Move deps from _workspace/ to vendor/

godep restore
pushd $GOPATH/src/github.com/appc/spec
git co master
popd
go get go4.org/errorutil
rm -rf Godeps
godep save ./...
git add vendor
git add -f $(git ls-files --other vendor/)
git co -- Godeps/LICENSES Godeps/.license_file_state Godeps/OWNERS

vendor/github.com/garyburd/redigo/internal/commandinfo.go

@@ -0,0 +1,45 @@
+// Copyright 2014 Gary Burd
+//
+// Licensed under the Apache License, Version 2.0 (the "License"): you may
+// not use this file except in compliance with the License. You may obtain
+// a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+// License for the specific language governing permissions and limitations
+// under the License.
+
+package internal
+
+import (
+	"strings"
+)
+
+const (
+	WatchState = 1 << iota
+	MultiState
+	SubscribeState
+	MonitorState
+)
+
+type CommandInfo struct {
+	Set, Clear int
+}
+
+var commandInfos = map[string]CommandInfo{
+	"WATCH":      {Set: WatchState},
+	"UNWATCH":    {Clear: WatchState},
+	"MULTI":      {Set: MultiState},
+	"EXEC":       {Clear: WatchState | MultiState},
+	"DISCARD":    {Clear: WatchState | MultiState},
+	"PSUBSCRIBE": {Set: SubscribeState},
+	"SUBSCRIBE":  {Set: SubscribeState},
+	"MONITOR":    {Set: MonitorState},
+}
+
+func LookupCommandInfo(commandName string) CommandInfo {
+	return commandInfos[strings.ToUpper(commandName)]
+}

vendor/github.com/garyburd/redigo/internal/redistest/testdb.go

@@ -0,0 +1,65 @@
+// Copyright 2014 Gary Burd
+//
+// Licensed under the Apache License, Version 2.0 (the "License"): you may
+// not use this file except in compliance with the License. You may obtain
+// a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+// License for the specific language governing permissions and limitations
+// under the License.
+
+// Package redistest contains utilities for writing Redigo tests.
+package redistest
+
+import (
+	"errors"
+	"time"
+
+	"github.com/garyburd/redigo/redis"
+)
+
+type testConn struct {
+	redis.Conn
+}
+
+func (t testConn) Close() error {
+	_, err := t.Conn.Do("SELECT", "9")
+	if err != nil {
+		return nil
+	}
+	_, err = t.Conn.Do("FLUSHDB")
+	if err != nil {
+		return err
+	}
+	return t.Conn.Close()
+}
+
+// Dial dials the local Redis server and selects database 9. To prevent
+// stomping on real data, DialTestDB fails if database 9 contains data. The
+// returned connection flushes database 9 on close.
+func Dial() (redis.Conn, error) {
+	c, err := redis.DialTimeout("tcp", ":6379", 0, 1*time.Second, 1*time.Second)
+	if err != nil {
+		return nil, err
+	}
+
+	_, err = c.Do("SELECT", "9")
+	if err != nil {
+		return nil, err
+	}
+
+	n, err := redis.Int(c.Do("DBSIZE"))
+	if err != nil {
+		return nil, err
+	}
+
+	if n != 0 {
+		return nil, errors.New("database #9 is not empty, test can not continue")
+	}
+
+	return testConn{c}, nil
+}

