyVersions []*CryptoKeyVersion `json:"cryptoKeyVersions,omitempty"` - - // NextPageToken: A token to retrieve next page of results. Pass this - // value in - // ListCryptoKeyVersionsRequest.page_token to retrieve the next page - // of - // results. - NextPageToken string `json:"nextPageToken,omitempty"` - - // TotalSize: The total number of CryptoKeyVersions that matched - // the - // query. - TotalSize int64 `json:"totalSize,omitempty"` - - // ServerResponse contains the HTTP response code and headers from the - // server. - googleapi.ServerResponse `json:"-"` - - // ForceSendFields is a list of field names (e.g. "CryptoKeyVersions") - // to unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "CryptoKeyVersions") to - // include in API requests with the JSON null value. By default, fields - // with empty values are omitted from API requests. However, any field - // with an empty value appearing in NullFields will be sent to the - // server as null. It is an error if a field in this list has a - // non-empty value. This may be used to include null fields in Patch - // requests. - NullFields []string `json:"-"` -} - -func (s *ListCryptoKeyVersionsResponse) MarshalJSON() ([]byte, error) { - type noMethod ListCryptoKeyVersionsResponse - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// ListCryptoKeysResponse: Response message for -// KeyManagementService.ListCryptoKeys. -type ListCryptoKeysResponse struct { - // CryptoKeys: The list of CryptoKeys. - CryptoKeys []*CryptoKey `json:"cryptoKeys,omitempty"` - - // NextPageToken: A token to retrieve next page of results. Pass this - // value in - // ListCryptoKeysRequest.page_token to retrieve the next page of - // results. - NextPageToken string `json:"nextPageToken,omitempty"` - - // TotalSize: The total number of CryptoKeys that matched the query. - TotalSize int64 `json:"totalSize,omitempty"` - - // ServerResponse contains the HTTP response code and headers from the - // server. - googleapi.ServerResponse `json:"-"` - - // ForceSendFields is a list of field names (e.g. "CryptoKeys") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "CryptoKeys") to include in - // API requests with the JSON null value. By default, fields with empty - // values are omitted from API requests. However, any field with an - // empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *ListCryptoKeysResponse) MarshalJSON() ([]byte, error) { - type noMethod ListCryptoKeysResponse - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// ListKeyRingsResponse: Response message for -// KeyManagementService.ListKeyRings. -type ListKeyRingsResponse struct { - // KeyRings: The list of KeyRings. - KeyRings []*KeyRing `json:"keyRings,omitempty"` - - // NextPageToken: A token to retrieve next page of results. Pass this - // value in - // ListKeyRingsRequest.page_token to retrieve the next page of results. - NextPageToken string `json:"nextPageToken,omitempty"` - - // TotalSize: The total number of KeyRings that matched the query. - TotalSize int64 `json:"totalSize,omitempty"` - - // ServerResponse contains the HTTP response code and headers from the - // server. - googleapi.ServerResponse `json:"-"` - - // ForceSendFields is a list of field names (e.g. "KeyRings") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "KeyRings") to include in - // API requests with the JSON null value. By default, fields with empty - // values are omitted from API requests. However, any field with an - // empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *ListKeyRingsResponse) MarshalJSON() ([]byte, error) { - type noMethod ListKeyRingsResponse - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// ListLocationsResponse: The response message for -// Locations.ListLocations. -type ListLocationsResponse struct { - // Locations: A list of locations that matches the specified filter in - // the request. - Locations []*Location `json:"locations,omitempty"` - - // NextPageToken: The standard List next-page token. - NextPageToken string `json:"nextPageToken,omitempty"` - - // ServerResponse contains the HTTP response code and headers from the - // server. - googleapi.ServerResponse `json:"-"` - - // ForceSendFields is a list of field names (e.g. "Locations") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "Locations") to include in - // API requests with the JSON null value. By default, fields with empty - // values are omitted from API requests. However, any field with an - // empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *ListLocationsResponse) MarshalJSON() ([]byte, error) { - type noMethod ListLocationsResponse - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// Location: A resource that represents Google Cloud Platform location. -type Location struct { - // Labels: Cross-service attributes for the location. For example - // - // {"cloud.googleapis.com/region": "us-east1"} - Labels map[string]string `json:"labels,omitempty"` - - // LocationId: The canonical id for this location. For example: - // "us-east1". - LocationId string `json:"locationId,omitempty"` - - // Metadata: Service-specific metadata. For example the available - // capacity at the given - // location. - Metadata googleapi.RawMessage `json:"metadata,omitempty"` - - // Name: Resource name for the location, which may vary between - // implementations. - // For example: "projects/example-project/locations/us-east1" - Name string `json:"name,omitempty"` - - // ServerResponse contains the HTTP response code and headers from the - // server. - googleapi.ServerResponse `json:"-"` - - // ForceSendFields is a list of field names (e.g. "Labels") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "Labels") to include in API - // requests with the JSON null value. By default, fields with empty - // values are omitted from API requests. However, any field with an - // empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *Location) MarshalJSON() ([]byte, error) { - type noMethod Location - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// Policy: Defines an Identity and Access Management (IAM) policy. It is -// used to -// specify access control policies for Cloud Platform resources. -// -// -// A `Policy` consists of a list of `bindings`. A `Binding` binds a list -// of -// `members` to a `role`, where the members can be user accounts, Google -// groups, -// Google domains, and service accounts. A `role` is a named list of -// permissions -// defined by IAM. -// -// **Example** -// -// { -// "bindings": [ -// { -// "role": "roles/owner", -// "members": [ -// "user:mike@example.com", -// "group:admins@example.com", -// "domain:google.com", -// -// "serviceAccount:my-other-app@appspot.gserviceaccount.com", -// ] -// }, -// { -// "role": "roles/viewer", -// "members": ["user:sean@example.com"] -// } -// ] -// } -// -// For a description of IAM and its features, see the -// [IAM developer's guide](https://cloud.google.com/iam). -type Policy struct { - // AuditConfigs: Specifies cloud audit logging configuration for this - // policy. - AuditConfigs []*AuditConfig `json:"auditConfigs,omitempty"` - - // Bindings: Associates a list of `members` to a `role`. - // `bindings` with no members will result in an error. - Bindings []*Binding `json:"bindings,omitempty"` - - // Etag: `etag` is used for optimistic concurrency control as a way to - // help - // prevent simultaneous updates of a policy from overwriting each - // other. - // It is strongly suggested that systems make use of the `etag` in - // the - // read-modify-write cycle to perform policy updates in order to avoid - // race - // conditions: An `etag` is returned in the response to `getIamPolicy`, - // and - // systems are expected to put that etag in the request to - // `setIamPolicy` to - // ensure that their change will be applied to the same version of the - // policy. - // - // If no `etag` is provided in the call to `setIamPolicy`, then the - // existing - // policy is overwritten blindly. - Etag string `json:"etag,omitempty"` - - IamOwned bool `json:"iamOwned,omitempty"` - - // Version: Version of the `Policy`. The default version is 0. - Version int64 `json:"version,omitempty"` - - // ServerResponse contains the HTTP response code and headers from the - // server. - googleapi.ServerResponse `json:"-"` - - // ForceSendFields is a list of field names (e.g. "AuditConfigs") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "AuditConfigs") to include - // in API requests with the JSON null value. By default, fields with - // empty values are omitted from API requests. However, any field with - // an empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *Policy) MarshalJSON() ([]byte, error) { - type noMethod Policy - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// RestoreCryptoKeyVersionRequest: Request message for -// KeyManagementService.RestoreCryptoKeyVersion. -type RestoreCryptoKeyVersionRequest struct { -} - -// SetIamPolicyRequest: Request message for `SetIamPolicy` method. -type SetIamPolicyRequest struct { - // Policy: REQUIRED: The complete policy to be applied to the - // `resource`. The size of - // the policy is limited to a few 10s of KB. An empty policy is a - // valid policy but certain Cloud Platform services (such as - // Projects) - // might reject them. - Policy *Policy `json:"policy,omitempty"` - - // UpdateMask: OPTIONAL: A FieldMask specifying which fields of the - // policy to modify. Only - // the fields in the mask will be modified. If no mask is provided, - // the - // following default mask is used: - // paths: "bindings, etag" - // This field is only used by Cloud IAM. - UpdateMask string `json:"updateMask,omitempty"` - - // ForceSendFields is a list of field names (e.g. "Policy") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "Policy") to include in API - // requests with the JSON null value. By default, fields with empty - // values are omitted from API requests. However, any field with an - // empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *SetIamPolicyRequest) MarshalJSON() ([]byte, error) { - type noMethod SetIamPolicyRequest - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// TestIamPermissionsRequest: Request message for `TestIamPermissions` -// method. -type TestIamPermissionsRequest struct { - // Permissions: The set of permissions to check for the `resource`. - // Permissions with - // wildcards (such as '*' or 'storage.