diff --git a/docs/devel/e2e-tests.md b/docs/devel/e2e-tests.md
index 50163815332..a9c440c73ef 100644
--- a/docs/devel/e2e-tests.md
+++ b/docs/devel/e2e-tests.md
@@ -185,7 +185,6 @@ We are working on implementing clearer partitioning of our e2e tests to make run
 - `[Serial]`: If a test cannot be run in parallel with other tests (e.g. it takes too many resources or restarts nodes), it is labeled `[Serial]`, and should be run in serial as part of a separate suite.
 - `[Disruptive]`: If a test restarts components that might cause other tests to fail or break the cluster completely, it is labeled `[Disruptive]`.  Any `[Disruptive]` test is also assumed to qualify for the `[Serial]` label, but need not be labeled as both.  These tests are not run against soak clusters to avoid restarting components.
 - `[Flaky]`: If a test is found to be flaky and we have decided that it's too hard to fix in the short term (e.g. it's going to take a full engineer-week), it receives the `[Flaky]` label until it is fixed.  The `[Flaky]` label should be used very sparingly, and should be accompanied with a reference to the issue for de-flaking the test, because while a test remains labeled `[Flaky]`, it is not monitored closely in CI. `[Flaky]` tests are by default not run, unless a `focus` or `skip` argument is explicitly given.
-- `[Skipped]`: `[Skipped]` is a legacy label that we're phasing out.  If a test is marked `[Skipped]`, there should be an issue open to label it properly.  `[Skipped]` tests are by default not run, unless a `focus` or `skip` argument is explicitly given.
 - `[Feature:.+]`: If a test has non-default requirements to run or targets some non-core functionality, and thus should not be run as part of the standard suite, it receives a `[Feature:.+]` label, e.g. `[Feature:Performance]` or `[Feature:Ingress]`.  `[Feature:.+]` tests are not run in our core suites, instead running in custom suites. If a feature is experimental or alpha and is not enabled by default due to being incomplete or potentially subject to breaking changes, it does *not* block the merge-queue, and thus should run in some separate test suites owned by the feature owner(s) (see #continuous_integration below).
 
 ### Conformance tests
diff --git a/hack/conformance-test.sh b/hack/conformance-test.sh
index 641c810c87d..17453200fe5 100755
--- a/hack/conformance-test.sh
+++ b/hack/conformance-test.sh
@@ -84,4 +84,4 @@ echo "Conformance test checking conformance with Kubernetes version 1.0"
 