vendor/github.com/garyburd/redigo/redis/conn.go

@@ -0,0 +1,455 @@
+// Copyright 2012 Gary Burd
+//
+// Licensed under the Apache License, Version 2.0 (the "License"): you may
+// not use this file except in compliance with the License. You may obtain
+// a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+// License for the specific language governing permissions and limitations
+// under the License.
+
+package redis
+
+import (
+	"bufio"
+	"bytes"
+	"errors"
+	"fmt"
+	"io"
+	"net"
+	"strconv"
+	"sync"
+	"time"
+)
+
+// conn is the low-level implementation of Conn
+type conn struct {
+
+	// Shared
+	mu      sync.Mutex
+	pending int
+	err     error
+	conn    net.Conn
+
+	// Read
+	readTimeout time.Duration
+	br          *bufio.Reader
+
+	// Write
+	writeTimeout time.Duration
+	bw           *bufio.Writer
+
+	// Scratch space for formatting argument length.
+	// '*' or '$', length, "\r\n"
+	lenScratch [32]byte
+
+	// Scratch space for formatting integers and floats.
+	numScratch [40]byte
+}
+
+// Dial connects to the Redis server at the given network and address.
+func Dial(network, address string) (Conn, error) {
+	dialer := xDialer{}
+	return dialer.Dial(network, address)
+}
+
+// DialTimeout acts like Dial but takes timeouts for establishing the
+// connection to the server, writing a command and reading a reply.
+func DialTimeout(network, address string, connectTimeout, readTimeout, writeTimeout time.Duration) (Conn, error) {
+	netDialer := net.Dialer{Timeout: connectTimeout}
+	dialer := xDialer{
+		NetDial:      netDialer.Dial,
+		ReadTimeout:  readTimeout,
+		WriteTimeout: writeTimeout,
+	}
+	return dialer.Dial(network, address)
+}
+
+// A Dialer specifies options for connecting to a Redis server.
+type xDialer struct {
+	// NetDial specifies the dial function for creating TCP connections. If
+	// NetDial is nil, then net.Dial is used.
+	NetDial func(network, addr string) (net.Conn, error)
+
+	// ReadTimeout specifies the timeout for reading a single command
+	// reply. If ReadTimeout is zero, then no timeout is used.
+	ReadTimeout time.Duration
+
+	// WriteTimeout specifies the timeout for writing a single command.  If
+	// WriteTimeout is zero, then no timeout is used.
+	WriteTimeout time.Duration
+}
+
+// Dial connects to the Redis server at address on the named network.
+func (d *xDialer) Dial(network, address string) (Conn, error) {
+	dial := d.NetDial
+	if dial == nil {
+		dial = net.Dial
+	}
+	netConn, err := dial(network, address)
+	if err != nil {
+		return nil, err
+	}
+	return &conn{
+		conn:         netConn,
+		bw:           bufio.NewWriter(netConn),
+		br:           bufio.NewReader(netConn),
+		readTimeout:  d.ReadTimeout,
+		writeTimeout: d.WriteTimeout,
+	}, nil
+}
+
+// NewConn returns a new Redigo connection for the given net connection.
+func NewConn(netConn net.Conn, readTimeout, writeTimeout time.Duration) Conn {
+	return &conn{
+		conn:         netConn,
+		bw:           bufio.NewWriter(netConn),
+		br:           bufio.NewReader(netConn),
+		readTimeout:  readTimeout,
+		writeTimeout: writeTimeout,
+	}
+}
+
+func (c *conn) Close() error {
+	c.mu.Lock()
+	err := c.err
+	if c.err == nil {
+		c.err = errors.New("redigo: closed")
+		err = c.conn.Close()
+	}
+	c.mu.Unlock()
+	return err
+}
+
+func (c *conn) fatal(err error) error {
+	c.mu.Lock()
+	if c.err == nil {
+		c.err = err
+		// Close connection to force errors on subsequent calls and to unblock
+		// other reader or writer.
+		c.conn.Close()
+	}
+	c.mu.Unlock()
+	return err
+}
+
+func (c *conn) Err() error {
+	c.mu.Lock()
+	err := c.err
+	c.mu.Unlock()
+	return err
+}
+
+func (c *conn) writeLen(prefix byte, n int) error {
+	c.lenScratch[len(c.lenScratch)-1] = '\n'
+	c.lenScratch[len(c.lenScratch)-2] = '\r'
+	i := len(c.lenScratch) - 3
+	for {
+		c.lenScratch[i] = byte('0' + n%10)
+		i -= 1
+		n = n / 10
+		if n == 0 {
+			break
+		}
+	}
+	c.lenScratch[i] = prefix
+	_, err := c.bw.Write(c.lenScratch[i:])
+	return err
+}
+
+func (c *conn) writeString(s string) error {
+	c.writeLen('$', len(s))
+	c.bw.WriteString(s)
+	_, err := c.bw.WriteString("\r\n")
+	return err
+}
+
+func (c *conn) writeBytes(p []byte) error {
+	c.writeLen('$', len(p))
+	c.bw.Write(p)
+	_, err := c.bw.WriteString("\r\n")
+	return err
+}
+
+func (c *conn) writeInt64(n int64) error {
+	return c.writeBytes(strconv.AppendInt(c.numScratch[:0], n, 10))
+}
+
+func (c *conn) writeFloat64(n float64) error {
+	return c.writeBytes(strconv.AppendFloat(c.numScratch[:0], n, 'g', -1, 64))
+}
+
+func (c *conn) writeCommand(cmd string, args []interface{}) (err error) {
+	c.writeLen('*', 1+len(args))
+	err = c.writeString(cmd)
+	for _, arg := range args {
+		if err != nil {
+			break
+		}
+		switch arg := arg.(type) {
+		case string:
+			err = c.writeString(arg)
+		case []byte:
+			err = c.writeBytes(arg)
+		case int:
+			err = c.writeInt64(int64(arg))
+		case int64:
+			err = c.writeInt64(arg)
+		case float64:
+			err = c.writeFloat64(arg)
+		case bool:
+			if arg {
+				err = c.writeString("1")
+			} else {
+				err = c.writeString("0")
+			}
+		case nil:
+			err = c.writeString("")
+		default:
+			var buf bytes.Buffer
+			fmt.Fprint(&buf, arg)
+			err = c.writeBytes(buf.Bytes())
+		}
+	}
+	return err
+}
+
+type protocolError string
+
+func (pe protocolError) Error() string {
+	return fmt.Sprintf("redigo: %s (possible server error or unsupported concurrent read by application)", string(pe))
+}
+
+func (c *conn) readLine() ([]byte, error) {
+	p, err := c.br.ReadSlice('\n')
+	if err == bufio.ErrBufferFull {
+		return nil, protocolError("long response line")
+	}
+	if err != nil {
+		return nil, err
+	}
+	i := len(p) - 2
+	if i < 0 || p[i] != '\r' {
+		return nil, protocolError("bad response line terminator")
+	}
+	return p[:i], nil
+}
+
+// parseLen parses bulk string and array lengths.
+func parseLen(p []byte) (int, error) {
+	if len(p) == 0 {
+		return -1, protocolError("malformed length")
+	}
+
+	if p[0] == '-' && len(p) == 2 && p[1] == '1' {
+		// handle $-1 and $-1 null replies.
+		return -1, nil
+	}
+
+	var n int
+	for _, b := range p {
+		n *= 10
+		if b < '0' || b > '9' {
+			return -1, protocolError("illegal bytes in length")
+		}
+		n += int(b - '0')
+	}
+
+	return n, nil
+}
+
+// parseInt parses an integer reply.
+func parseInt(p []byte) (interface{}, error) {
+	if len(p) == 0 {
+		return 0, protocolError("malformed integer")
+	}
+
+	var negate bool
+	if p[0] == '-' {
+		negate = true
+		p = p[1:]
+		if len(p) == 0 {
+			return 0, protocolError("malformed integer")
+		}
+	}
+
+	var n int64
+	for _, b := range p {
+		n *= 10
+		if b < '0' || b > '9' {
+			return 0, protocolError("illegal bytes in length")
+		}
+		n += int64(b - '0')
+	}
+
+	if negate {
+		n = -n
+	}
+	return n, nil
+}
+
+var (
+	okReply   interface{} = "OK"
+	pongReply interface{} = "PONG"
+)
+
+func (c *conn) readReply() (interface{}, error) {
+	line, err := c.readLine()
+	if err != nil {
+		return nil, err
+	}
+	if len(line) == 0 {
+		return nil, protocolError("short response line")
+	}
+	switch line[0] {
+	case '+':
+		switch {
+		case len(line) == 3 && line[1] == 'O' && line[2] == 'K':
+			// Avoid allocation for frequent "+OK" response.
+			return okReply, nil
+		case len(line) == 5 && line[1] == 'P' && line[2] == 'O' && line[3] == 'N' && line[4] == 'G':
+			// Avoid allocation in PING command benchmarks :)
+			return pongReply, nil
+		default:
+			return string(line[1:]), nil
+		}
+	case '-':
+		return Error(string(line[1:])), nil
+	case ':':
+		return parseInt(line[1:])
+	case '$':
+		n, err := parseLen(line[1:])
+		if n < 0 || err != nil {
+			return nil, err
+		}
+		p := make([]byte, n)
+		_, err = io.ReadFull(c.br, p)
+		if err != nil {
+			return nil, err
+		}
+		if line, err := c.readLine(); err != nil {
+			return nil, err
+		} else if len(line) != 0 {
+			return nil, protocolError("bad bulk string format")
+		}
+		return p, nil
+	case '*':
+		n, err := parseLen(line[1:])
+		if n < 0 || err != nil {
+			return nil, err
+		}
+		r := make([]interface{}, n)
+		for i := range r {
+			r[i], err = c.readReply()
+			if err != nil {
+				return nil, err
+			}
+		}
+		return r, nil
+	}
+	return nil, protocolError("unexpected response line")
+}
+
+func (c *conn) Send(cmd string, args ...interface{}) error {
+	c.mu.Lock()
+	c.pending += 1
+	c.mu.Unlock()
+	if c.writeTimeout != 0 {
+		c.conn.SetWriteDeadline(time.Now().Add(c.writeTimeout))
+	}
+	if err := c.writeCommand(cmd, args); err != nil {
+		return c.fatal(err)
+	}
+	return nil
+}
+
+func (c *conn) Flush() error {
+	if c.writeTimeout != 0 {
+		c.conn.SetWriteDeadline(time.Now().Add(c.writeTimeout))
+	}
+	if err := c.bw.Flush(); err != nil {
+		return c.fatal(err)
+	}
+	return nil
+}
+
+func (c *conn) Receive() (reply interface{}, err error) {
+	if c.readTimeout != 0 {
+		c.conn.SetReadDeadline(time.Now().Add(c.readTimeout))
+	}
+	if reply, err = c.readReply(); err != nil {
+		return nil, c.fatal(err)
+	}
+	// When using pub/sub, the number of receives can be greater than the
+	// number of sends. To enable normal use of the connection after
+	// unsubscribing from all channels, we do not decrement pending to a
+	// negative value.
+	//
+	// The pending field is decremented after the reply is read to handle the
+	// case where Receive is called before Send.
+	c.mu.Lock()
+	if c.pending > 0 {
+		c.pending -= 1
+	}
+	c.mu.Unlock()
+	if err, ok := reply.(Error); ok {
+		return nil, err
+	}
+	return
+}
+
+func (c *conn) Do(cmd string, args ...interface{}) (interface{}, error) {
+	c.mu.Lock()
+	pending := c.pending
+	c.pending = 0
+	c.mu.Unlock()
+
+	if cmd == "" && pending == 0 {
+		return nil, nil
+	}
+
+	if c.writeTimeout != 0 {
+		c.conn.SetWriteDeadline(time.Now().Add(c.writeTimeout))
+	}
+
+	if cmd != "" {
+		c.writeCommand(cmd, args)
+	}
+
+	if err := c.bw.Flush(); err != nil {
+		return nil, c.fatal(err)
+	}
+
+	if c.readTimeout != 0 {
+		c.conn.SetReadDeadline(time.Now().Add(c.readTimeout))
+	}
+
+	if cmd == "" {
+		reply := make([]interface{}, pending)
+		for i := range reply {
+			r, e := c.readReply()
+			if e != nil {
+				return nil, c.fatal(e)
+			}
+			reply[i] = r
+		}
+		return reply, nil
+	}
+
+	var err error
+	var reply interface{}
+	for i := 0; i <= pending; i++ {
+		var e error
+		if reply, e = c.readReply(); e != nil {
+			return nil, c.fatal(e)
+		}
+		if e, ok := reply.(Error); ok && err == nil {
+			err = e
+		}
+	}
+	return reply, err
+}