*') are not allowed. For - // more - // information see - // [IAM - // Overview](https://cloud.google.com/iam/docs/overview#permissions). - Permissions []string `json:"permissions,omitempty"` - - // ForceSendFields is a list of field names (e.g. "Permissions") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "Permissions") to include - // in API requests with the JSON null value. By default, fields with - // empty values are omitted from API requests. However, any field with - // an empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *TestIamPermissionsRequest) MarshalJSON() ([]byte, error) { - type noMethod TestIamPermissionsRequest - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// TestIamPermissionsResponse: Response message for `TestIamPermissions` -// method. -type TestIamPermissionsResponse struct { - // Permissions: A subset of `TestPermissionsRequest.permissions` that - // the caller is - // allowed. - Permissions []string `json:"permissions,omitempty"` - - // ServerResponse contains the HTTP response code and headers from the - // server. - googleapi.ServerResponse `json:"-"` - - // ForceSendFields is a list of field names (e.g. "Permissions") to - // unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "Permissions") to include - // in API requests with the JSON null value. By default, fields with - // empty values are omitted from API requests. However, any field with - // an empty value appearing in NullFields will be sent to the server as - // null. It is an error if a field in this list has a non-empty value. - // This may be used to include null fields in Patch requests. - NullFields []string `json:"-"` -} - -func (s *TestIamPermissionsResponse) MarshalJSON() ([]byte, error) { - type noMethod TestIamPermissionsResponse - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// UpdateCryptoKeyPrimaryVersionRequest: Request message for -// KeyManagementService.UpdateCryptoKeyPrimaryVersion. -type UpdateCryptoKeyPrimaryVersionRequest struct { - // CryptoKeyVersionId: The id of the child CryptoKeyVersion to use as - // primary. - CryptoKeyVersionId string `json:"cryptoKeyVersionId,omitempty"` - - // ForceSendFields is a list of field names (e.g. "CryptoKeyVersionId") - // to unconditionally include in API requests. By default, fields with - // empty values are omitted from API requests. However, any non-pointer, - // non-interface field appearing in ForceSendFields will be sent to the - // server regardless of whether the field is empty or not. This may be - // used to include empty fields in Patch requests. - ForceSendFields []string `json:"-"` - - // NullFields is a list of field names (e.g. "CryptoKeyVersionId") to - // include in API requests with the JSON null value. By default, fields - // with empty values are omitted from API requests. However, any field - // with an empty value appearing in NullFields will be sent to the - // server as null. It is an error if a field in this list has a - // non-empty value. This may be used to include null fields in Patch - // requests. - NullFields []string `json:"-"` -} - -func (s *UpdateCryptoKeyPrimaryVersionRequest) MarshalJSON() ([]byte, error) { - type noMethod UpdateCryptoKeyPrimaryVersionRequest - raw := noMethod(*s) - return gensupport.MarshalJSON(raw, s.ForceSendFields, s.NullFields) -} - -// method id "cloudkms.projects.locations.get": - -type ProjectsLocationsGetCall struct { - s *Service - name string - urlParams_ gensupport.URLParams - ifNoneMatch_ string - ctx_ context.Context - header_ http.Header -} - -// Get: Get information about a location. -func (r *ProjectsLocationsService) Get(name string) *ProjectsLocationsGetCall { - c := &ProjectsLocationsGetCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.name = name - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsGetCall) Fields(s ...googleapi.Field) *ProjectsLocationsGetCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// IfNoneMatch sets the optional parameter which makes the operation -// fail if the object's ETag matches the given value. This is useful for -// getting updates only after the object has changed since the last -// request. Use googleapi.IsNotModified to check whether the response -// error from Do is the result of In-None-Match. -func (c *ProjectsLocationsGetCall) IfNoneMatch(entityTag string) *ProjectsLocationsGetCall { - c.ifNoneMatch_ = entityTag - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsGetCall) Context(ctx context.Context) *ProjectsLocationsGetCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsGetCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsGetCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - if c.ifNoneMatch_ != "" { - reqHeaders.Set("If-None-Match", c.ifNoneMatch_) - } - var body io.Reader = nil - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+name}") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("GET", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "name": c.name, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.get" call. -// Exactly one of *Location or error will be non-nil. Any non-2xx status -// code is an error. Response headers are in either -// *Location.ServerResponse.Header or (if a response was returned at -// all) in error.(*googleapi.Error).Header. Use googleapi.IsNotModified -// to check whether the returned error was because -// http.StatusNotModified was returned. -func (c *ProjectsLocationsGetCall) Do(opts ...googleapi.CallOption) (*Location, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &Location{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Get information about a location.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}", - // "httpMethod": "GET", - // "id": "cloudkms.projects.locations.get", - // "parameterOrder": [ - // "name" - // ], - // "parameters": { - // "name": { - // "description": "Resource name for the location.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+name}", - // "response": { - // "$ref": "Location" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.list": - -type ProjectsLocationsListCall struct { - s *Service - name string - urlParams_ gensupport.URLParams - ifNoneMatch_ string - ctx_ context.Context - header_ http.Header -} - -// List: Lists information about the supported locations for this -// service. -func (r *ProjectsLocationsService) List(name string) *ProjectsLocationsListCall { - c := &ProjectsLocationsListCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.name = name - return c -} - -// Filter sets the optional parameter "filter": The standard list -// filter. -func (c *ProjectsLocationsListCall) Filter(filter string) *ProjectsLocationsListCall { - c.urlParams_.Set("filter", filter) - return c -} - -// PageSize sets the optional parameter "pageSize": The standard list -// page size. -func (c *ProjectsLocationsListCall) PageSize(pageSize int64) *ProjectsLocationsListCall { - c.urlParams_.Set("pageSize", fmt.Sprint(pageSize)) - return c -} - -// PageToken sets the optional parameter "pageToken": The standard list -// page token. -func (c *ProjectsLocationsListCall) PageToken(pageToken string) *ProjectsLocationsListCall { - c.urlParams_.Set("pageToken", pageToken) - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsListCall) Fields(s ...googleapi.Field) *ProjectsLocationsListCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// IfNoneMatch sets the optional parameter which makes the operation -// fail if the object's ETag matches the given value. This is useful for -// getting updates only after the object has changed since the last -// request. Use googleapi.IsNotModified to check whether the response -// error from Do is the result of In-None-Match. -func (c *ProjectsLocationsListCall) IfNoneMatch(entityTag string) *ProjectsLocationsListCall { - c.ifNoneMatch_ = entityTag - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsListCall) Context(ctx context.Context) *ProjectsLocationsListCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsListCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsListCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - if c.ifNoneMatch_ != "" { - reqHeaders.Set("If-None-Match", c.ifNoneMatch_) - } - var body io.Reader = nil - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+name}/locations") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("GET", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "name": c.name, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.list" call. -// Exactly one of *ListLocationsResponse or error will be non-nil. Any -// non-2xx status code is an error. Response headers are in either -// *ListLocationsResponse.ServerResponse.Header or (if a response was -// returned at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsListCall) Do(opts ...googleapi.CallOption) (*ListLocationsResponse, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &ListLocationsResponse{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Lists information about the supported locations for this service.", - // "flatPath": "v1/projects/{projectsId}/locations", - // "httpMethod": "GET", - // "id": "cloudkms.projects.locations.list", - // "parameterOrder": [ - // "name" - // ], - // "parameters": { - // "filter": { - // "description": "The standard list filter.", - // "location": "query", - // "type": "string" - // }, - // "name": { - // "description": "The resource that owns the locations collection, if applicable.", - // "location": "path", - // "pattern": "^projects/[^/]+$", - // "required": true, - // "type": "string" - // }, - // "pageSize": { - // "description": "The standard list page size.", - // "format": "int32", - // "location": "query", - // "type": "integer" - // }, - // "pageToken": { - // "description": "The standard list page token.", - // "location": "query", - // "type": "string" - // } - // }, - // "path": "v1/{+name}/locations", - // "response": { - // "$ref": "ListLocationsResponse" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// Pages invokes f for each page of results. -// A non-nil error returned from f will halt the iteration. -// The provided context supersedes any context provided to the Context method. -func (c *ProjectsLocationsListCall) Pages(ctx context.Context, f func(*ListLocationsResponse) error) error { - c.ctx_ = ctx - defer c.PageToken(c.urlParams_.Get("pageToken")) // reset paging to original point - for { - x, err := c.Do() - if err != nil { - return err - } - if err := f(x); err != nil { - return err - } - if x.NextPageToken == "" { - return nil - } - c.PageToken(x.NextPageToken) - } -} - -// method id "cloudkms.projects.locations.keyRings.create": - -type ProjectsLocationsKeyRingsCreateCall struct { - s *Service - parent string - keyring *KeyRing - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// Create: Create a new KeyRing in a given Project and Location. -func (r *ProjectsLocationsKeyRingsService) Create(parent string, keyring *KeyRing) *ProjectsLocationsKeyRingsCreateCall { - c := &ProjectsLocationsKeyRingsCreateCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.parent = parent - c.keyring = keyring - return c -} - -// KeyRingId sets the optional parameter "keyRingId": Required. It must -// be unique within a location and match the regular -// expression `[a-zA-Z0-9_-]{1,63}` -func (c *ProjectsLocationsKeyRingsCreateCall) KeyRingId(keyRingId string) *ProjectsLocationsKeyRingsCreateCall { - c.urlParams_.Set("keyRingId", keyRingId) - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCreateCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCreateCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCreateCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCreateCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCreateCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCreateCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.keyring) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+parent}/keyRings") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("POST", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "parent": c.parent, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.create" call. -// Exactly one of *KeyRing or error will be non-nil. Any non-2xx status -// code is an error. Response headers are in either -// *KeyRing.ServerResponse.Header or (if a response was returned at all) -// in error.(*googleapi.Error).Header. Use googleapi.IsNotModified to -// check whether the returned error was because http.StatusNotModified -// was returned. -func (c *ProjectsLocationsKeyRingsCreateCall) Do(opts ...googleapi.CallOption) (*KeyRing, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &KeyRing{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Create a new KeyRing in a given Project and Location.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings", - // "httpMethod": "POST", - // "id": "cloudkms.projects.locations.keyRings.create", - // "parameterOrder": [ - // "parent" - // ], - // "parameters": { - // "keyRingId": { - // "description": "Required. It must be unique within a location and match the regular\nexpression `[a-zA-Z0-9_-]{1,63}`", - // "location": "query", - // "type": "string" - // }, - // "parent": { - // "description": "Required. The resource name of the location associated with the\nKeyRings, in the format `projects/*/locations/*`.