diff --git a/api/openapi-spec/swagger.json b/api/openapi-spec/swagger.json index b0972e6c3de..9dad2134d59 100644 --- a/api/openapi-spec/swagger.json +++ b/api/openapi-spec/swagger.json @@ -15704,7 +15704,7 @@ "type": "object" }, "io.k8s.apimachinery.pkg.api.resource.Quantity": { - "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", "type": "string" }, "io.k8s.apimachinery.pkg.apis.meta.v1.APIGroup": { diff --git a/api/openapi-spec/v3/api__v1_openapi.json b/api/openapi-spec/v3/api__v1_openapi.json index 194cda18dca..f36ce290e39 100644 --- a/api/openapi-spec/v3/api__v1_openapi.json +++ b/api/openapi-spec/v3/api__v1_openapi.json @@ -7771,7 +7771,7 @@ ] }, "io.k8s.apimachinery.pkg.api.resource.Quantity": { - "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", "oneOf": [ { "type": "string" diff --git a/api/openapi-spec/v3/apis__apps__v1_openapi.json b/api/openapi-spec/v3/apis__apps__v1_openapi.json index 4cf45fc90eb..b1c1a35fd0b 100644 --- a/api/openapi-spec/v3/apis__apps__v1_openapi.json +++ b/api/openapi-spec/v3/apis__apps__v1_openapi.json @@ -4816,7 +4816,7 @@ "type": "object" }, "io.k8s.apimachinery.pkg.api.resource.Quantity": { - "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", "oneOf": [ { "type": "string" diff --git a/api/openapi-spec/v3/apis__autoscaling__v2_openapi.json b/api/openapi-spec/v3/apis__autoscaling__v2_openapi.json index 479115be9f0..bfae50be544 100644 --- a/api/openapi-spec/v3/apis__autoscaling__v2_openapi.json +++ b/api/openapi-spec/v3/apis__autoscaling__v2_openapi.json @@ -837,7 +837,7 @@ "type": "object" }, "io.k8s.apimachinery.pkg.api.resource.Quantity": { - "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", "oneOf": [ { "type": "string" diff --git a/api/openapi-spec/v3/apis__autoscaling__v2beta1_openapi.json b/api/openapi-spec/v3/apis__autoscaling__v2beta1_openapi.json index 7f338f11aa1..23e92285b78 100644 --- a/api/openapi-spec/v3/apis__autoscaling__v2beta1_openapi.json +++ b/api/openapi-spec/v3/apis__autoscaling__v2beta1_openapi.json @@ -731,7 +731,7 @@ "type": "object" }, "io.k8s.apimachinery.pkg.api.resource.Quantity": { - "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", "oneOf": [ { "type": "string" diff --git a/api/openapi-spec/v3/apis__autoscaling__v2beta2_openapi.json b/api/openapi-spec/v3/apis__autoscaling__v2beta2_openapi.json index f8caadaeaa2..0e1d5e4876c 100644 --- a/api/openapi-spec/v3/apis__autoscaling__v2beta2_openapi.json +++ b/api/openapi-spec/v3/apis__autoscaling__v2beta2_openapi.json @@ -828,7 +828,7 @@ "type": "object" }, "io.k8s.apimachinery.pkg.api.resource.Quantity": { - "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", "oneOf": [ { "type": "string" diff --git a/api/openapi-spec/v3/apis__batch__v1_openapi.json b/api/openapi-spec/v3/apis__batch__v1_openapi.json index 27c5ad7237d..289bb415c68 100644 --- a/api/openapi-spec/v3/apis__batch__v1_openapi.json +++ b/api/openapi-spec/v3/apis__batch__v1_openapi.json @@ -3895,7 +3895,7 @@ "type": "object" }, "io.k8s.apimachinery.pkg.api.resource.Quantity": { - "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", "oneOf": [ { "type": "string" diff --git a/api/openapi-spec/v3/apis__batch__v1beta1_openapi.json b/api/openapi-spec/v3/apis__batch__v1beta1_openapi.json index c85edca20fc..9e801bc48a4 100644 --- a/api/openapi-spec/v3/apis__batch__v1beta1_openapi.json +++ b/api/openapi-spec/v3/apis__batch__v1beta1_openapi.json @@ -3663,7 +3663,7 @@ "type": "object" }, "io.k8s.apimachinery.pkg.api.resource.Quantity": { - "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", "oneOf": [ { "type": "string" diff --git a/api/openapi-spec/v3/apis__node.k8s.io__v1_openapi.json b/api/openapi-spec/v3/apis__node.k8s.io__v1_openapi.json index ba8e865e35c..8ca09a58327 100644 --- a/api/openapi-spec/v3/apis__node.k8s.io__v1_openapi.json +++ b/api/openapi-spec/v3/apis__node.k8s.io__v1_openapi.json @@ -174,7 +174,7 @@ "type": "object" }, "io.k8s.apimachinery.pkg.api.resource.Quantity": { - "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", "oneOf": [ { "type": "string" diff --git a/api/openapi-spec/v3/apis__node.k8s.io__v1beta1_openapi.json b/api/openapi-spec/v3/apis__node.k8s.io__v1beta1_openapi.json