vendor/github.com/garyburd/redigo/redis/doc.go

@@ -0,0 +1,169 @@
+// Copyright 2012 Gary Burd
+//
+// Licensed under the Apache License, Version 2.0 (the "License"): you may
+// not use this file except in compliance with the License. You may obtain
+// a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+// License for the specific language governing permissions and limitations
+// under the License.
+
+// Package redis is a client for the Redis database.
+//
+// The Redigo FAQ (https://github.com/garyburd/redigo/wiki/FAQ) contains more
+// documentation about this package.
+//
+// Connections
+//
+// The Conn interface is the primary interface for working with Redis.
+// Applications create connections by calling the Dial, DialWithTimeout or
+// NewConn functions. In the future, functions will be added for creating
+// sharded and other types of connections.
+//
+// The application must call the connection Close method when the application
+// is done with the connection.
+//
+// Executing Commands
+//
+// The Conn interface has a generic method for executing Redis commands:
+//
+//  Do(commandName string, args ...interface{}) (reply interface{}, err error)
+//
+// The Redis command reference (http://redis.io/commands) lists the available
+// commands. An example of using the Redis APPEND command is:
+//
+//  n, err := conn.Do("APPEND", "key", "value")
+//
+// The Do method converts command arguments to binary strings for transmission
+// to the server as follows:
+//
+//  Go Type                 Conversion
+//  []byte                  Sent as is
+//  string                  Sent as is
+//  int, int64              strconv.FormatInt(v)
+//  float64                 strconv.FormatFloat(v, 'g', -1, 64)
+//  bool                    true -> "1", false -> "0"
+//  nil                     ""
+//  all other types         fmt.Print(v)
+//
+// Redis command reply types are represented using the following Go types:
+//
+//  Redis type              Go type
+//  error                   redis.Error
+//  integer                 int64
+//  simple string           string
+//  bulk string             []byte or nil if value not present.
+//  array                   []interface{} or nil if value not present.
+//
+// Use type assertions or the reply helper functions to convert from
+// interface{} to the specific Go type for the command result.
+//
+// Pipelining
+//
+// Connections support pipelining using the Send, Flush and Receive methods.
+//
+//  Send(commandName string, args ...interface{}) error
+//  Flush() error
+//  Receive() (reply interface{}, err error)
+//
+// Send writes the command to the connection's output buffer. Flush flushes the
+// connection's output buffer to the server. Receive reads a single reply from
+// the server. The following example shows a simple pipeline.
+//
+//  c.Send("SET", "foo", "bar")
+//  c.Send("GET", "foo")
+//  c.Flush()
+//  c.Receive() // reply from SET
+//  v, err = c.Receive() // reply from GET
+//
+// The Do method combines the functionality of the Send, Flush and Receive
+// methods. The Do method starts by writing the command and flushing the output
+// buffer. Next, the Do method receives all pending replies including the reply
+// for the command just sent by Do. If any of the received replies is an error,
+// then Do returns the error. If there are no errors, then Do returns the last
+// reply. If the command argument to the Do method is "", then the Do method
+// will flush the output buffer and receive pending replies without sending a
+// command.
+//
+// Use the Send and Do methods to implement pipelined transactions.
+//
+//  c.Send("MULTI")
+//  c.Send("INCR", "foo")
+//  c.Send("INCR", "bar")
+//  r, err := c.Do("EXEC")
+//  fmt.Println(r) // prints [1, 1]
+//
+// Concurrency
+//
+// Connections do not support concurrent calls to the write methods (Send,
+// Flush) or concurrent calls to the read method (Receive). Connections do
+// allow a concurrent reader and writer.
+//
+// Because the Do method combines the functionality of Send, Flush and Receive,
+// the Do method cannot be called concurrently with the other methods.
+//
+// For full concurrent access to Redis, use the thread-safe Pool to get and
+// release connections from within a goroutine.
+//
+// Publish and Subscribe
+//
+// Use the Send, Flush and Receive methods to implement Pub/Sub subscribers.
+//
+//  c.Send("SUBSCRIBE", "example")
+//  c.Flush()
+//  for {
+//      reply, err := c.Receive()
+//      if err != nil {
+//          return err
+//      }
+//      // process pushed message
+//  }
+//
+// The PubSubConn type wraps a Conn with convenience methods for implementing
+// subscribers. The Subscribe, PSubscribe, Unsubscribe and PUnsubscribe methods
+// send and flush a subscription management command. The receive method
+// converts a pushed message to convenient types for use in a type switch.
+//
+//  psc := redis.PubSubConn{c}
+//  psc.Subscribe("example")
+//  for {
+//      switch v := psc.Receive().(type) {
+//      case redis.Message:
+//          fmt.Printf("%s: message: %s\n", v.Channel, v.Data)
+//      case redis.Subscription:
+//          fmt.Printf("%s: %s %d\n", v.Channel, v.Kind, v.Count)
+//      case error:
+//          return v
+//      }
+//  }
+//
+// Reply Helpers
+//
+// The Bool, Int, Bytes, String, Strings and Values functions convert a reply
+// to a value of a specific type. To allow convenient wrapping of calls to the
+// connection Do and Receive methods, the functions take a second argument of
+// type error.  If the error is non-nil, then the helper function returns the
+// error. If the error is nil, the function converts the reply to the specified
+// type:
+//
+//  exists, err := redis.Bool(c.Do("EXISTS", "foo"))
+//  if err != nil {
+//      // handle error return from c.Do or type conversion error.
+//  }
+//
+// The Scan function converts elements of a array reply to Go types:
+//
+//  var value1 int
+//  var value2 string
+//  reply, err := redis.Values(c.Do("MGET", "key1", "key2"))
+//  if err != nil {
+//      // handle error
+//  }
+//   if _, err := redis.Scan(reply, &value1, &value2); err != nil {
+//      // handle error
+//  }
+package redis

vendor/github.com/garyburd/redigo/redis/log.go

@@ -0,0 +1,117 @@
+// Copyright 2012 Gary Burd
+//
+// Licensed under the Apache License, Version 2.0 (the "License"): you may
+// not use this file except in compliance with the License. You may obtain
+// a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+// License for the specific language governing permissions and limitations
+// under the License.
+
+package redis
+
+import (
+	"bytes"
+	"fmt"
+	"log"
+)
+
+// NewLoggingConn returns a logging wrapper around a connection.
+func NewLoggingConn(conn Conn, logger *log.Logger, prefix string) Conn {
+	if prefix != "" {
+		prefix = prefix + "."
+	}
+	return &loggingConn{conn, logger, prefix}
+}
+
+type loggingConn struct {
+	Conn
+	logger *log.Logger
+	prefix string
+}
+
+func (c *loggingConn) Close() error {
+	err := c.Conn.Close()
+	var buf bytes.Buffer
+	fmt.Fprintf(&buf, "%sClose() -> (%v)", c.prefix, err)
+	c.logger.Output(2, buf.String())
+	return err
+}
+
+func (c *loggingConn) printValue(buf *bytes.Buffer, v interface{}) {
+	const chop = 32
+	switch v := v.(type) {
+	case []byte:
+		if len(v) > chop {
+			fmt.Fprintf(buf, "%q...", v[:chop])
+		} else {
+			fmt.Fprintf(buf, "%q", v)
+		}
+	case string:
+		if len(v) > chop {
+			fmt.Fprintf(buf, "%q...", v[:chop])
+		} else {
+			fmt.Fprintf(buf, "%q", v)
+		}
+	case []interface{}:
+		if len(v) == 0 {
+			buf.WriteString("[]")
+		} else {
+			sep := "["
+			fin := "]"
+			if len(v) > chop {
+				v = v[:chop]
+				fin = "...]"
+			}
+			for _, vv := range v {
+				buf.WriteString(sep)
+				c.printValue(buf, vv)
+				sep = ", "
+			}
+			buf.WriteString(fin)
+		}
+	default:
+		fmt.Fprint(buf, v)
+	}
+}
+
+func (c *loggingConn) print(method, commandName string, args []interface{}, reply interface{}, err error) {
+	var buf bytes.Buffer
+	fmt.Fprintf(&buf, "%s%s(", c.prefix, method)
+	if method != "Receive" {
+		buf.WriteString(commandName)
+		for _, arg := range args {
+			buf.WriteString(", ")
+			c.printValue(&buf, arg)
+		}
+	}
+	buf.WriteString(") -> (")
+	if method != "Send" {
+		c.printValue(&buf, reply)
+		buf.WriteString(", ")
+	}
+	fmt.Fprintf(&buf, "%v)", err)
+	c.logger.Output(3, buf.String())
+}
+
+func (c *loggingConn) Do(commandName string, args ...interface{}) (interface{}, error) {
+	reply, err := c.Conn.Do(commandName, args...)
+	c.print("Do", commandName, args, reply, err)
+	return reply, err
+}
+
+func (c *loggingConn) Send(commandName string, args ...interface{}) error {
+	err := c.Conn.Send(commandName, args...)
+	c.print("Send", commandName, args, nil, err)
+	return err
+}
+
+func (c *loggingConn) Receive() (interface{}, error) {
+	reply, err := c.Conn.Receive()
+	c.print("Receive", "", nil, reply, err)
+	return reply, err
+}