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+parent}/keyRings", - // "request": { - // "$ref": "KeyRing" - // }, - // "response": { - // "$ref": "KeyRing" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.get": - -type ProjectsLocationsKeyRingsGetCall struct { - s *Service - name string - urlParams_ gensupport.URLParams - ifNoneMatch_ string - ctx_ context.Context - header_ http.Header -} - -// Get: Returns metadata for a given KeyRing. -func (r *ProjectsLocationsKeyRingsService) Get(name string) *ProjectsLocationsKeyRingsGetCall { - c := &ProjectsLocationsKeyRingsGetCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.name = name - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsGetCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsGetCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// IfNoneMatch sets the optional parameter which makes the operation -// fail if the object's ETag matches the given value. This is useful for -// getting updates only after the object has changed since the last -// request. Use googleapi.IsNotModified to check whether the response -// error from Do is the result of In-None-Match. -func (c *ProjectsLocationsKeyRingsGetCall) IfNoneMatch(entityTag string) *ProjectsLocationsKeyRingsGetCall { - c.ifNoneMatch_ = entityTag - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsGetCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsGetCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsGetCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsGetCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - if c.ifNoneMatch_ != "" { - reqHeaders.Set("If-None-Match", c.ifNoneMatch_) - } - var body io.Reader = nil - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+name}") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("GET", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "name": c.name, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.get" call. -// Exactly one of *KeyRing or error will be non-nil. Any non-2xx status -// code is an error. Response headers are in either -// *KeyRing.ServerResponse.Header or (if a response was returned at all) -// in error.(*googleapi.Error).Header. Use googleapi.IsNotModified to -// check whether the returned error was because http.StatusNotModified -// was returned. -func (c *ProjectsLocationsKeyRingsGetCall) Do(opts ...googleapi.CallOption) (*KeyRing, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &KeyRing{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Returns metadata for a given KeyRing.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}", - // "httpMethod": "GET", - // "id": "cloudkms.projects.locations.keyRings.get", - // "parameterOrder": [ - // "name" - // ], - // "parameters": { - // "name": { - // "description": "The name of the KeyRing to get.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+name}", - // "response": { - // "$ref": "KeyRing" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.getIamPolicy": - -type ProjectsLocationsKeyRingsGetIamPolicyCall struct { - s *Service - resource string - urlParams_ gensupport.URLParams - ifNoneMatch_ string - ctx_ context.Context - header_ http.Header -} - -// GetIamPolicy: Gets the access control policy for a resource. -// Returns an empty policy if the resource exists and does not have a -// policy -// set. -func (r *ProjectsLocationsKeyRingsService) GetIamPolicy(resource string) *ProjectsLocationsKeyRingsGetIamPolicyCall { - c := &ProjectsLocationsKeyRingsGetIamPolicyCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.resource = resource - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsGetIamPolicyCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsGetIamPolicyCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// IfNoneMatch sets the optional parameter which makes the operation -// fail if the object's ETag matches the given value. This is useful for -// getting updates only after the object has changed since the last -// request. Use googleapi.IsNotModified to check whether the response -// error from Do is the result of In-None-Match. -func (c *ProjectsLocationsKeyRingsGetIamPolicyCall) IfNoneMatch(entityTag string) *ProjectsLocationsKeyRingsGetIamPolicyCall { - c.ifNoneMatch_ = entityTag - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsGetIamPolicyCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsGetIamPolicyCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsGetIamPolicyCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsGetIamPolicyCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - if c.ifNoneMatch_ != "" { - reqHeaders.Set("If-None-Match", c.ifNoneMatch_) - } - var body io.Reader = nil - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+resource}:getIamPolicy") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("GET", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "resource": c.resource, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.getIamPolicy" call. -// Exactly one of *Policy or error will be non-nil. Any non-2xx status -// code is an error. Response headers are in either -// *Policy.ServerResponse.Header or (if a response was returned at all) -// in error.(*googleapi.Error).Header. Use googleapi.IsNotModified to -// check whether the returned error was because http.StatusNotModified -// was returned. -func (c *ProjectsLocationsKeyRingsGetIamPolicyCall) Do(opts ...googleapi.CallOption) (*Policy, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &Policy{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Gets the access control policy for a resource.\nReturns an empty policy if the resource exists and does not have a policy\nset.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}:getIamPolicy", - // "httpMethod": "GET", - // "id": "cloudkms.projects.locations.keyRings.getIamPolicy", - // "parameterOrder": [ - // "resource" - // ], - // "parameters": { - // "resource": { - // "description": "REQUIRED: The resource for which the policy is being requested.\nSee the operation documentation for the appropriate value for this field.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+resource}:getIamPolicy", - // "response": { - // "$ref": "Policy" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.list": - -type ProjectsLocationsKeyRingsListCall struct { - s *Service - parent string - urlParams_ gensupport.URLParams - ifNoneMatch_ string - ctx_ context.Context - header_ http.Header -} - -// List: Lists KeyRings. -func (r *ProjectsLocationsKeyRingsService) List(parent string) *ProjectsLocationsKeyRingsListCall { - c := &ProjectsLocationsKeyRingsListCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.parent = parent - return c -} - -// PageSize sets the optional parameter "pageSize": Optional limit on -// the number of KeyRings to include in the -// response. Further KeyRings can subsequently be obtained by -// including the ListKeyRingsResponse.next_page_token in a -// subsequent -// request. If unspecified, the server will pick an appropriate -// default. -func (c *ProjectsLocationsKeyRingsListCall) PageSize(pageSize int64) *ProjectsLocationsKeyRingsListCall { - c.urlParams_.Set("pageSize", fmt.Sprint(pageSize)) - return c -} - -// PageToken sets the optional parameter "pageToken": Optional -// pagination token, returned earlier -// via -// ListKeyRingsResponse.next_page_token. -func (c *ProjectsLocationsKeyRingsListCall) PageToken(pageToken string) *ProjectsLocationsKeyRingsListCall { - c.urlParams_.Set("pageToken", pageToken) - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsListCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsListCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// IfNoneMatch sets the optional parameter which makes the operation -// fail if the object's ETag matches the given value. This is useful for -// getting updates only after the object has changed since the last -// request. Use googleapi.IsNotModified to check whether the response -// error from Do is the result of In-None-Match. -func (c *ProjectsLocationsKeyRingsListCall) IfNoneMatch(entityTag string) *ProjectsLocationsKeyRingsListCall { - c.ifNoneMatch_ = entityTag - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsListCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsListCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsListCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsListCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - if c.ifNoneMatch_ != "" { - reqHeaders.Set("If-None-Match", c.ifNoneMatch_) - } - var body io.Reader = nil - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+parent}/keyRings") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("GET", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "parent": c.parent, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.list" call. -// Exactly one of *ListKeyRingsResponse or error will be non-nil. Any -// non-2xx status code is an error. Response headers are in either -// *ListKeyRingsResponse.ServerResponse.Header or (if a response was -// returned at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsListCall) Do(opts ...googleapi.CallOption) (*ListKeyRingsResponse, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &ListKeyRingsResponse{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Lists KeyRings.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings", - // "httpMethod": "GET", - // "id": "cloudkms.projects.locations.keyRings.list", - // "parameterOrder": [ - // "parent" - // ], - // "parameters": { - // "pageSize": { - // "description": "Optional limit on the number of KeyRings to include in the\nresponse. Further KeyRings can subsequently be obtained by\nincluding the ListKeyRingsResponse.next_page_token in a subsequent\nrequest. If unspecified, the server will pick an appropriate default.", - // "format": "int32", - // "location": "query", - // "type": "integer" - // }, - // "pageToken": { - // "description": "Optional pagination token, returned earlier via\nListKeyRingsResponse.next_page_token.", - // "location": "query", - // "type": "string" - // }, - // "parent": { - // "description": "Required. The resource name of the location associated with the\nKeyRings, in the format `projects/*/locations/*`.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+parent}/keyRings", - // "response": { - // "$ref": "ListKeyRingsResponse" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// Pages invokes f for each page of results. -// A non-nil error returned from f will halt the iteration. -// The provided context supersedes any context provided to the Context method. -func (c *ProjectsLocationsKeyRingsListCall) Pages(ctx context.Context, f func(*ListKeyRingsResponse) error) error { - c.ctx_ = ctx - defer c.PageToken(c.urlParams_.Get("pageToken")) // reset paging to original point - for { - x, err := c.Do() - if err != nil { - return err - } - if err := f(x); err != nil { - return err - } - if x.NextPageToken == "" { - return nil - } - c.PageToken(x.NextPageToken) - } -} - -// method id "cloudkms.projects.locations.keyRings.setIamPolicy": - -type ProjectsLocationsKeyRingsSetIamPolicyCall struct { - s *Service - resource string - setiampolicyrequest *SetIamPolicyRequest - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// SetIamPolicy: Sets the access control policy on the specified -// resource. Replaces any -// existing policy. -func (r *ProjectsLocationsKeyRingsService) SetIamPolicy(resource string, setiampolicyrequest *SetIamPolicyRequest) *ProjectsLocationsKeyRingsSetIamPolicyCall { - c := &ProjectsLocationsKeyRingsSetIamPolicyCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.resource = resource - c.setiampolicyrequest = setiampolicyrequest - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsSetIamPolicyCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsSetIamPolicyCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsSetIamPolicyCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsSetIamPolicyCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsSetIamPolicyCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsSetIamPolicyCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.setiampolicyrequest) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+resource}:setIamPolicy") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("POST", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "resource": c.resource, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.setIamPolicy" call. -// Exactly one of *Policy or error will be non-nil. Any non-2xx status -// code is an error. Response headers are in either -// *Policy.ServerResponse.Header or (if a response was returned at all) -// in error.