index f006c8d12e3..ec54c287a0a 100644 --- a/api/openapi-spec/v3/apis__node.k8s.io__v1beta1_openapi.json +++ b/api/openapi-spec/v3/apis__node.k8s.io__v1beta1_openapi.json @@ -174,7 +174,7 @@ "type": "object" }, "io.k8s.apimachinery.pkg.api.resource.Quantity": { - "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", "oneOf": [ { "type": "string" diff --git a/api/openapi-spec/v3/apis__storage.k8s.io__v1_openapi.json b/api/openapi-spec/v3/apis__storage.k8s.io__v1_openapi.json index c3eab156086..296f04d87b0 100644 --- a/api/openapi-spec/v3/apis__storage.k8s.io__v1_openapi.json +++ b/api/openapi-spec/v3/apis__storage.k8s.io__v1_openapi.json @@ -1921,7 +1921,7 @@ "type": "object" }, "io.k8s.apimachinery.pkg.api.resource.Quantity": { - "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", "oneOf": [ { "type": "string" diff --git a/api/openapi-spec/v3/apis__storage.k8s.io__v1beta1_openapi.json b/api/openapi-spec/v3/apis__storage.k8s.io__v1beta1_openapi.json index 1480cad1199..45a55efb175 100644 --- a/api/openapi-spec/v3/apis__storage.k8s.io__v1beta1_openapi.json +++ b/api/openapi-spec/v3/apis__storage.k8s.io__v1beta1_openapi.json @@ -113,7 +113,7 @@ ] }, "io.k8s.apimachinery.pkg.api.resource.Quantity": { - "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + "description": "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", "oneOf": [ { "type": "string" diff --git a/pkg/generated/openapi/zz_generated.openapi.go b/pkg/generated/openapi/zz_generated.openapi.go index 6d62ddda210..d89f760f312 100644 --- a/pkg/generated/openapi/zz_generated.openapi.go +++ b/pkg/generated/openapi/zz_generated.openapi.go @@ -43707,7 +43707,7 @@ func schema_apimachinery_pkg_api_resource_Quantity(ref common.ReferenceCallback) return common.EmbedOpenAPIDefinitionIntoV2Extension(common.OpenAPIDefinition{ Schema: spec.Schema{ SchemaProps: spec.SchemaProps{ - Description: "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + Description: "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", OneOf: common.GenerateOpenAPIV3OneOfSchema(resource.Quantity{}.OpenAPIV3OneOfTypes()), Format: resource.Quantity{}.OpenAPISchemaFormat(), }, @@ -43715,7 +43715,7 @@ func schema_apimachinery_pkg_api_resource_Quantity(ref common.ReferenceCallback) }, common.OpenAPIDefinition{ Schema: spec.Schema{ SchemaProps: spec.SchemaProps{ - Description: "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" \n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n a. No precision is lost\n b. No fractional digits will be emitted\n c. The exponent (or suffix) is as large as possible.\nThe sign will be omitted unless the number is negative.\n\nExamples:\n 1.5 will be serialized as \"1500m\"\n 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", + Description: "Quantity is a fixed-point representation of a number. It provides convenient marshaling/unmarshaling in JSON and YAML, in addition to String() and AsInt64() accessors.\n\nThe serialization format is:\n\n``` ::= \n (Note that may be empty, from the \"\" case in .)\n ::= 0 | 1 | ... | 9 ::= | ::= | . | . | . ::= \"+\" | \"-\" ::= | ::= | | ::= Ki | Mi | Gi | Ti | Pi | Ei\n (International System of units; See: http://physics.nist.gov/cuu/Units/binary.html)\n ::= m | \"\" | k | M | G | T | P | E\n (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.)\n ::= \"e\" | \"E\" ```\n\nNo matter which of the three exponent forms is used, no quantity may represent a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal places. Numbers larger or more precise will be capped or rounded up. (E.g.: 0.1m will rounded up to 1m.) This may be extended in the future if we require larger or smaller quantities.\n\nWhen a Quantity is parsed from a string, it will remember the type of suffix it had, and will use the same type again when it is serialized.\n\nBefore serializing, Quantity will be put in \"canonical form\". This means that Exponent/suffix will be adjusted up or down (with a corresponding increase or decrease in Mantissa) such that:\n\n- No precision is lost - No fractional digits will be emitted - The exponent (or suffix) is as large as possible.\n\nThe sign will be omitted unless the number is negative.