vendor/github.com/garyburd/redigo/redis/pool.go

@@ -0,0 +1,389 @@
+// Copyright 2012 Gary Burd
+//
+// Licensed under the Apache License, Version 2.0 (the "License"): you may
+// not use this file except in compliance with the License. You may obtain
+// a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+// License for the specific language governing permissions and limitations
+// under the License.
+
+package redis
+
+import (
+	"bytes"
+	"container/list"
+	"crypto/rand"
+	"crypto/sha1"
+	"errors"
+	"io"
+	"strconv"
+	"sync"
+	"time"
+
+	"github.com/garyburd/redigo/internal"
+)
+
+var nowFunc = time.Now // for testing
+
+// ErrPoolExhausted is returned from a pool connection method (Do, Send,
+// Receive, Flush, Err) when the maximum number of database connections in the
+// pool has been reached.
+var ErrPoolExhausted = errors.New("redigo: connection pool exhausted")
+
+var (
+	errPoolClosed = errors.New("redigo: connection pool closed")
+	errConnClosed = errors.New("redigo: connection closed")
+)
+
+// Pool maintains a pool of connections. The application calls the Get method
+// to get a connection from the pool and the connection's Close method to
+// return the connection's resources to the pool.
+//
+// The following example shows how to use a pool in a web application. The
+// application creates a pool at application startup and makes it available to
+// request handlers using a global variable.
+//
+//  func newPool(server, password string) *redis.Pool {
+//      return &redis.Pool{
+//          MaxIdle: 3,
+//          IdleTimeout: 240 * time.Second,
+//          Dial: func () (redis.Conn, error) {
+//              c, err := redis.Dial("tcp", server)
+//              if err != nil {
+//                  return nil, err
+//              }
+//              if _, err := c.Do("AUTH", password); err != nil {
+//                  c.Close()
+//                  return nil, err
+//              }
+//              return c, err
+//          },
+//          TestOnBorrow: func(c redis.Conn, t time.Time) error {
+//              _, err := c.Do("PING")
+//              return err
+//          },
+//      }
+//  }
+//
+//  var (
+//      pool *redis.Pool
+//      redisServer = flag.String("redisServer", ":6379", "")
+//      redisPassword = flag.String("redisPassword", "", "")
+//  )
+//
+//  func main() {
+//      flag.Parse()
+//      pool = newPool(*redisServer, *redisPassword)
+//      ...
+//  }
+//
+// A request handler gets a connection from the pool and closes the connection
+// when the handler is done:
+//
+//  func serveHome(w http.ResponseWriter, r *http.Request) {
+//      conn := pool.Get()
+//      defer conn.Close()
+//      ....
+//  }
+//
+type Pool struct {
+
+	// Dial is an application supplied function for creating and configuring a
+	// connection
+	Dial func() (Conn, error)
+
+	// TestOnBorrow is an optional application supplied function for checking
+	// the health of an idle connection before the connection is used again by
+	// the application. Argument t is the time that the connection was returned
+	// to the pool. If the function returns an error, then the connection is
+	// closed.
+	TestOnBorrow func(c Conn, t time.Time) error
+
+	// Maximum number of idle connections in the pool.
+	MaxIdle int
+
+	// Maximum number of connections allocated by the pool at a given time.
+	// When zero, there is no limit on the number of connections in the pool.
+	MaxActive int
+
+	// Close connections after remaining idle for this duration. If the value
+	// is zero, then idle connections are not closed. Applications should set
+	// the timeout to a value less than the server's timeout.
+	IdleTimeout time.Duration
+
+	// If Wait is true and the pool is at the MaxIdle limit, then Get() waits
+	// for a connection to be returned to the pool before returning.
+	Wait bool
+
+	// mu protects fields defined below.
+	mu     sync.Mutex
+	cond   *sync.Cond
+	closed bool
+	active int
+
+	// Stack of idleConn with most recently used at the front.
+	idle list.List
+}
+
+type idleConn struct {
+	c Conn
+	t time.Time
+}
+
+// NewPool creates a new pool. This function is deprecated. Applications should
+// initialize the Pool fields directly as shown in example.
+func NewPool(newFn func() (Conn, error), maxIdle int) *Pool {
+	return &Pool{Dial: newFn, MaxIdle: maxIdle}
+}
+
+// Get gets a connection. The application must close the returned connection.
+// This method always returns a valid connection so that applications can defer
+// error handling to the first use of the connection. If there is an error
+// getting an underlying connection, then the connection Err, Do, Send, Flush
+// and Receive methods return that error.
+func (p *Pool) Get() Conn {
+	c, err := p.get()
+	if err != nil {
+		return errorConnection{err}
+	}
+	return &pooledConnection{p: p, c: c}
+}
+
+// ActiveCount returns the number of active connections in the pool.
+func (p *Pool) ActiveCount() int {
+	p.mu.Lock()
+	active := p.active
+	p.mu.Unlock()
+	return active
+}
+
+// Close releases the resources used by the pool.
+func (p *Pool) Close() error {
+	p.mu.Lock()
+	idle := p.idle
+	p.idle.Init()
+	p.closed = true
+	p.active -= idle.Len()
+	if p.cond != nil {
+		p.cond.Broadcast()
+	}
+	p.mu.Unlock()
+	for e := idle.Front(); e != nil; e = e.Next() {
+		e.Value.(idleConn).c.Close()
+	}
+	return nil
+}
+
+// release decrements the active count and signals waiters. The caller must
+// hold p.mu during the call.
+func (p *Pool) release() {
+	p.active -= 1
+	if p.cond != nil {
+		p.cond.Signal()
+	}
+}
+
+// get prunes stale connections and returns a connection from the idle list or
+// creates a new connection.
+func (p *Pool) get() (Conn, error) {
+	p.mu.Lock()
+
+	// Prune stale connections.
+
+	if timeout := p.IdleTimeout; timeout > 0 {
+		for i, n := 0, p.idle.Len(); i < n; i++ {
+			e := p.idle.Back()
+			if e == nil {
+				break
+			}
+			ic := e.Value.(idleConn)
+			if ic.t.Add(timeout).After(nowFunc()) {
+				break
+			}
+			p.idle.Remove(e)
+			p.release()
+			p.mu.Unlock()
+			ic.c.Close()
+			p.mu.Lock()
+		}
+	}
+
+	for {
+
+		// Get idle connection.
+
+		for i, n := 0, p.idle.Len(); i < n; i++ {
+			e := p.idle.Front()
+			if e == nil {
+				break
+			}
+			ic := e.Value.(idleConn)
+			p.idle.Remove(e)
+			test := p.TestOnBorrow
+			p.mu.Unlock()
+			if test == nil || test(ic.c, ic.t) == nil {
+				return ic.c, nil
+			}
+			ic.c.Close()
+			p.mu.Lock()
+			p.release()
+		}
+
+		// Check for pool closed before dialing a new connection.
+
+		if p.closed {
+			p.mu.Unlock()
+			return nil, errors.New("redigo: get on closed pool")
+		}
+
+		// Dial new connection if under limit.
+
+		if p.MaxActive == 0 || p.active < p.MaxActive {
+			dial := p.Dial
+			p.active += 1
+			p.mu.Unlock()
+			c, err := dial()
+			if err != nil {
+				p.mu.Lock()
+				p.release()
+				p.mu.Unlock()
+				c = nil
+			}
+			return c, err
+		}
+
+		if !p.Wait {
+			p.mu.Unlock()
+			return nil, ErrPoolExhausted
+		}
+
+		if p.cond == nil {
+			p.cond = sync.NewCond(&p.mu)
+		}
+		p.cond.Wait()
+	}
+}
+
+func (p *Pool) put(c Conn, forceClose bool) error {
+	err := c.Err()
+	p.mu.Lock()
+	if !p.closed && err == nil && !forceClose {
+		p.idle.PushFront(idleConn{t: nowFunc(), c: c})
+		if p.idle.Len() > p.MaxIdle {
+			c = p.idle.Remove(p.idle.Back()).(idleConn).c
+		} else {
+			c = nil
+		}
+	}
+
+	if c == nil {
+		if p.cond != nil {
+			p.cond.Signal()
+		}
+		p.mu.Unlock()
+		return nil
+	}
+
+	p.release()
+	p.mu.Unlock()
+	return c.Close()
+}
+
+type pooledConnection struct {
+	p     *Pool
+	c     Conn
+	state int
+}
+
+var (
+	sentinel     []byte
+	sentinelOnce sync.Once
+)
+
+func initSentinel() {
+	p := make([]byte, 64)
+	if _, err := rand.Read(p); err == nil {
+		sentinel = p
+	} else {
+		h := sha1.New()
+		io.WriteString(h, "Oops, rand failed. Use time instead.")
+		io.WriteString(h, strconv.FormatInt(time.Now().UnixNano(), 10))
+		sentinel = h.Sum(nil)
+	}
+}
+
+func (pc *pooledConnection) Close() error {
+	c := pc.c
+	if _, ok := c.(errorConnection); ok {
+		return nil
+	}
+	pc.c = errorConnection{errConnClosed}
+
+	if pc.state&internal.MultiState != 0 {
+		c.Send("DISCARD")
+		pc.state &^= (internal.MultiState | internal.WatchState)
+	} else if pc.state&internal.WatchState != 0 {
+		c.Send("UNWATCH")
+		pc.state &^= internal.WatchState
+	}
+	if pc.state&internal.SubscribeState != 0 {
+		c.Send("UNSUBSCRIBE")
+		c.Send("PUNSUBSCRIBE")
+		// To detect the end of the message stream, ask the server to echo
+		// a sentinel value and read until we see that value.
+		sentinelOnce.Do(initSentinel)
+		c.Send("ECHO", sentinel)
+		c.Flush()
+		for {
+			p, err := c.Receive()
+			if err != nil {
+				break
+			}
+			if p, ok := p.([]byte); ok && bytes.Equal(p, sentinel) {
+				pc.state &^= internal.SubscribeState
+				break
+			}
+		}
+	}
+	c.Do("")
+	pc.p.put(c, pc.state != 0)
+	return nil
+}
+
+func (pc *pooledConnection) Err() error {
+	return pc.c.Err()
+}
+
+func (pc *pooledConnection) Do(commandName string, args ...interface{}) (reply interface{}, err error) {
+	ci := internal.LookupCommandInfo(commandName)
+	pc.state = (pc.state | ci.Set) &^ ci.Clear
+	return pc.c.Do(commandName, args...)
+}
+
+func (pc *pooledConnection) Send(commandName string, args ...interface{}) error {
+	ci := internal.LookupCommandInfo(commandName)
+	pc.state = (pc.state | ci.Set) &^ ci.Clear
+	return pc.c.Send(commandName, args...)
+}
+
+func (pc *pooledConnection) Flush() error {
+	return pc.c.Flush()
+}
+
+func (pc *pooledConnection) Receive() (reply interface{}, err error) {
+	return pc.c.Receive()
+}
+
+type errorConnection struct{ err error }
+
+func (ec errorConnection) Do(string, ...interface{}) (interface{}, error) { return nil, ec.err }
+func (ec errorConnection) Send(string, ...interface{}) error              { return ec.err }
+func (ec errorConnection) Err() error                                     { return ec.err }
+func (ec errorConnection) Close() error                                   { return ec.err }
+func (ec errorConnection) Flush() error                                   { return ec.err }
+func (ec errorConnection) Receive() (interface{}, error)                  { return nil, ec.err }