(*googleapi.Error).Header. Use googleapi.IsNotModified to -// check whether the returned error was because http.StatusNotModified -// was returned. -func (c *ProjectsLocationsKeyRingsSetIamPolicyCall) Do(opts ...googleapi.CallOption) (*Policy, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &Policy{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Sets the access control policy on the specified resource. Replaces any\nexisting policy.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}:setIamPolicy", - // "httpMethod": "POST", - // "id": "cloudkms.projects.locations.keyRings.setIamPolicy", - // "parameterOrder": [ - // "resource" - // ], - // "parameters": { - // "resource": { - // "description": "REQUIRED: The resource for which the policy is being specified.\nSee the operation documentation for the appropriate value for this field.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+resource}:setIamPolicy", - // "request": { - // "$ref": "SetIamPolicyRequest" - // }, - // "response": { - // "$ref": "Policy" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.testIamPermissions": - -type ProjectsLocationsKeyRingsTestIamPermissionsCall struct { - s *Service - resource string - testiampermissionsrequest *TestIamPermissionsRequest - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// TestIamPermissions: Returns permissions that a caller has on the -// specified resource. -// If the resource does not exist, this will return an empty set -// of -// permissions, not a NOT_FOUND error. -// -// Note: This operation is designed to be used for building -// permission-aware -// UIs and command-line tools, not for authorization checking. This -// operation -// may "fail open" without warning. -func (r *ProjectsLocationsKeyRingsService) TestIamPermissions(resource string, testiampermissionsrequest *TestIamPermissionsRequest) *ProjectsLocationsKeyRingsTestIamPermissionsCall { - c := &ProjectsLocationsKeyRingsTestIamPermissionsCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.resource = resource - c.testiampermissionsrequest = testiampermissionsrequest - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsTestIamPermissionsCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsTestIamPermissionsCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsTestIamPermissionsCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsTestIamPermissionsCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsTestIamPermissionsCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsTestIamPermissionsCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.testiampermissionsrequest) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+resource}:testIamPermissions") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("POST", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "resource": c.resource, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.testIamPermissions" call. -// Exactly one of *TestIamPermissionsResponse or error will be non-nil. -// Any non-2xx status code is an error. Response headers are in either -// *TestIamPermissionsResponse.ServerResponse.Header or (if a response -// was returned at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsTestIamPermissionsCall) Do(opts ...googleapi.CallOption) (*TestIamPermissionsResponse, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &TestIamPermissionsResponse{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Returns permissions that a caller has on the specified resource.\nIf the resource does not exist, this will return an empty set of\npermissions, not a NOT_FOUND error.\n\nNote: This operation is designed to be used for building permission-aware\nUIs and command-line tools, not for authorization checking. This operation\nmay \"fail open\" without warning.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}:testIamPermissions", - // "httpMethod": "POST", - // "id": "cloudkms.projects.locations.keyRings.testIamPermissions", - // "parameterOrder": [ - // "resource" - // ], - // "parameters": { - // "resource": { - // "description": "REQUIRED: The resource for which the policy detail is being requested.\nSee the operation documentation for the appropriate value for this field.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+resource}:testIamPermissions", - // "request": { - // "$ref": "TestIamPermissionsRequest" - // }, - // "response": { - // "$ref": "TestIamPermissionsResponse" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.create": - -type ProjectsLocationsKeyRingsCryptoKeysCreateCall struct { - s *Service - parent string - cryptokey *CryptoKey - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// Create: Create a new CryptoKey within a KeyRing. -// -// CryptoKey.purpose is required. -func (r *ProjectsLocationsKeyRingsCryptoKeysService) Create(parent string, cryptokey *CryptoKey) *ProjectsLocationsKeyRingsCryptoKeysCreateCall { - c := &ProjectsLocationsKeyRingsCryptoKeysCreateCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.parent = parent - c.cryptokey = cryptokey - return c -} - -// CryptoKeyId sets the optional parameter "cryptoKeyId": Required. It -// must be unique within a KeyRing and match the regular -// expression `[a-zA-Z0-9_-]{1,63}` -func (c *ProjectsLocationsKeyRingsCryptoKeysCreateCall) CryptoKeyId(cryptoKeyId string) *ProjectsLocationsKeyRingsCryptoKeysCreateCall { - c.urlParams_.Set("cryptoKeyId", cryptoKeyId) - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysCreateCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysCreateCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysCreateCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysCreateCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysCreateCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysCreateCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.cryptokey) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+parent}/cryptoKeys") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("POST", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "parent": c.parent, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.create" call. -// Exactly one of *CryptoKey or error will be non-nil. Any non-2xx -// status code is an error. Response headers are in either -// *CryptoKey.ServerResponse.Header or (if a response was returned at -// all) in error.(*googleapi.Error).Header. Use googleapi.IsNotModified -// to check whether the returned error was because -// http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysCreateCall) Do(opts ...googleapi.CallOption) (*CryptoKey, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &CryptoKey{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Create a new CryptoKey within a KeyRing.\n\nCryptoKey.purpose is required.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys", - // "httpMethod": "POST", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.create", - // "parameterOrder": [ - // "parent" - // ], - // "parameters": { - // "cryptoKeyId": { - // "description": "Required. It must be unique within a KeyRing and match the regular\nexpression `[a-zA-Z0-9_-]{1,63}`", - // "location": "query", - // "type": "string" - // }, - // "parent": { - // "description": "Required. The name of the KeyRing associated with the\nCryptoKeys.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+parent}/cryptoKeys", - // "request": { - // "$ref": "CryptoKey" - // }, - // "response": { - // "$ref": "CryptoKey" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.decrypt": - -type ProjectsLocationsKeyRingsCryptoKeysDecryptCall struct { - s *Service - name string - decryptrequest *DecryptRequest - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// Decrypt: Decrypts data that was protected by Encrypt. -func (r *ProjectsLocationsKeyRingsCryptoKeysService) Decrypt(name string, decryptrequest *DecryptRequest) *ProjectsLocationsKeyRingsCryptoKeysDecryptCall { - c := &ProjectsLocationsKeyRingsCryptoKeysDecryptCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.name = name - c.decryptrequest = decryptrequest - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysDecryptCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysDecryptCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysDecryptCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysDecryptCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysDecryptCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysDecryptCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.decryptrequest) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+name}:decrypt") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("POST", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "name": c.name, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.decrypt" call. -// Exactly one of *DecryptResponse or error will be non-nil. Any non-2xx -// status code is an error. Response headers are in either -// *DecryptResponse.ServerResponse.Header or (if a response was returned -// at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysDecryptCall) Do(opts ...googleapi.CallOption) (*DecryptResponse, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &DecryptResponse{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Decrypts data that was protected by Encrypt.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}:decrypt", - // "httpMethod": "POST", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.decrypt", - // "parameterOrder": [ - // "name" - // ], - // "parameters": { - // "name": { - // "description": "Required. The resource name of the CryptoKey to use for decryption.\nThe server will choose the appropriate version.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+name}:decrypt", - // "request": { - // "$ref": "DecryptRequest" - // }, - // "response": { - // "$ref": "DecryptResponse" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.encrypt": - -type ProjectsLocationsKeyRingsCryptoKeysEncryptCall struct { - s *Service - name string - encryptrequest *EncryptRequest - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// Encrypt: Encrypts data, so that it can only be recovered by a call to -// Decrypt. -func (r *ProjectsLocationsKeyRingsCryptoKeysService) Encrypt(name string, encryptrequest *EncryptRequest) *ProjectsLocationsKeyRingsCryptoKeysEncryptCall { - c := &ProjectsLocationsKeyRingsCryptoKeysEncryptCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.name = name - c.encryptrequest = encryptrequest - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysEncryptCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysEncryptCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysEncryptCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysEncryptCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysEncryptCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysEncryptCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.encryptrequest) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+name}:encrypt") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("POST", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "name": c.name, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.encrypt" call. -// Exactly one of *EncryptResponse or error will be non-nil. Any non-2xx -// status code is an error. Response headers are in either -// *EncryptResponse.ServerResponse.Header or (if a response was returned -// at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysEncryptCall) Do(opts ...googleapi.CallOption) (*EncryptResponse, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &EncryptResponse{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Encrypts data, so that it can only be recovered by a call to Decrypt.