 declare -x KUBERNETES_CONFORMANCE_TEST="y"
 declare -x NUM_NODES=4
-exec hack/ginkgo-e2e.sh -ginkgo.focus='\[Conformance\]' -ginkgo.skip='\[Skipped\]' ${TEST_ARGS}
+exec hack/ginkgo-e2e.sh -ginkgo.focus='\[Conformance\]' ${TEST_ARGS}
diff --git a/hack/jenkins/e2e.sh b/hack/jenkins/e2e.sh
index 729b8ba0553..47fcdd7a3dd 100755
--- a/hack/jenkins/e2e.sh
+++ b/hack/jenkins/e2e.sh
@@ -225,8 +225,7 @@ case ${JOB_NAME} in
     : ${E2E_NETWORK:="e2e-gce-${NODE_NAME}-${EXECUTOR_NUMBER}"}
     : ${GINKGO_PARALLEL:="y"}
     # This list should match the list in kubernetes-e2e-gce.
-    # TODO(ihmccreery) remove [Skipped] once tests are relabeled
-    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Slow\]|\[Serial\]|\[Disruptive\]|\[Flaky\]|\[Feature:.+\]|\[Skipped\]"}
+    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Slow\]|\[Serial\]|\[Disruptive\]|\[Flaky\]|\[Feature:.+\]"}
     : ${KUBE_GCE_INSTANCE_PREFIX:="e2e-gce-${NODE_NAME}-${EXECUTOR_NUMBER}"}
     : ${PROJECT:="kubernetes-jenkins-pull"}
     # Override GCE defaults
@@ -241,8 +240,7 @@ case ${JOB_NAME} in
     : ${E2E_PUBLISH_GREEN_VERSION:="true"}
     : ${E2E_NETWORK:="e2e-gce"}
     # This list should match the list in kubernetes-pull-build-test-e2e-gce.
-    # TODO(ihmccreery) remove [Skipped] once tests are relabeled
-    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Slow\]|\[Serial\]|\[Disruptive\]|\[Flaky\]|\[Feature:.+\]|\[Skipped\]"}
+    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Slow\]|\[Serial\]|\[Disruptive\]|\[Flaky\]|\[Feature:.+\]"}
     : ${GINKGO_PARALLEL:="y"}
     : ${KUBE_GCE_INSTANCE_PREFIX="e2e-gce"}
     : ${PROJECT:="k8s-jkns-e2e-gce"}
@@ -253,9 +251,8 @@ case ${JOB_NAME} in
   kubernetes-e2e-gce-slow)
     : ${E2E_CLUSTER_NAME:="jenkins-gce-e2e-slow"}
     : ${E2E_NETWORK:="e2e-slow"}
-    # TODO(ihmccreery) remove [Skipped] once tests are relabeled
     : ${GINKGO_TEST_ARGS:="--ginkgo.focus=\[Slow\] \
-                           --ginkgo.skip=\[Serial\]|\[Disruptive\]|\[Flaky\]|\[Feature:.+\]|\[Skipped\]"}
+                           --ginkgo.skip=\[Serial\]|\[Disruptive\]|\[Flaky\]|\[Feature:.+\]"}
     : ${GINKGO_PARALLEL:="y"}
     : ${KUBE_GCE_INSTANCE_PREFIX:="e2e-slow"}
     : ${PROJECT:="k8s-jkns-e2e-gce-slow"}
@@ -304,9 +301,8 @@ case ${JOB_NAME} in
   kubernetes-e2e-gce-flaky)
     : ${E2E_CLUSTER_NAME:="jenkins-gce-e2e-flaky"}
     : ${E2E_NETWORK:="e2e-flaky"}
-    # TODO(ihmccreery) remove [Skipped] once tests are relabeled
     : ${GINKGO_TEST_ARGS:="--ginkgo.focus=\[Flaky\] \
-                           --ginkgo.skip=\[Feature:.+\]|\[Skipped\]"}
+                           --ginkgo.skip=\[Feature:.+\]"}
     : ${KUBE_GCE_INSTANCE_PREFIX:="e2e-flaky"}
     : ${PROJECT:="k8s-jkns-e2e-gce-flaky"}
     : ${FAIL_ON_GCP_RESOURCE_LEAK:="true"}
@@ -318,9 +314,8 @@ case ${JOB_NAME} in
     : ${E2E_CLUSTER_NAME:="parallel-flaky"}
     : ${E2E_NETWORK:="e2e-parallel-flaky"}
     : ${GINKGO_PARALLEL:="y"}
-    # TODO(ihmccreery) remove [Skipped] once tests are relabeled
     : ${GINKGO_TEST_ARGS:="--ginkgo.focus=\[Flaky\] \
-                           --ginkgo.skip=\[Serial\]|\[Disruptive\]|\[Feature:.+\]|\[Skipped\]"}
+                           --ginkgo.skip=\[Serial\]|\[Disruptive\]|\[Feature:.+\]"}
     : ${KUBE_GCE_INSTANCE_PREFIX:="parallel-flaky"}
     : ${PROJECT:="k8s-jkns-e2e-gce-prl-flaky"}
     : ${FAIL_ON_GCP_RESOURCE_LEAK:="true"}
@@ -337,8 +332,7 @@ case ${JOB_NAME} in
     : ${E2E_SET_CLUSTER_API_VERSION:=y}
     : ${PROJECT:="k8s-jkns-e2e-gke-ci"}
     : ${FAIL_ON_GCP_RESOURCE_LEAK:="true"}
-    # TODO(ihmccreery) remove [Skipped] once tests are relabeled
-    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Slow\]|\[Serial\]|\[Disruptive\]|\[Flaky\]|\[Feature:.+\]|\[Skipped\]"}
+    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Slow\]|\[Serial\]|\[Disruptive\]|\[Flaky\]|\[Feature:.+\]"}
     : ${GINKGO_PARALLEL:="y"}
     ;;
 
@@ -348,9 +342,8 @@ case ${JOB_NAME} in
     : ${E2E_SET_CLUSTER_API_VERSION:=y}
     : ${PROJECT:="k8s-jkns-e2e-gke-slow"}
     : ${FAIL_ON_GCP_RESOURCE_LEAK:="true"}
-    # TODO(ihmccreery) remove [Skipped] once tests are relabeled
     : ${GINKGO_TEST_ARGS:="--ginkgo.focus=\[Slow\] \
-                           --ginkgo.skip=\[Serial\]|\[Disruptive\]|\[Flaky\]|\[Feature:.+\]|\[Skipped\]"}
+                           --ginkgo.skip=\[Serial\]|\[Disruptive\]|\[Flaky\]|\[Feature:.+\]"}
     : ${GINKGO_PARALLEL:="y"}
     ;;
 