vendor/github.com/garyburd/redigo/redis/pubsub.go

@@ -0,0 +1,129 @@
+// Copyright 2012 Gary Burd
+//
+// Licensed under the Apache License, Version 2.0 (the "License"): you may
+// not use this file except in compliance with the License. You may obtain
+// a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+// License for the specific language governing permissions and limitations
+// under the License.
+
+package redis
+
+import (
+	"errors"
+)
+
+// Subscription represents a subscribe or unsubscribe notification.
+type Subscription struct {
+
+	// Kind is "subscribe", "unsubscribe", "psubscribe" or "punsubscribe"
+	Kind string
+
+	// The channel that was changed.
+	Channel string
+
+	// The current number of subscriptions for connection.
+	Count int
+}
+
+// Message represents a message notification.
+type Message struct {
+
+	// The originating channel.
+	Channel string
+
+	// The message data.
+	Data []byte
+}
+
+// PMessage represents a pmessage notification.
+type PMessage struct {
+
+	// The matched pattern.
+	Pattern string
+
+	// The originating channel.
+	Channel string
+
+	// The message data.
+	Data []byte
+}
+
+// PubSubConn wraps a Conn with convenience methods for subscribers.
+type PubSubConn struct {
+	Conn Conn
+}
+
+// Close closes the connection.
+func (c PubSubConn) Close() error {
+	return c.Conn.Close()
+}
+
+// Subscribe subscribes the connection to the specified channels.
+func (c PubSubConn) Subscribe(channel ...interface{}) error {
+	c.Conn.Send("SUBSCRIBE", channel...)
+	return c.Conn.Flush()
+}
+
+// PSubscribe subscribes the connection to the given patterns.
+func (c PubSubConn) PSubscribe(channel ...interface{}) error {
+	c.Conn.Send("PSUBSCRIBE", channel...)
+	return c.Conn.Flush()
+}
+
+// Unsubscribe unsubscribes the connection from the given channels, or from all
+// of them if none is given.
+func (c PubSubConn) Unsubscribe(channel ...interface{}) error {
+	c.Conn.Send("UNSUBSCRIBE", channel...)
+	return c.Conn.Flush()
+}
+
+// PUnsubscribe unsubscribes the connection from the given patterns, or from all
+// of them if none is given.
+func (c PubSubConn) PUnsubscribe(channel ...interface{}) error {
+	c.Conn.Send("PUNSUBSCRIBE", channel...)
+	return c.Conn.Flush()
+}
+
+// Receive returns a pushed message as a Subscription, Message, PMessage or
+// error. The return value is intended to be used directly in a type switch as
+// illustrated in the PubSubConn example.
+func (c PubSubConn) Receive() interface{} {
+	reply, err := Values(c.Conn.Receive())
+	if err != nil {
+		return err
+	}
+
+	var kind string
+	reply, err = Scan(reply, &kind)
+	if err != nil {
+		return err
+	}
+
+	switch kind {
+	case "message":
+		var m Message
+		if _, err := Scan(reply, &m.Channel, &m.Data); err != nil {
+			return err
+		}
+		return m
+	case "pmessage":
+		var pm PMessage
+		if _, err := Scan(reply, &pm.Pattern, &pm.Channel, &pm.Data); err != nil {
+			return err
+		}
+		return pm
+	case "subscribe", "psubscribe", "unsubscribe", "punsubscribe":
+		s := Subscription{Kind: kind}
+		if _, err := Scan(reply, &s.Channel, &s.Count); err != nil {
+			return err
+		}
+		return s
+	}
+	return errors.New("redigo: unknown pubsub notification")
+}

vendor/github.com/garyburd/redigo/redis/redis.go

@@ -0,0 +1,44 @@
+// Copyright 2012 Gary Burd
+//
+// Licensed under the Apache License, Version 2.0 (the "License"): you may
+// not use this file except in compliance with the License. You may obtain
+// a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+// License for the specific language governing permissions and limitations
+// under the License.
+
+package redis
+
+// Error represents an error returned in a command reply.
+type Error string
+
+func (err Error) Error() string { return string(err) }
+
+// Conn represents a connection to a Redis server.
+type Conn interface {
+	// Close closes the connection.
+	Close() error
+
+	// Err returns a non-nil value if the connection is broken. The returned
+	// value is either the first non-nil value returned from the underlying
+	// network connection or a protocol parsing error. Applications should
+	// close broken connections.
+	Err() error
+
+	// Do sends a command to the server and returns the received reply.
+	Do(commandName string, args ...interface{}) (reply interface{}, err error)
+
+	// Send writes the command to the client's output buffer.
+	Send(commandName string, args ...interface{}) error
+
+	// Flush flushes the output buffer to the Redis server.
+	Flush() error
+
+	// Receive receives a single reply from the Redis server
+	Receive() (reply interface{}, err error)
+}