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}:encrypt", - // "httpMethod": "POST", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.encrypt", - // "parameterOrder": [ - // "name" - // ], - // "parameters": { - // "name": { - // "description": "Required. The resource name of the CryptoKey or CryptoKeyVersion\nto use for encryption.\n\nIf a CryptoKey is specified, the server will use its\nprimary version.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/.+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+name}:encrypt", - // "request": { - // "$ref": "EncryptRequest" - // }, - // "response": { - // "$ref": "EncryptResponse" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.get": - -type ProjectsLocationsKeyRingsCryptoKeysGetCall struct { - s *Service - name string - urlParams_ gensupport.URLParams - ifNoneMatch_ string - ctx_ context.Context - header_ http.Header -} - -// Get: Returns metadata for a given CryptoKey, as well as its -// primary CryptoKeyVersion. -func (r *ProjectsLocationsKeyRingsCryptoKeysService) Get(name string) *ProjectsLocationsKeyRingsCryptoKeysGetCall { - c := &ProjectsLocationsKeyRingsCryptoKeysGetCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.name = name - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysGetCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysGetCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// IfNoneMatch sets the optional parameter which makes the operation -// fail if the object's ETag matches the given value. This is useful for -// getting updates only after the object has changed since the last -// request. Use googleapi.IsNotModified to check whether the response -// error from Do is the result of In-None-Match. -func (c *ProjectsLocationsKeyRingsCryptoKeysGetCall) IfNoneMatch(entityTag string) *ProjectsLocationsKeyRingsCryptoKeysGetCall { - c.ifNoneMatch_ = entityTag - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysGetCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysGetCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysGetCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysGetCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - if c.ifNoneMatch_ != "" { - reqHeaders.Set("If-None-Match", c.ifNoneMatch_) - } - var body io.Reader = nil - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+name}") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("GET", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "name": c.name, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.get" call. -// Exactly one of *CryptoKey or error will be non-nil. Any non-2xx -// status code is an error. Response headers are in either -// *CryptoKey.ServerResponse.Header or (if a response was returned at -// all) in error.(*googleapi.Error).Header. Use googleapi.IsNotModified -// to check whether the returned error was because -// http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysGetCall) Do(opts ...googleapi.CallOption) (*CryptoKey, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &CryptoKey{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Returns metadata for a given CryptoKey, as well as its\nprimary CryptoKeyVersion.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}", - // "httpMethod": "GET", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.get", - // "parameterOrder": [ - // "name" - // ], - // "parameters": { - // "name": { - // "description": "The name of the CryptoKey to get.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+name}", - // "response": { - // "$ref": "CryptoKey" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.getIamPolicy": - -type ProjectsLocationsKeyRingsCryptoKeysGetIamPolicyCall struct { - s *Service - resource string - urlParams_ gensupport.URLParams - ifNoneMatch_ string - ctx_ context.Context - header_ http.Header -} - -// GetIamPolicy: Gets the access control policy for a resource. -// Returns an empty policy if the resource exists and does not have a -// policy -// set. -func (r *ProjectsLocationsKeyRingsCryptoKeysService) GetIamPolicy(resource string) *ProjectsLocationsKeyRingsCryptoKeysGetIamPolicyCall { - c := &ProjectsLocationsKeyRingsCryptoKeysGetIamPolicyCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.resource = resource - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysGetIamPolicyCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysGetIamPolicyCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// IfNoneMatch sets the optional parameter which makes the operation -// fail if the object's ETag matches the given value. This is useful for -// getting updates only after the object has changed since the last -// request. Use googleapi.IsNotModified to check whether the response -// error from Do is the result of In-None-Match. -func (c *ProjectsLocationsKeyRingsCryptoKeysGetIamPolicyCall) IfNoneMatch(entityTag string) *ProjectsLocationsKeyRingsCryptoKeysGetIamPolicyCall { - c.ifNoneMatch_ = entityTag - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysGetIamPolicyCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysGetIamPolicyCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysGetIamPolicyCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysGetIamPolicyCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - if c.ifNoneMatch_ != "" { - reqHeaders.Set("If-None-Match", c.ifNoneMatch_) - } - var body io.Reader = nil - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+resource}:getIamPolicy") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("GET", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "resource": c.resource, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.getIamPolicy" call. -// Exactly one of *Policy or error will be non-nil. Any non-2xx status -// code is an error. Response headers are in either -// *Policy.ServerResponse.Header or (if a response was returned at all) -// in error.(*googleapi.Error).Header. Use googleapi.IsNotModified to -// check whether the returned error was because http.StatusNotModified -// was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysGetIamPolicyCall) Do(opts ...googleapi.CallOption) (*Policy, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &Policy{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Gets the access control policy for a resource.\nReturns an empty policy if the resource exists and does not have a policy\nset.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}:getIamPolicy", - // "httpMethod": "GET", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.getIamPolicy", - // "parameterOrder": [ - // "resource" - // ], - // "parameters": { - // "resource": { - // "description": "REQUIRED: The resource for which the policy is being requested.\nSee the operation documentation for the appropriate value for this field.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+resource}:getIamPolicy", - // "response": { - // "$ref": "Policy" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.list": - -type ProjectsLocationsKeyRingsCryptoKeysListCall struct { - s *Service - parent string - urlParams_ gensupport.URLParams - ifNoneMatch_ string - ctx_ context.Context - header_ http.Header -} - -// List: Lists CryptoKeys. -func (r *ProjectsLocationsKeyRingsCryptoKeysService) List(parent string) *ProjectsLocationsKeyRingsCryptoKeysListCall { - c := &ProjectsLocationsKeyRingsCryptoKeysListCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.parent = parent - return c -} - -// PageSize sets the optional parameter "pageSize": Optional limit on -// the number of CryptoKeys to include in the -// response. Further CryptoKeys can subsequently be obtained -// by -// including the ListCryptoKeysResponse.next_page_token in a -// subsequent -// request. If unspecified, the server will pick an appropriate -// default. -func (c *ProjectsLocationsKeyRingsCryptoKeysListCall) PageSize(pageSize int64) *ProjectsLocationsKeyRingsCryptoKeysListCall { - c.urlParams_.Set("pageSize", fmt.Sprint(pageSize)) - return c -} - -// PageToken sets the optional parameter "pageToken": Optional -// pagination token, returned earlier -// via -// ListCryptoKeysResponse.next_page_token. -func (c *ProjectsLocationsKeyRingsCryptoKeysListCall) PageToken(pageToken string) *ProjectsLocationsKeyRingsCryptoKeysListCall { - c.urlParams_.Set("pageToken", pageToken) - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysListCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysListCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// IfNoneMatch sets the optional parameter which makes the operation -// fail if the object's ETag matches the given value. This is useful for -// getting updates only after the object has changed since the last -// request. Use googleapi.IsNotModified to check whether the response -// error from Do is the result of In-None-Match. -func (c *ProjectsLocationsKeyRingsCryptoKeysListCall) IfNoneMatch(entityTag string) *ProjectsLocationsKeyRingsCryptoKeysListCall { - c.ifNoneMatch_ = entityTag - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysListCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysListCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysListCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysListCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - if c.ifNoneMatch_ != "" { - reqHeaders.Set("If-None-Match", c.ifNoneMatch_) - } - var body io.Reader = nil - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+parent}/cryptoKeys") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("GET", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "parent": c.parent, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.list" call. -// Exactly one of *ListCryptoKeysResponse or error will be non-nil. Any -// non-2xx status code is an error. Response headers are in either -// *ListCryptoKeysResponse.ServerResponse.Header or (if a response was -// returned at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysListCall) Do(opts ...googleapi.CallOption) (*ListCryptoKeysResponse, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &ListCryptoKeysResponse{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Lists CryptoKeys.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys", - // "httpMethod": "GET", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.list", - // "parameterOrder": [ - // "parent" - // ], - // "parameters": { - // "pageSize": { - // "description": "Optional limit on the number of CryptoKeys to include in the\nresponse. Further CryptoKeys can subsequently be obtained by\nincluding the ListCryptoKeysResponse.next_page_token in a subsequent\nrequest. If unspecified, the server will pick an appropriate default.", - // "format": "int32", - // "location": "query", - // "type": "integer" - // }, - // "pageToken": { - // "description": "Optional pagination token, returned earlier via\nListCryptoKeysResponse.next_page_token.", - // "location": "query", - // "type": "string" - // }, - // "parent": { - // "description": "Required. The resource name of the KeyRing to list, in the format\n`projects/*/locations/*/keyRings/*`.