\n\nExamples:\n\n- 1.5 will be serialized as \"1500m\" - 1.5Gi will be serialized as \"1536Mi\"\n\nNote that the quantity will NEVER be internally represented by a floating point number. That is the whole point of this exercise.\n\nNon-canonical values will still parse as long as they are well formed, but will be re-emitted in their canonical form. (So always use canonical form, or don't diff.)\n\nThis format is intended to make it difficult to use these numbers without writing some sort of special handling code in the hopes that that will cause implementors to also use a fixed point implementation.", Type: resource.Quantity{}.OpenAPISchemaType(), Format: resource.Quantity{}.OpenAPISchemaFormat(), }, diff --git a/staging/src/k8s.io/apimachinery/pkg/api/resource/generated.proto b/staging/src/k8s.io/apimachinery/pkg/api/resource/generated.proto index 79abc0ff5e7..aa9d7d95e76 100644 --- a/staging/src/k8s.io/apimachinery/pkg/api/resource/generated.proto +++ b/staging/src/k8s.io/apimachinery/pkg/api/resource/generated.proto @@ -30,6 +30,7 @@ option go_package = "k8s.io/apimachinery/pkg/api/resource"; // // The serialization format is: // +// ``` // ::= // (Note that may be empty, from the "" case in .) // ::= 0 | 1 | ... | 9 @@ -43,6 +44,7 @@ option go_package = "k8s.io/apimachinery/pkg/api/resource"; // ::= m | "" | k | M | G | T | P | E // (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.) // ::= "e" | "E" +// ``` // // No matter which of the three exponent forms is used, no quantity may represent // a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal @@ -56,14 +58,17 @@ option go_package = "k8s.io/apimachinery/pkg/api/resource"; // Before serializing, Quantity will be put in "canonical form". // This means that Exponent/suffix will be adjusted up or down (with a // corresponding increase or decrease in Mantissa) such that: -// a. No precision is lost -// b. No fractional digits will be emitted -// c. The exponent (or suffix) is as large as possible. +// +// - No precision is lost +// - No fractional digits will be emitted +// - The exponent (or suffix) is as large as possible. +// // The sign will be omitted unless the number is negative. // // Examples: -// 1.5 will be serialized as "1500m" -// 1.5Gi will be serialized as "1536Mi" +// +// - 1.5 will be serialized as "1500m" +// - 1.5Gi will be serialized as "1536Mi" // // Note that the quantity will NEVER be internally represented by a // floating point number. That is the whole point of this exercise. diff --git a/staging/src/k8s.io/apimachinery/pkg/api/resource/quantity.go b/staging/src/k8s.io/apimachinery/pkg/api/resource/quantity.go index 1ca31d8caf5..158b6a6429d 100644 --- a/staging/src/k8s.io/apimachinery/pkg/api/resource/quantity.go +++ b/staging/src/k8s.io/apimachinery/pkg/api/resource/quantity.go @@ -34,6 +34,7 @@ import ( // // The serialization format is: // +// ``` // ::= // (Note that may be empty, from the "" case in .) // ::= 0 | 1 | ... | 9 @@ -47,6 +48,7 @@ import ( // ::= m | "" | k | M | G | T | P | E // (Note that 1024 = 1Ki but 1000 = 1k; I didn't choose the capitalization.) // ::= "e" | "E" +// ``` // // No matter which of the three exponent forms is used, no quantity may represent // a number greater than 2^63-1 in magnitude, nor may it have more than 3 decimal @@ -60,14 +62,17 @@ import ( // Before serializing, Quantity will be put in "canonical form". // This means that Exponent/suffix will be adjusted up or down (with a // corresponding increase or decrease in Mantissa) such that: -// a. No precision is lost -// b. No fractional digits will be emitted -// c. The exponent (or suffix) is as large as possible. +// +// - No precision is lost +// - No fractional digits will be emitted +// - The exponent (or suffix) is as large as possible. +// // The sign will be omitted unless the number is negative. // // Examples: -// 1.5 will be serialized as "1500m" -// 1.5Gi will be serialized as "1536Mi" +// +// - 1.5 will be serialized as "1500m" +// - 1.5Gi will be serialized as "1536Mi" // // Note that the quantity will NEVER be internally represented by a // floating point number. That is the whole point of this exercise.