vendor/github.com/garyburd/redigo/redis/reply.go

@@ -0,0 +1,312 @@
+// Copyright 2012 Gary Burd
+//
+// Licensed under the Apache License, Version 2.0 (the "License"): you may
+// not use this file except in compliance with the License. You may obtain
+// a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+// License for the specific language governing permissions and limitations
+// under the License.
+
+package redis
+
+import (
+	"errors"
+	"fmt"
+	"strconv"
+)
+
+// ErrNil indicates that a reply value is nil.
+var ErrNil = errors.New("redigo: nil returned")
+
+// Int is a helper that converts a command reply to an integer. If err is not
+// equal to nil, then Int returns 0, err. Otherwise, Int converts the
+// reply to an int as follows:
+//
+//  Reply type    Result
+//  integer       int(reply), nil
+//  bulk string   parsed reply, nil
+//  nil           0, ErrNil
+//  other         0, error
+func Int(reply interface{}, err error) (int, error) {
+	if err != nil {
+		return 0, err
+	}
+	switch reply := reply.(type) {
+	case int64:
+		x := int(reply)
+		if int64(x) != reply {
+			return 0, strconv.ErrRange
+		}
+		return x, nil
+	case []byte:
+		n, err := strconv.ParseInt(string(reply), 10, 0)
+		return int(n), err
+	case nil:
+		return 0, ErrNil
+	case Error:
+		return 0, reply
+	}
+	return 0, fmt.Errorf("redigo: unexpected type for Int, got type %T", reply)
+}
+
+// Int64 is a helper that converts a command reply to 64 bit integer. If err is
+// not equal to nil, then Int returns 0, err. Otherwise, Int64 converts the
+// reply to an int64 as follows:
+//
+//  Reply type    Result
+//  integer       reply, nil
+//  bulk string   parsed reply, nil
+//  nil           0, ErrNil
+//  other         0, error
+func Int64(reply interface{}, err error) (int64, error) {
+	if err != nil {
+		return 0, err
+	}
+	switch reply := reply.(type) {
+	case int64:
+		return reply, nil
+	case []byte:
+		n, err := strconv.ParseInt(string(reply), 10, 64)
+		return n, err
+	case nil:
+		return 0, ErrNil
+	case Error:
+		return 0, reply
+	}
+	return 0, fmt.Errorf("redigo: unexpected type for Int64, got type %T", reply)
+}
+
+var errNegativeInt = errors.New("redigo: unexpected value for Uint64")
+
+// Uint64 is a helper that converts a command reply to 64 bit integer. If err is
+// not equal to nil, then Int returns 0, err. Otherwise, Int64 converts the
+// reply to an int64 as follows:
+//
+//  Reply type    Result
+//  integer       reply, nil
+//  bulk string   parsed reply, nil
+//  nil           0, ErrNil
+//  other         0, error
+func Uint64(reply interface{}, err error) (uint64, error) {
+	if err != nil {
+		return 0, err
+	}
+	switch reply := reply.(type) {
+	case int64:
+		if reply < 0 {
+			return 0, errNegativeInt
+		}
+		return uint64(reply), nil
+	case []byte:
+		n, err := strconv.ParseUint(string(reply), 10, 64)
+		return n, err
+	case nil:
+		return 0, ErrNil
+	case Error:
+		return 0, reply
+	}
+	return 0, fmt.Errorf("redigo: unexpected type for Uint64, got type %T", reply)
+}
+
+// Float64 is a helper that converts a command reply to 64 bit float. If err is
+// not equal to nil, then Float64 returns 0, err. Otherwise, Float64 converts
+// the reply to an int as follows:
+//
+//  Reply type    Result
+//  bulk string   parsed reply, nil
+//  nil           0, ErrNil
+//  other         0, error
+func Float64(reply interface{}, err error) (float64, error) {
+	if err != nil {
+		return 0, err
+	}
+	switch reply := reply.(type) {
+	case []byte:
+		n, err := strconv.ParseFloat(string(reply), 64)
+		return n, err
+	case nil:
+		return 0, ErrNil
+	case Error:
+		return 0, reply
+	}
+	return 0, fmt.Errorf("redigo: unexpected type for Float64, got type %T", reply)
+}
+
+// String is a helper that converts a command reply to a string. If err is not
+// equal to nil, then String returns "", err. Otherwise String converts the
+// reply to a string as follows:
+//
+//  Reply type      Result
+//  bulk string     string(reply), nil
+//  simple string   reply, nil
+//  nil             "",  ErrNil
+//  other           "",  error
+func String(reply interface{}, err error) (string, error) {
+	if err != nil {
+		return "", err
+	}
+	switch reply := reply.(type) {
+	case []byte:
+		return string(reply), nil
+	case string:
+		return reply, nil
+	case nil:
+		return "", ErrNil
+	case Error:
+		return "", reply
+	}
+	return "", fmt.Errorf("redigo: unexpected type for String, got type %T", reply)
+}
+
+// Bytes is a helper that converts a command reply to a slice of bytes. If err
+// is not equal to nil, then Bytes returns nil, err. Otherwise Bytes converts
+// the reply to a slice of bytes as follows:
+//
+//  Reply type      Result
+//  bulk string     reply, nil
+//  simple string   []byte(reply), nil
+//  nil             nil, ErrNil
+//  other           nil, error
+func Bytes(reply interface{}, err error) ([]byte, error) {
+	if err != nil {
+		return nil, err
+	}
+	switch reply := reply.(type) {
+	case []byte:
+		return reply, nil
+	case string:
+		return []byte(reply), nil
+	case nil:
+		return nil, ErrNil
+	case Error:
+		return nil, reply
+	}
+	return nil, fmt.Errorf("redigo: unexpected type for Bytes, got type %T", reply)
+}
+
+// Bool is a helper that converts a command reply to a boolean. If err is not
+// equal to nil, then Bool returns false, err. Otherwise Bool converts the
+// reply to boolean as follows:
+//
+//  Reply type      Result
+//  integer         value != 0, nil
+//  bulk string     strconv.ParseBool(reply)
+//  nil             false, ErrNil
+//  other           false, error
+func Bool(reply interface{}, err error) (bool, error) {
+	if err != nil {
+		return false, err
+	}
+	switch reply := reply.(type) {
+	case int64:
+		return reply != 0, nil
+	case []byte:
+		return strconv.ParseBool(string(reply))
+	case nil:
+		return false, ErrNil
+	case Error:
+		return false, reply
+	}
+	return false, fmt.Errorf("redigo: unexpected type for Bool, got type %T", reply)
+}
+
+// MultiBulk is deprecated. Use Values.
+func MultiBulk(reply interface{}, err error) ([]interface{}, error) { return Values(reply, err) }
+
+// Values is a helper that converts an array command reply to a []interface{}.
+// If err is not equal to nil, then Values returns nil, err. Otherwise, Values
+// converts the reply as follows:
+//
+//  Reply type      Result
+//  array           reply, nil
+//  nil             nil, ErrNil
+//  other           nil, error
+func Values(reply interface{}, err error) ([]interface{}, error) {
+	if err != nil {
+		return nil, err
+	}
+	switch reply := reply.(type) {
+	case []interface{}:
+		return reply, nil
+	case nil:
+		return nil, ErrNil
+	case Error:
+		return nil, reply
+	}
+	return nil, fmt.Errorf("redigo: unexpected type for Values, got type %T", reply)
+}
+
+// Strings is a helper that converts an array command reply to a []string. If
+// err is not equal to nil, then Strings returns nil, err. Nil array items are
+// converted to "" in the output slice. Strings returns an error if an array
+// item is not a bulk string or nil.
+func Strings(reply interface{}, err error) ([]string, error) {
+	if err != nil {
+		return nil, err
+	}
+	switch reply := reply.(type) {
+	case []interface{}:
+		result := make([]string, len(reply))
+		for i := range reply {
+			if reply[i] == nil {
+				continue
+			}
+			p, ok := reply[i].([]byte)
+			if !ok {
+				return nil, fmt.Errorf("redigo: unexpected element type for Strings, got type %T", reply[i])
+			}
+			result[i] = string(p)
+		}
+		return result, nil
+	case nil:
+		return nil, ErrNil
+	case Error:
+		return nil, reply
+	}
+	return nil, fmt.Errorf("redigo: unexpected type for Strings, got type %T", reply)
+}
+
+// Ints is a helper that converts an array command reply to a []int. If
+// err is not equal to nil, then Ints returns nil, err.
+func Ints(reply interface{}, err error) ([]int, error) {
+	var ints []int
+	if reply == nil {
+		return ints, ErrNil
+	}
+	values, err := Values(reply, err)
+	if err != nil {
+		return ints, err
+	}
+	if err := ScanSlice(values, &ints); err != nil {
+		return ints, err
+	}
+	return ints, nil
+}
+
+// StringMap is a helper that converts an array of strings (alternating key, value)
+// into a map[string]string. The HGETALL and CONFIG GET commands return replies in this format.
+// Requires an even number of values in result.
+func StringMap(result interface{}, err error) (map[string]string, error) {
+	values, err := Values(result, err)
+	if err != nil {
+		return nil, err
+	}
+	if len(values)%2 != 0 {
+		return nil, errors.New("redigo: StringMap expects even number of values result")
+	}
+	m := make(map[string]string, len(values)/2)
+	for i := 0; i < len(values); i += 2 {
+		key, okKey := values[i].([]byte)
+		value, okValue := values[i+1].([]byte)
+		if !okKey || !okValue {
+			return nil, errors.New("redigo: ScanMap key not a bulk string value")
+		}
+		m[string(key)] = string(value)
+	}
+	return m, nil
+}