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+parent}/cryptoKeys", - // "response": { - // "$ref": "ListCryptoKeysResponse" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// Pages invokes f for each page of results. -// A non-nil error returned from f will halt the iteration. -// The provided context supersedes any context provided to the Context method. -func (c *ProjectsLocationsKeyRingsCryptoKeysListCall) Pages(ctx context.Context, f func(*ListCryptoKeysResponse) error) error { - c.ctx_ = ctx - defer c.PageToken(c.urlParams_.Get("pageToken")) // reset paging to original point - for { - x, err := c.Do() - if err != nil { - return err - } - if err := f(x); err != nil { - return err - } - if x.NextPageToken == "" { - return nil - } - c.PageToken(x.NextPageToken) - } -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.patch": - -type ProjectsLocationsKeyRingsCryptoKeysPatchCall struct { - s *Service - name string - cryptokey *CryptoKey - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// Patch: Update a CryptoKey. -func (r *ProjectsLocationsKeyRingsCryptoKeysService) Patch(name string, cryptokey *CryptoKey) *ProjectsLocationsKeyRingsCryptoKeysPatchCall { - c := &ProjectsLocationsKeyRingsCryptoKeysPatchCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.name = name - c.cryptokey = cryptokey - return c -} - -// UpdateMask sets the optional parameter "updateMask": Required list of -// fields to be updated in this request. -func (c *ProjectsLocationsKeyRingsCryptoKeysPatchCall) UpdateMask(updateMask string) *ProjectsLocationsKeyRingsCryptoKeysPatchCall { - c.urlParams_.Set("updateMask", updateMask) - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysPatchCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysPatchCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysPatchCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysPatchCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysPatchCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysPatchCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.cryptokey) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+name}") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("PATCH", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "name": c.name, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.patch" call. -// Exactly one of *CryptoKey or error will be non-nil. Any non-2xx -// status code is an error. Response headers are in either -// *CryptoKey.ServerResponse.Header or (if a response was returned at -// all) in error.(*googleapi.Error).Header. Use googleapi.IsNotModified -// to check whether the returned error was because -// http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysPatchCall) Do(opts ...googleapi.CallOption) (*CryptoKey, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &CryptoKey{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Update a CryptoKey.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}", - // "httpMethod": "PATCH", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.patch", - // "parameterOrder": [ - // "name" - // ], - // "parameters": { - // "name": { - // "description": "Output only. The resource name for this CryptoKey in the format\n`projects/*/locations/*/keyRings/*/cryptoKeys/*`.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - // "required": true, - // "type": "string" - // }, - // "updateMask": { - // "description": "Required list of fields to be updated in this request.", - // "format": "google-fieldmask", - // "location": "query", - // "type": "string" - // } - // }, - // "path": "v1/{+name}", - // "request": { - // "$ref": "CryptoKey" - // }, - // "response": { - // "$ref": "CryptoKey" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.setIamPolicy": - -type ProjectsLocationsKeyRingsCryptoKeysSetIamPolicyCall struct { - s *Service - resource string - setiampolicyrequest *SetIamPolicyRequest - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// SetIamPolicy: Sets the access control policy on the specified -// resource. Replaces any -// existing policy. -func (r *ProjectsLocationsKeyRingsCryptoKeysService) SetIamPolicy(resource string, setiampolicyrequest *SetIamPolicyRequest) *ProjectsLocationsKeyRingsCryptoKeysSetIamPolicyCall { - c := &ProjectsLocationsKeyRingsCryptoKeysSetIamPolicyCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.resource = resource - c.setiampolicyrequest = setiampolicyrequest - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysSetIamPolicyCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysSetIamPolicyCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysSetIamPolicyCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysSetIamPolicyCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysSetIamPolicyCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysSetIamPolicyCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.setiampolicyrequest) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+resource}:setIamPolicy") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("POST", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "resource": c.resource, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.setIamPolicy" call. -// Exactly one of *Policy or error will be non-nil. Any non-2xx status -// code is an error. Response headers are in either -// *Policy.ServerResponse.Header or (if a response was returned at all) -// in error.(*googleapi.Error).Header. Use googleapi.IsNotModified to -// check whether the returned error was because http.StatusNotModified -// was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysSetIamPolicyCall) Do(opts ...googleapi.CallOption) (*Policy, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &Policy{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Sets the access control policy on the specified resource. Replaces any\nexisting policy.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}:setIamPolicy", - // "httpMethod": "POST", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.setIamPolicy", - // "parameterOrder": [ - // "resource" - // ], - // "parameters": { - // "resource": { - // "description": "REQUIRED: The resource for which the policy is being specified.\nSee the operation documentation for the appropriate value for this field.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+resource}:setIamPolicy", - // "request": { - // "$ref": "SetIamPolicyRequest" - // }, - // "response": { - // "$ref": "Policy" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.testIamPermissions": - -type ProjectsLocationsKeyRingsCryptoKeysTestIamPermissionsCall struct { - s *Service - resource string - testiampermissionsrequest *TestIamPermissionsRequest - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// TestIamPermissions: Returns permissions that a caller has on the -// specified resource. -// If the resource does not exist, this will return an empty set -// of -// permissions, not a NOT_FOUND error. -// -// Note: This operation is designed to be used for building -// permission-aware -// UIs and command-line tools, not for authorization checking. This -// operation -// may "fail open" without warning. -func (r *ProjectsLocationsKeyRingsCryptoKeysService) TestIamPermissions(resource string, testiampermissionsrequest *TestIamPermissionsRequest) *ProjectsLocationsKeyRingsCryptoKeysTestIamPermissionsCall { - c := &ProjectsLocationsKeyRingsCryptoKeysTestIamPermissionsCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.resource = resource - c.testiampermissionsrequest = testiampermissionsrequest - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysTestIamPermissionsCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysTestIamPermissionsCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysTestIamPermissionsCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysTestIamPermissionsCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysTestIamPermissionsCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysTestIamPermissionsCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.testiampermissionsrequest) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+resource}:testIamPermissions") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("POST", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "resource": c.resource, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.testIamPermissions" call. -// Exactly one of *TestIamPermissionsResponse or error will be non-nil. -// Any non-2xx status code is an error. Response headers are in either -// *TestIamPermissionsResponse.ServerResponse.Header or (if a response -// was returned at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysTestIamPermissionsCall) Do(opts ...googleapi.CallOption) (*TestIamPermissionsResponse, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &TestIamPermissionsResponse{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Returns permissions that a caller has on the specified resource.\nIf the resource does not exist, this will return an empty set of\npermissions, not a NOT_FOUND error.\n\nNote: This operation is designed to be used for building permission-aware\nUIs and command-line tools, not for authorization checking. This operation\nmay \"fail open\" without warning.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}:testIamPermissions", - // "httpMethod": "POST", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.testIamPermissions", - // "parameterOrder": [ - // "resource" - // ], - // "parameters": { - // "resource": { - // "description": "REQUIRED: The resource for which the policy detail is being requested.\nSee the operation documentation for the appropriate value for this field.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+resource}:testIamPermissions", - // "request": { - // "$ref": "TestIamPermissionsRequest" - // }, - // "response": { - // "$ref": "TestIamPermissionsResponse" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.updatePrimaryVersion": - -type ProjectsLocationsKeyRingsCryptoKeysUpdatePrimaryVersionCall struct { - s *Service - name string - updatecryptokeyprimaryversionrequest *UpdateCryptoKeyPrimaryVersionRequest - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// UpdatePrimaryVersion: Update the version of a CryptoKey that will be -// used in Encrypt -func (r *ProjectsLocationsKeyRingsCryptoKeysService) UpdatePrimaryVersion(name string, updatecryptokeyprimaryversionrequest *UpdateCryptoKeyPrimaryVersionRequest) *ProjectsLocationsKeyRingsCryptoKeysUpdatePrimaryVersionCall { - c := &ProjectsLocationsKeyRingsCryptoKeysUpdatePrimaryVersionCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.name = name - c.updatecryptokeyprimaryversionrequest = updatecryptokeyprimaryversionrequest - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysUpdatePrimaryVersionCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysUpdatePrimaryVersionCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysUpdatePrimaryVersionCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysUpdatePrimaryVersionCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysUpdatePrimaryVersionCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysUpdatePrimaryVersionCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.updatecryptokeyprimaryversionrequest) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+name}:updatePrimaryVersion") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("POST", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "name": c.name, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.updatePrimaryVersion" call. -// Exactly one of *CryptoKey or error will be non-nil. Any non-2xx -// status code is an error. Response headers are in either -// *CryptoKey.ServerResponse.Header or (if a response was returned at -// all) in error.