@@ -371,9 +364,8 @@ case ${JOB_NAME} in
     : ${E2E_SET_CLUSTER_API_VERSION:=y}
     : ${PROJECT:="k8s-jkns-e2e-gke-ci-flaky"}
     : ${FAIL_ON_GCP_RESOURCE_LEAK:="true"}
-    # TODO(ihmccreery) remove [Skipped] once tests are relabeled
     : ${GINKGO_TEST_ARGS:="--ginkgo.focus=\[Flaky\] \
-                           --ginkgo.skip=\[Feature:.+\]|\[Skipped\]"}
+                           --ginkgo.skip=\[Feature:.+\]"}
     ;;
 
   # AWS core jobs
@@ -385,8 +377,7 @@ case ${JOB_NAME} in
     : ${E2E_ZONE:="us-west-2a"}
     : ${ZONE:="us-west-2a"}
     : ${E2E_NETWORK:="e2e-aws"}
-    # TODO(ihmccreery) remove [Skipped] once tests are relabeled
-    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Slow\]|\[Serial\]|\[Disruptive\]|\[Flaky\]|\[Feature:.+\]|\[Skipped\]"}
+    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Slow\]|\[Serial\]|\[Disruptive\]|\[Flaky\]|\[Feature:.+\]"}
     : ${GINKGO_PARALLEL:="y"}
     : ${KUBE_GCE_INSTANCE_PREFIX="e2e-aws"}
     : ${PROJECT:="k8s-jkns-e2e-aws"}
@@ -619,9 +610,7 @@ case ${JOB_NAME} in
     # We should be testing the reliability of a long-running cluster. The
     # [Disruptive] tests kill/restart components or nodes in the cluster,
     # defeating the purpose of a soak cluster. (#15722)
-    #
-    # TODO(ihmccreery) remove [Skipped] once tests are relabeled
-    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Disruptive\]|\[Flaky\]|\[Feature:.+\]|\[Skipped\]"}
+    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Disruptive\]|\[Flaky\]|\[Feature:.+\]"}
     : ${KUBE_GCE_INSTANCE_PREFIX:="gce-soak-weekly"}
     : ${HAIRPIN_MODE:="false"}
     : ${PROJECT:="kubernetes-jenkins"}
@@ -649,9 +638,7 @@ case ${JOB_NAME} in
     # We should be testing the reliability of a long-running cluster. The
     # [Disruptive] tests kill/restart components or nodes in the cluster,
     # defeating the purpose of a soak cluster. (#15722)
-    #
-    # TODO(ihmccreery) remove [Skipped] once tests are relabeled
-    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Disruptive\]|\[Flaky\]|\[Feature:.+\]|\[Skipped\]"}
+    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Disruptive\]|\[Flaky\]|\[Feature:.+\]"}
     : ${KUBE_GCE_INSTANCE_PREFIX:="gce-soak-weekly-2"}
     : ${PROJECT:="kubernetes-jenkins"}
     ;;
@@ -683,9 +670,7 @@ case ${JOB_NAME} in
     # We should be testing the reliability of a long-running cluster. The
     # [Disruptive] tests kill/restart components or nodes in the cluster,
     # defeating the purpose of a soak cluster. (#15722)
-    #
-    # TODO(ihmccreery) remove [Skipped] once tests are relabeled
-    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Disruptive\]|\[Flaky\]|\[Feature:.+\]|\[Skipped\]"}
+    : ${GINKGO_TEST_ARGS:="--ginkgo.skip=\[Disruptive\]|\[Flaky\]|\[Feature:.+\]"}
     ;;
 
   # Upgrade jobs
diff --git a/test/e2e/e2e.go b/test/e2e/e2e.go
index 58a010eea52..b76d63d7160 100644
--- a/test/e2e/e2e.go
+++ b/test/e2e/e2e.go
@@ -221,8 +221,7 @@ func RunE2ETests(t *testing.T) {
 	gomega.RegisterFailHandler(ginkgo.Fail)
 	// Disable skipped tests unless they are explicitly requested.
 	if config.GinkgoConfig.FocusString == "" && config.GinkgoConfig.SkipString == "" {
-		// TODO(ihmccreery) Remove [Skipped] once all [Skipped] labels have been reclassified.
-		config.GinkgoConfig.SkipString = `\[Flaky\]|\[Skipped\]|\[Feature:.+\]`
+		config.GinkgoConfig.SkipString = `\[Flaky\]|\[Feature:.+\]`
 	}
 
 	// Run tests through the Ginkgo runner with output to console + JUnit for Jenkins