vendor/github.com/garyburd/redigo/redis/scan.go

@@ -0,0 +1,513 @@
+// Copyright 2012 Gary Burd
+//
+// Licensed under the Apache License, Version 2.0 (the "License"): you may
+// not use this file except in compliance with the License. You may obtain
+// a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+// License for the specific language governing permissions and limitations
+// under the License.
+
+package redis
+
+import (
+	"errors"
+	"fmt"
+	"reflect"
+	"strconv"
+	"strings"
+	"sync"
+)
+
+func ensureLen(d reflect.Value, n int) {
+	if n > d.Cap() {
+		d.Set(reflect.MakeSlice(d.Type(), n, n))
+	} else {
+		d.SetLen(n)
+	}
+}
+
+func cannotConvert(d reflect.Value, s interface{}) error {
+	return fmt.Errorf("redigo: Scan cannot convert from %s to %s",
+		reflect.TypeOf(s), d.Type())
+}
+
+func convertAssignBytes(d reflect.Value, s []byte) (err error) {
+	switch d.Type().Kind() {
+	case reflect.Float32, reflect.Float64:
+		var x float64
+		x, err = strconv.ParseFloat(string(s), d.Type().Bits())
+		d.SetFloat(x)
+	case reflect.Int, reflect.Int8, reflect.Int16, reflect.Int32, reflect.Int64:
+		var x int64
+		x, err = strconv.ParseInt(string(s), 10, d.Type().Bits())
+		d.SetInt(x)
+	case reflect.Uint, reflect.Uint8, reflect.Uint16, reflect.Uint32, reflect.Uint64:
+		var x uint64
+		x, err = strconv.ParseUint(string(s), 10, d.Type().Bits())
+		d.SetUint(x)
+	case reflect.Bool:
+		var x bool
+		x, err = strconv.ParseBool(string(s))
+		d.SetBool(x)
+	case reflect.String:
+		d.SetString(string(s))
+	case reflect.Slice:
+		if d.Type().Elem().Kind() != reflect.Uint8 {
+			err = cannotConvert(d, s)
+		} else {
+			d.SetBytes(s)
+		}
+	default:
+		err = cannotConvert(d, s)
+	}
+	return
+}
+
+func convertAssignInt(d reflect.Value, s int64) (err error) {
+	switch d.Type().Kind() {
+	case reflect.Int, reflect.Int8, reflect.Int16, reflect.Int32, reflect.Int64:
+		d.SetInt(s)
+		if d.Int() != s {
+			err = strconv.ErrRange
+			d.SetInt(0)
+		}
+	case reflect.Uint, reflect.Uint8, reflect.Uint16, reflect.Uint32, reflect.Uint64:
+		if s < 0 {
+			err = strconv.ErrRange
+		} else {
+			x := uint64(s)
+			d.SetUint(x)
+			if d.Uint() != x {
+				err = strconv.ErrRange
+				d.SetUint(0)
+			}
+		}
+	case reflect.Bool:
+		d.SetBool(s != 0)
+	default:
+		err = cannotConvert(d, s)
+	}
+	return
+}
+
+func convertAssignValue(d reflect.Value, s interface{}) (err error) {
+	switch s := s.(type) {
+	case []byte:
+		err = convertAssignBytes(d, s)
+	case int64:
+		err = convertAssignInt(d, s)
+	default:
+		err = cannotConvert(d, s)
+	}
+	return err
+}
+
+func convertAssignValues(d reflect.Value, s []interface{}) error {
+	if d.Type().Kind() != reflect.Slice {
+		return cannotConvert(d, s)
+	}
+	ensureLen(d, len(s))
+	for i := 0; i < len(s); i++ {
+		if err := convertAssignValue(d.Index(i), s[i]); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+func convertAssign(d interface{}, s interface{}) (err error) {
+	// Handle the most common destination types using type switches and
+	// fall back to reflection for all other types.
+	switch s := s.(type) {
+	case nil:
+		// ingore
+	case []byte:
+		switch d := d.(type) {
+		case *string:
+			*d = string(s)
+		case *int:
+			*d, err = strconv.Atoi(string(s))
+		case *bool:
+			*d, err = strconv.ParseBool(string(s))
+		case *[]byte:
+			*d = s
+		case *interface{}:
+			*d = s
+		case nil:
+			// skip value
+		default:
+			if d := reflect.ValueOf(d); d.Type().Kind() != reflect.Ptr {
+				err = cannotConvert(d, s)
+			} else {
+				err = convertAssignBytes(d.Elem(), s)
+			}
+		}
+	case int64:
+		switch d := d.(type) {
+		case *int:
+			x := int(s)
+			if int64(x) != s {
+				err = strconv.ErrRange
+				x = 0
+			}
+			*d = x
+		case *bool:
+			*d = s != 0
+		case *interface{}:
+			*d = s
+		case nil:
+			// skip value
+		default:
+			if d := reflect.ValueOf(d); d.Type().Kind() != reflect.Ptr {
+				err = cannotConvert(d, s)
+			} else {
+				err = convertAssignInt(d.Elem(), s)
+			}
+		}
+	case []interface{}:
+		switch d := d.(type) {
+		case *[]interface{}:
+			*d = s
+		case *interface{}:
+			*d = s
+		case nil:
+			// skip value
+		default:
+			if d := reflect.ValueOf(d); d.Type().Kind() != reflect.Ptr {
+				err = cannotConvert(d, s)
+			} else {
+				err = convertAssignValues(d.Elem(), s)
+			}
+		}
+	case Error:
+		err = s
+	default:
+		err = cannotConvert(reflect.ValueOf(d), s)
+	}
+	return
+}
+
+// Scan copies from src to the values pointed at by dest.
+//
+// The values pointed at by dest must be an integer, float, boolean, string,
+// []byte, interface{} or slices of these types. Scan uses the standard strconv
+// package to convert bulk strings to numeric and boolean types.
+//
+// If a dest value is nil, then the corresponding src value is skipped.
+//
+// If a src element is nil, then the corresponding dest value is not modified.
+//
+// To enable easy use of Scan in a loop, Scan returns the slice of src
+// following the copied values.
+func Scan(src []interface{}, dest ...interface{}) ([]interface{}, error) {
+	if len(src) < len(dest) {
+		return nil, errors.New("redigo: Scan array short")
+	}
+	var err error
+	for i, d := range dest {
+		err = convertAssign(d, src[i])
+		if err != nil {
+			break
+		}
+	}
+	return src[len(dest):], err
+}
+
+type fieldSpec struct {
+	name  string
+	index []int
+	//omitEmpty bool
+}
+
+type structSpec struct {
+	m map[string]*fieldSpec
+	l []*fieldSpec
+}
+
+func (ss *structSpec) fieldSpec(name []byte) *fieldSpec {
+	return ss.m[string(name)]
+}
+
+func compileStructSpec(t reflect.Type, depth map[string]int, index []int, ss *structSpec) {
+	for i := 0; i < t.NumField(); i++ {
+		f := t.Field(i)
+		switch {
+		case f.PkgPath != "":
+			// Ignore unexported fields.
+		case f.Anonymous:
+			// TODO: Handle pointers. Requires change to decoder and
+			// protection against infinite recursion.
+			if f.Type.Kind() == reflect.Struct {
+				compileStructSpec(f.Type, depth, append(index, i), ss)
+			}
+		default:
+			fs := &fieldSpec{name: f.Name}
+			tag := f.Tag.Get("redis")
+			p := strings.Split(tag, ",")
+			if len(p) > 0 {
+				if p[0] == "-" {
+					continue
+				}
+				if len(p[0]) > 0 {
+					fs.name = p[0]
+				}
+				for _, s := range p[1:] {
+					switch s {
+					//case "omitempty":
+					//  fs.omitempty = true
+					default:
+						panic(errors.New("redigo: unknown field flag " + s + " for type " + t.Name()))
+					}
+				}
+			}
+			d, found := depth[fs.name]
+			if !found {
+				d = 1 << 30
+			}
+			switch {
+			case len(index) == d:
+				// At same depth, remove from result.
+				delete(ss.m, fs.name)
+				j := 0
+				for i := 0; i < len(ss.l); i++ {
+					if fs.name != ss.l[i].name {
+						ss.l[j] = ss.l[i]
+						j += 1
+					}
+				}
+				ss.l = ss.l[:j]
+			case len(index) < d:
+				fs.index = make([]int, len(index)+1)
+				copy(fs.index, index)
+				fs.index[len(index)] = i
+				depth[fs.name] = len(index)
+				ss.m[fs.name] = fs
+				ss.l = append(ss.l, fs)
+			}
+		}
+	}
+}
+
+var (
+	structSpecMutex  sync.RWMutex
+	structSpecCache  = make(map[reflect.Type]*structSpec)
+	defaultFieldSpec = &fieldSpec{}
+)
+
+func structSpecForType(t reflect.Type) *structSpec {
+
+	structSpecMutex.RLock()
+	ss, found := structSpecCache[t]
+	structSpecMutex.RUnlock()
+	if found {
+		return ss
+	}
+
+	structSpecMutex.Lock()
+	defer structSpecMutex.Unlock()
+	ss, found = structSpecCache[t]
+	if found {
+		return ss
+	}
+
+	ss = &structSpec{m: make(map[string]*fieldSpec)}
+	compileStructSpec(t, make(map[string]int), nil, ss)
+	structSpecCache[t] = ss
+	return ss
+}
+
+var errScanStructValue = errors.New("redigo: ScanStruct value must be non-nil pointer to a struct")
+
+// ScanStruct scans alternating names and values from src to a struct. The
+// HGETALL and CONFIG GET commands return replies in this format.
+//
+// ScanStruct uses exported field names to match values in the response. Use
+// 'redis' field tag to override the name:
+//
+//      Field int `redis:"myName"`
+//
+// Fields with the tag redis:"-" are ignored.
+//
+// Integer, float, boolean, string and []byte fields are supported. Scan uses the
+// standard strconv package to convert bulk string values to numeric and
+// boolean types.
+//
+// If a src element is nil, then the corresponding field is not modified.
+func ScanStruct(src []interface{}, dest interface{}) error {
+	d := reflect.ValueOf(dest)
+	if d.Kind() != reflect.Ptr || d.IsNil() {
+		return errScanStructValue
+	}
+	d = d.Elem()
+	if d.Kind() != reflect.Struct {
+		return errScanStructValue
+	}
+	ss := structSpecForType(d.Type())
+
+	if len(src)%2 != 0 {
+		return errors.New("redigo: ScanStruct expects even number of values in values")
+	}
+
+	for i := 0; i < len(src); i += 2 {
+		s := src[i+1]
+		if s == nil {
+			continue
+		}
+		name, ok := src[i].([]byte)
+		if !ok {
+			return errors.New("redigo: ScanStruct key not a bulk string value")
+		}
+		fs := ss.fieldSpec(name)
+		if fs == nil {
+			continue
+		}
+		if err := convertAssignValue(d.FieldByIndex(fs.index), s); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+var (
+	errScanSliceValue = errors.New("redigo: ScanSlice dest must be non-nil pointer to a struct")
+)
+
+// ScanSlice scans src to the slice pointed to by dest. The elements the dest
+// slice must be integer, float, boolean, string, struct or pointer to struct
+// values.
+//
+// Struct fields must be integer, float, boolean or string values. All struct
+// fields are used unless a subset is specified using fieldNames.
+func ScanSlice(src []interface{}, dest interface{}, fieldNames ...string) error {
+	d := reflect.ValueOf(dest)
+	if d.Kind() != reflect.Ptr || d.IsNil() {
+		return errScanSliceValue
+	}
+	d = d.Elem()
+	if d.Kind() != reflect.Slice {
+		return errScanSliceValue
+	}
+
+	isPtr := false
+	t := d.Type().Elem()
+	if t.Kind() == reflect.Ptr && t.Elem().Kind() == reflect.Struct {
+		isPtr = true
+		t = t.Elem()
+	}
+
+	if t.Kind() != reflect.Struct {
+		ensureLen(d, len(src))
+		for i, s := range src {
+			if s == nil {
+				continue
+			}
+			if err := convertAssignValue(d.Index(i), s); err != nil {
+				return err
+			}
+		}
+		return nil
+	}
+
+	ss := structSpecForType(t)
+	fss := ss.l
+	if len(fieldNames) > 0 {
+		fss = make([]*fieldSpec, len(fieldNames))
+		for i, name := range fieldNames {
+			fss[i] = ss.m[name]
+			if fss[i] == nil {
+				return errors.New("redigo: ScanSlice bad field name " + name)
+			}
+		}
+	}
+
+	if len(fss) == 0 {
+		return errors.New("redigo: ScanSlice no struct fields")
+	}
+
+	n := len(src) / len(fss)
+	if n*len(fss) != len(src) {
+		return errors.New("redigo: ScanSlice length not a multiple of struct field count")
+	}
+
+	ensureLen(d, n)
+	for i := 0; i < n; i++ {
+		d := d.Index(i)
+		if isPtr {
+			if d.IsNil() {
+				d.Set(reflect.New(t))
+			}
+			d = d.Elem()
+		}
+		for j, fs := range fss {
+			s := src[i*len(fss)+j]
+			if s == nil {
+				continue
+			}
+			if err := convertAssignValue(d.FieldByIndex(fs.index), s); err != nil {
+				return err
+			}
+		}
+	}
+	return nil
+}
+
+// Args is a helper for constructing command arguments from structured values.
+type Args []interface{}
+
+// Add returns the result of appending value to args.
+func (args Args) Add(value ...interface{}) Args {
+	return append(args, value...)
+}
+
+// AddFlat returns the result of appending the flattened value of v to args.
+//
+// Maps are flattened by appending the alternating keys and map values to args.
+//
+// Slices are flattened by appending the slice elements to args.
+//
+// Structs are flattened by appending the alternating names and values of
+// exported fields to args. If v is a nil struct pointer, then nothing is
+// appended. The 'redis' field tag overrides struct field names. See ScanStruct
+// for more information on the use of the 'redis' field tag.
+//
+// Other types are appended to args as is.
+func (args Args) AddFlat(v interface{}) Args {
+	rv := reflect.ValueOf(v)
+	switch rv.Kind() {
+	case reflect.Struct:
+		args = flattenStruct(args, rv)
+	case reflect.Slice:
+		for i := 0; i < rv.Len(); i++ {
+			args = append(args, rv.Index(i).Interface())
+		}
+	case reflect.Map:
+		for _, k := range rv.MapKeys() {
+			args = append(args, k.Interface(), rv.MapIndex(k).Interface())
+		}
+	case reflect.Ptr:
+		if rv.Type().Elem().Kind() == reflect.Struct {
+			if !rv.IsNil() {
+				args = flattenStruct(args, rv.Elem())
+			}
+		} else {
+			args = append(args, v)
+		}
+	default:
+		args = append(args, v)
+	}
+	return args
+}
+
+func flattenStruct(args Args, v reflect.Value) Args {
+	ss := structSpecForType(v.Type())
+	for _, fs := range ss.l {
+		fv := v.FieldByIndex(fs.index)
+		args = append(args, fs.name, fv.Interface())
+	}
+	return args
+}