(*googleapi.Error).Header. Use googleapi.IsNotModified -// to check whether the returned error was because -// http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysUpdatePrimaryVersionCall) Do(opts ...googleapi.CallOption) (*CryptoKey, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &CryptoKey{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Update the version of a CryptoKey that will be used in Encrypt", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}:updatePrimaryVersion", - // "httpMethod": "POST", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.updatePrimaryVersion", - // "parameterOrder": [ - // "name" - // ], - // "parameters": { - // "name": { - // "description": "The resource name of the CryptoKey to update.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+name}:updatePrimaryVersion", - // "request": { - // "$ref": "UpdateCryptoKeyPrimaryVersionRequest" - // }, - // "response": { - // "$ref": "CryptoKey" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.create": - -type ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsCreateCall struct { - s *Service - parent string - cryptokeyversion *CryptoKeyVersion - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// Create: Create a new CryptoKeyVersion in a CryptoKey. -// -// The server will assign the next sequential id. If unset, -// state will be set to -// ENABLED. -func (r *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsService) Create(parent string, cryptokeyversion *CryptoKeyVersion) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsCreateCall { - c := &ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsCreateCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.parent = parent - c.cryptokeyversion = cryptokeyversion - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsCreateCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsCreateCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsCreateCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsCreateCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsCreateCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsCreateCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.cryptokeyversion) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+parent}/cryptoKeyVersions") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("POST", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "parent": c.parent, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.create" call. -// Exactly one of *CryptoKeyVersion or error will be non-nil. Any -// non-2xx status code is an error. Response headers are in either -// *CryptoKeyVersion.ServerResponse.Header or (if a response was -// returned at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsCreateCall) Do(opts ...googleapi.CallOption) (*CryptoKeyVersion, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &CryptoKeyVersion{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Create a new CryptoKeyVersion in a CryptoKey.\n\nThe server will assign the next sequential id. If unset,\nstate will be set to\nENABLED.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}/cryptoKeyVersions", - // "httpMethod": "POST", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.create", - // "parameterOrder": [ - // "parent" - // ], - // "parameters": { - // "parent": { - // "description": "Required. The name of the CryptoKey associated with\nthe CryptoKeyVersions.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+parent}/cryptoKeyVersions", - // "request": { - // "$ref": "CryptoKeyVersion" - // }, - // "response": { - // "$ref": "CryptoKeyVersion" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.destroy": - -type ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsDestroyCall struct { - s *Service - name string - destroycryptokeyversionrequest *DestroyCryptoKeyVersionRequest - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// Destroy: Schedule a CryptoKeyVersion for destruction. -// -// Upon calling this method, CryptoKeyVersion.state will be set -// to -// DESTROY_SCHEDULED -// and destroy_time will be set to a time 24 -// hours in the future, at which point the state -// will be changed to -// DESTROYED, and the key -// material will be irrevocably destroyed. -// -// Before the destroy_time is reached, -// RestoreCryptoKeyVersion may be called to reverse the process. -func (r *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsService) Destroy(name string, destroycryptokeyversionrequest *DestroyCryptoKeyVersionRequest) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsDestroyCall { - c := &ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsDestroyCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.name = name - c.destroycryptokeyversionrequest = destroycryptokeyversionrequest - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsDestroyCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsDestroyCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsDestroyCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsDestroyCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsDestroyCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsDestroyCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.destroycryptokeyversionrequest) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+name}:destroy") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("POST", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "name": c.name, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.destroy" call. -// Exactly one of *CryptoKeyVersion or error will be non-nil. Any -// non-2xx status code is an error. Response headers are in either -// *CryptoKeyVersion.ServerResponse.Header or (if a response was -// returned at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsDestroyCall) Do(opts ...googleapi.CallOption) (*CryptoKeyVersion, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &CryptoKeyVersion{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Schedule a CryptoKeyVersion for destruction.\n\nUpon calling this method, CryptoKeyVersion.state will be set to\nDESTROY_SCHEDULED\nand destroy_time will be set to a time 24\nhours in the future, at which point the state\nwill be changed to\nDESTROYED, and the key\nmaterial will be irrevocably destroyed.\n\nBefore the destroy_time is reached,\nRestoreCryptoKeyVersion may be called to reverse the process.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}/cryptoKeyVersions/{cryptoKeyVersionsId}:destroy", - // "httpMethod": "POST", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.destroy", - // "parameterOrder": [ - // "name" - // ], - // "parameters": { - // "name": { - // "description": "The resource name of the CryptoKeyVersion to destroy.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+/cryptoKeyVersions/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+name}:destroy", - // "request": { - // "$ref": "DestroyCryptoKeyVersionRequest" - // }, - // "response": { - // "$ref": "CryptoKeyVersion" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.get": - -type ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsGetCall struct { - s *Service - name string - urlParams_ gensupport.URLParams - ifNoneMatch_ string - ctx_ context.Context - header_ http.Header -} - -// Get: Returns metadata for a given CryptoKeyVersion. -func (r *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsService) Get(name string) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsGetCall { - c := &ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsGetCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.name = name - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsGetCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsGetCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// IfNoneMatch sets the optional parameter which makes the operation -// fail if the object's ETag matches the given value. This is useful for -// getting updates only after the object has changed since the last -// request. Use googleapi.IsNotModified to check whether the response -// error from Do is the result of In-None-Match. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsGetCall) IfNoneMatch(entityTag string) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsGetCall { - c.ifNoneMatch_ = entityTag - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsGetCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsGetCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsGetCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsGetCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - if c.ifNoneMatch_ != "" { - reqHeaders.Set("If-None-Match", c.ifNoneMatch_) - } - var body io.Reader = nil - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+name}") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("GET", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "name": c.name, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.get" call. -// Exactly one of *CryptoKeyVersion or error will be non-nil. Any -// non-2xx status code is an error. Response headers are in either -// *CryptoKeyVersion.ServerResponse.Header or (if a response was -// returned at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsGetCall) Do(opts ...googleapi.CallOption) (*CryptoKeyVersion, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &CryptoKeyVersion{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Returns metadata for a given CryptoKeyVersion.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}/cryptoKeyVersions/{cryptoKeyVersionsId}", - // "httpMethod": "GET", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.get", - // "parameterOrder": [ - // "name" - // ], - // "parameters": { - // "name": { - // "description": "The name of the CryptoKeyVersion to get.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+/cryptoKeyVersions/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+name}", - // "response": { - // "$ref": "CryptoKeyVersion" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.list": - -type ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall struct { - s *Service - parent string - urlParams_ gensupport.URLParams - ifNoneMatch_ string - ctx_ context.Context - header_ http.Header -} - -// List: Lists CryptoKeyVersions. -func (r *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsService) List(parent string) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall { - c := &ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.parent = parent - return c -} - -// PageSize sets the optional parameter "pageSize": Optional limit on -// the number of CryptoKeyVersions to -// include in the response. Further CryptoKeyVersions can -// subsequently be obtained by including -// the -// ListCryptoKeyVersionsResponse.next_page_token in a subsequent -// request. -// If unspecified, the server will pick an appropriate default. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall) PageSize(pageSize int64) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall { - c.urlParams_.Set("pageSize", fmt.Sprint(pageSize)) - return c -} - -// PageToken sets the optional parameter "pageToken": Optional -// pagination token, returned earlier -// via -// ListCryptoKeyVersionsResponse.next_page_token. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall) PageToken(pageToken string) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall { - c.urlParams_.Set("pageToken", pageToken) - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// IfNoneMatch sets the optional parameter which makes the operation -// fail if the object's ETag matches the given value. This is useful for -// getting updates only after the object has changed since the last -// request. Use googleapi.IsNotModified to check whether the response -// error from Do is the result of In-None-Match. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall) IfNoneMatch(entityTag string) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall { - c.ifNoneMatch_ = entityTag - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - if c.ifNoneMatch_ != "" { - reqHeaders.Set("If-None-Match", c.ifNoneMatch_) - } - var body io.Reader = nil - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+parent}/cryptoKeyVersions") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("GET", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "parent": c.parent, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.list" call. -// Exactly one of *ListCryptoKeyVersionsResponse or error will be -// non-nil. Any non-2xx status code is an error. Response headers are in -// either *ListCryptoKeyVersionsResponse.ServerResponse.Header or (if a -// response was returned at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall) Do(opts ...googleapi.CallOption) (*ListCryptoKeyVersionsResponse, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &ListCryptoKeyVersionsResponse{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Lists CryptoKeyVersions.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}/cryptoKeyVersions", - // "httpMethod": "GET", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.list", - // "parameterOrder": [ - // "parent" - // ], - // "parameters": { - // "pageSize": { - // "description": "Optional limit on the number of CryptoKeyVersions to\ninclude in the response. Further CryptoKeyVersions can\nsubsequently be obtained by including the\nListCryptoKeyVersionsResponse.next_page_token in a subsequent request.\nIf unspecified, the server will pick an appropriate default.", - // "format": "int32", - // "location": "query", - // "type": "integer" - // }, - // "pageToken": { - // "description": "Optional pagination token, returned earlier via\nListCryptoKeyVersionsResponse.next_page_token.", - // "location": "query", - // "type": "string" - // }, - // "parent": { - // "description": "Required. The resource name of the CryptoKey to list, in the format\n`projects/*/locations/*/keyRings/*/cryptoKeys/*`.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+parent}/cryptoKeyVersions", - // "response": { - // "$ref": "ListCryptoKeyVersionsResponse" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// Pages invokes f for each page of results. -// A non-nil error returned from f will halt the iteration. -// The provided context supersedes any context provided to the Context method. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsListCall) Pages(ctx context.Context, f func(*ListCryptoKeyVersionsResponse) error) error { - c.ctx_ = ctx - defer c.PageToken(c.urlParams_.Get("pageToken")) // reset paging to original point - for { - x, err := c.Do() - if err != nil { - return err - } - if err := f(x); err != nil { - return err - } - if x.NextPageToken == "" { - return nil - } - c.PageToken(x.NextPageToken) - } -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.patch": - -type ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsPatchCall struct { - s *Service - name string - cryptokeyversion *CryptoKeyVersion - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// Patch: Update a CryptoKeyVersion's metadata. -// -// state may be changed between -// ENABLED and -// DISABLED using this -// method. See DestroyCryptoKeyVersion and RestoreCryptoKeyVersion -// to -// move between other states. -func (r *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsService) Patch(name string, cryptokeyversion *CryptoKeyVersion) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsPatchCall { - c := &ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsPatchCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.name = name - c.cryptokeyversion = cryptokeyversion - return c -} - -// UpdateMask sets the optional parameter "updateMask": Required list of -// fields to be updated in this request. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsPatchCall) UpdateMask(updateMask string) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsPatchCall { - c.urlParams_.Set("updateMask", updateMask) - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsPatchCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsPatchCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsPatchCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsPatchCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsPatchCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsPatchCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.cryptokeyversion) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+name}") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("PATCH", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "name": c.name, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.patch" call. -// Exactly one of *CryptoKeyVersion or error will be non-nil. Any -// non-2xx status code is an error. Response headers are in either -// *CryptoKeyVersion.ServerResponse.Header or (if a response was -// returned at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsPatchCall) Do(opts ...googleapi.CallOption) (*CryptoKeyVersion, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &CryptoKeyVersion{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Update a CryptoKeyVersion's metadata.\n\nstate may be changed between\nENABLED and\nDISABLED using this\nmethod. See DestroyCryptoKeyVersion and RestoreCryptoKeyVersion to\nmove between other states.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}/cryptoKeyVersions/{cryptoKeyVersionsId}", - // "httpMethod": "PATCH", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.patch", - // "parameterOrder": [ - // "name" - // ], - // "parameters": { - // "name": { - // "description": "Output only. The resource name for this CryptoKeyVersion in the format\n`projects/*/locations/*/keyRings/*/cryptoKeys/*/cryptoKeyVersions/*`.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+/cryptoKeyVersions/[^/]+$", - // "required": true, - // "type": "string" - // }, - // "updateMask": { - // "description": "Required list of fields to be updated in this request.", - // "format": "google-fieldmask", - // "location": "query", - // "type": "string" - // } - // }, - // "path": "v1/{+name}", - // "request": { - // "$ref": "CryptoKeyVersion" - // }, - // "response": { - // "$ref": "CryptoKeyVersion" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -} - -// method id "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.restore": - -type ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsRestoreCall struct { - s *Service - name string - restorecryptokeyversionrequest *RestoreCryptoKeyVersionRequest - urlParams_ gensupport.URLParams - ctx_ context.Context - header_ http.Header -} - -// Restore: Restore a CryptoKeyVersion in -// the -// DESTROY_SCHEDULED, -// state. -// -// Upon restoration of the CryptoKeyVersion, state -// will be set to DISABLED, -// and destroy_time will be cleared. -func (r *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsService) Restore(name string, restorecryptokeyversionrequest *RestoreCryptoKeyVersionRequest) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsRestoreCall { - c := &ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsRestoreCall{s: r.s, urlParams_: make(gensupport.URLParams)} - c.name = name - c.restorecryptokeyversionrequest = restorecryptokeyversionrequest - return c -} - -// Fields allows partial responses to be retrieved. See -// https://developers.google.com/gdata/docs/2.0/basics#PartialResponse -// for more information. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsRestoreCall) Fields(s ...googleapi.Field) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsRestoreCall { - c.urlParams_.Set("fields", googleapi.CombineFields(s)) - return c -} - -// Context sets the context to be used in this call's Do method. Any -// pending HTTP request will be aborted if the provided context is -// canceled. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsRestoreCall) Context(ctx context.Context) *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsRestoreCall { - c.ctx_ = ctx - return c -} - -// Header returns an http.Header that can be modified by the caller to -// add HTTP headers to the request. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsRestoreCall) Header() http.Header { - if c.header_ == nil { - c.header_ = make(http.Header) - } - return c.header_ -} - -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsRestoreCall) doRequest(alt string) (*http.Response, error) { - reqHeaders := make(http.Header) - for k, v := range c.header_ { - reqHeaders[k] = v - } - reqHeaders.Set("User-Agent", c.s.userAgent()) - var body io.Reader = nil - body, err := googleapi.WithoutDataWrapper.JSONReader(c.restorecryptokeyversionrequest) - if err != nil { - return nil, err - } - reqHeaders.Set("Content-Type", "application/json") - c.urlParams_.Set("alt", alt) - urls := googleapi.ResolveRelative(c.s.BasePath, "v1/{+name}:restore") - urls += "?" + c.urlParams_.Encode() - req, _ := http.NewRequest("POST", urls, body) - req.Header = reqHeaders - googleapi.Expand(req.URL, map[string]string{ - "name": c.name, - }) - return gensupport.SendRequest(c.ctx_, c.s.client, req) -} - -// Do executes the "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.restore" call. -// Exactly one of *CryptoKeyVersion or error will be non-nil. Any -// non-2xx status code is an error. Response headers are in either -// *CryptoKeyVersion.ServerResponse.Header or (if a response was -// returned at all) in error.(*googleapi.Error).Header. Use -// googleapi.IsNotModified to check whether the returned error was -// because http.StatusNotModified was returned. -func (c *ProjectsLocationsKeyRingsCryptoKeysCryptoKeyVersionsRestoreCall) Do(opts ...googleapi.CallOption) (*CryptoKeyVersion, error) { - gensupport.SetOptions(c.urlParams_, opts...) - res, err := c.doRequest("json") - if res != nil && res.StatusCode == http.StatusNotModified { - if res.Body != nil { - res.Body.Close() - } - return nil, &googleapi.Error{ - Code: res.StatusCode, - Header: res.Header, - } - } - if err != nil { - return nil, err - } - defer googleapi.CloseBody(res) - if err := googleapi.CheckResponse(res); err != nil { - return nil, err - } - ret := &CryptoKeyVersion{ - ServerResponse: googleapi.ServerResponse{ - Header: res.Header, - HTTPStatusCode: res.StatusCode, - }, - } - target := &ret - if err := json.NewDecoder(res.Body).Decode(target); err != nil { - return nil, err - } - return ret, nil - // { - // "description": "Restore a CryptoKeyVersion in the\nDESTROY_SCHEDULED,\nstate.\n\nUpon restoration of the CryptoKeyVersion, state\nwill be set to DISABLED,\nand destroy_time will be cleared.", - // "flatPath": "v1/projects/{projectsId}/locations/{locationsId}/keyRings/{keyRingsId}/cryptoKeys/{cryptoKeysId}/cryptoKeyVersions/{cryptoKeyVersionsId}:restore", - // "httpMethod": "POST", - // "id": "cloudkms.projects.locations.keyRings.cryptoKeys.cryptoKeyVersions.restore", - // "parameterOrder": [ - // "name" - // ], - // "parameters": { - // "name": { - // "description": "The resource name of the CryptoKeyVersion to restore.", - // "location": "path", - // "pattern": "^projects/[^/]+/locations/[^/]+/keyRings/[^/]+/cryptoKeys/[^/]+/cryptoKeyVersions/[^/]+$", - // "required": true, - // "type": "string" - // } - // }, - // "path": "v1/{+name}:restore", - // "request": { - // "$ref": "RestoreCryptoKeyVersionRequest" - // }, - // "response": { - // "$ref": "CryptoKeyVersion" - // }, - // "scopes": [ - // "https://www.googleapis.com/auth/cloud-platform" - // ] - // } - -}