vendor/github.com/garyburd/redigo/redis/script.go

@@ -0,0 +1,86 @@
+// Copyright 2012 Gary Burd
+//
+// Licensed under the Apache License, Version 2.0 (the "License"): you may
+// not use this file except in compliance with the License. You may obtain
+// a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+// License for the specific language governing permissions and limitations
+// under the License.
+
+package redis
+
+import (
+	"crypto/sha1"
+	"encoding/hex"
+	"io"
+	"strings"
+)
+
+// Script encapsulates the source, hash and key count for a Lua script. See
+// http://redis.io/commands/eval for information on scripts in Redis.
+type Script struct {
+	keyCount int
+	src      string
+	hash     string
+}
+
+// NewScript returns a new script object. If keyCount is greater than or equal
+// to zero, then the count is automatically inserted in the EVAL command
+// argument list. If keyCount is less than zero, then the application supplies
+// the count as the first value in the keysAndArgs argument to the Do, Send and
+// SendHash methods.
+func NewScript(keyCount int, src string) *Script {
+	h := sha1.New()
+	io.WriteString(h, src)
+	return &Script{keyCount, src, hex.EncodeToString(h.Sum(nil))}
+}
+
+func (s *Script) args(spec string, keysAndArgs []interface{}) []interface{} {
+	var args []interface{}
+	if s.keyCount < 0 {
+		args = make([]interface{}, 1+len(keysAndArgs))
+		args[0] = spec
+		copy(args[1:], keysAndArgs)
+	} else {
+		args = make([]interface{}, 2+len(keysAndArgs))
+		args[0] = spec
+		args[1] = s.keyCount
+		copy(args[2:], keysAndArgs)
+	}
+	return args
+}
+
+// Do evaluates the script. Under the covers, Do optimistically evaluates the
+// script using the EVALSHA command. If the command fails because the script is
+// not loaded, then Do evaluates the script using the EVAL command (thus
+// causing the script to load).
+func (s *Script) Do(c Conn, keysAndArgs ...interface{}) (interface{}, error) {
+	v, err := c.Do("EVALSHA", s.args(s.hash, keysAndArgs)...)
+	if e, ok := err.(Error); ok && strings.HasPrefix(string(e), "NOSCRIPT ") {
+		v, err = c.Do("EVAL", s.args(s.src, keysAndArgs)...)
+	}
+	return v, err
+}
+
+// SendHash evaluates the script without waiting for the reply. The script is
+// evaluated with the EVALSHA command. The application must ensure that the
+// script is loaded by a previous call to Send, Do or Load methods.
+func (s *Script) SendHash(c Conn, keysAndArgs ...interface{}) error {
+	return c.Send("EVALSHA", s.args(s.hash, keysAndArgs)...)
+}
+
+// Send evaluates the script without waiting for the reply.
+func (s *Script) Send(c Conn, keysAndArgs ...interface{}) error {
+	return c.Send("EVAL", s.args(s.src, keysAndArgs)...)
+}
+
+// Load loads the script without evaluating it.
+func (s *Script) Load(c Conn) error {
+	_, err := c.Do("SCRIPT", "LOAD", s.src)
+	return err
+}